Latest wooden saw Tenders | Government wooden saw Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

CTN :45441089

18 Jun, 2026 NA

Bazpur - Uttarakhand

Tender For supply of tools and tackels in sugar mill - roller grooving tool size- x 6 x 40 isi/iso standard, size- x 6 x 45 isi/iso standard, size- x 6 x 50 isi/iso standard, size- 1 x 12 x 40 isi/iso standard, size- 1 x 12 x 45 isi/iso standard, size- 1 x 12 x 50 isi/iso standard, size- 1, x 12 x 40 isi/iso standard, size- 1, x 12 x 45 isi/iso standard, size- 1, x 12 x 50 isi/iso standard, carbide cutting tools. size: x 4 right hand. isi/iso standard, size: x 4 left hand. isi/iso standard, size- 1 x 6 right hand. isi/iso standard, size- 1 x 6 left hand. isi/iso standard, size- x 6 right hand isi/iso standard, size- x 6 left hand isi/iso standard, carbide tips all size isi/iso standard, h.s.s. tool bit all size isi/iso standard, tapper shank dril all size . isi/iso standard, straight shank dril all size. isi/iso standard, files all size. isi/iso standard, tape set of (3 piece) bsw all size. isi/iso standard, tap set of (3 piece) mm. all size. isi/iso standard, die nut inch/mm all size. isi/iso standard, d. spanner set all size. isi/iso standard, ring spanner set all size. isi/iso standard, box spanner set all size. isi/iso standard, pipe rinch all size. isi/iso standard, measuring tape 3 meter long . isi/iso standard, do - 5 meter long. isi/iso standard, do - 15 meter long. isi/iso standard, tin cutter 10 . isi/iso standard, do - 16 isi/iso standard, revolving centre 3 m.t. isi/iso standard, revolving centre 4 m.t. isi/iso standard, revolving centre 5 m.t. isi/iso standard, oil can capacity 200 m.l. isi/iso standard, screw pitch gauge. isi/iso standard, wooden saw(circular saw)1/8 x 18 isi/iso standard, drill socket (i) size 0 1 isi/iso standard, (ii) size- 1 2 isi/iso standard, (iii) size- 2 3 isi/iso standard, (iv) size- 3 4 isi/iso standard, (v) size- 4 5 isi/iso standard, h.s.s. black tool bar square high grade all size, steel rule 12 . isi/iso standard, steel rule 24 . isi/iso standard, screw driver set all types and sizes. isi/iso standard, pliar all type and sizes. isi/iso standard, drill chuck straight size: 1/8 to isi/iso standard, carbide tips only (all size) isi/iso standard, high carbon steel tool 10% cobalt size: to 1 isi/iso standard, knurling tool multi purpose. isi/iso standard, carbide tip tool (with handle) k-20 for (roller grooving) (i) size- 1, x 12 x 40 isi/iso standard, (ii) size- 1, x 12 x 45 isi/iso standard, (iii) size- 1, x 12 x 50 isi/iso standard

CTN :45105964

21 May, 2026 NA

Bazpur - Uttarakhand

Tender For supply of tools and tackles materials in sugar mill - roller grooving tool size- x 6 x 40 isi/iso standard, size- x 6 x 45 isi/iso standard, size- x 6 x 50 isi/iso standard, size- 1 x 12 x 40 isi/iso standard, size- 1 x 12 x 45 isi/iso standard, size- 1 x 12 x 50 isi/iso standard, size- 1, x 12 x 40 isi/iso standard, size- 1, x 12 x 45 isi/iso standard, size- 1, x 12 x 50 isi/iso standard, carbide cutting tools. size: x 4 right hand. isi/iso standard, size: x 4 left hand. isi/iso standard, size- 1 x 6 right hand. isi/iso standard, size- 1 x 6 left hand. isi/iso standard, size- x 6 right hand isi/iso standard, size- x 6 left hand isi/iso standard, carbide tips all size isi/iso standard, h.s.s. tool bit all size isi/iso standard, tapper shank dril all size . isi/iso standard, straight shank dril all size. isi/iso standard, files all size. isi/iso standard, tape set of (3 piece) bsw all size. isi/iso standard, tap set of (3 piece) mm. all size. isi/iso standard, die nut inch/mm all size. isi/iso standard, d. spanner set all size. isi/iso standard, ring spanner set all size. isi/iso standard, box spanner set all size. isi/iso standard, pipe rinch all size. isi/iso standard, measuring tape 3 meter long . isi/iso standard, do - 5 meter long. isi/iso standard, do - 15 meter long. isi/iso standard, tin cutter 10 . isi/iso standard, do - 16 isi/iso standard, revolving centre 3 m.t. isi/iso standard, revolving centre 4 m.t. isi/iso standard, revolving centre 5 m.t. isi/iso standard, oil can capacity 200 m.l. isi/iso standard, screw pitch gauge. isi/iso standard, wooden saw(circular saw)1/8 x 18 isi/iso standard, drill socket (i) size 0 1 isi/iso standard, (ii) size- 1 2 isi/iso standard, (iii) size- 2 3 isi/iso standard, (iv) size- 3 4 isi/iso standard, (v) size- 4 5 isi/iso standard, h.s.s. black tool bar square high grade all size, steel rule 12 . isi/iso standard, steel rule 24 . isi/iso standard, screw driver set all types and sizes. isi/iso standard, pliar all type and sizes. isi/iso standard, drill chuck straight size: 1/8 to isi/iso standard, carbide tips only (all size) isi/iso standard, high carbon steel tool 10% cobalt size: to 1 isi/iso standard, knurling tool multi purpose. isi/iso standard, carbide tip tool (with handle) k-20 for (roller grooving) (i) size- 1, x 12 x 40 isi/iso standard, (ii) size- 1, x 12 x 45 isi/iso standard, (iii) size- 1, x 12 x 50 isi/iso standard

CTN :44956321

12 May, 2026 NA

Tiruvallur - Tamil Nadu

Tender For supply of wooden saw dust dry (free from all other particles)

Central Government/Public Sector

CTN :44934617

28 Apr, 2026 NA

Vellore - Tamil Nadu

Tender For supply of wooden sawdust in hdpe laminated bags as per annexure i

Central Government/Public Sector

CTN :44901106

24 Apr, 2026 NA

Ratlam - Madhya Pradesh

Tender For corrigendum : supply of wooden saw dust rough dry packed in 50 kgs per gunny bags. [ warranty period: 30 months after the date of delivery ]

Wooden Saw Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector