Latest wooden platform Tenders | Government wooden platform Tenders

Central Government And Public Sector

CTN :45723977

07 Jul, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of depot miscellaneousellaneous scrap - lot of scrap wooden consisting of miscellaneous sorts and off sizes wooden furniture, material almirah, window, table, chair,packing wood, damaged plywood, wooden boxes with iron attachment and wooden pallets,wooden items with or without dismantle broken condition and with or without iron, cushion and slightly nf/f and other attachment.as available as in the lot. cutting or breaking allow only for loading pupose. (p.l. no-98410088). remarks:- if any non ferrous items found during delivery it should be removed from lot and purchaser should be handed over to the stock holder.

CTN :45419515

02 Jul, 2026 NA

Parganas - West Bengal

Tender For bid to ras supply of wooden platform with ms structure at gms section to drg. no. gms-320 as per scope of work.

CTN :45720616

15 Jul, 2026 10.00 Lacs

Tikamgarh - Madhya Pradesh

Tender For supply of tant material (rent) for ulb financial year 2026-27 -64-pole quadrilateral tent; round-top tent (3-pole & 1-pole); standard pandal/shamiana (15x15); round-top pandal (15x30); pipe pandal dome (15x60); standard pipe pandal (14x82); waterproof round-top pandal (15x30 & 15x60); waterproof pandal (14x82); flooring (15x15, 30x30, 30x60); green carpet flooring (15x15); red carpet flooring (15x15); vip green carpet flooring (15x15); vip red carpet flooring (15x15); standard carpet (15x15); standard gate; india gate; vip round bolster with cover; stage (floral/garlanded); plain stage; decorative archway; standard tent curtain; gate & window curtain; standard foam mattress with cover; vip foam mattress with cover; standard cotton mattress; vip cotton mattress with cover; standard quilt; vip quilt with cover; standard round bolster with cover. vip round cushion with cover, plain cushion with cover, vip cushion with cover, wooden platform/cot, super quality bedsheet, standard quality bedsheet, plain fiber chair, fiber chair with cover, vip steel chair with cushioning, steel sofa with cushioning and cover, wooden sofa with cushioning and cover, plain table, table with cover, table leg cover, plain round table, round table with cover, wooden desk, steel desk, small mic set, large mic set, small mic set (including battery, amplifier, and 2 small speakers), cordless mic set, standard mic, small mic stand, large mic stand, steel water tank with lid, fiber water tank with lid, fiber water drum with lid, steel jug, steel jug with lid, fiber jug, fiber jug with lid, steel glass, glass tumbler, fiber glass/tumbler, fiber plate, steel plate, steel basin/pan, steel tray, steel spoon, steel bucket, small cooking pot with lid, large cooking pot with lid.

Central Government/Public Sector

CTN :45377147

07 Jul, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : providing of custom bid for services - work package for relocation of kiran and jaguar stores : "100% physical stock verification, packing, shifting, transportation, dismantling & re-installation of storage racks along with associated wooden platform, and re-conciliation of inventory from the

State Government

CTN :45660413

10 Jul, 2026 NA

Banka - Bihar

Tender For tenders have been invited for the hiring of services and materials—categorized into groups 'a', 'b', and 'c'—required for the successful organization and maintenance of law and order during the shravani mela-2026 along the kanwariya routes within the district. - non-waterproof pandal (including ceiling) , waterproof pandal (including ceiling) , waterproof side enclosure , rauti (small tent) , fancy fabric enclosure , shamiana (canopy) , fancy decorative side enclosure , jajim (floor spread) , plastic tarpaulin , mattress , fabric side enclosure , kanat (canvas wall/partition) , low wooden platform (chauki) , cot/bed , folding cot (camp cot) , bolster (with cover) , chair (vip) , chair (fiber) , table (with cloth) 6' x 3' , dari (floor mat) 12' x 10' , bamboo barricading , generator 5 kva (including fuel and operator) , generator 5 kva (excluding fuel; with operator) , generator 20 kva (including fuel and operator) , generator 20 kva (excluding fuel; with operator) , generator 10 kva (including fuel and operator) , generator 10 kva (excluding fuel; with operator) , halogen light (500 watt) , wiring cable , vapour light , cfl bulb (20 watt) , bamboo pole for cfl (minimum height 10 feet) , bamboo pole for wireless setup , mic set (including mic, battery, sound box, four horn speakers, and operator) , charging board/point , metal halide light

CTN :45666967

04 Jul, 2026 NA

Krishnagiri - Tamil Nadu

Tender For purchase of civil lab equipments - equipments for lab, direct shear machine:standard compliance:the equipment shall conform to bureau of indian standards is 2720 (part 13) and equivalent astm international astm d3080.technical specifications:shear box size:60 mm 60 mm 25 mm specimen size (complete with grid plates, porous stones, and specimen cutter).normal load capacity:minimum 5 kn with loading yoke and calibrated loading hanger set.shear load capacity:minimum 2.5 kn or 5 kn with calibrated proving ring (with calibration certificate).rate of strain (shear displacement):variable speed drive with controlled displacement ranging from 0.01 mm/min to 1.25 mm/min (motorised model preferred for uniform rate control).displacement measurement:horizontal displacement dial gauge: 0.01 mm least countvertical displacement dial gauge: 0.002 mm or 0.01 mm least countloading frame:rigid, heavy-duty loading frame with corrosion-resistant finish.drive system:motorised with single phase 220 230 v, 50 hz power supply.accessories (to be supplied complete):shear box assemblyproving ring with calibration charttwo dial gaugesloading weights and hangerporous stones (2 nos.)specimen cuttertool kit, auger boring (or) any boring -soil sampling apparatus: engine type: 4-stroke, air-cooled, single-cylinder petrol engine displacement: 196 cc power output: minimum 6.5 7 hp ( 3.5 kw) maximum engine speed: ~3600 4000 rpm starting system: recoil (manual) start fuel type: pure petrol fuel tank capacity: minimum 1.5 1.6 l supported auger bit sizes: 4 , 6 , 8 , 10 , 12 , 14 (100 350 mm) bit material: heavy-duty mild steel with powder coating typical drilling depth: minimum 3.5 4 ft per bit (800 mm 1.2 m) bit coupling: quick-coupling system for easy bit replacements frame: robust tubular steel frame with ergonomic handles and vibration absorbers weight: minimum 20 22 kg (without auger bit), flow table test apparatus: dimensions and specifications as per is 9103, table top made from flat metal plate ,minimum thickness 1.5 mm, table top size:700 mm*700 mm ,with flatness tolerance of 1.5 mm.table top marked with: scribed cross at centre,lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top:16+_ 1kg table top base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface. minimizing bounce stop watch-digital -2 nos scale 1 mtr-2 nos mounting wooden platform 300 mm height amc for 3 years inclusive., drying oven:temperature range: ambient (room) up to 250 temperature control: digital pid controller / thermostat for accurate heating. prestogroupaccuracy: typically 1 2 c. chamber material: stainless steel inner chamber for durability and easy cleaning. air circulation: forced convection fan for uniform temperature. shelves: usually 2 3 adjustable shelves. power supply: single phase 220 230 v ac, 50 hz.

Central Government/Public Sector

CTN :45664839

03 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of set of welded partition frame for bangladesh ac chair car coaches.note: make/manufacturer of raw material shall be m/s jsl or m/s sail., as per drawing: mp25paraccbang version 2, packing instruction: `packing condition of set of partition frame and procedure to achieve best possible protection during transportation: 1. surface preparation: - thoroughly clean the components to remove any dirt, grease or contaminants - apply a protective film, such as pvc or laser film or bubble sheet, to shield surfaces from scratches and environmental factor. 2. packing materials: - wooden crates: construct sturdy wooden cage tailored to the component's dimensions. - steel strapping: utilize rust-proof steel straps to securely bundle components, preventing movement during transit. 3. moisture barrier: - incorporate moisture-proof materials, such as plasticfilm or water proof ability paper, to guard against corrosion. 4. componentarrangement: - place components on wooden pallets or within custom-designed supports to distribute weight evenly and prevent deformation. - ensure that no part of the component extends beyond the protective packaging to avoid exposure to potential damage. 5. securing the components: - use steel straps or ropes to fimly anchor the components within the wooden crate, minimizing internal movement. - for added stability, employ bracing or cushioning materials, such as foam pads or corrugated inserts, to fill voids and absorb shocks. - hardware items to be suitably packed separately inside the crate. 6. labeling and documentation: - clearly label each package with essential information, including pl no. specifications, details of each set with qty. and also keep one copy inside ot the crate, weight, handling instructions and firm's & destination details. 7. loading onto trailer/lorry/truck/transport: - strategically position the packaged components within the truck/suitable to maintain balance and prevent shifting during transit. - secure the packages to the container's structure using lashing ties or additional bracing as needed. 8. final inspection and sealing: - conduct a thorough inspection to verify that all components are securely packed and that packaging materials are intact. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45652396

02 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of set of welded partition frame for non ac bangladesh coach. note: make/manufacturer of raw material shall be m/s jsl or m/s sail., as per drawing: mp25parnabang version 3, packing instruction: `packing condition of set of partition frame and procedure to achieve best possible protection during transportation: 1. surface preparation: - thoroughly clean the components to remove any dirt, grease or contaminants - apply a protective film, such as pvc or laser film or bubble sheet, to shield surfaces from scratches and environmental factor. 2. packing materials: - wooden crates: construct sturdy wooden cage tailored to the component's dimensions. - steel strapping: utilize rust-proof steel straps to securely bundle components, preventing movement during transit. 3. moisture barrier: - incorporate moisture-proof materials, such as plastic film or water proof ability paper, to guard against corrosion. 4. component arrangement: - place components on wooden pallets or within custom-designed supports to distribute weight evenly and prevent deformation. - ensure that no part of the component extends beyond the protective packaging to avoid exposure to potential damage. 5. securingthe components: - use steel straps or ropes to fimly anchor the components within thewooden crate, minimizing internal movement. - for added stability, employ bracing or cushioning materials, such as foam pads or corrugated inserts, to fill voids and absorbshocks. - hardware items to be suitably packed separately inside the crate. 6. labeling and documentation: - clearly label each package with essential information, including pl no. specifications, details of each set with qty. and also keep one copy inside ot the crate, weight, handling instructions and firm's & destination details. 7. loading onto trailer/lorry/truck/transport: - strategically position the packaged components within the truck/suitable to maintain balance and prevent shifting during transit. - secure the packages to the container's structure using lashing ties or additional bracing as needed. 8. final inspection and sealing: - conduct a thorough inspection to verify thatall components are securely packed and that packaging materials are intact. [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45668874

25 Jun, 2026 NA

Mumbai - Maharashtra

Tender For auction sale of wooden pallets

CTN :45622008

06 Jul, 2026 25.00 Lacs

Jodhpur - Rajasthan

Tender For test equipment rental-tent (30' x 45') erected with bamboo, ropes, and pegs; pipe pandal tent (15' x 30') erected with pipes; side wall/curtain (15' long, with bamboo and ropes); floor mat (15' x 30'); bamboo poles (10' for barricading); bamboo poles (15' for barricading); pipes (10' for barricading); bamboo poles with flags (10'); ceremonial gate; entrance gate; decorative valance/frill (per linear foot); plastic and iron chairs; tables with covers; *chundri* print curtains/ceiling drapes; water tank; bucket; lota (water vessel); gas light/lamp; quilt; straw mat/floor covering; pillow; wooden platform (6' x 3'); fan with stand; steel chair (sofa-style with cover); sofa set with cover; large water cooler; velvet mat (5' x 30'); dressing table with cover; table cover with frills; tea table with cover; mattress (3' x 6') with cover; cot/charpai; bed sheet (3' x 6'); waterproof tent (15' x 30') erected with bamboo, ropes, and pegs; doormat; platform/stage sections (4' height, 3' x 6'); colorful decorative flower pots (3' to 4' height); artificial plastic flower garlands; fresh green grass/alfalfa for decoration; flower garlands; rose flowers.

Wooden Platform Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others