Latest xlpe conductor Tenders | Government xlpe conductor Tenders

Central Government And Public Sector

CTN :45237853

09 Jun, 2026 68.47 Lacs

Chandigarh - Chandigarh

Tender For supply of supply installation testing and commissioning of 1600 kva 11 by 0.433 kv delta star step down as per atc attached , supply installation testing and commissioning of 11 kv 630a rated breaking capacity 21ka for 3sec sf6 insulated rmu as per atc attached , sitc of 2500 amps sandwich type bus trunking as per atc. , supplying and laying of 3 core 150 sqmm xlpe insulated cable on the existing cable tray or rcc or hume or metal pipe or susface as per atc attached , supplying and laying of 3 core 150 sqmm stranded aluminium conductor conductor screen with extruded semi conducting compound xlpe insulated cable in the existing masonary duct as per atc attached , supplying and makingoutdoor cable end termination with heat shrinkable joint for 3 core 150 sqmm 111 kv grdae as per atc attched. , copper plate earthing complete as per atc attached. , gi plate earthing complete as per atc attached. , providing 50 mm and 5 mm thick copper strip on surface as per atc attached. , providing 25 mm and 5 mm thick copper strip in 40 mm gi pipe as per atc attached. , providing 25 mm and 5 mm thick copper strip on surface as per atc attached. , supplying and laying of 80 mm gi pipe a-class on surface as per atc attached. , supplying and laying of 80 mm gi pipe a-class in ground as per atc attached. , supplying and laying 120 mm dia dwc hdpe pipe as per atc attached. , supply and installation of 4.5 kg co2 type fire extinguisher isi marked as per atc attached. , supply and installation of 06 kgs abs powder type fire extinguishers as per atc attached. , supply and installation of 3 mm thick rubber mat suitable for 33 kv as per atc attached. , supply and installation 0f 4 nos 9.5 ltrs capacity gi bucket as per atc attached. , supply and installation of first aid box as per atc attached. , supply and fixing safety instruction chart as per atc attached. , supply and fixing shock treatment chart as per atc attached. , supplying and fixing of 40mm x 40mm x 5mm thick angle iron frame complete as per atc attached. , supplying and fixing of single line diagram and layout diagram complete as per atc attached.

CTN :45237154

01 Jun, 2026 NA

Bathinda - Punjab

Tender For supply of chain sprocket kit , semi conductor device diode , brush gear assy , gear fly wheel ring , solenoid switch 12 v , horn change over switch , clutch cable assy , hose air filter outlet , reverse light switch , horn electrical , assy fuel pre filter , assy fuel filter

CTN :45210368

09 Jun, 2026 NA

Ranchi - Jharkhand

Tender For 3 x 400 sq. mm, 19/33 kv grade (earthed system), ht, three core power cable with improved fire performance category c2, stranded compact circular aluminium conductor complying with class 2 of is 8130, conductor screened with black extruded semi conducting compound, xlpe insulated, insulation screened with black extruded semi conducting compound in combination with copper tape, cores identification by coloured strip applied on the cores, cores laid up, innersheath of pvc applied by extrusion, galvanised round steel wires or galvanized formed wires armoured, and outer sheath of pvc applied by extrusion conforming to the requirement of type st 2 of is 5831 & also meet the requirement of c2 category tests under clause 19.1.3 & 19.2.1 , conforming to is 7098/ (part-ii) 2011 with amendment no. 1 & 2 and isi marked. (i) type test certificate conforming to is:7098 part-2 from nabl accredited lab has to be submitted along with the offer and along with the supply of material as per clause 3.2 including notes {1 and 2(a,b,c)} of is 7098 (part 2) amendment no.-2. (ii) routine test certificate as per is:7098 part-2 has to be submitted along with supply of materials.(iii) acceptance test as per is:7098 part-2 has to be conducted by inspection agency. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45182846

22 May, 2026 NA

Lucknow - Uttar Pradesh

Tender For ht cable 3x120 sqmm supply of 11 kv(e) grade ht three core power cables - with improved fire performance category c2, aluminum conductor stranded compact circular aluminum conductor, conductor screen with extruded semi conducting compound, , xlpe insulated , insulation screening with extruded semi conducting compound in combination with copper tape, cross laid up, innersheathof pvc, galvanized steel flat strip armored , and overall pvc sheathed cable conforming to is 7098 / (part-ii) -2011 with the latest amendments. 3x 120 sq.mm [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45109421

25 May, 2026 NA

Gopeshwer - Uttarakhand

Tender For replacement of 33 kv bare conductor line by aaac al-59, 160 sq.mm covered conductor at various location from himurja plant to 33 kv s/s nandanagar (ghat) against capital (si) head under edd gopeshwar on semi-turnkey basis

Co-operative

CTN :45073104

18 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of the electric miscellenious material - empire tape 1", p.v.c. tape " steel grip make, glass tape size 1", cotton tape 1", black insulation tape 1" johnson & johnson make, fiber glass sleeve 1 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 10 mm, 18 mm, film paper 7 mile/ 10 mile, nomax paper 7 mile/ 10 mile, plastic coated leatherized paper 7 mile/ 10 mile, fiber glass pipe " x 4 to 1" x 4, condensor 2.5 mfd, 3.15 mfd, 4.0 mfd, 6.0 mfd, 8.0 mfd, 10.0 mfd, 30.0 mfd, 36.0 mfd, 100.00 mfd, 120.00 mfd, exhaust fan three phase 415 volt, 50 hz isi mark, size-18", size-24", exhaust fan blade size-15", size-18", size-24", auxilary contact block 3ta61,220 volt, 4no+4nc, auxilary contact block 3ta24/28, heater rod 1000 watt 12" long, 1500 watt 12" long, petrolium jally 50gm pack, alluminium/copper crimpling lugs (dowells make/ svs make), lug punching machine upto 400 sqmm crimpling dia r4 to r14, crimpling die r-4 to r-14, phase tester taparia make, c.r.c 226, hot air blower, benzene, insulating plier 8" taparia make, thinner dr.beak l1 twenty litre pack, air dry varnish dr.beak make elmo luft 1a - 21 litre pack, becktol red/grey dr.beak - 4 kg tin, motor connection plate for bbl/ke/siemense/crompton make motor 7.5 hp, 10 hp, 15 hp, 25 hp, 40 hp, screw driver set taparia make, proximettry switch ps 18 dbpo 5-30 vdc, h.b.c./hrc fuse link 250amp. tkf 250, 660 vac, 80 kag g.e.power controls, isi mark, volt meter 144 x 144mm, 0-600v, ae make, square type volt meter, 96 x 96, 0-600v, pedistal type amp meter 0-200 ctr 200/5, 0-300 ctr 300/5, 0-400 ctr 400/5, 0-600 ctr 600/5, flash mounting digital frequency meter 94 x 94mm, 45-55hz, 144x144mm, 45-55hz, soldering rod, soldering iron, soldering flux eyre no.7, soldering wire 60% + 40%, megger upto 1000 volt (hand operated), megger upto 1000 volt (mechanical operated), bakelite sheet 1/16" x 2 x 4 to 3/8" x 2 x 4, bakelite rod 2", potentio-meter pankaj make 500 ohm 3 watt, 5k ohm 1 watt, 600 ohm 3 watt, 10k ohm 1 watt, diode 15k kitron forward, diode 15k kitron reverse, power diodes for t.g.set 321 umr 100 reverse, power diodes for t.g.set 321 umr 100 forward, diode 12 hr 40/u.s.r. 120-40 usha 40 amp. normal polarity, reverse polarity, brass holder for fibrizer 400 hp slipring motor, brass holder for cane unloader carbon brush size- 40 x 40 x 20, brass holder for cane unloader carbon brush size- 25 x 25 x 100, carbon holder spring for above holder size- 40 x 40 x 20, carbon holder spring for above holder size- 25 x 25 x 100, copper carbon brush m-15 e quality(a) with pig tail 8 x 18 x 30, 10 x 30 x 40, 16 x 32 x 42, fibrizer motor 22 x 32 x 45, cane cutter motor 20 x 40 x 50, 25 x 25 x 40, 25 x 25 x 50, 1500 kw alternator 25 x 40 x 55, (b) without pig tail (cane unloader) 25 x 40 x 40, 20 x 20 x 96/100, 25 x 25 x 100, ( c ) graphited carbon brush with double pig tail for centrifugal machine 12x32x45, 10x30x40, copper carbon brush m-15 e quality with double pig tail 25 x 32 x 50, 25 x 40 x 50, 32.5 x 32.5 x 12.5 (eg-224), copper carbon brush m-15 e quality for 1500 kw alternator rotor size 25 x 40 x 55, carbon holder for 15kw exciter jyoti make, tension spring for above, d.c.volt meter 65x65, 0-100 amp. panel mounting, push button element vaisno make 1no+1nc, rectifier 200amp + base (usha), semi conductor fuse gsg 1000/350, 600 volt ac, 350amp (bussmann make), fuse kit kat 20 amp. ee make, fuse kit kat 32 amp. sm-32 ee make, fuse kit kat 63 amp. sm-63 ee make, c.t.operated flash mounting amp meter 96x96mm 0-200amp ctr 200/5, 0-300amp ctr 300/5, 0-400amp ctr 400/5, 0-500amp ctr 500/5, 0-600amp ctr 600/5, 0-800amp ctr 800/5, 0-3000amp ctr 3000/5, but volt meter 0-600 v, current transformer ae 50/5,100/5,200/5,400/5,600/5, plastic cooling fan for ke/bbl/ngef make motor 3hp, 5hp, 7.5hp, 10hp, 15hp, 20hp, 25hp, 30 hp, 40hp, 50hp, flush type synchronius timer 2 delay 5-120sec. em 1000 gec, crane duty motor sq cage duty s-4 (crompton/gec/bbl/siemense make) all size/type, squarrel cage induction motor (c

Central Government / Public Sector

CTN :45120830

27 May, 2026 NA

Hyderabad-T - Telangana

Tender For supply of semi conductor fast acting fuse, rating 1000/1250 volts, 1450 amps for bg ac emu main rectifier unitconfirming to specification icf/elec/021 rev [ warranty period: 30 months after the date of delivery ]

CTN :45151545

26 May, 2026 NA

Bathinda - Punjab

Tender For supply of field coil assy 24 v , tie rod , oil filter assy , armature 12 v , semi conductor device diode , belt v ribbed , slave cylinder , steering mtg combi switch , hose radiator outlet , solenoid switch 12 v , solenoid , assy cable complete , hose air filter outlet , sleeve cyl assy

Central Government/Public Sector

CTN :45120909

14 May, 2026 NA

Hubli - Karnataka

Tender For htug 11 kv, 3 core, 120 sq mm, stranded aluminium conductor, screened, xlpe insulated, insulation screening with extruded semi conducting compound in combination with copper tape, inner sheath of pvc tape, galvanised flat steel strip armoured and overall pvc sheathed cable conforming to is 7098 / (part-ii) 1985 with latest amendments. detailed spec as per enlclosed. test report from central government/nabl/ilac accredited lab and bis certificate should be submitted along with the supply. make: havells, polycab, kei, finolex, sbee or similar [ warranty period: 30 months after the date of delivery ]

CTN :44997840

07 May, 2026 8.50 Lacs

Jajpur - Odisha

Tender For corrigendum : supply of 11 mtr long 150 x150 gi pole , 11 kv pin insulator , 11 kv hw fitting 45 kn , 11 kv v cross arm , 11 kv disc insulator 45 kn polymer , 11 kv 1 core 100 sqmm xlpe conductor , 100x50x6 gi ms chanel , 75x40x6 gi ms chanel , 50x50x6 gi ms angle , pg clamp for 100 smm2 conductor , lightning arrester 12 kv,10ka , road crossing guarding , 3.5 c x 95 smm xlpe insulated , 63 kva transformer , lt db box with mccb and kitkat fuse 63 kva , ab switch 11 kv,200 a 3 pole,50hz , h.g fuse 11 kv,200 a 3 pole with pl , gi pipe earthing 3 mtr long , hdpe pipe 8 inch 10 mtr , 25 x 6 mm gi flat , 50 x6 gi flat , earthing material , earthing of support , danger plate , anti climbing device of gi barbed wire , gi nut,bolt and washer of , all cable lugs , 10 core 2.5 sqmm cu control cable armoured , fish plate , ht stay set complete , ht stay insulator , 7 per 10 swg stay wire 10kg per stay , ht stay clamp , black yellow paint

Xlpe Conductor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

State Government

Co-operative

Central Government / Public Sector

Central Government/Public Sector