Latest wooden ruler Tenders | Government wooden ruler Tenders

Central Government/Public Sector

CTN :45728580

28 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of set of frp panels for flat ceiling for standees and lavatory area for memu/tc 3phase medha coaches and colour shade ral-9001 as per lno. md22151 dt 18/6/2019., as per drawing: et44153 alt c item 2 to 4 and 19. as per design office l.no. md21896 dated 03/10/2022 mdts-133 rev. 05 is applicable in lieu of icf/md/spec-167a mentioned in the drawings. packing instruction no.pi112 ver 3.0 [ warranty period: 84 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45736870

21 Jul, 2026 NA

Bhusawal - Maharashtra

Tender For supply of paint enamel synthetic exterior finishing post office red to isc no. 538 of is 5 : 2007 (reaffirmed-2022) for railway coaches conforming to is 8662 : 2024 and rdso amendment no 1 (revision 0) for pigment content as an additional requirement to is 8662 : 2024 w.e.f. 01.08.2016 with additional requirement of icf/md/spec/045 issue status 02 rev. 03 dt 14.06.2007 and rdso`s amendment no. 1a (rev.1.0, effective from june-2020) as an additional requirement. packing in 20 ltrs. new non-returnable m.s. drums to is 2552 : 1989 (reaffirmed-2018), with amendment no. 1 of apr. 1999, gr. b2. [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45725218

20 Jul, 2026 NA

Ratlam - Madhya Pradesh

Tender For tender for supply of book self standard size, make-godrej or similar., steel locker with multi compartment size-h 1800mm x w 1200mm x d 450mm. make-godrej or similar., sliding door file storage unit m/s godrej make or equivalent, steel almirah big size (78 x 36 x 19)inch approx make-godrej or similar., tools storage cabinet size - depth in mm (460 mm) width in mm (915 mm) height in mm (1800 mm) & coverd with all three sides, steel plain almirah with 4 adjustable slaves size:1980mm height, 915 mm widthand 485 mm depth., make: godrej storewel plain large or similar of reputed brand., steel open rack-size (height=6-8 feet approx, width=standard, depth=standard). or similiar, ?steel plain almirah with 4adjustable slaves size:1980mm height, 915 mm widthand 485 mm depth. make:godrej storewel plain large orsimilar of reputed brand., supply of steel slotted angle rack of size 72" x 36 x14" for the use of, store item, office visitor chair non-revolving and non-tilting chair with armrest. detailed specification as per gemc-511687792804101 dated 14/09/24, dice office systems revolving chair with center tilt mechanism, type of chair :hight back, seat material: pu foam, actual seat height from floor surface (mm): 485, seat hight audjustment (mm): 100, actual width of seat (mm): 525, width of backrest (mm): 500, armrest type and arm movement: fixed (detailed description/specification as per product # 1 of gem contract no. gemc-511687749216043 dt.22/08/2024), moulded chair with table (with heavy duty four legs with plasitc greeping table size-30, revolving chair overall width (?10 mm) 750 mm backrest height ?15 mm 600 mm backrest width ?10 mm 440 mm seat height ?10 mm 440 mm seat width ?10 mm 460 mm seat depth ?10 mm 480 mm (detailed description/specification as per product # 1 of gem contract no. gemc-511687798747171 dt.25/06/2024), office revolving chair godrej make model no.9u02r bravo or similar of reputed brand, supply office chair make godre ch-78 or reputed brand or similar, office revolving chair godrej make model no.9u02r bravo or similar of reputed brand, supply office chair makes godrej ch-78 or similar of reputed brand., revolving chair, standard computer tables size(1200mm l x 600mm d x 750mm h) approx with sliding keyboard tray with drawer. make-godrej or similar., modular office table of size 1500 mm lx 600 mm d x 750 mm ht with three drawer (2 + 1) make godrej or similar., center table dimension, top matarial: flate glass, frame matarial: other wood, leg material: other wood, dimension of top 965mmx 457mm, height of centre table: 510 mm (detailed description/specification as per product # 1 of gem contract no. gemc-511687771629606 dated 19/05/22), computer table size of computer cum printer table ?10 mm (lxbxh) 1200 mm x 750 mm x 750 mm (detailed description/specification as per product # 1 of gem contract no. gemc-511687798653140 dt.05/06/2024), office table size 1800 x900x760 (mm) storage both side. detailed specification as per gemc-511687753374503 dated 25/02/23, wooden centre table with glass table top-fix, stainless steel dining table with 6 chair standard size., supply of office table with laminated top with three drawers on left hand side and one locker on the right hand side. olive brown with duplicate keys. make: godrej model t-9 or reputed brand or similar., supply of office table with laminated top with three drawers on left hand side and one locker on the right hand side. olive brown with duplicate keys. make: godrej model t-9 or similar of reputed brand., decorative coir mats size 855 cm x 50 cm confirming to is:11420 part-3:1985: latest, a sample to be approved by c.a.

corporations/Associations/Others

CTN :45743119

04 Jul, 2026 16.53 Lacs

Multi City - Telangana

Tender For providing of national flag with 100-ft high mast flag pole in front of zonal office building, serilingampally zone, cmc (item-02)(2nd call)

corporations/Associations/Others

CTN :45702242

07 Jul, 2026 17.03 Lacs

Kota - Rajasthan

Tender For regular operation and maintenance of street lights (with material) at all industrial areas under riico ranpur kota(for 2 years) - regular operation and maintenance of high mast light in ranpur , kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register shall be maintained at riico/association office and complaint lodged must be attended by contractor within 24 hours. the person deputed by contractor shall attend the riico/association office daily and comply the instructions and attend complaints regularly. iii contractor will have to employ trained and qualified electricians for the work. iv corporation shall not be responsible for any kind of accident during execution of work. v contractor will be responsible for safety and security of fixtures and all concerned materials. vi contractor will be responsible for arrangement of all t&p required for the work vii cost of all labour and material like lamp / balllast wire etc. will be born by contractor. all material required for the work shall not be below the category-ii of concerned bsr item. contractor has to repair and maintenance of fixture with material in all cases like short circuit, phase to phase of jvvnl line etc. viii no extra payment will be made for fixing/removal of extra/existing fixture in the industrial area. ix contractor will be responsible for timely collection and deposition of electric bills of areas in each month. in case of delay in payment and jvvnl impose surcharge for delay payment the same will be recovered from the running bill fo the contractor. payment of electricity bill will be made by riico. x contractor will be responsible for rebate of timer provided by jvvnl. hence contractor will maintain the on/off system by timer properly. in case no rebate is provided by jvvnl due to failure of timer then rebate will be deducted from contractor payment. xi contractor will be responsible for any theft of electricity through poles and he will make necessary arrangements for this. in case of any theft is found suitable penalty will be imposed on the contractor. xii contractor will maintain cubical panel board and assessories fitted in it. in case of any fault repair/replace of material will be done by the contractor at his own cost. no extra payment will be made on behalf of material. xiii contractor has to keep ready total fixtures. in case of fault of fixture a penalty of rs.100/- per fixture per day will be imposed on the contractor., regular operation and maintenance of street light fixtures hpsv/ hpmv (70w/150w) in ranpur, kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register sh

CTN :45728589

17 Jul, 2026 NA

Liluah - West Bengal

Tender For supply of switch plate assembly complete with polycarbonate cover frame and powder coatedsteel plate with 02 nos. on-off switches and 02 nos. 3 pin socket 06 amp, 250v ac with 04 nos. 1.0 a glassfuse with fuse holders of m/s.ferraz shawmut /cooper bussman or equivalent with the approval from the office of cede/rcf, as per rcf spec edml 086, rev-8,table-1, item no.-3 of rcf drg. no. cc74247, alt-g. [warranty period: 30 months after the date of delivery ] ]

CTN :45739002

15 Jul, 2026 NA

Usmanabad - Maharashtra

Tender For supply of public seating chair (3 seater) additional , stool for lab and class-iv additional , double faced mobile unit for compactor (2150h x 2745w x 900d) additional , conference table (8214 x 2400 x 750 mm) additional , veneer finish wall paneling additional , mid back office chair with synchro additional , carpenter class skilled additional , calcium silicate false ceiling (15 mm thick) additional , calcium silicate false ceiling (15 mm thick) item no. 38.89 (3.00m) additional , ss 304 grade hand railing (40 mm) additional , acoustical wall panelling fabric wrapped (600x600/1200x25 mm) additional , back painted toughened glass (8 mm thick) additional

CTN :45700410

16 Jul, 2026 NA

Raisen - Madhya Pradesh

Tender For stationery item supply district raisen - stationary items, "trainig kit no 101 ball pen /gell pen (rs.10 mrp) 01 spiral note book (40 pages with office name printing) one clear bag plastic simple", "trainig kit no 201 ball pen /gell pen (rs.10 mrp) 01 spiral note book (40 pages with office name printing) one clear bag plastik medium quality", "trainig kit no 301 ball pen /gell pen (rs.20 mrp) 01 spiral note book (40 pages with office name printing) one clear bag high quality(jute/regzine)", alpin , artsheet a 4 size, attandance register 4 no, ball pen/gell pen 10 mrp, ball pen/gell pen 20 mrp, pen fine grip, basta cloth, box file jambo, brown tape 1 ", brown tape 1/2 ", brown tape 2 ", calculator, candil, cello tape 1 ", cello tape 1/2 ", celo tape 2 ", certificate multi colour art sheet with mateer printing, chapdi, claimp pad sanmica sheet, clear bag plastic simple, clear bag plastic medium quality, clear bag plastic high quality(jute/regzine), colour sheet, correcting fluid pen, cutter, despatch register 10 no, double side tape, duster black board, duster white board, envelop brown 11 x 5, envelop brown 9 x 4, envelop laminated 10 x 12, envelop laminated 8 x 10, envelop white, envelop white 11 x 5, envelop white 9 x 4, fevi stic 15 gm, fevicol 200 gm, file cover j-7-1-1, file less 324 n, flag paper, flip chart 25/50 page sheet, four fold passy pad, gum bottle (100 ml), gum bottle (300 ml), highlightner pen all colour, i card with dori, inward register 10 no, jamboodeep stock register 100 pages, jamboodeep stock register 150 pages, log book, marker pen all colour, markin cloth, ohp pen, paper cutter, paper vat, passy pad simple, ped ink 100 ml, pencil hb , peon book, permanent marker, photocopy paper a3 75 gsm (each pkt 500 sheet), photocopy paper a4 75 gsm (each pkt 500 sheet), punching machine (52 n), punching machine (480 n), register 2 no, register 4 no, register 6 no, register 8 no, ruber non dust, scale palstic 12", scale steel 12", sizeer medium plastic handle, sketch pen big per packet, sketch pen small per packet, slip pad 40 pages spiral, spiral note book 40 pages with office name printing, sooza plastik, scissor medium size, spring file, stamp pad big blue, stamp pad big red, stamp pad medium blue, stamp pad medium red, stapler 10 no, stapler 10 no pin, stapler 24 no, stapler 24 no pin, table bell, tag 6 inch, tape dispencer, thumb pin supirior, white board marker all colour, white paper sheet full scape, water color marker (alfachisel), white sheet

CTN :45514745

01 Jul, 2026 NA

Vidisha - Madhya Pradesh

Tender For corrigendum : cs/rmo/2026/2089-90/steel item - linen trolley with two bucket (50 ltr. each) 8” wheel 4,aproximate weight 10 kg (iron powder coated) oxygen cylinder trolley d type/ 60 cft (iron powder coated) luggage trolley capacity 300-350 kg 4 wheel 8” aproximate weight 20 kg (iron powder coated) double locker narcotic drug cabinet with 2 shelf aproximate weight 20 kg (iron powder coated) 36 x18x15 inch wall mounted iron rack 6 shelf size15x36x72inch slotted angle (iron powder coated) cabinet 6/12 locker size15x36x72inch (iron powder coated) office chair office table computer table revolving chair ware house rack 4 layer(shelves) crc sheet size 200x60x200cm capacity 350kg each layer 3 bucket mopping trolly bmw trolley s.s. with three bucket (30 ltr. each bucket) almirah 5 shelf size15x36x72inch with heavy duty (iron powder coated) hydrolic hand pallet trolley, 3 ton capacity 1150x550 mm fork size spot light with stand for examination procedure ( high intensity led, cri >90 power supply 220-240v ac ,50 hz , low heat genration 01 year warrenty lux meter

Central Government/Public Sector

CTN :45727660

07 Jul, 2026 NA

Harnaut - Bihar

Tender For supply of switch plate assembly complete with polycarbonate cover frame and powder coated steel plate with 04 nos. on/off switches and 01 no. 3 pin socket 06 amp, 250v ac with 02 nos. 1.0 a glass fuses with fuse holders of m/s. ferraz shawmut/cooper bussman or equivalent with the approval from the office of cede/rcf, as per rcf spec edml 086, rev-8 or latest, rcf drg. no. 74247, alt-g or latest, item-2. [ warranty period: 30 months after the date of delivery ] ]

Wooden Ruler Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector