Latest woodwork Tenders | Government woodwork Tenders

CTN :45738908

15 Jul, 2026 NA

Usmanabad - Maharashtra

Tender For executive's table @ 1800lx900dx750ht , executive's table @ 1800lx900dx750ht 1st floor , executive table with credenza , executive table with credenza 1st floor , medium height partition , medium height partition 1st floor , conference table , low height openable storage , low height openable storage 1st floor , full height steel storage , full height steel storage 1st floor , book case with glass shutter , book case with glass shutter 1st floor , public seating chair 3 seater , public seating chair 3 seater 1st floor , stool for lab & class iv , aluminium foldable ladder , sofa set 3+ 1+ 1 , tea table , double faced mobile unit for compactor , 12 seater reading table , curvilinear workstation , high back chair , high back chair 1st floor , mid back chair , mid back chair 1st floor , decorative teak plywood veneer lining , decorative teak plywood veneer lining 1st floor , veneer finish wall paneling , teak veneer partition , teak veneer partition 1st floor , 19mm plywood , 12mm plywood , veneer , m. s. screws , aluminium handle , carpenter class i skilled

State Government

CTN :45449319

03 Jul, 2026 80.56 Lacs

Faridabad - Haryana

Tender For corrigendum : supply of providing and placing ss304 laboratory stool as per specifications mentioned at serial number 1 of the scope of work , providing and placing a medium back laboratory chair as per the specifications mentioned at serial number 2 of the scope of work , providing and placing a printer table as per the specifications mentioned at serial number 3 of the scope of work , providing and placing a wooden workstation with an overhead cabinet as per the specifications mentioned at serial number 4 of the scope of work , providing and placing ss304 laboratory work bench module as per specifications mentioned at serial number 5 of the scope of work , providing and placing ss304 laboratory work bench module as per specifications mentioned at serial number 6 of the scope of work , providing and placing ss304 laboratory work bench module as per specifications mentioned at serial number 7 of the scope of work , providing and placing ss304 laboratory work bench module as per specifications mentioned at serial number 8 of the scope of work , providing and placing ss304 laboratory work bench module as per specifications mentioned at serial number 9 of the scope of work , providing and placing ss304 laboratory work bench module as per specifications mentioned at serial number 10 of the scope of work , providing and placing ss304 laboratory work bench module as per specifications mentioned at serial number 11 of the scope of work , providing and placing mobile compactor storage system as per specifications mentioned at serial number 12 of the scope of work , providing and placing ss304 open storage rack as per specifications mentioned at serial number 13 of the scope of work , providing and placing ss304 slider storage unit as per specifications mentioned at serial number 14 of the scope of work , providing and placing ss304 laboratory work bench module as per specifications mentioned at serial number 15 of the scope of work , providing and placing ss304 laboratory table as per specifications mentioned at serial number 16 of the scope of work , providing and placing ss304 necropsy table as per specifications mentioned at serial number 17 of the scope of work , providing and placing ss304 anti vibration table as per specifications mentioned at serial number 18 of the scope of work , providing and placing ss304 laboratory work bench module as per specifications mentioned at serial number 19 of the scope of work , providing and placing ss304 anti vibration table as per specifications mentioned at serial number 20 of the scope of work , providing and placing pp tall storage unit as per specifications mentioned at serial number 21 of the scope of work , providing and placing ss304 laboratory work bench module as per specifications mentioned at serial number 22 of the scope of work , providing and placing pp tall storage unit as per specifications mentioned at serial number 23 of the scope of work , providing and placing ss304 laboratory work bench module as per specifications mentioned at serial number 24 of the scope of work

State Government

CTN :45684603

06 Jul, 2026 NA

Haringhata - West Bengal

Tender For rate quoted for mgnrega work various material under haringhata block - rate quoted for mgnrega work various material under haringhata block, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket

CTN :45682661

20 Jul, 2026 NA

Ranchi - Jharkhand

Tender For supply, installation and commissioning of dust free storage system comprising rail /channel mounted multibay compactor static & mobile units. specification & drawing attached. this storage system shall be fabricated from crca-grade- d & dd of thickness 20-22swg. [ warranty period: 24 months after the date of delivery ] ]

CTN :45688824

16 Jul, 2026 11.75 Lacs

Ahmedabad - Gujarat

Tender For supply of mobile storage compactor-single fix unit , mobile storage compactor-double face moveable unit , mobile storage compactor-single moveable unit , mobile storage compactor indexing arrangement , mobile storage compactor

CTN :45307632

27 Jun, 2026 NA

Ambala - Haryana

Tender For bid to ras supply of weapon storage safe compactor

Central Government/Public Sector

CTN :45664534

30 Jun, 2026 NA

Salem - Tamil Nadu

Tender For supply of shifting of mobile storage system (file compactor) single bay 8 units [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]