Latest wooden poles Tenders | Government wooden poles Tenders

CTN :45399525

08 Jun, 2026 19.80 Lacs

Pulwama - Jammu And Kashmir

Tender For providing of lt poles for smart metering including replacement of old wooden poles (metering) at sub-division pulwama, newa and rajpora under ut capex 2026-27 - providing of lt poles for smart metering including replacement of old wooden poles (metering) at sub-division pulwama, newa and rajpora under ut capex 2026-27.

State Government

CTN :45367498

19 Jun, 2026 NA

Delhi - Delhi

Tender For providing of custom bid for services - addition & alteration construction of bio-chemistry lab at second floor. - dismantaling and disposal work; (a) first floor roof existing fibre sheet removal and disposal (16x5)feet , (b)second floor(bio chemistry) existing brick wall 9" th. dismantling and disposal , ( c) existing window removal (6x4'-6") , (d) existing floor dismantling and disposal , " 6.4.1 brick work with common burnt clay f.p.s (non modular) bricks of class designetion 7.5 in superstructure above plint level in all shapes and sizes in cement mortar1:6(1cement 6 coarse sand) " , plaster inside 12mm with 1: 6 ratio with fine sand , external plaster 15mm 1 :4 ratio 18mm cement plaster in two coats under layer 12 mm thick cement plaster1:5 ( 1cement :5 coarse sand ) and a top layer 6mm thick plaster , providing and laying reinforcement work , providing and laying rienforce cement concrete in retaining walls including attatched pilasters, colmns,piers,abutments pillars,posts,struts,buttresses,string,or lacing courses,parapets,coping,bed blocks,anchor blocks window sills ,fillllets,sunken floor etc.up to floor five level ,excluding the cost of centering ,shuttering ,reinforcement and finishing (5.2.2) , floor and roof protection work ;(4.20a.2.2) concrete of m15grade with minimum cement content 240kg/cum , 11.49.2 floor tiles; providing and laying full body vitrifiedtile in floor of minimum thickness 15mm with water absorption less than 0.06% and confirming to is:15622,of approved make, brand and manufacturer.laid on 20 mm thick cement mortar 1:4 . including grouting the joints with white cement /matching grout size600x600 , skirting , structural steel work welded in built up sections /framed work including cutting ,hoisting ,fixing in position and applying a priming coat of approved steel primer using structural steel .(250x125) , "red stone for slab providing sand stone slab for roofing and laying them in cement mortar1:4 ( 1 cement : 4 coarse sand ) over wooden karris or rcc battens or structural steel section (karries or battens or or structural steel. " , providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: , counter slab stone work , 8.2.2 . providing and fixing 18mm thick gang saw cut mirror polished, premoulded and prepolished,machine cut for kitchen platforms ,vanity counters,window sills ,facias and similar locations of required size approved shade ,colour and texture laid over20 mmthick base cement mortar, joint treated with white cement mixed matching pigment,including rubbing curing ,moulding and polishing of edges excluding hosting and transportation , counterslab stone skirting , providing edge moulding to 18 mm thick marble/granite stone counter,vanities etc. , p\ fteak wood frame ,providing wood work in frames of doors windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasterners of requireddia and length( hold fastlugs or dash fastenershall be paid for separetely. , p\f flush door , providing and fixing is markedflush door shutters confirming to is ;22029 part 1) non decorative type core of construction with frame of first class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters (9.21.1) 35 mm thick including isi markedsteel but hinges with necessary screws , fixing of aluminium window with all necessary at site available at site , providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. , distempering with 1st quality acrylic distemper (ready mixed) having voc content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : , finishing walls with acrylic smooth exterior

CTN :45173402

04 Jun, 2026 NA

Udhampur - Jammu And Kashmir

Tender For corrigendum : survey, supply, transportation, carriage, erection, testing and commissioning for bifurcation/improvement and stabilization of ht of garhi samnabanj, kulwanta, satyalta, old and new, katwalt, replacement of rotten wooden poles under sd ramnagar

State Government

CTN :45343214

04 Jun, 2026 56.93 Lacs

Daman - Gujarat

Tender For providing and supplying of auxiliary items for old collectorate, daman - civil works others, providing and fixing 25mm thick commercial grade plywood on ms structural framework, including fabrication and erection of necessary m.s. square/rectangular pipe structure, cutting, welding, grinding, primer painting, fixing of plywood with suitable screws, nuts, bolts and approved hardware fittings, complete with all labour, materials, tools & tackles, transportation, loading/unloading, scaffolding and finishing work as directed by the engineer-in-charge., providing and fixing 15mm thick engineered solid wood flooring of approved make such as mikasa or equivalent, comprising top uv coated wooden wear layer bonded on plywood base, in approved shade and pattern, including surface preparation, underlay wherever required, adhesive fixing, cutting, edge finishing, skirting/joint treatment, complete installation with all necessary accessories, labour, tools & tackles, transportation, loading/unloading and finishing work as directed by the engineer-in-charge., providing and fixing 15mm thick engineered solid wood flooring skirting and t-patti work in approved shade and finish, including 75mm / 50mm size matching wooden skirting, plywood base/patti as required, fixing with suitable adhesive, nails and hardware accessories, cutting, edge finishing, polishing and complete installation with all labour, materials, tools & tackles, transportation, loading/unloading and finishing work, complete as directed by the engineer-in-charge., providing and fixing 3mm thick underlay foam sheet below wooden flooring, of approved quality and make, including surface cleaning and preparation, laying with proper alignment and jointing as per manufacturer specifications, complete with all labour, materials, tools & tackles, transportation, loading/unloading and necessary finishing work, as directed by the engineer-in-charge., labour charges for laying and fixing wooden flooring, including application of approved adhesive/glue and liquid compound, proper cutting, fitting, alignment and finishing of flooring boards/tiles, complete with necessary labour, tools & tackles, handling, cleaning and all incidental works required for proper installation, as directed by the engineer-in-charge., providing and fixing gypsum board partition/wall panelling above bathroom wall area, using approved quality moisture resistant gypsum board fixed on g.i. framework with necessary channels, studs, screws and jointing compound, including cutting, finishing, taping of joints, surface preparation and complete installation with all labour, materials, tools & tackles, scaffolding, transportation, loading/unloading and finishing work, as directed by the engineer-in-charge., providing and fixing room carpet of approved quality, design, colour and make, suitable for indoor flooring application, including necessary underlay wherever required, cutting to required size, transportation, loading/unloading and all incidental charges, complete as directed by the engineer-in-charge., providing, testing & commissioning 40 litre capacity solid door thermo-electric mini bar/refrigerator of approved make and model, suitable for hotel/office/residential use, complete with adjustable shelves, temperature control system and all standard accessories, including transportation, loading/unloading, placement at site and testing & commissioning, complete as directed by the engineer-in-charge., providing and fixing hotel safety locker/safe of size 200 x 420 x 370 mm, black colour, with electronic digital locking system, suitable for hotel/office/residential use, complete with mounting accessories and standard fittings (battery not included), including transportation, loading/unloading, installation and testing, complete as directed by the engineer-in-charge., providing testing & commissioning double layer electric kettle, black colour, of approved make and capacity, with stainles

CTN :45149682

27 May, 2026 NA

Udhampur - Jammu And Kashmir

Tender For survey, supply, transportation, carriage, erection, testing and commissioning for bifurcation/ improvement and stabilization of ht/lt network replacement of rotten wooden poles under the jurisdiction of electric sub division-chenani jpdcl udhampur.

CTN :45219520

04 Jun, 2026 19.80 Lacs

Pulwama - Jammu And Kashmir

Tender For providing of lt poles for smart metering including replacement of old wooden poles (metering) at sub-division pulwama, newa and rajpora under ut capex 2026-27

Central Government/Public Sector

CTN :45194592

25 May, 2026 NA

Delhi - Delhi

Tender For supply and installation of extendable modular conference table and related misc. items as per annexure-1 attached. [ warranty period: 30 months after the date of delivery ] ] - extendable modular table portions made up of 25/18mm plpg table tup 25mm duly post formed and rest of the body 18mm duly edge bended with 0.8mm thick pvc taping. over all size 1400(l) x 6000(d) x 750 (h)mm , table top glass for conference table portions size 1400 (l) x 600(d) mm, 10mm clear glass with beveled edges fixed with steel studs. , grid & tile based pvc laminated false ceiling fixed with ms powder coated grid with all accessories like suspension rods, butterfly clips and fastners complete in all respect. area 9 mtr x 14 mtr=126 squire meter. , wooden wall paneling on aluminum frame with 12mm thick pupb of desired shade and design. area 14mtr (l) x 3mtr (h) x 2 no. wall = 84 sqm & 09mtr (l) x 3mtr (h) x 2 no. wall = 54 sqm=138sqm , wooden flooring 08mm thick of make action tesa of ac-3 grade with all accessories like door profile & skirting etc. complete in all respect. area 14mtr x 9mtr

CTN :45178380

04 Jun, 2026 26.62 Lacs

Agra - Uttar Pradesh

Tender For supply of dismantling of old worn out acoustic treated false ceiling facing material, shifting and disposal of dismantled debris material from outside of the office premises at akashvani agra, uttar pradesh , providing, fabrication and fixing of false ceiling facing material in transmission booth studio, control room, talk studio and other technical area at akashvani agra, uttar pradesh , dismantling of old worn out wooden acoustic treated wall panelling facing material, shifting and disposal of dismantled debris material from outside of the office premises at akashvani agra, up , providing, fabrication, fixing of a and b type wooden wall paneling facing material including wainscot in transmission booth, control room, talk studio and other technical area at akashvani agra , providing, fabrication and fixing of cedar or teak wooden skirting 125mm x 13mm in transmission booth studio, control room, talk studio and other technical area at akashvani agra, up , anti termite treatment to ensure uniform distribution and proper penetration of treatment of treating solution as required in transmission booth, control room, talk studio and other technical area , providing, applying 2 coats of wall primer on gypsum false ceiling and walls,after touching on corners,joints and screw heads at transmission booth, control room, talk studio and other technical area , wooden surface to be cleaned and wooden putty to be applied and after rubbing with appropriate sand paper to smooth the surface two or more coat of wooden polish to be applied in wainscot and doors , providing and applying of wall finish, putty and pop on walls to make smooth finish for premium emulsion paint at transmission booth studio, control room, talk studio and other technical area , providing, applying of 125mmx125mmx12mm pop gypsum cornice as per approved profile at all around false ceiling in transmission booth studio, control room, talk studio and technical area , fixing of 2ftx2ft recessed led light fixtures, as per respective drawings with supply of 1.5 sq.mm single core copper cable with laying and wiring of recessed mounted led light and make ready dismantling of old worn out acoustic treated false ceiling facing material of transmission booth studio, control room, talk studio and other technical area at akashvani agra (up), shifting & disposal of dismantled debris material from the outside of the office premises., providing, fabrication and fixing of false ceiling s facing material in transmission booth studio, control room, talk studio and other technical area at akashvani agra (up) as per drawing, dismantling of old worn out wooden acoustic treated wall panelling facing material in transmission booth studio, control room, talk studio and other technical area at akashvani agra (up), shifting & disposal of dismantled debris material from the outside of the office premises., providing, fabrication and fixing of a & b type wooden walls paneling facing material including wainscot in transmission booth studio, control room, talk studio and other technical area at akashvani agra (up)., providing, fabrication & fixing of cedar/teak wooden skirting (125mm x 13mm) in transmission booth studio, control room, talk studio and other technical area at akashvani agra (up)., anti-termite treatment to ensure uniform distribution and proper penetration of treatment of treating solution at columns pits, wall trenches, top surface, and conduits, expansion joints junction walls & the floor etc //bid details 2 / 22

Central Government/Public Sector

CTN :45139893

29 May, 2026 NA

Kapurthala - Punjab

Tender For supply of skirting for lhb coaches, as per drawing: 2 10113.0.21.220.139 alt a, packing instruction: jute bag with wooden cage [ warranty period: 30 months after the date of delivery ]