Latest wooden staircase Tenders | Government wooden staircase Tenders

Central Government / Public Sector

CTN :45066217

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot ferrous scrap - casnub bogies of side frames bolsters : actual lot 03122605 0430 pl no. 98117117 (15) (hsn code 72044900-gst 18%-on fcm basis) scrap of cond. & unserviceable released casnub bogies of side frames bolsters with or without attachments of spring planks brake beams push rods equalising levers springs adopters wedges, brake blocks and rubber pads.(gas cutting only two cuts is permitted for side frames and bolsters and bogies 6 cuts to loadable size for lorry). location road no.2 (image attached) (note: 1. if any ss/ corten steel & non-ferrous items found during cutting / loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )

Central Government / Public Sector

CTN :45066220

11 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot ferrous scrap - spring planks : actual lot no. 03122605 0415. pl no. 98050047 (15) (hsn code 72044900-gst 18%-on fcm basis) cs scrap of cond. & unserviceable spring planks, bottom plates of sorts and sizes full or cut with or without attachments. location road no.2 (concrete bin) (image attached). (note: 1. if any ss/ corten steel & non-ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )

Central Government/Public Sector

CTN :45066700

28 May, 2026 NA

Kapurthala - Punjab

Tender For supply of harness for hog compliant lhb eog high capacity parcel van coaches., as per drawing: edts406,rev-nil,am-2,corr-1&2, packing instruction: cable harness: complete one coach set cable harness to be protected with biodegradable transparent polythene sheet and packed in a wooden box. soft eco-friendly packing material hay,straw, etc be provided inside the wooden box to protect any damage to cable insulation while packing/unpacking.bottom frame to be made of wooden planks 20mm thick & should have supportof atleast 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. rigid pvc conduit supplied loose along with harness should be packed asper instructions .the material used for product packaging shall be eco-friendly.a list should be pasted on each packing showing order no ,pl no, description of the item, drg.no/spec.no, qty , firm's name &address and date of despatch etc. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45066759

29 May, 2026 NA

Kapurthala - Punjab

Tender For supply of feeder junction box for lhb coach with bio toilet., as per drawing: edts328.rev-c,am-7,cor. 4 & cor. 5 , type-2., packing instruction: alternator,rru, erru &accessories, transformer,bulk inverters , battery, charger, self priming monoblock pump, inverter, change over control box etc: suitably covered with biodegradable transparent polythene and packed in wooden cage: bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips of 20x100mm size. gap between each strip should not be more then 100mm. the material used for product packaging shall be eco-friendly.a list should be pasted on each wooden cage showing order no, pl no,description of the item, drg. no/ spec. no ,qty, firm's name &address and date of despatch etc. note- 1) firms have option to provide qr code. for linkage of po, the cardboard box shall carry a qr code having details as listed below: a) name of the manufacturer b) purchaseorder number c) purchaseorder date d) uniqueserial number (or lot number for bulk items) of the manufacturer or e) dateof manufacture f) deliverychallan no. g) deliverychallan date 2.the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. [ warranty period: 30 months after the date of delivery ]

CTN :45063789

12 May, 2026 NA

Chandigarh - Chandigarh

Tender For supply of cgi sheet 10 ft x 3 point 5 ft x 0 pt 71 mm , pgi sheet 8 ft x 4 ft x 0 pt 50 mm , plywood size 8ft x 4 ft x 19 mm , plywood size 8 ft x4 ft x 06 mm , plywood size 8ft x 4 ft x 10 mm , plywood size 8ft x 4ft x 12 mm , scantling size 10 ft x 2inch x 2inch , scantling size 10 ft x 3inch x 2inch , scantling size 10 ft x 4 inch x 2 inch , planks size 10 ft x 10 inch x 1 point 25 inch , pvc pipe size 4 inch oblique 110 mm dia 06 mtr long , plain bend 4 inch dia , pvc bend 45 degree 4 inch dia , pvc collar 4 inch dia , clamp 4 inch dia , silicon tube 280 ml , downspout 3 inch x 6 inch x 4inch dia , pvc solvent 500 ml , nut and bolt with washer 0 pt 5 inch , screw 1pt 5 inch packet of 100 pcs , screw 1 inch packet of 100 , plastic gitti 1pt 5 inch pack of 100 pcs , ms nails 2 inch comma 3 inch comma 4 inch of 5 kg each , beading 10 ft x1pt 5 inch x 12 inch , self driving screw 2 pt 5 inch , sliding bolt size 12 inch with nut and bolt , sliding bolt size 8 inch with nut and bolt , sliding bolt size 6 inch with nut and bolt , tower bolt 6 inch , tower bolt 4 inch , handle 6 inch , handle 4 inch , ms hinges 3 inch , ms hinges 4 inch , cpvc tank nipple 3 by 4 inch dia , wc european type with cistern and all accessories , wash basin with fastener and all accessories , pvc connection pipe 18 inch length 1 by 2 inch dia , cpvc plain jali 5 inch , cpvc hole jali 5 inch , cpvc bib cock 15 mm , cpvc angle cock 15 mm , curtain rod 5 ft long , window glass size 6 ft x 4inch x 5 mm , daimond glass cutter 3 dash 12 mm , pvc pipe 10 ft x 4 inch tybe b , paint enamel po red pack 20 ltr pack , paint enamel bus green pack of 20 ltr , apex emulsion exterior paint , paint enamel white 04 ltr pack , violet stainer of 200 ml pack , paint black 04 ltr pack , wall putty 20 kgs pack , plaster of paris pop pack of 10 kgs , teracotta red pack of 04 ltr , metal oxide pack of 10 ltr , paint enamel silver 01 ltr pack , touch wood varnish 05 ltr pack , turkey amber polish pack of 400 gm , raw senna pack of 400 ml , lal mitti pack of 400 gm , regmar cloth 120 nos , regmar cloth 100 nos , regmar 80 nos , regmar paper 220 nos , regmar 60 nos , walnut stainer pack of 100 ml , black stainer pack of 50 ml , blue stainer pack of 50 ml , red stainer pack 50 ml , wood primer pack of 04 ltr , oil based distemper 10 ltr pack , yellow oxide stainer pack of 100 ml , fast yellow stainer pack of 50 ml , chowk mitti pack of 05 kgs , fevicol ddl pack of 1 kgs , black mitti pack of 01 kgs , paint enamel golden brown pack of 05 kgs , painting brush 2 inch , painting brush 3 inch , painting brush 4 inch , tarpin oil pack of 20 ltr , paint enamel oxford blue pack of 04 ltr , paint enamel choclate brown 04 ltr pack , paint enamel yellow 04 ltr pack , sprit pack of 05 ltr pack , thinner pack of 05 ltr , box section 40 mm x 30 mm x 4 mm qty 42 mtr , box section 50 mm x 30 mm x 3 mm length 5 mtr total qty 95 mtr , ms flat plate 25 mm x 3 mm total qty 150 mtr , polycarbonate fiber transparent sheet not less than 8mm thick , self drving screw 55mm , self drving screw 25mm , gusset plate 100 mm x 100 mm x 6 mm , aluminum door with glass partition size 1 pt 0 x 2 pt 1 mtr , hinges size 100 mm , aldrop set , light hanging 2 x 2 ft , led tube light 4 feet long 20w , led bulb 9 w 12 w , led concealed ceiling light 12 w square shape crompton , 1 pt 5 mm wire pvc single core copper roll of 100 mtr , 2 pt 5 mm wire pvc single core copper roll of 100 mtr , 05 amp switch module , 05 amp socket module , 15 amp switch module , 15 amp socket module , door bell ding dong and bird sound , angle holder , pvc tape roll pack of 12 pcs , plug top 5 amp , //bid details 2 / 85 plug top 15 amp , batten holder , pendant holder , flexible wire 01 sqmm roll of 100 mtr , mcb 16a , isolator dp 63a

CTN :45063819

12 May, 2026 NA

Chandigarh - Chandigarh

Tender For supply of cgi sheet 10 ft x 3 point 5 ft x 0 pt 71 mm , pgi sheet 8 ft x 4 ft x 0 pt 50 mm , plywood size 8ft x 4 ft x 19 mm , plywood size 8 ft x4 ft x 06 mm , plywood size 8ft x 4 ft x 10 mm , plywood size 8ft x 4ft x 12 mm , scantling size 10 ft x 2inch x 2inch , scantling size 10 ft x 3inch x 2inch , scantling size 10 ft x 4 inch x 2 inch , planks size 10 ft x 10 inch x 1 point 25 inch , pvc pipe size 4 inch oblique 110 mm dia 06 mtr long , plain bend 4 inch dia , pvc bend 45 degree 4 inch dia , pvc collar 4 inch dia , clamp 4 inch dia , silicon tube 280 ml , downspout 3 inch x 6 inch x 4 inch dia , pvc solvent 500 ml , nut and bolt with washer 0 pt 5 inch , screw 1pt 5 inch packet of 100 pcs , screw 1 inch packet of 100 , plastic gitti 1pt 5 inch pack of 100 pcs , ms nails 2 inch comma 3 inch comma 4 inch of 5 kg each , beading 10 ft x 1pt 5 inch x 12 inch , self driving screw 2 pt 5 inch , sliding bolt size 12 inch with nut and bolt , sliding bolt size 8 inch with nut and bolt , sliding bolt size 6 inch with nut and bolt , tower bolt 6 inch , tower bolt 4 inch , handle 6 inch , handle 4 inch , ms hinges 3 inch , ms hinges 4 inch , cpvc tank nipple 3 by 4 inch dia , wc european type with cistern and all accessories , wash basin with fastener and all accessories , pvc connection pipe 18 inch length 1 by 2 inch dia , cpvc plain jali 5 inch , cpvc hole jali 5 inch , cpvc bib cock 15 mm , cpvc angle cock 15 mm , curtain rod 5 ft long , window glass size 6 ft x 4inch x 5 mm , daimond glass cutter 3 dash 12 mm ) /bid number : gem/2026/b/7469371 * /dated: 02-05-2026 & & / bid document 1 / 38

Central Government/Public Sector

CTN :45063822

23 May, 2026 NA

East Singhbhum - Jharkhand

Tender For supply of wooden sleeper size 100 x 200 x 1000mm moc sal wood , wooden sleeper size 150 x 200 x 1000mm moc sal wood , sal planks length-9 feet, width-8 inch, thickness 1 inch , sal planks length-8 feet, width-8 inch, thickness 1.5 inch , sal planks length-10 feet, width-8 inch, thickness 2 inch , salwod cribset size 2 feet x 3 inch x 3 inch moc sal wood

State Government

CTN :45061258

18 May, 2026 9.96 Lacs

Raichur - Karnataka

Tender For procurement of matti wooden planks for bm-2 of rtps

CTN :44787189

04 May, 2026 NA

Chandigarh - Chandigarh

Tender For bid to ras supply of timber and plywood - planks size 12 ft x 10 inch x 1 inch , scantling size 12 ft x 2 inch x 3 inch , scantling size 12 ft x 4 inch x 2 inch , plywood size 8 ft x 4 ft x 12 mm , plywood size 8 ft x 4 ft x 16 mm , plywood size 8 ft x 4 ft x 19 mm , pbs roll , bib cock steel brass , sunmica size 8 ft x 4 ft x 1 point 5 mm

corporations/Associations/Others

CTN :45033657

20 May, 2026 35.17 Lacs

Jhansi - Uttar Pradesh

Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

Wooden Staircase Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others