Get complete information related to latest Xlpe Insulation Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Xlpe Insulation Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Xlpe Insulation Tenders.
Tender For item type: supply of digital multifunction insulation tester having function of fault loop & lineimpedance measurement range 10 ohm/20 ohm/200 ohm/2000 ohm & resolution .001 ohm/0.01 ohm/0.1 ohm/1 ohm, with rcd testing non trip feature prospective earth fault current, psc test (short circuit measurement) range 1000a/10ka (50ka) resolution 1a/0.1ka. ac voltage measurement range 500v & resolution .iv insulation resistance measurement (riso) test voltage 50 - 100 - 250 - 500 - 1000 v, accuracy of test voltage (at rated test current + 10% - 0%), test voltage range 50v - 1000 v, insulation resistance range - 20m ohm/50m ohm/100m ohm/200m ohm/1000m ohm & resolution .01m ohm/0.m ohm/1m ohm, input impedance- 360 k ohm, over load protection- 660 v ohm ms, test current i ma ( 50 k ohm, 100 k ohm, 250 k ohm, 500 k ohm, 1 m ohm, continuity testing (rlo) range (auto ranging) 20 ohm/200 ohm/2000 ohm, open circuitvoltage >4v, earth resistance measurement 2 pole & 3 pole with accessories, rcd testing for type ac, ab, & programmable rcd bluetooth connectivity, internal memory for test data storage, rechargeable battery 6xaal (iel lr6) c 1600 hard carrying case, zero adapter, heavy duty mains cord, standard test lead set, padded carrying & waist strap, tp 165x remote control probes [ warranty period: 30 months after the dateof delivery ] ]
Tender For supply of kapton covered copper conductor, dimension of bare copper 1.4 plus/minus 0.03 mm x 5.5 plus/minus 0.04 mm and corner radius 0.6 plus/minus 0.1 mm. dimension over 51 to 55%. insulation 1.595 x 5.705 mm max. as per clw spec. no. - 4tms.095.002 (rev.- 0) of dated 23.06.2011 for equalizer coil of hitachi tr. motor armature. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of electrical item - led batten light (led tube light) (v2) (q2) , self ballasted led lamps (led bulb) (v3) conforming to is 16102 (part 2) (under bis scheme - ii) (q2) , led luminaire for floodlight conforming to is 10322 (part 5/section 5) (v3) (under bis scheme - ii) (q2) , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , led garden light (v2) (q2) , non modular piano type domestic electrical sockets isi marked to is 1293 (q2) , non modular piano type domestic electrical switches isi marked to is 3854 (q2) , cable pvc insulated copper conductor single core 1.5 sqmm , cable pvc insulated copper conductor single core 10.0 sq mm , cable pvc insulated copper conductor single core 2.5 sqmm , cable pvc insulated copper conductor single core 4.0 sqmm , cable pvc insulated copper conductor single core 6.0 sq mm , cable pvc insulated copper conductor twin core 2.5 sqmm , capacitor 2.5 mfd , capacitor 4.0 mfd , electrical bulb holder batten or angle , electrical fan regulator electronic type or switch type or step type , electrical plug and socket assembly with plastic cover for ac 20 or 25 amp , electrical plug top three pin 05 or 06 amp , electrical plug top three pin 15 or 16 amp , electrical switch socket combination piano type 15 or 16 amp , electrical switch socket combination with box 15 or 16 amp , electrical switch socket conobination piano type 05 or 06 amp , electrical switch socket conobination with box 05 or 06 amp , led batten 18 watt complete fitting , led batten rechargeable 20 watt complete fitting , led bulb rechargeable 12 watt , led bulb rechargeable 6 or 7 watt , led bulb rechargeable 9 watt , led street light fitting 50 watt , mcb 100 amp tpn , mcb distribution board 10 way , mcb distribution board 12 way , mcb distribution board 4 way , mcb distribution board 6 way , mcb distribution board 8 way , mccb 100 amp 4p 25ka , modular socket 5 amp , modular socket 6a and 16 amp , modular switch 15 amp , modular switch 5 amp , modular type regulator 1mod , pvc insulation tape 20mm 10 mtr long , pvc insulation tape 25 mm 25 mtr long , pvc xlpe cable aluminium conductor 10 sqmm 2 core armoured extruded pvc type , pvc xlpe cable aluminium conductor 10 sqmm 4 core armoured extruded pvc type , pvc xlpe cable aluminium conductor 16 sqmm 4 core armoured extruded pvc type , pvc xlpe cable aluminium conductor 25 sqmm 4 core armoured extruded pvc type , pvc xlpe cable aluminium conductor 35 sqmm 3.5 core armoured extruded pvc type sheathed 1100 v grade as per is , pvc xlpe cable aluminium conductor 6 sqmm 2 core armoured extruded pvc type , electric geyser 25 ltr capacity with five star rating of 1.5 kw
Tender For auction sale of depot ferrous scrap - scrap ferrous components consisting of scrap ferrous all ferrous item pinion 15,16 & 21 teeth, racer nu2236, racer nj 320, set of laby outer grease cover de, set of laby outer grease cover nde & de, set of labyrinth de stopper, set of laby nde stopper, housing speed probe & de side side inner cover for 3 phase, nde side inner cover for 3 phase, end frame de side, nj ring, brush pressure setting machine & miscellneous nut bolt & pocket cover, de cap labyrinth deflector, de side stopper, nde side stopper, speed sensorcover nde, locking plate for 3 phase tm rocket ring fork & bearing cover for hitachi. nj ring for three phase, set of arcing horn & fixing bracket & nde side inner cover for 3 phase, inner racer nu2236, inner racer n320, nj ring for hitachi tm & inner bearing cover stoper for hitachi tm & inner bearing cover for hitachi tm ce side, equiliser beam short & long of wag-5, servomoter, plunger for pantograph, end shield (mvmt) nde & de, mcp grease plate, mcp end shield (de & nde), arno grease plate, mvmt grease plate, mcp grease plate, cooling fan mcp, free end cover, lp cylinder, hp cylinder, crank for compressor & other released item from ac loco (insulation= 41.61 kg approx). weight= 25.972 mts. for custodian information ss-11 no. nkj/trs/scf/26-27/5 dt. 01.06.2026. ds-8 note no. 020720 dt. 01.06.2026. mode of delivery by actual weight only. (remark- 1. sale condition "as is where is basis" & uniform sale condition for e-auction is applicable. 2. the purchaser of the awarded lot are advised not to wait for last date of fdp considering the forthcoming mansoon season. all efforts should be made to lift the lot as early as possible.)
Tender For providing of certain items for the sports arena in serilingampally circle-49, slp zone cmc - supply, fabrication, and fixing of prefabricated container-type of size 4.2mx 2.4m x 2.4m height, including complete with all required civil works including foundation, electrical, and plumbing works. the unit shall be made with a structural steel frame using is-standard square/rectangular tubes, externally cladded with 1-1.2 mm corrugated gl sheets with anti-corrosive paint, and internally lined with 8-12 mm cement board/laminated board panels including thermal insulation. the flooring shall consist of 18mm waterproof board with vinyl/ceramic tile finish complete for finished item of work as directed by the engineer-in-charge. installation including cost and conveyance of all materials and all labour charges, fixing charges, transportation etc. , supply and fixing of hexagonal frp ornamental gazebo with bench-outer dimension 18 feet 3-inch ms box pipe structure supported columns and clod with frp ms rafter, seating bench and railing cladding for columns and roof made up of frp. the item is finished with aspa colour and polish including transportation etc., complete , providing, supplying and laying 80 mm thick heavy duty aracon flooring blocks/pavers of approved colour, design and pattern over prepared surface including laying in proper line, level and slope, with 20-25 mm thick bedding sand layer, cutting to edges, filling joints with fine sand, compaction with plate compactor, watering, cleaning and finishing.complete as directed by engineer-in-charge.
Tender For maint of road side lighting works and miscellaneous electrical items under ge n akhnoor. - labour for cutting/pruning of tree branches along security light pole around 2 mtr radius of security light fitting and removing from site including arrangement of t&p (i.e. axe, rope & ladder etc.) complete all as specified and directed., dismantling and taking down street light fittings/post top lantern/down lighter of any wattage/size for repair or replacement of burnt/worn out accessories or carrying to mes store and refixing after repair on required location complete all as directed.note: accessories or components needed for replacement shall be measured and paid separately under appropriate items., repairing of unserviceable led street light any make/model of 90 100 watt capacity by replacing compact led electronic driver suitable to operate on 120 to 270 volt, 50/60 hz ac supply, protection grade ip-66 with surge protection complete all as specified and directed., repairing of unserviceable led street light any make/model of 60 72 watt capacity by replacing compact led electronic driver suitable to operate on 120 to 270 volt, 50/60 hz ac supply, protection grade ip-66 with surge protection complete all as specified and directed., pvc conduit medium grade of size 15 mm bore including fittings, isi marked, fixing with pcc pole/steel tubular pole/garden lights/gate lights for wiring connection from pole box to light fitting and supporting with 03 nos gi strip clamp, nut & bolt, complete all as specified and directed., replacement of pvc insulated pvc sheathed stranded copper conductor cable 2.5 sqmm twin core complete all as specified and directed., pvc insulation tape of width 18 mm, thickness 0.125 mm, length 25 mtr, isi marked, for proper insulation of joints in wire where required or directed., replacement of aluminium pvc service wire 2 core 6 sqmm flat roll of 90 mtr, superior quality, complete all as specified and directed., disconnecting & dismantling of damaged/unserviceable cable of any type/make and supply & laying in repair/replacement of cable xlpe insulated, screened pvc bedded, galvanized steel strip or wire armoured electric power cables (heavy duty), 1100 volts grade with stranded aluminium conductor using lugs/ferrules at both ends of cable and testing complete all as directed for following sizes:, 10 sqmm 4 crore, 16 sqmm 4 crore, 25 sqmm 3.5 crore, 35 sqmm 3.5 crore, note for item no. 17 & 18: excavation & earth work, sand cushioning, bricks protection & gi pipe where required shall be measured and paid separately., excavation in trenches not exceeding 1.5 mtr width and not exceeding 1.5 mtr depth, getting out for electric cable complete in any type of soil complete all as specified and directed., removing surplus excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above starting point, complete all as specified and directed., returning, filling in, soil obtained from excavation including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed., supply and laying sub class b bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed., sand cushioning with ganga sand to underground cable (8 cm thick before laying and 15 cm thick after laying the cable) complete all as specified and directed., replacement of 40 mm gi tubing light grade with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor/as garden post including 2 nos mild steel fi clamps 35 3 mm size to support pipe with pole complete all as specified and directed., boring under road horizontally of size 40/50 mm bore using gi pipe for passing of cable in road/path in hard/soft/loose soil complete all as specified and directed., applying two coats of aluminium paint over a coat of red oxide on steel tubular po
Tender For bid to ras corrigendum : supply of scr panel ct 1875/2.5a, 10va, accuracy class-1, 1.5kv grade insulation generally, as per bhel spec , gen panel ct 1500/2.5a, 15va, accuracy class-1, 3kv grade insulation as per item no-01 of bhel spec
Tender For supply of electric item - led bulb 07 watt isi mark , led bulb 09 or 10 watt isi mark , pcb for led bulb 09 watt isi mark , led bulb 15 watt isi mark , led bulb 18 or 20 watt isi mark , insulation tape three forth inch steel grip isi mark , insulation tape half inch steel grip isi mark , havells fp l 36 watt 2g11 4 pin base cfl isi mark , flood light halogen 100 watt isi mark , havells electronic ballast cfl choke 36 watt isi mark , led tube light assy 18 or 20 watt complete sets isi mark , led tube light assy 36 or 40 watt complete sets isi mark , flood light 100 watt make isi mark , led high bay light 50 watt isi mark , digital line tester as per tech spec isi mark , emergency light with led bulb fitted isi mark , bed switch isi mark , hanging light for office table isi mark , plug 3 pin 5 or 6 amp isi mark , plug 3 pin 15 or 16 amp isi mark , socket 3 pin 5 or 6 amp isi mark , socket 5 pin 15 or 16 amp isi mark , switch 6 amp isi mark , switch 16 amp isi mark , power socket isi mark , main switch 32 amp 415 v isi mark , main switch 63 amp 415 v isi mark , main switch 100 amp 415 v isi mark , main switch 200 amp 415 v isi mark , switch socket combined 05 or 06 amp isi mark , switch socket combined 15 or 16 amp isi mark , modular switch board 12 way isi mark , modular switch board 06 way isi mark , stabilizer auto voltage 1 kva isi mark , stabilizer auto voltage 5 kva isi mark , casing capping 1 inch width double cover isi mark , casing clip as per tech spec isi mark , bend for casing capping 1 inch width isi mark , pvc juction box isi mark , square box isi mark , extension cord 15 amp isi mark , mcb single pole 06 amp isi mark , mcb single pole 10 amp isi mark , mcb single pole 16 amp isi mark , mcb single pole 20 amp isi mark , mcb single pole 25 amp isi mark , mcb single pole 32 amp isi mark , mcb double pole 10 amp isi mark , mcb double pole 16 amp isi mark , mcb double pole 32 amp isi mark , mcb single pole 63 amp isi mark , mcb three pole 63 amp isi mark , mcb double pole 63 amp isi mark , mcb double pole 100 amp isi mark , mcb three pole 32 amp isi mark , mcb four pole 63 amp isi mark , mcb box 4 way isi mark , mcb box 6 way isi mark , mcb box 8 way isi mark , mcb box 10 way isi mark , invertor 2 kva with 2 nos backup batteries 12v 180 ah isi mark , holder button isi mark , holder angle isi mark , holder pendent isi mark , pvc switch board size 8 x 10 inch isi mark , pvc switch board size 6 x 4 inch isi mark , pvc switch board size 6 x 8 inch isi mark , pvc switch board size 7 x 4 inch isi mark , pvc switch board size 4 x 4 inch isi mark , geyser 10 ltrs cap isi mark , kit kat fuse 16 amp isi mark , kit kat fuse 32 amp isi mark , kit kat fuse 63 amp isi mark , kit kat fuse 100 amp isi mark , kit kat fuse 200 amp isi mark , board indicator switch 06 amp isi mark , exhaust fan size 12 inch isi mark , ceiling rose 06 amp isi mark , switch bell 06 amp isi mark , electric bell bul bul bird chime isi mark , flexible wire twin twisted 23 76 isi mark , pvc electric wire single core copper conductor 1 sqmm isi mark , pvc electric wire double core copper conductor 1 sqmm isi mark , pvc electric wire single core copper conductor 1 pt 5 sqmm isi mark , pvc electric wire double core copper conductor 1 pt 5 sqmm isi mark , pvc electric wire single core copper conductor 2 pt 5 sqmm isi mark , pvc electric wire double core copper conductor 2 pt 5 sqmm isi mark , pvc electric wire single core copper conductor 4 sqmm isi mark , pvc electric wire double core copper conductor 4 sqmm isi mark , star steel screw half inch each pkts 100 nos isi mark , star steel screw 1 inch each pkts 100 nos isi mark , star steel screw one and half inch each pkts 100 nos isi mark , plastic gitti 3 inch each pkts 100 nos isi mark , lt wire 4 mm each roll 90 mtrs isi mark , lt wire 5 mm each roll 90 mtrs isi mark , led street light 20 watt isi mark , electric cable 16 mm aluminium isi mark , led neon rope light 5 mtrs roll blue and yellow colour isi mark , el
Tender For supply of fire retardant low tension (frlt) insulation tape for electrical purpose size:- 20 mm width and 0.3 mm. +/- 0.05 mm thick as per icf specification no. icf/elec./921, rev. 1, 2025 or latest (thematter "s.e.railway p.o. no. ...................... dt................. to be indelibly printed with green colour throughout the length of the tape). [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]
Tender For supply of 19 core 3 sq mm cable with elastomeric insulation and sheath grade 750 volts colour of sheath-black.conforming to specification: rdso spec.no: spec/e-14/01, pt-i,rev-ii,1993, item-4, table-2.ammendment no.2,april-1998,ammendment no.3,april-2000,ammendment no.4,sept.-2003. [ warranty period: 30 months after the date of delivery ] ]