Latest work rest blade Tenders | Government work rest blade Tenders

CTN :43221763

27 Dec, 2025 NA

Siang - Arunachal Pradesh

Tender For supply of chain pulley 5 ton capi d d - chain pulley 5 ton cap differetial , wheel barrow double wheel , bar bending machine 32 mm dia hydraulic , bar cutting machine bosch gws900 100 or equivalent , hand cutter machine for 13 mm prestressing cable bosch gco 220 or equivalent , electric concrete vibrator , vibrator needle 60 mm , vibrator needle 40 mm , vibrator needle 25 mm , electric welding transformer 300 amps , master wedges , standard high pressure hydraulic pipes designed for usha martin ismal 19 13 , hydraulic jack with handle 20 ton capacity , hydraulic jack with handle 40 ton capacity

CTN :42670227

20 Dec, 2025 NA

East Sikkim - Sikkim

Tender For bid to ras supply of lab eqpts d d--atm universal testing machine (q3) , motorized core cutting machine (q3) , infrared moisture meter , core cutter apparatus , auger outlift post hole type with 50mm dia auger head , auger outlift post hole type with 100mm dia auger head , electronic balance 20kg, 1gm readability , electronic balance 600gm, 0 point 01gm readability , thickness gauge , benzene , hos ennore sand grade1 , hos ennore sand grade2 , hos ennore sand grade3 , marshal test apparatus with digital display , centrifuge extractor motorised , liquid limit test apparatus manual , shrinkage limit test equipment , plate bearing test apparatus , apparatus for determination of specific gravity of fine and coarse aggregate , pan concrete mixture , vibrating table , rebar locator and corrosion analyser , benkelman beam apparatus , bitumen viscosity test apparatus , maximum theoretical specific gravity test apparatus , cement mortar cube vibrating machine , rain guage ) /bid number : gem/2025/b/6865330 * /dated: 07-11-2025 & & / bid document 1 / 30

State Government

CTN :42813292

23 Dec, 2025 NA

Multi City - Telangana

Tender For corrigendum : tggenco-ytps(5x800mw)-supply of t and p items required for stage-i and chp of ytps. - ac/dc volts (40hz to 500hz):4.000v, 40.00v, 400.0v, 1000v; resistance (ohms): 400.0 ohm, 4.000 kohm, 40.00 kohm, 400.0 kohm, 4.000 mohm, 40.00 mohm; capacitance: 40.00nf, 400.0nf, 4.000 µf, 40.00 µf, 400.0 µf, 1000 µf; ac/dc current: 4.000a, 10.00aac/dc millivolts: 400.0mv; diodetest: 2.000v;ip rating: ip40safety: iec 61010-1, iec 61010-2-030 cat iii 600v, cat ii 1000v, pollution degree 2.temperature: 50-400°c, 0-50°c, -55 to 0°c.temperature: operating: 0°c to 40°c;storage: -30°c to 60°celectromagnetic environment: iec 61326-1:portableincluded accessories: test leads with caps, thermocouple, temperature probe, 2 aa batteries, user manual along with the required calibration certificates.gds 18v-400 cordless impact wrench;battery voltage: 18v; torque max: 400nm; no load speed: 0-3,400 rpm. make: boschfluke true rms ac/dc digital clamp meter with iflex probe and fluke connect modelno: 376digital multimeter, make: fluke, model: 17b+, specifications: ac/dc current 10 amps, ac/dc voltage 1000 voltsmegger, 1kvleakage current clampmeter ac, range (0-100a)portable hot air blowervacuum cleaner, dry, 1300w, 6.1kg, 230v, 50hzvibration meter, digital, model: ird 306analog phase sequence indicator, 100 to 500 v, 25 to 65 hzdigital earth resistance tester with resistivity test facility, earth resistance: 0.01 ohms-200 kohmsplier, nose, 6"/150 mmhammer, 4 lbcutting plier, 12"39 , gds 18v-400 cordless impact wrench; battery voltage: 18v; maximum torque: 400 nm; no load speed: 0-3,400 rpm. make: bosch. , fluke true rms ac/dc digital clamp meter with iflex probe and fluke connect, model no: 376, , digital multimeter, make: fluke, model: 17b+, specifications: ac/dc current 10 amps, ac/dc voltage 1000 volts, , megger, 1kv, , leakage current clamp meter ac, range (0-100a), , blower, portable hot air, , vacuum cleaner, dry, 1300w, 6.1kg, 230v, 50hz, , vibration meter, digital, model: ird 306, , analog phase sequence indicator, 100 to 500 v, 25 to 65 hz, , digital earth resistance tester with resistivity test facility, earth resistance: 0.01 ohms–200 kohms, , plier, nose, 6"/150 mm, , hammer, 4 lb, , cutting plier, 12", , tape, measuring; length: 3 m; material: steel, , tape, 5 meters measuring tape, , tape, 30 meters measuring tape, , hole punch set 22, 20, 18, 16, 14, 12, 10, 8, 6, 4 set of 10 nos (tiger make), , center punch, length: 125 mm, , drilling machine, rated power input: 800w, 240v, drilling diameter in concrete with hammer drill bits: 4-26 mm, , digital motor checker: emc-38, , transformer, auto; type: manual operated variable; input voltage: 240 vac; output voltage range: 0-270 v ac; special features: (dimmerstat) with continuously variable banana terminals, capacity: 20 amps; model: 20d-1p, , transformer, auto; type: manual operated variable; input voltage: 415 v ac; output voltage range: 0-470 v ac; phase: 3; special features: 50 hz; model: 15d-3p, , lux meter, digital, 0-50,000 lux with silicon photodiode sensor, lcd display, dc 9v battery, mandatory accessories, , tachometer, digital; speed range: 9999/99999 rpm; model: v, , digital micro ohm meter, model dmo-100d, , gun, laser, , specifications:, , laser convergence distance: 50" (127cm) ir range: -58 to 3992°f (-50 to 2200°c) emissivity: 0.10 to 1.00 adjustable, , max resolution: 0.1°f/°c, , field of view (distance to target): 50:1

CTN :43168515

01 Jan, 2026 43.05 Lacs

West Tripura - Tripura

Tender For supplying, installation, testing and commissioning of machines and equipment for civil engineering department at ttaadc polytechnic institute, khumulwng, west tripura for the project improvement of infrastructure in ttaadc polytechnic institute, kh - supplying, installation, testing and commissioning of machines & equipment in civil engineering department at ttaadc polytechnic institute, khumulwng, west tripura under the nec scheme "improvement of infrastructure in ttaadc polytechnic institute, khumulwng, west tripura, district under higher education departmen.", computerized universal testing machine, 6 pillar type, for conducting tests on various types of ferrous and non-ferrous materials; consisting of-loading unit 600 kn capacity, hydraulic jaws and pumping system, clamping jaws for round specimens, clamping jaws for flat specimens, pair of compression plates,for compression test, rollers of 160 mm width and 30 mm diameters, for transverse test, bending table stopper, allen keys, spanners,double shear test attachment, bend rebend test attachment, electronic extensometer., steel bar cutting machine, vernier caliper, stainless steel ruler, 1m length, mixer machineriesconcrete mixerthe counter balanced mixing drum is easy to tilt two cubic feet mix capacity. total drum volume is 3 cubic feet.. suitable for operation on 220 volt single phase, 50 cycle, a.c. supply, isi cube mouldcube mould, with base plate : as per is : 516 with isi mark cube mould, 15 cm x 15 cm with base plate (made of cast iron - isi mark), cement mortar cube mouldcement mortar cube mould cube mould, 7.06cm x 7.06cm with base plate (made of mild steel), vibrating machinevibration machine with timer : is : 4031 this apparatus is suitable for making cubes of 70.7 mm. for mortar strength evaluation. the mould is mounted on a vibrating platform with a frequency of 12,000 400 vibrations per minute. to the platform are attached four matched springs. the whole assembly is operated by a revolving shaft with an eccentric mechanism. the machine is supplied with a timer, a switch mounted on a steel panel and a 70.7 mm. steel cube mould with a base plate., electronic balancecapacity 500gm, 0.01 gm accuracy, electronic balancecapacity 5kg, 0.1 gm accuracy, electronic balancecapacity 20kg, 0.5 gm accuracy, electronic balancecapacity 100 kg, 10g accuracy, air permeability apparatus (blaine type)isi certification mark is;5516, fitted in aluminium box, vibrating tablevibrating table for compaction concrete cube, cylinders the table deck size 50 cm x 50 cm and has stops along its edges to prevent moulds from walking off the table during vibration the variably pitch pulley arrangement permits the frequency to be varied sleeplessly between a maximum of 3600 vibrations per minute a speed regulation handle is provided for increasing or decreasing the frequency. the vibrating deck. a switch is provided for starting the motor. operation on 440 volts, three phases, a.c. supply. table top - 50 cm x 50 cm, curing tankwater curing bath with agitation system digital indicator for temperature * 24- hour cycle from time of mixing * controlled 100 c +/- 2 c. temp. for concrete * controlled 27 c + 2 c curing temperature for grey cement the tank has been designed to accommodate 150 mm / 70.6 mm casted cubes up to 12/24 cubes and fully insulated. complete with a hinged lid, heated, thermostat and recirculation pump. provision of two removable racks allowing free circulation of water around each cube. the pump, drain valves and electrical equipment are housed in a compartment located at one end of the tanks. the tank is heated by an immersion heater under normal conditions and refrigeration system for grey cement, the temperature is controlled at 35deg.c. +/- 2 deg.c, for about 15 minutes after immersion of the freshly-made specimens. curing tank for 12 moulds of 150mm/24 moulds of 7.06mm, vicat apparatus boxwith isi certification mark, is:5513, fitted in aluminium, le-chatelier mouldwith

State Government

CTN :42779169

23 Dec, 2025 31.11 Lacs

Mumbai - Maharashtra

Tender For corrigendum : three years annual rate contract for supply of spares and consumable items for electrical and mechanical division - three years annual rate contract for supply of spares & consumable items for e&m division, direct mounting pressure gauge 0-10 bar, danfoss differential pressure switch (range 0.2-7.5 bar), indfos differential pressure switch (range 1-10 bar), 22 kg co2 high pressure hose with horn, discharge pipe of abc fire extinguisher, insulation tape (black), teflon tape, rubber gasket sheet 3mm, taps for water purifier, notifier smoke detector fapt-851, notifier manual call point f-mcp-glass, notifier monitor module fmm-1, notifier control module fcm-1, notifier relay module frm-1, notifier fault isolator module iso-x, flasher cum hooter sys-hs, ravel photo & heat multi detector (model.re316sh-2l), float switch 230vac, ip67 with 5-meter inbuilt cable, 2.5 sq mm frls copper wire (r,g,b- 300 mtr each), 4 sq mm frls copper wire (r,g,b- 300 mtr each), 2.5 sq mm frls 3 core copper cable, polish paper (sand paper 120), spray paint (silver,black & red), duracell aa 1.5 volt cell, duracell aaa 1.5 volt cell, digital astronomical timer, digital timer, pin type lug 2.5 sq mm, pin type lug 6 sq mm, pin type lug 1.5 sq mm, ring type lug 6 sq mm, ring type lug 10 sq mm, ring type lug 25 sq mm, ring type lug 4 sq mm, kirloskar foot valve - 150mm spring type, kirloskar foot valve - 80mm spring type, kirloskar foot valve- 65mm spring type, kirloskar foot valve- 100mm spring type, kirloskar foot valve- 75mm spring type, kirloskar foot valve- 40mm spring type, nut & bolt with washer - size m6*20mm, nut & bolt with washer - size m8*20mm, nut & bolt with washer - size m10*30mm, nut & bolt with washer - size m12*50mm, silicon sealant cartridge, drill bit set (hss)- set of 13 bits, concrete drill bit set- set of 5 bits, cable tie 150mm, cable tie 250mm, ceiling fan capacitor 2.5 micro f., exhaust fan capacitor 2 micro f., grinding & cutting wheel 107x1x16mm for ag4 grinding machine, electrical insulated gloves full palm rubberization -1000v resistance non-slip, htc smps-3005 0-30 v, (0-5 a) dc regulated power supply, mk one module blank plate, schneider 6/16 amp modular socket, schneider 6/16 amp modular switch, legrand 6/16 amp modular socket, legrand 6/16 amp modular switch, mk 6/16 amp modular socket, mk 6/16 amp modular switch, 3 module surface box, 3 module modular plate, 1 mm frlsh wire (red), tds meter- isi mark, ip68 (+-0% tolerance), taparia line tester, portable digital weighing machine (150kg), flex quick instant adhesive, 3m double tape (2 mm thick with width 25 mm & length 10 mtr), heavy duty pipe wrench (315 millimetre), pressure gauge with hose, air charging 230volt electric pump (200 psi), dol starter 5hp, gemtax v-belt- no-a1484 lp a/57 belt (for polyhouse fan), gemtax v-belt- no-a1814 lp /a70 belt (for polyhouse fan), gemtax v-belt- no-a76 belt (for polyhouse fan), raval plug 35mm, philips choke for ip 20,33-watt lights, philips 33w light fittings 1 feet x 4 feet, kirloskar nrv 40mm, flg std- bs10d, body ms, disc cs, seat nbr, class pn16, kirloskar nrv 65mm, flg std- bs10d, body ms, disc cs, seat nbr, class pn17, chain wrench 150mm, brush cutter wire (round shape), led 50w driver, input 100-300 vac, output dc56-75v, led 30w driver, input 100-300 vac, output dc30-56v

CTN :43140789

02 Jan, 2026 5.61 Lacs

Multi City - Karnataka

Tender For supplying materials for construction of govt h p school compound at meenalli - sc2-ms flat 12 x 75mm, sc2-cast iron ornamental design, sc2-m.s. square bright bars 20mm, sc2-cast iron arrows, sc2-welder grade i, sc2-hom of welding and grinding machine, sc2-mechanic class ii/mechanic hmp grade i/eme grade, sc2-hom of cutting and grinding machine, sc2-painter class i, sc2-add providing and removing scaffolding at 3 percent on labour, sc2-enamel metal paint, sc2-tools & plants and electrical charges at 2 percent, sc2-plastic emulsion paint, sc2-add brush putty sand paper roller at 5 percent on cost of paint, sc2-silver oak or equivalent planks 38 mm thick, sc2-casurina poles 100 - 150 mm, sc2-portland cement, sc2-coarse sand (zone iii), sc2-mixer (concrete small used in culvert), sc2-add watering charges at 1 percent on material, sc2-broken stone aggregate 20 mm size, sc2-broken stone aggregate 12 mm to 10 mm size, sc2-mixer (concrete) - 1 cum capacity, sc2-solid concrete blocks (40 x 15 x 20 cms) 4 n/sqmm, sc2-tmt bars fe 500, sc2-binding wire, sc2-plasticizer / super plasticizer, sc2-boulders, sc2-size stone 20 x 20 x 25 cms, sc2-bond stone 20 x 20 x 45 cm, sc2-broken stone aggregate 40 mm size, sc2-granite/trap broken metal 100 mm and down size

Central Government/Public Sector

CTN :43144742

01 Jan, 2026 74.32 Lacs

Tiruchirappalli - Tamil Nadu

Tender For supply of sitc of additional scctv cameras at nitb and fire station at trichy airport c c - supply of 16 channel nvr , supply of 55 inch display , supply of cat6 utp cable , supply of 10tb hdd , supply of 8 port poe switch , supply of 6u indoor rack , supply of 2 mp dome type ip indoor camera , supply of 5 mp bullet type ip outdoor camera , supply of 2 mp ptz type ip outdoor camera , supply of 25mm dia pvc waterline pipe , supply of 1kva online ups , supply of single-mode 6-core optical fibre cable outdoor type , supply of media converter , supply of rf link , itc of scctv management system , supply of accessories required for 6 core single mode fiber cable , 1st year camc charges , 2nd year camc charges , 3rd year camc charges , sitc of 12 port l3 external netwok switch , supply of cat 6a copper conductor outdoor utp cable , supply of 15ru outdoor equipment rack , supplying and laying of 63mm dia dwc hdpe pipe , cutting with machine in bituminous or cement concrete , supply of full hd optical zoom 33x 2 mp ptz type ip outdoor camera , supply of 2 mp fixed type ip outdoor camera , supplying and fixing of 4 mtr height gi octogonal pole , charges for providing necessary vms application license , supply and laying of cable of size 3 core x 4 sqmm frls copper conductor xlpe , providing and fixing 75mm dia gi pipe b class , itc of above items of scctv management system at nitb entrance

CTN :43125793

20 Dec, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of ug fol 20 kl with covered shed c c -cement bag 43 grade opc in polythene bags weighing 50 kgs , sand coarse confirming to , crushed stone aggregate 20mm graded , crushed stone aggregate 40mm graded , hard core of broken stone aggregate of size 45 to 63 mm , tmt steel bar 12mm dia , binding wire 20 gauge 0 point 9 mm annealed , pre cast pcc block type c1 , pan motor tasala 18 inch dia , showel with wooden handle , wire mess for seving sand 8feet x 5feet , trowels as per isi mark , water level pipe 4mm 15 mtr long , plum bob steel , nylon mason thread 100 mtr long , measuring tape 05 mtr retractable grade ai 16 , gum boot , hand gloves rubber , drilling machine portabled , steel cutter circular saw , cutting blade 4 inch steel , cutting blade 14 inch steel , portable generator set 5 kva , welding rod , welding goggles , welding gloves , portable concrete pump , 10 kl underground fol storage tank , columns , trusses , purlins , roof sheet , ms plate 5 mm thick , ms angle iron , self tapping screw 4 inch , self tapping screw 3 inch , industrial fuel transfer pump , electric wire 2 point 50 sqmm , modular switch and socket combination 05 amp , lightening conductor , pvc pipe 110 mm dia , pvc flexible hose water pipe 20 mm dia , gi elbow 20 mm , gi gate valve connector , gi socket 20 mm with thread , gi union 20 mm , fire extinguisher

CTN :43116244

24 Dec, 2025 NA

Jamnagar - Gujarat

Tender For supply of procurement of new tools and plants br items for fy 2025 26 under ge i navy jamnagar d d - aluminium ladder , circular saw , impact hammer drill machine , hammer drill machine , angle grinder , tools bag , electric planner , digital analogue measuring , leaser distance meter , hacksaw frame , cutting plier , sledge stone breaker hammer , cold chisel octagonal , water pump plier , screw drivers , box wrench , magnetic spirit level with aluminium body , measuring tape , concrete drill bit

Central Government/Public Sector

CTN :43111326

30 Dec, 2025 NA

Bangalore - Karnataka

Tender For tender for supply of supply and installation commissiong d d -supply installation testing and commissioning of 2tr 24000 btu per hour minimum bee 3 star rated confirming to is 1392 part 2 2018 inverter type cassette split ceiling mount air conditioner having wireless remote controller led display for indoor unit motorized vertical horizontal swing controls air filters uto restart with memory features inbuilt drain pump rotary scroll hermetically sealed compressor and initial charge of eco friendly refrigerant condensor and evaporator coils of copper material suitable for operation on 230v 10 single phase 50hz ac power supply the indoor unit shall be suspended from the ceiling using threaded rods including clamps bolts nuts etc and the outdoor unit shall be mounted on floor complete as required , supply and laying of soft drawn copper refrigerant pipe of suitable size for 2tr air conditioners for interconnection of suction and liquid lines between indoor and outdoor unit with tubular thermal foam insulation including necessary brazing jointing etc as required for cassette split air conditioner as required for item no 1 , supply laying of 4c x 25 sqmm frls pvc insulated 1 1 kv grade pvc sheathed multistrand flexible copper cable confirming to is 7098 pt 1 1988 along with the refrigerant lines for connecting indoor and outdoor units , supply and fixing of 25 mm dia minimum thickness of 1 2mm pvc drain pipe along with accessories and necessary clamps with an u trap at the end as required , supply and fixing of 75mm dia minimum 18mm thickness pvc covering pipe using necessary bend colloc clamps threded rod supports accessories etc for laying copper refrigernt line electrical cable and drain line as required. , supply and installation of floor mounted powder coated ms 25 x 25x5mm l angle frame including clamps bolts nuts vibrating dampers as required , drilling of hole using core cutting machine of size up to 100 mm dia in concrete stone wall ceiling for laying refrigerant lines etc and finishing the same with cement mortar after laying , dismantling shifting of old 2tr cassette split air conditioner having indoor and outdoor units associated refrigerant pipes electrical wires and drain pipes including pump down of refrigerant. , making of necessary alteration of existing gypsum false ceiling for installation of cassette air conditioner indoor units including necessary aluminium channel support gypsum board necessary accessories including painting to match for the existing false ceiling , supply installation testing and commissioning of 2tr 24000 btu per hour and iseer value five star rated and compliance with is 1391 part 2 2018 wall mounted inverter type hi wall split cooling inverter air conditioner having wireless remote controller with led display hermetically sealed scroll rotary compressor and eco friendly refrigerant initial charge of refrigerant condensor and evaporator coils of copper material air filter with auto swing auto restart features suitable for operation on 230v single phase 50hz ac power supply the indoor unit shall be fixed rigidly on wall using necessary frame the outdoor unit shall be mounted on floor laying and interconnection of standard length copper refrigerant piping as supplied by the oem between indoor and outdoor units complete in all respects as required necessary drilling of hole and finishing the same to match for the surrounding as required. , supply and laying of beyond the standard length supplied by the oem copper refrigerant pipe of size suitable for 2tr air conditioners for interconnection of suction and liquid lines between indoor and outdoor unit with tubular thermal foam insulation for hi wall split air conditioner as required for item no 1 , supply laying of 4c x 25 sqmm frls pvc insulated 1 1 kv grade pvc sheathed multistrand flexible copper cable confirming to is 7098 pt 1 1988 along with the refrigerant lines for connecting indoor and outdoor units , supply and fixing of 75mm dia minim

Work Rest Blade Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector