Latest woodruff key Tenders | Government woodruff key Tenders

CTN :41340485

16 Aug, 2025 NA

Nagpur - Maharashtra

Tender For supply of conveyer belt fastening hook (q4)

CTN :41347042

16 Aug, 2025 NA

Bathinda - Punjab

Tender For tender for supply of lv7/stln p-3108951 center bolt kit frt & rear spring p/485 , lv7/stln p-3705939 brush carrier assy , lv7/stln f9e12200 turn indicator bulb lamp , lv7/stln 5330-72-0366543 o ring (eng oil cooler) , lv7/stln 5330-72-0475282 hub seal rear , lv7/stln 5330-72-0117298 oil seal (id 155.73.od 182.86 w 15.87 , lv7/stln(vf) 5360-72-0472235 spring leaf , lv7/stln(vf) 4720-72-0000896 hose assy air duct , lv7/stln(vf) f-1760400 gasket turbo outlet joint extn , lv7/stln(vf) 5930-72-0081748 switch push , lv7/stln(vf) p-1307409 woodruff key , lv7/stln(vf) 5331-72-0321244 o-ring , lv7/stln(vf) f-7611960 cover speedo

Central Government/Public Sector

CTN :41352658

13 Aug, 2025 NA

Kapurthala - Punjab

Tender For set of carline assly for 3 phase memu tc coach, as per drawing: mpmemut3cla version 4, packing instruction: carline assly the supplier shall pack the three c/set (segme nts) of carlines in a suitably designed robust returnable metallic cage/structure in su ch a way that carlines shall not get entangle, damaged, twisted, dented during trans portation, storage, handling and lifting and to avoid scratches on outer surface suit able environment friendly cushioning material is to be placed between two segments, t ransit damage if any shall be at the cost of supplier. the packing cage/structure to be fabricated by using sq. tubes channels/angles having sufficient strength to bear appr oximate 1.5 tonne material load in static & moving condition of three coach set of carline. the bottom part of this packing cage/pallet should be such that curvature pr ofile of bottom carline should match with the profile of packing cage and it can acco mmodate fork lifter arms for lifting and transportation. it should have standard cla mping/fastening mechanism to facilitate easy unpacking & unloading. it should have fir m's identification/color mark. the packing cages along with set of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnable packing cages from rcf. it should also be suitable for storage of carline under open s ky. packing slip should be pasted on each cage showing p.o. no., pl no., description,drg. no./spec, , qty. , firm's name and address & despatch date etc. for identification. [ warra nty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41352660

13 Aug, 2025 NA

Kapurthala - Punjab

Tender For end wall complete for bangladesh lhb first ac coaches, as per drawing: bae1 5001 alt' a', packing instruction: 1. the supplier shall pack the end wall in a suitably design ed returnable fixture in such a way that end wall shall not get scratched, damaged, t wisted during transportation, storage and lifting and to avoid scratches on outer su rface. it should be seperated by suitable environment friendly blocks to avaoid rubbin g of two endwall surfaces . it should have standard clamping /fastening mechanism so that it can be opened easily. it should have firm's identification mark. 2. first returanable fixture along with end wall be retained by rcf & this fixture shall be exch anged in the second lot supply and so on. at the end of the contact, the firm shall col lect the remaining returnable packing fixture from rcf. 3. the packing fixture/frame to be fabricated having sufficient strenght to bear approximate 2 tonne load in static & moving condition of two coach sets of end wall. 4. the fixture /frame/pallet should be designed so that the packed end wall preferably remain in vertical position to minimize surface area. 5. it should also be suitable for storage of end wallunder open sky. [ wa rranty period: 30 months after the date of delivery ]

State Government

CTN :41355801

12 Aug, 2025 NA

Delhi - Delhi

Tender For repairing of all gear box and its accessories at wazirabad barrage. - dismantling of gearbox by removing both end couplings and extracting the complete shaft assembly from the barrage gates. this includes removal of thrust and steel blocks using skilled labour and specialized lifting equipment. the gearbox top cover (top half) shall be removed, followed by detachment of the bottom half from the main gearbox body. all internal components parts gear, changer gear assembly, bearing, limit shift assembly and shaft shall be carefully removed in sequence, ensuring proper identification and documentation of their orientation and order for accurate reassembly., dismantling of drumbox assembly by removing both end couplings and extracting the complete shaft,bear and gear assembly from the drum box .. all internal components parts gear, changer gear assembly, bearing, limit shift assembly and shaft shall be carefully removed in sequence, ensuring proper identification and documentation of their orientation and order for accurate reassembly., thorough cleaning of all components to remove debris, contaminants, and residual lubricants using appropriate cleaning agents and methods. detailed inspection of each component to assess condition, identify wear, damage, or corrosion, and document findings for further repair or replacement as required., repair of limit switch assembly of gear box including the complete overhauling /oiling and greasing including replacement of parts as per sample ., replacement of normally open (no) switch and contactor with a relay, along with the complete installation of electrical components for the gear box in the hoisting mechanism of the barrage system, replacement of brake pad as per sample along with complete fitting and integration in the gearbox assembly, replacement of brake coil as per sample along with complete fitting and integration in the gearbox assembly, replacement of bearing no 6315/c4 djb approved makes, replacement of bearing no 6312m/c3 djb approved makes, replacement bearing no 6308 2rs1 djb approved makes, replacement bearing no 6310 2rs1 djb approved makes, complete assembly of the gearbox, including packing, greasing, and installation of both end shafts with cast iron (c.i.) couplings and bolts. ensure proper alignment and secure fastening to maintain efficient power transmission and operational reliability, complete overhauling and lubrication of all moving and critical components of the drum box assembly of the gearbox, using appropriate tools such as grease guns and nipples. the work shall be carried out by skilled labor as per site requirements. ensure proper lubrication with the specified grade and viscosity of grease to maintain optimal performance and prevent wear and tear of mechanical parts including internal parts of painting, the work involves achieving precise/making alignment of the shaft connecting the drum box and gear box in the hoisting mechanism of the barrage. proper alignment is critical to prevent deviation from the guide grooves during operation particularly during lifting and to ensure long-term stability and accuracy of sluice gate movement.the job includes dismantling the existing shaft (which transmits motion between the drum box and gear box), carrying out realignment, and reinstalling the shaft with high precision. to restore the system to optimal operating condition, the work shall also involve the replacement of associated hardware components as required such as bearings, couplings, keys, and fasteners.this intervention is essential for the reliable and efficient functioning of the sluice gate lifting system and to prevent operational issues during gate actuation., after cleaning and overhauling the gear and shaft of the gearbox, refit and them in their original positions with making alignment with all movement parts of gear box and ensure that they are functioning properly., conduct load testing of 3under sluice and 3weir side gates and weir side gates during

Central Government/Public Sector

CTN :41325181

10 Sep, 2025 NA

Abu Road - Rajasthan

Tender For construction of broad gauge ballastless track (blt) system with transition from ballastless to ballasted track in tunnels/bridges with contractors own proven ballastless track along with fastening system (total length - 15.091 km) in dalpura-hadad section and amba mahuda to abu road stations in connection with taranga hill - abu road via ambaji new line project in ajmer division, north western railway in the state of rajasthan and gujarat

Central Government/Public Sector

CTN :41339141

11 Aug, 2025 NA

Gwalior - Madhya Pradesh

Tender For supply of pop riveting machine (rechargeable) for fastening rfid tag rivet. as per attached specificati on [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41160741

10 Sep, 2025 NA

Abu Road - Rajasthan

Tender For corrigendum : construction of broad gauge ballastless track (blt) system with transition from ballastless to ballasted track in tunnels/bridges with contractors own proven ballastless track along with fastening system (total length - 15.091 km) in dalpura-hadad section and amba mahuda to abu road stations in connection with taranga hill - abu road via ambaji new line project in ajmer division, north western railway in the state of rajasthan and gujarat

CTN :39978454

09 Oct, 2025 147.33 Crore

Bangalore - Karnataka

Tender For corrigendum : design, supply, installation, testing and commissioning of ballastless, ballasted track, fastening system and turnouts from chainage (-) 635 to chainage 46,985 m from heelalige to rajanukunte in corridor 4 of bsrp

corporations/Associations/Others

CTN :41277675

07 Aug, 2025 NA

Pimpri - Maharashtra

Tender For 3/2025-26 estimated rates for uhwc instruments - estimated rate for instruments uhwc, technical specification of dressing tray with cover material should be stainless steel medical grade size 300*200*50mm with led, technical specification of dressing drums with cover 11 19 material should be stainless steel ss 304 capacity 0.945 liters should be seamless, technical specification of weighing machine (infant) capacity upto 20 kg resolution 10 gm. accuracy + 1to 10 gm. measuring position supine, sitting and standing. large lcd display, technical specification of surgical scissors made of stainless steel 150 mm, 6 inch size, technical specification of sphygmomanometer aneroid 300mm with cuffkey technical specifications:cuff: typically made of durable, washable material (e.g., nylon) and reinforced at the sides. size: ranges from child to adult sizes (small, medium, large, extra-large), and ideally, the cuff bladder length should be at least 80% of the patients arm circumference and the width at least 40%. fastening: usually features velcro or similar for a secure fit. bladder: inflatable bag within the cuff, connected to the inflation system. inflation system: bulb with a valve for inflating the bladder and a pressure release valve. gauge:aneroid: features a dial with a needle indicating pressure, usually graduated in 2 mmhg increments from 0 to 300 mmhg. digital: provides electronic readings of blood pressure and may include features like pulse rate measurement. tube: typically made of rubber or silicone, crack-resistant, with a length of around 70 cm. accuracy: aneroid gauges are generally calibrated to meet certain accuracy standards, such as +/- 3 mmhg. materials: materials used in sphygmomanometers must be durable, corrosion-resistant, and suitable for the intended use. environmental: sphygmomanometers are designed to function within specific temperature and humidity ranges, typically 5 to 40 c and 15 to 85% rh. , technical specification of sims retractor/depressor 1/2/3/4 size stainless steel material should be medical grade anticorrosive and nonmagnetic , technical specification of cheatle foreceps 8/10/12 size stainless steel material should be medical grade anticorrosive and nonmagnetic, technical specification of sponge holder 6/8/10/12 size stainless steel material should be medical grade anticorrosive and nonmagnetic , technical specification of plain forcep plain forcep of size 6/8 inchs stainless steel material should be medical grade anticorrosive and nonmagnetic , technical specification of tooth forcep tooth forcep of size 6/8 inchs stainless steel material should be medical grade anticorrosive and nonmagnetic , technical specification of needle holder 6/8 inchs long, locking stainless steel material should be medical grade anticorrosive and nonmagnetic , technical specification of stethoscope chest piece finish : black, machined stainless steel chest piece size : 1.75 inch / 4.4 cm chest piece technology : double sided diaphragm material :epoxy/fiberglass eartip type : soft sealing headset material : wide diameter aerospace alloy / anodized aluminium length : 28 inch stethoscope with extra ear plug & diapharm, technical specification of hub cutter the cutting blade of the cutter will be made of stainless the thickness of the blade will not be less than 0.5 mm one side sharpen to cut minimum of 10,000 cuts. all other metal if used in the hub cutter will be made of galvanized carbon steel which will withstand rusting even in rough weather with high humidity coastal region for a minimum of five year(is 277 of 2003 galvanized steel sheet specification) the sharp container should be made of polypropylene (pp) of not less than 4 mm thick and should be white/translucent. shape: the shape of the container will be such that the lid is tightened with the body. capacity range : able to destroy from hub of ad syringe with needles from 18-28 gauge diameter and from 10-25 mm length and fitted with all types of needle fitti

Woodruff Key Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others