Latest workstation system Tenders | Government workstation system Tenders

State Government

CTN :41333626

12 Aug, 2025 2.18 Crore

Udaipur - Rajasthan

Tender For purchase of various testing major apparatus (lab equipment) in quality control labs under zone ajmer, bikaner,udaipur-i and udaipur-ii - fully automatic servo controlled compression testing machine (ctm)-3000 kn capacity with additional load frame of 500 kn capacity & flexure frame of 100 kn capacity:- supplying, fixing and commissioning of fully automatic servo controlled compression testing machine (ctm) of 3000 kn capacity which should be capable of conducting compression test on concrete & mortar specimens and allied products as per is : 516 & is :4031 (part-6). the machine should be power operated with servo controlled motor capable to apply the load continuous by without shock and there shall be large enough space provided for test specimen to accommodate in a readable position. machine shall have good load control and capable of applying the load at the specified rate, uniformly with automatic control with percentage of error for load shall not exceed + 1.0% of the indicated load. the system shall have an arrangement for automatic placing system, which achieved by the combination of advance hydraulic and electronic system. the systems can be loaded in load, displacement or strain control basis. complete machine unit shall conform to is: 14858-2000 and is: 9399-1979 and as per direction of engineer in charge. the salient features and technical specification of the machine shall be as under :- i) ctm-3000 kn machine loading frame - four column high stiffness welded from with enough stabiility . - heavy duty mechanical platens with spherical seated block (vicker hardness > 550), bottom bearing, blocks, auxiliary plates (vh > 550) shall have flatness tolerance within 0.03 mm and squareness and parallelism tolerance within 0.06 mm wide.- base shall have fine finished servo controlled hydraulic cylinder with hardened and finest abraded piston. - frame with safety guard door and transparent fragment guard (both front & rear) (ii) hydraulic pumping system, it should be compact in design and suitable for the supply of required flow and pressure for the movement of the actuactor. it shall have oil tank of adequate capcity vane type pump powered by three phase motor. anti vibration mounting shall provided as standard along with the hps.iii) micro-processed (plc & hmi) based touch panel display & control system user friendly interface control system with application software shall provide the digital servo control, precise operation, ramp generation for the machine, data acquisition, storage, processing, analyzing and reporting etc for the continuous operation of the system.iv) technical specification of ctm (3000 kn) capacity -3000 kn, platen size 320 mm dia, ram dia 260 mm, ram travel 50 mm, vertical daylight clearance 350 mm, horizontal daylight clearance 370 mm, least count - 0.1 kn, pace rate controlling -1%, rate of loading 1.3 mm/min (when running idle), 0.14 to 032 mpa/sec (with specimen), motor capacity 3 hp (min), power supply (240v, 50-60hg, three phase.), capacity of oil tank 20 litre, max. operating pressure 210- 600 bars, flow of pump 2 & 4 lpm (duel speed) , auto stop & release of pressure when specimen failure, multi operation compression test up to 3000kn, up to 500 kn range and flexure test, accessories spacers- 4nos, controller unit auto pid operation with closed loop update rate of 10 khz to control pace rate automatically as programmed. start, stop & hold test system, load control 01kn/sec to 50 kn/sec., displacement control 0.01 mm/sec to 1mm/sec. load indication & control coloured touch screen display of suitable size, test report facility to print test report, export data to ms excel. auto internal calibration without proving ring, short circling protection overload safety cut off, piston over travel safety cut off- shall be made in addition to 3 kva 3 ph servo control stabilizer, technical specification of ctm (500 kn) load frame- capacity 500 kn, platen size 256 mm,

Central Government And Public Sector

CTN :39616341

25 Aug, 2025 2.10 Crore

Jhajjar - Haryana

Tender For corrigendum : supply, installation, testing and commissioning of high end anesthesia workstation system with ot monitor

State Government

CTN :41203943

13 Aug, 2025 212

Mandya - Karnataka

Tender For for supply of lab equipments and materials to srishti tinkering lab in 04 and subject to condtion as per the tender documents karnataka public schools functioning under samagra shikshana karnataka in mandya district - jewellary making kit, paper cups, paper straws, cardboard sheets, plastic straws, paper dishes, icecream sticks, crayons, water colors, canvas, bamboo skewers, sketch pens, desktop computer with 15-20 mins back-up ups, led 43 screen with keyboard with hdmi, computer tables, working tables, chairs, electrical work, posters, painting, wall mounted fans/ceiling fans, internet, cdma routers, dongles, storage system- almirah with glass door, storage boxes, sectioned boxes, display shelves for projects, usb to dc jack cable, first-aid kit, fire extinguisher (handy units), safety goggles (with/ without led torch), safety gloves pairs, safety mask, pin cushion and pins, sewing box, trimming scissors, seam ripper, pinking shears, sewing and embroidery scissors, thread, needles, crochet needles, wool bundle, colored craft papers, origami papers, art and craft scissor, paper tape/masking tape, fevicol bottles, double sided tape, acrylic color, coloring brush, color pallete, wood glue 500 ml dpi,., pliers, 4.5-inch size1, pliers, 4.5-inch size2, pliers, 4.5-inch size3, pliers, 4.5-inch size4, pliers, 4.5-inch size5, pliers, 4.5-inch size6, pliers, 4.5-inch size7, stainless steel rule, mechanical + digital vernier calliper, spirit level, digital pen electric tester, digital multi meter, syringe- 10 ml, syringe- 20ml, leveling pipe- 8 mm, glue sticks, nuts and bolts and screw , small cable tie pack -pack of 100, medium cable tie pack -pack of 100, big cable tie pack - pack of 100, sand paper, power strip adaptors, bulb holders1, bulb holders2, mini hacksaw blades, pliers, 4.5-inch size, ball pein hammer, steel shaft claw hammer, c-clamp, allen key set, drill machine set, cordless drill machine set, spanner set, removable bench vice, precision screw driver set, wrench, wire strippers, screwdriver, drill bit set, file set, mini file set, flexible cutting mat, pegboard, hot glue gun, soldering kit, adapter with 5v, 2a, adapter with 12v, 2a, soldering helping hand, return measuring tape, copper tape- 5mm/10mm wide, bo motor wheels, insulating tape, education 3d printer kit and tools, filament for 3d printer - 1000 g each, cardboard, foam core boards, education 20m spool of thick strings various colour, rubber band, popsicle sticks, hacksaw frame, hacksaw blades, mini hacksaw frame, rfid reader tags,., dc motor1,., servo motors1, servo motors2, servo motors3, education 150 rpm bo motor, l298p motor driver, servo motor tester, robotics diy kit, drone kit, solar panels- 6v, 100mah, solar panels- 12v 10w, mq-8 hydrogen gas sensor, mq-135 air quality sensor, ir transmitter/ receiver, ultrasonic sensor module hc-sr-04 or compatible, triple axis accelerometer, pir motion detector module, pulse rate heart sensor, relay module - 5v 10a - 2 channel relay module. compatible with arduino, relay module - 5v 10a - 1 channel relay module. compatible with arduino, big sound microphone module, soil moisture sensor module, touch sensor, metal touch sensor module, rain drop sensor, flex sensor, temperature sensor, temperature and humidity sensor module, force pressure sensor, colour recognition sensor, water flow sensor, sound sensor, power bank, rf modules tx and rx 315 mhz ask, stepper motor with driver board, servo motors, battery clips with dc jack, hook-up wires, jumper cable male-male, jumper cable male-female, jumper cable female-female, rgb leds, leds (red), leds (green), leds (blue), leds (yellow), leds (white), timer ic - lm 555, diodes and transistors kit, button switch set (set of 100 pieces ), capacitative touch module, capacitative touch switch module, ir sensors, obstacle avoider sensor module, triple axis magnetometer, humidity sensor, mq - 2 smoke detection, mq-3 alcohol - ethanol sensor, mq-4 methane natural gas, mq-5 methane liqui

State Government

CTN :40985778

11 Aug, 2025 1.80 Crore

Mohali - Punjab

Tender For corrigendum : purchase of sports physiotherpy lab equipments - focused shockwave therapy the device should be suitable for musculoskeletal use. should be a focused shockwave based on piezo mechanism. should have multi array type piezo electric hand piece. should have accuracy of the shock wave generation cycle(frequency)0~8 10% should have software-based operating system the unit should have large color touch screen for ease of operation. the unit should have accuracy of the operating frequency 0~7000shock 10% the unit should have maximum energy density 0.702 m j/ (when setting at 23 levels) 15% should have shock wave penetration depth 40 20%. should have maximum focus size. 78 1.78 15.81 20% should have maximum pressure 44.01 0.65 mpa the unit should be supplied with piezo hand piece and elastomer gel padas of 8 different sizes, 5mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, and 44mm. the life span of hand piece should be of up to 10 million shocks. should be supplied with trolley with castor wheels. dimension of the device should be approximated 500mmx700mmx 1000mm should have ce or usfda certified., high laser therapy should be class iv high level laser therapy system should have a real-time operating system technology should have maximum laser should be class iv high level laser therapy system should have a real-time operating system technology should have maximum laser power output of 15 watts should have wavelengths of 810 nm & 980 nm should have an aiming beam of 650nm, should have 2 operating modes: continuous wave or pulsed applicate and piece should have embedded finger switch and light, should have a technology to customize patient treatment based on conditions, body area, body type, skin type, chronicity and absorption characteristics applicator should have a fused silica composition massage ball at the point of contact of applicator and skin. pulse frequency: 2, 10, 20, 100, 200, 500, 1000, 2500, 5000 & 10000hz pulse duration: 50% duty cycle at any given pulse frequency setting, should have a 10 hd display touch screen with password protection to reach the home screen should be supplied with 2nos. of laser protection glasses power: 100-240v, 50-60 hz the unit should be supplied with 5 different types and sizes of treatment heads (large cone, large massage ball, flat window, small massage ball, and small cone. the unit should have inbuilt battery. electrical safety class: class i, type b weight should not exceed 4 kilograms (main unit; without applicators & accessories. must have class iii also., combination therapy machine with vaccum should have 3 independent electrotherapy channels, one ultrasound channel should provide multiple clinical waveforms including interferential (2 and 4 poles and isoplanarvector), tens (asymmetric biphasic &symmetric biphasic), han, russian, vms, surged(rectangular &triangular), hvpc, microcurrent, galvanic (continuous, interrupted and low level),rabert & dia dynamic cpid/cpiso should have independent parameter adjustments for each channel including intensity, frequency, duty cycle, vector scan, channel mode, phase duration, ramp, cycle time and treatment time based on waveform should have maximum output intensity up to 140ma should have constant current and constant voltage modes should have 2 colour coded lead wires for easy picking of selected channels should have suggested electrode placement guidelines ultrasound should offer 1 and 3 mhz frequencies should have the ultrasound bnr of 5:1 or lesser should be supplied with one 5cm applicator head should have pulsed & continuous frequency modes (10%, 20%, 50% & 100%) should have variable duty cycles of 16 hz, 48 hz &1 bb 00 hz should have facility to indicate applicator uncoupling should be able to use electrotherapy and ultrasound independently and also in synchronizedcombination of electrotherapy and ultrasound, where ultrasound head functioning as bothultrasound head and electrode should have minimum

State Government

CTN :40985784

11 Aug, 2025 2.50 Crore

Mohali - Punjab

Tender For corrigendum : purchase of recovery and rejuvenation lab. - infrared sauna tower irradiance: 55-110 mw/cm2, providing therapeutic benefits rated power: 100-240v ac, 2 amp, 50-60hz, suitable for standard electrical outlets wattage: 350w, combining red light and near-infrared therapy wavelength: 650nm (red light) and 850nm (near-infrared), promoting healing and relaxation led arrays: 70 red light leds (650nm) and 70 near-infrared leds (850nm), ensuring optimal coverage variable optics: 7 60-degree optics for maximum impact and quicker results. emf emissions: no detectable emf emissions at 10-15cm, prioritizing user safety. infrared sauna units with below mentioned features to be preferred- heaters: full spectrum heaters (400w each) or carbon fiber heaters (up to 2160w total power) temperature control: digital temperature and time control for customizable sessions materials: canadian hemlock wood or western red cedar, known for durability and hypoallergenic properties additional features: bluetooth connectivity, chromotherapy lights, and built-in stereo speakers for an enhanced experience. energy efficiency: reduced electricity consumption for cost-effective use temperature range: operating temperatures between 115 f and 140 f for comfortable sessions safety features: person-specific designs and low emf emissions for safe use, cryotherapy chamberwhole body cryo therapy chamber that runs completely on electricity without need of liquidnitrogen low temperatures within the range: -130 to -140 degree celsius. multiple treatment options electric mechanical lift system ensures user s head is outside the chamber to prevent exposure to cryogenic temperatures. real-time skin temperature monitoring using ir tech sensors ensuring safe and controlledcooling. smart software that manages the treatment processes throughout each session. simple quick plug-and-play set up without requiring specialized ventilation. large uhd touchscreen for easy operation and control. at least 3 media monitors for displaying media content. hifi speakers for audio entertainment and ambient audio. work on normal indian 220v at 16a or less, whole-body pneumatic lymphatic drainage machine:key features- multi-chamber design: multiple chambers that inflate and deflate in sequence to mimic manual lymphatic drainage- adjustable pressure: adjustable pressure settings to accommodate different patient needs and comfort levels- programmable treatment: programmable treatment protocols for customized therapy sessions- user-friendly interface: intuitive interface for easy operation and programming- input voltage: ac110v/220v- power consumption: less than 400w- screen: 8-inch wide color touch screen- air pressure: 20-360 mmhg (max pressure 37.5kpa)- cooling device output temperature: 5 to -16 c- output vacuum pressure: 0-110kpa- default time: 0-60 minutes- fuse size: f3al250v- ambient temperature: 5 c to 42 c- number of air bags: 24 bags or 16 pairs atleast - treatment modes: 4 modes atleast - intensity levels: 3 levels- package size: 62x42x31cm approx - gross weight: 15 kg approxsafety features- automatic pressure adjustment: automatic pressure adjustment to prevent excessive pressure and ensure patient comfort- emergency stop: emergency stop feature to quickly deflate chambers in case of discomfort or distress- patient monitoring: optional patient monitoring capabilities to track vital signs and treatment responseadditional features- multiple treatment modes: multiple treatment modes for different conditions, such as lymphedema, edema, and post-surgical swelling- data logging: optional data logging capabilities to track treatment parameters and patient progress- portability: optional portable design for increased flexibility and convenience.certifications: ce or fda clearance, percussion massager (gun massager)key features- percussive action: a percussive action that provides rapid and repetitive strokes to muscles and tissues- adjustable speed: adjustable speed settings to cust

State Government

CTN :40985787

11 Aug, 2025 63.00 Lacs

Mohali - Punjab

Tender For corrigendum : purchase of biochemistry lab equipments - fully automatic biochemistry analyzerthroughput: 200 photometric tests/hour & 400 tests/hour with ise (optional)reagent positions: 50 cooled reagent positionssample type: whole blood, serum, plasma, urine, csf otherreading volume: 180 lsample volume: 2-70 l (adjustable in 0.1 l)reagent volume: 10-300 l (adjustable in 1 l)light source: halogen lampon board laundry: 6 stage cleaning, 2 stage drying with cuvette validation stepcalibration type: linear, non-linear, multipointprogrammable parameters: default system pack parameters + upto 10 user defined parametersdimensions and weight: ergonomic design and light weight., fully automatic hematology analyzerthroughput-up to 80 samples per hourdimensions and weight ergonomic design and light weighttest mode-cbc, cbc+diffdata storage capacity-up to 100 000 resultscommunication-lan port supports hl7 protocolpower requirement-a.c. 100-240 v, less than or equal to 300 va, 50/60 hzoperating temperature-15 to 30 degree celsiusoperating humidity-30-85%air pressure70-106 kpa, fully automatic immunoassay analyser random assay (hormone analyser)instrument name: immunoassay analyserusage/application-clinicalplate format-random assaydetection method-luminescenceparameters-blood alcohol contentautomation-fully automaticuser input-touchassays-diabetes, thyroid, cardiac, vit d, fully automatic electrolyte analyser-analysis time: 60 second per sample parameters- na , k , cl or ca2+no. of parameters 3 simultaneously90 luser inputs 5 colored touch screen displayelectrode type- sturdy electrode (facility to refill the solution)connectivity 2 usb port, rs232, lisdata storage- 10,000 patient results & 10,000 qc results for 3 levelssample identification- alphanumeric sample idqc management- tri-level quality control, l j plots of last 30 dayscalibration- 2 point calibration on every 4 hours1 point with every samplepower - 100 240 v, 50/60 hz (self adjusting)printer - inbuilt thermal printerroom temperature -15 30 c / 60 90 fhumidity- 85%dimensions and weight - ergonomic design and light weight, centrifuge machine along with 500 prp test tubes (double spin)parameter- neya-16 max speed (rpm)- 15000max rcf (g)- 21000max capacity (ml)- 4 x 175acceleration profiles- 10deceleration profiles- 10display-- multi-color lcdno of programmes- 10 (protected)timer- 30 sec to 99 min & continuous modeergonomic design and light weightsupply - 220v, 50 hz, 1 phasecan be used for extracting prp, autoclavekey features- high-pressure vessel: a high-pressure vessel designed to withstand high temperatures and pressures- temperature control: precise temperature control to ensure effective sterilization- timer and controls: easy-to-use timer and controls for convenient operation- safety features: multiple safety features, such as automatic shut-off and overheat protection, to prevent accidents and ensure safe operationconstruction and materials- stainless steel: a durable stainless steel construction to withstand high temperatures and pressures- insulation: high-quality insulation to ensure efficient heat retention and energy savings- door and seals: a secure door and seal system to prevent steam escape and ensure effective sterilizationperformance specifications- temperature range: 121 c to 134 c.- pressure range: upto 30 psi- cycle time: 15-60 minutes- sterilization capacity in liters or cubic feetsafety standards- compliance with regulations: compliance with relevant regulations, such as asme, fda, and iso standards- automatic safety devices: automatic safety devices, such as overheat protection and low-water cut off, to prevent accidents and ensure safe operation- interlocks: interlocks to prevent door opening during operation and ensure user safetyadditional features- data logging: optional data logging capabilities to track temperature, pressure, and cycle data- printed records: optional printed records of cycle data for documentation and quality control- val

Central Government/Public Sector

CTN :41127426

09 Aug, 2025 26.92 Lacs

Pune - Maharashtra

Tender For supply of musical instruments and sound equipments - electric guitar fender sss , amp katana 50-watt 12 inch , boss gt1 pedal , bass guitar and 40 watt bass amp , nord stage 4 88 keys , mridangam , fender semi acoustic guitar , electric drums roland 07dmk , tabla , dholak , harmonium , shure sm 58 mics , jbl eon 208p speaker , behringer wing 48 channel digital mixer console with 10 inch touch screen , neutrik microphone xlr fm cable 3 mtr , 1or 4 th trs jack cable 3 mtr , usb c 6 in 1 hub adapter with 60w power delivery , magic keyboard with touch id and numeric keypad , magic mouse usb-c black multi touch surface , universal audio apollo x8p thunderbolt 3 audio interface , konig and meyer spider pro double stand for keyboard , fender electric guitar deluxe molded case electric guitar case , baritone case for boss gt10 gig bag padded bag 23x13x4 , fender fa405 dreadnought acoustic guitar gigbag , beyerdynamic dt 770 pro 250 ohms closed back studio headphone , gator rok it collapsible 7 space guitar rack stand , bss ar 133 active di box line balancer , behringer ha8000 v2 8 channel high power headphones mixing ) /bid number : gem/2025/b/6470260 * /dated: 18-07-2025 & & / bid document 1 / 25

Workstation System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

State Government

State Government

State Government

State Government

Central Government/Public Sector