Latest work platform Tenders | Government work platform Tenders

CTN :45733820

21 Jul, 2026 NA

Khorda - Odisha

Tender For construction of concrete working platform and bio secured containment facilities for genome editing laboratory at icar- cifa, kausalyaganga, bhubaneswar

corporations/Associations/Others

CTN :45696580

08 Jul, 2026 NA

Kolkata - West Bengal

Tender For supply, delivery, installation of one number dismantling joint along with replacement of worn out spare parts, testing and commissioning of 750 mm dia. pdv and other allied works of pump unit no. 5 at cwps-ii, grww. - supply, delivery, installation, testing andcommissioning of 700 mm dia ms dismantling joints., dismantling counter weight, lever, arm, hydraulic unit etc. and all other components of the hydraulic system one by one of 750 mm dia. pump discharge valve parts by parts sequentially and cautiously as per direction of the engineer-in-charge (eic) at grww., dismantling the 750 mm dia. pdv from the existing pipe-bay, installatio/fitting-fixing of barrel-piece/flange and lifting & keeping the same on the working platform sequentially and cautiously as per diretion of the eic at grww., to and fro transportation charges of 750 mm dia. pdv from grww to workshop including loading and unloading.., dismantling all the components of 750 mm dia. pdv parts by parts sequentially and cautiously as per direction of the eic at grww/workshop., supply, delivery and fitting-fixing of drive shaft of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of valve seal of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of seat ring (ss 410) of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of seat ring (epdm rubber) of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of stub bearing bush of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of drive bearing bush of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of clamping ring of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of end cover of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of o ring of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of shaft pin of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of allen screw of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply,delivery and fitting-fixing of gland plate of 750 mm dia. pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of shaft key of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., repairing the damaged portion of the hole for holding the bearing of 750 mm dia. pdv by deposting metal, boring, machining, grinding etc., all complete, as per original shape and size and direction of eic at grww.., re-aasembling all the components of 750 mm dia. pdv parts by parts sequentially and cautiously as per direction of eic at grww., performing of necessary hydro-testing of the disc and body of 750 mm dia. pdv as per direction of eic at grww., lowering from the working-bay, installation, fitting-fixing of 750 mm dia. pdv in the existing pipe-bay removing the existing barrel-piece/flanges as per direction of the eic at grww., re-assembling and re-fitting all the components of the hydraulic system like counter weight, lever, arm, hydraulic unit etc. with the existing 750 mm dia. pdv installed in the pipe-bay parts by parts sequentially and cautiously as per direction of the eic at grww., test run, operation and commissioning of the entire system of 750 mm dia. pdv as per direction of the eic at grww.

CTN :45681500

01 Jul, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of hydraulic mobile elevating work platform of working height 10 feet, load bearing capacity -900 kg with 4 nos. wheel material mild steel having anti rust coating and outer body paint in yellow color platform dimension 6 feet x 4 feet and having safety railing from 03 side [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45649862

07 Jul, 2026 NA

Dwarka-Guj - Gujarat

Tender For tender to invite bids for rent material for sf division, devbhumi dwarka - dome pavilion waterproof (sq.ft) (on rent) , net flooring (on rent) , plastic chair (on rent) , vip chair with cover (on rent) , sound system (on rent) , glass teepee (on rent (2h) , generator set (on rent) , site paneling (on rent) , red carpet jute materials (on rent) (for arranging in entry) , podium (on rent) , diya (on rent) , box gate truss (on rent) , service table (on rent 42) , jumbo cooler (on rent) fan main stage (rental) , leather sofa (rental) , steel sofa (rental) , l.e.d screen (rental) , catering (general) , catering (vip) ,tea and water provision work ,snack provision work ,photography work ,videography work , waterproof pavilion span , plain pavilion span , banner

Corporations/Associations/Others

CTN :45621777

24 Jun, 2026 NA

Washim - Maharashtra

Tender For supply of necessary materials and related works to biogas project within the limits of nagar parishad karanja district washim - material, reinforced plastic fibre gas holder 1.3 mtr thickness 5mm clamps, ms dome fitting, gas collection flexible pipe, valve, gaskets...etc. complete., h2s + co2 scrubber; diffuser gas purification etc. complete ms + epoxy; dia. 736mm; height 1250 mm both side dish end nozzle according to drawing, pressure meter + temperature sensor + flow meter etc. complete, slury feed pump capacity (capacity range between 0-30cum/hr) etc complete., side entry agitator power 3 hp moter with gear box etc. complete shaft moc ss304; shaft length 3980mm; impeller ss304; coupling ms, bio-waste shreder with hopper ( 2 working 1 standby) etc. complete motor-10 hp make- crompton or bbl or abb (3phase); moc of structure: ms; motor speed: 1500, waste grider for pulp/slurry making capacity kg /hr (1 working 1 standby) moter 10hp +, digester heating systerm, heat exchanger tube with hot water generation and recirculation system... etc. completediameter 5700 mm; 50 nb pipe; ss 316 coil thicknessof pipe 6mm., reinforced plastic biogas storage bags etc. complete cylindrical shape-200m3 capacity., genset bio gas 50 kva / 40 kwe; biogas generator set with canopy accoustic enclosure etc. complete, screw press technology based solid liquid seperator capacity 5000lit/hr etc complete., slurry mixer for primary digester/feed tank with 3hp motor with ss-impelar and shaft etc complete.

State Government

CTN :45621543

29 Jun, 2026 2.73 Lacs

Angamaly - Kerala

Tender For mp-lads-angamaly bp-mp lads 2024-25 honble mp sr. p.p.suneer ( rajyasabha) construction of open gym and installation of equipment at chakkala pongam area of ward -13, thuravoor grama panchayat (infrastructure & purchasc) ernakulam district-general civil work - platform for open gym, 2.32:clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared., 2.8.1:earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil, 4.1.8:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources), 4.3.1:centering and shuttering including strutting, propping etc. and removal of form work for:foundations, footings, bases for columns, 4.1.3:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-iii)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources), od228316/2023-2024:construction of granular sub-base by providing local material, spreading in uniform layers on prepared surface and compacting by ramming to achieve the desired density complete i) using gravel mix/quarry muck, od223449/2023-2024:providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of stone aggregate, compacting and proper embedding/laying of inter locking paver blocks into the stone aggregate bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer-in-charge.60mm thick cement concrete paver block of m-35 grade with approved colour, design & pattern. modified spec. 16.91.1, od134330/2025-2026:providing and fixing gi pipe hand rail of approved size by welding and all labour charges etc., 5.23:smooth finishing of the exposed surface of rcc work with 6mm thick cement mortar 1:3 ( cement : 3 fine sand)., 13.52.2:finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.on concrete work, 13.52.1:finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.on steel work, od133367/2025-2026:supplying and fixing white stone bench with back rest,2 seater, od139386/2025-2026:providing and laying of interlocking concrete block pavements using80 mm m 40 interlocking paver blocks made by strong vibratory compaction of approvedsize,design @ shape ,laid in required pattern over and including a compacted bed of 6 mm stoneaggregate of 50 mm average thickness etc all complete as per the direction of engineer incharge., od234555/2023-2024:supplying and fixing in place granite name board of slab area less than 0.9sqm includingengraving and painting letters etc complete as per direction of engineer in charge at sitedar spec

State Government

CTN :45617866

10 Jul, 2026 NA

Thiruvananthapuram - Kerala

Tender For supply of adult humidifier chamber with transparent plastic dome

Central Government/Public Sector

CTN :45449751

29 Jun, 2026 NA

Barh - Bihar

Tender For corrigendum : supply of item_ 10_ m6500000773_ 100273991_ platform: aerial work platform, 10m, 200kg

Central Government/Public Sector

CTN :45577741

01 Jul, 2026 9.09 Lacs

Gulbarga - Karnataka

Tender For supply of supply of 3 core 2.5 sqmm, fr lsh pvc insulated industrial grade copper conductor flexible cables, 1100 volts conforming to is 694. , supply of 4 core 4 sqmm, fr lsh pvc insulated industrial grade copper conductor flexible cables, 1100 volts conforming to is 694. , supply of 4 core 10 sqmm, fr lsh pvc insulated industrial grade copper conductor flexible cables, 1100 volts conforming to is 694. , supply of 3 to 3.5 mtr telescopic boom arm suitable for time watch boom barrier , supply of 400mm sweep pedestal fan with plastic body and blades, height adjustable with standard accessories suitable for operation on 230v, single phase ac supply etc., as required , supply of 400mm sweep wall fan with plastic body, mounting arrangement with standard accessories suitable for operation on 230v,single phase ac supply etc., as required. , supply of following, c curve, miniature circuit breaker suitable for operation on 230 415 v, ac supply, 10 ka breaking capacity of following poles etc. as required. 6 a to 32 a sp mcb , supply of following, c curve, miniature circuit breaker suitable for operation on 230 415 v, ac supply, 10 ka breaking capacity of following poles etc. as required. 20 a dp mcb , supply of following, c curve, miniature circuit breaker suitable for operation on 230 415 v, ac supply, 10 ka breaking capacity of following poles etc. as required. 20 a tp mcb , supply of following, c curve, miniature circuit breaker suitable for operation on 230 415 v, ac supply, 10 ka breaking capacity of following poles etc. as required. 40 a fp mcb , supply of following, c curve, miniature circuit breaker suitable for operation on 230 415 v, ac supply, 10 ka breaking capacity of following poles etc. as required. 63 a fp mcb , supply of 40 a, double pole, residual current circuit breaker rccb, having a sensitivity current 100 ma suitable for operation on 230 v, single phase ac supply etc. as required. , supply of 63 a, four pole, 415 volts, residual current circuit breaker rccb, having a sensitivity current 300 ma suitable for operation on 415 v, single phase ac supply etc. as required. , supply of iro pro uo r relay c and s make.under voltage over voltage relay. , supply of four pole, contactor with ac 1 rating 40a and 230v ac coil voltage , supply of 2no plus 2nc 10a, contactor with 24v dc coil. , supply of 2no contractor with 24 v dc coil. make schneider model a9c20132 or equivalent , supply of 2mp dome camera suitable for existing cctv system. make honeywell, part no impact i hee2pl lp , supply of 2mp bullet camera suitable for existing cctv system. make honeywell, part no impact i hibb2pi lp , supply of media converter suitable for existing cctv system. make tricom , supply of poe switch 8 port suitable for existing cctv system. make dlink. , supply of sim based gsm autodialer along with 24v 2amp smps suitable for existing fire alarm system including . make pinnacle.

CTN :45586543

16 Jul, 2026 NA

Ludhiana - Punjab

Tender For manufacture, testing, supply and delivery of insulated aerial work platform and hotline tools for hotline working at 66kv voltage level and providing manpower for hotline working

Work Platform Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

Corporations/Associations/Others

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector