Latest worm gear Tenders | Government worm gear Tenders

State Government

CTN :45738705

21 Jul, 2026 NA

Ukai - Gujarat

Tender For supply of gland pecking for wb , element gasket for wb , warm gear 30 teeth for wb , warm shaft wb , spur gear 12 teeth for wb , rack pinion for wb , warm stl 03 for wb , warm lh stl 02 for wb , spur gear shaft for wb , secondary shaft for wb , primary shaft for wb , primary gear for wb , worm gear for wb , worm gear l.h. for wb , spur gear for wb , key for wb , oil seal for wb - 1e for wb , motor gasket for wb , cover gasket for wb , gasket for wb , oil seal for wb , element gear for wb , chain connector of traveling chain carriage assy , oil gun removal part j for oil gun type , spary plate.90j28 for oil gun type , copper clad asbest gasket , set of gear and pinion assembly for gc feeder inlet gate * /bid number : gem/2026/b/7644559 + /dated: 30-06-2026 ' ' / bid document 1 / 29

corporations/Associations/Others

CTN :45737996

10 Jul, 2026 5.73 Lacs

Bardhaman - West Bengal

Tender For supply of iwg 1002 sa 100e 125 , limit switch drive assembly , torque switch drive assembly , top bevel gear box , worm gear , clutch fork assy , warm shaft assy , red gear assembly , hollow drive shaft assembly , o ring set , ball bearing , oil seal set , hand wheel retainer , worm gear spares , spur gear spares , clutch fork assembly , circlip set , ball bearing spares for actuators , oil seal kit spares for actuator , limit switch counter gear , push button assembly , torque switch , return spring , declutch lever for actuator typesa60a90 , declutch tripping arm , compression spring auma * /bid number : gem/2026/b/7725109 + /dated: 30-06-2026 ' ' / bid document 1 / 28

CTN :45620241

03 Jul, 2026 NA

Sundergarh - Odisha

Tender For corrigendum : sdtork: worm gearbox code: sp-fwg72-e

CTN :45723339

08 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - condemned emu motor coach no. 112373, emu motor coach complete along with bogie (bogie-1 2022/1999, bogie-2 1961/1998), traction motor, transformer, tap changer, rectifier, brake cylinder and all available unserviceable fittings except excluded items. qty- 01 no. list of excluded items: wheel sets & axle boxes complete (with roller bearing, bull gear, axle box cover and all other fittings) and bronze wearing piece. axle box- 08 nos, wheel set-04 sets, axle box cover- 08 nos & bronze wearing piece- 04 nos. excluded items as mentioned above are to be returned to the custodian by the purchaser during return over programme. total weight particulars (approx.) consist of ferrous- 34.235 mt (approx.) [which include 0.06 kg steel], insulated copper- 1.937 mt (approx.), pure copper- 0.920 mt (approx.), al- 0.191 mt (approx.), brass- 0.120 mt (approx.), bronze- 0.127 mt (approx.), silver- 1.2 kg (approx.), manganese- 14.4 kg (approx.), tungsten- 0.27 kg (approx.), lead- 0.264 mt (approx.), rubber- 14.9 kg (approx.), insulators- 0.688 mt (approx.), wooden ply/hylam work etc.- 0.980 mt (approx.). overall and details weight particulars attached with this lot.

CTN :45723340

08 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - condemned emu motor coach no. 112400, emu motor coach complete along with bogie (bogie-1 1603/1996, bogie-2 1546/1996), traction motor, transformer, tap changer, rectifier, brake cylinder and all available unserviceable fittings except excluded items. qty- 01 no. list of excluded items: wheel sets & axle boxes complete (with roller bearing, bull gear, axle box cover and all other fittings) and bronze wearing piece. axle box- 08 nos, wheel set-04 sets, axle box cover- 08 nos & bronze wearing piece- 04 nos. excluded items as mentioned above are to be returned to the custodian by the purchaser during return over programme. total weight particulars (approx.) consist of ferrous- 34.235 mt (approx.) [which include 0.06 kg steel], insulated copper- 1.937 mt (approx.), pure copper- 0.920 mt (approx.), al- 0.191 mt (approx.), brass- 0.120 mt (approx.), bronze- 0.127 mt (approx.), silver- 1.2 kg (approx.), manganese- 14.4 kg (approx.), tungsten- 0.27 kg (approx.), lead- 0.264 mt (approx.), rubber- 14.9 kg (approx.), insulators- 0.688 mt (approx.), wooden ply/hylam work etc.- 0.980 mt (approx.). overall and details weight particulars attached with this lot.

CTN :45723341

08 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - condemned emu motor coach no. 008089 (11434e), emu motor coach complete along with traction motor, tap changer, rectifier, brake cylinder and all available unserviceable fittings except excluded items. qty- 01 no. list of excluded items: bogie (bogie-1, 3679/2011, bogie-2, 3608/2011), wheel sets & axle boxes complete (with roller bearing, axle box cover, bull gear and all other fittings), side bearer wearing piece, centre pivot bush bottom, centre pivot bush top, transformer, cable head termination (cht) and vacuum circuit breaker (vcb), sl-dl-tl, lightning arrester. axle box- 08 nos, wheel set-04 sets, axle box cover- 08 nos, bogie- 02 nos, side bearer wearing piece- 04 nos, centre pivot bush bottom- 02 nos, centre pivot bush top- 02 nos, transformer- 01 no, cable head termination(cht)- 01 set complete, vacuum circuit breaker(vcb)- 01 set, sl-dl-tl- 01 no, lightning arrester- 01 no. excluded items as mentioned above are to be returned to the custodian by the purchaser during the return over programme. total weight particulars (approx.) consist of ferrous- 28.815 mt (approx.) [which include 0.06 kg steel], insulated copper- 2.068 mt (approx.), pure copper- 1.031 mt (approx.), al- 0.168 mt (approx.), brass- 0.120 mt (approx.), bronze- 0.127 mt (approx.), silver- 1.2 kg (approx.), manganese- 14.4 kg (approx.), tungsten- 0.27 kg (approx.), lead- 0.264 mt (approx.), rubber- 10.4 kg (approx.), insulators- 0.603 mt (approx.), wooden ply/hylam work etc.- 0.980 mt (approx.). detailed weight particulars attached with this lot as annexure-a & b.

Central Government And Public Sector

CTN :45727576

16 Jul, 2026 NA

Bangalore - Karnataka

Tender For supply of foot mounted vertical output shaft single reduction worm gearbox fv 6 inch with a reduction ratio of 30: 1. the gearbox will have side extended solid input shaft of diameter 40mm with fan & down side extended solid output shaft of diameter 58mm. pitch of hole should be minimum 302mm & maximum of 388mm. gearbox model no fv 6 inch ratio 30:1 of make shanthi gears or equallent. [ warranty period: 18 months after the date of delivery ] ]

CTN :45710493

06 Jul, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, bobrnm1, bobrm1, bcnm1,boxnhl bvzc, bobrnel & boxnr wagons no as following: [1] scr 10099663802 boxnm1 [2] er 72029662187 bobrnm1 [3] er 72029960313 bobrm1 [4] cr 30019060122 bcnm1 [5] nwr 22111111109 boxnhl [6] scr 85099560413 bvzc [7] ser 85079560471 bvzc [8] ser 10079666892 boxnm1 [9] er 72029760012 bobrnel [10] ser 10079665581 boxnr. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (112.90 mt) is the lot quantity (112.90 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for boxnm1, bcnm1,boxnhl & boxnr : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bobrnm1, bobrm1 & bobrnel : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (iii) for bvzc wagon : wheel set with rb andaxle box, brake cylinder, distributer valve, draft gear, coupler body, yoke & yoke pin as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.

CTN :45710494

06 Jul, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, boxnr, boxnlw, bcnm1 & bobrnmi wagons no as following: [1] scr 10099523700 boxnm1 [2] scr 25099661369 boxnr [3] secr 14140762292 boxnlw [4] scr 30099186132 bcnm1 [5] ser 10079666083 boxnm1 [6] er 72029563392 bobrnm1 [7] scr 10099660689 boxnr. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (79.190 mt) is the lot quantity (79.190 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for boxnm1, boxnr, boxnlw & bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bobrnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.(iii) sl. no 04 fitted with casnub bogie 22w(m) which is to be sold with wagon.

Central Government/Public Sector

CTN :45702756

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of rolling stock - condemned bg-8 wheeler wagons- with all available fittings there on but excluding the following reclaimable items - 1) wheel set complete with axle, axle box & roller bearing assembly complete set 2)bogie assembly complete set , 3) brake gear assembly,4)dv,sab,brake cylinder, 5)draft gear,6) coupler body&yoke ,wagon nos:1)ser boxnr 25079862892, 2)cn bfkhn 98259060388, 3)nf boxnm1 10059609253, 4) sc bcnm1 30099160149 , = 4 wagons. ds8 nos. 010315-25-373534, 010315-26-91716/91723/91733 dt.05/03/2026 & 10/06/2026 . pl.no.98110159 location: behind carriage works rly station. custodian: sse /cw/per remark :1) rc items to be handed over to the custodian at specified location before final delivery.2)cutting permitted to loadable sizes only. 3) crane loading may be permitted. 4) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.d and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government 5) purchaser should take safety precaution while cutting/delivery of wagons. 6) rate per number should be quoted.

Worm Gear Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government And Public Sector

Central Government/Public Sector