Latest yarn Tenders | Government yarn Tenders

Central Government/Public Sector

CTN :45597373

02 Jul, 2026 1.94 Lacs

Bilaspur (Hp) - Himachal Pradesh

Tender For supply of cotton yarn waste (v2) as per is 5485 (q3) , markin cloth (v2) (q3)

Central Government/Public Sector

CTN :44875815

18 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For bid to ras tender for supply of pr for woven asbestos glanddry asbestos - wovenasb 3.2mm , woven asb 2.2mm , gland lub gph asb 10sqmm , gland lub gph asb 12sqmm , gland lub gph asb 14sqmm , gland lub gph asb 16sqmm , glandlubgph asb 8sqmm , gland lub gph asb 10sqmm , rope dry asb 6mm , rope dry asb 10mm , rope dry asb 16mm , rope dry asb 20mm , gland dryasb12mm , yarnasb compdr 3mm , yarn asb comp dry 4mm , yarn asb comp dry 6mm

State Government

CTN :45571118

19 Jun, 2026 NA

Hisar - Haryana

Tender For chhan block: barwala panchayat: chhan dist.: hisar annual maintenance work for water supply. - leakage rectification of inlet channel of r.c.c. pipeline with the help of cement plaster, spun, yarn excavation and jointing in position including manual cutting of grass uprooting cleaning of grass complete in all respect. /np2 / at village chhan

corporations/Associations/Others

CTN :45573117

29 Jun, 2026 2.49 Lacs

Kolkata - West Bengal

Tender For installation of insulating materials on the street light pole bodies at different places in ward no.82. under br. ix. - building works(m) drain, down pipes, chimney etc?.(c). additional rate?(21)supplying, fitting & fixing upvc pipes a- type and fittings conforming to is:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (spun yarn, valamoid/bitumen/m-seal etc) complete.a) upvc pipes: (iii) 160 mm. dia., building works(m) drain, down pipes, chimney etc?.(c). additional rate?(21)supplying, fitting & fixing upvc pipes a- type and fittings conforming to is:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (spun yarn, valamoid/bitumen/m-seal etc) complete.a) upvc pipes:(ii) 110 mm. dia., a n n e x u r e - i basic rate of materials: (all rates of materials from k-1 to k-14 are excluding vat) 118. 10swg gi wire, sub total, gst 18%, cess 1%

corporations/Associations/Others

CTN :45573118

29 Jun, 2026 2.48 Lacs

Kolkata - West Bengal

Tender For installation of insulating materials on the street light pole bodies at different places in ward no.79. under br. ix. - building works(m) drain, down pipes, chimney etc?.(c). additional rate?(21)supplying, fitting & fixing upvc pipes a- type and fittings conforming to is:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (spun yarn, valamoid/bitumen/m-seal etc) complete.a) upvc pipes: (iii) 160 mm. dia., building works(m) drain, down pipes, chimney etc?.(c). additional rate?(21)supplying, fitting & fixing upvc pipes a- type and fittings conforming to is:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (spun yarn, valamoid/bitumen/m-seal etc) complete.a) upvc pipes:(ii) 110 mm. dia., a n n e x u r e - i basic rate of materials: (all rates of materials from k-1 to k-14 are excluding vat) 118. 10swg gi wire, sub total, gst 18%, cess 1%

State Government

CTN :45582285

07 Jul, 2026 NA

Botad - Gujarat

Tender For supplying and stacking various type of building, road& other construction materials, at various places of taluka botad under taluka panchayat, botad under mgnrega (annual unit rate) - seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, moorum, dry distemper, distemper primer, enamel paint, water proofing cement paint, ordinary varnish, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, spirit, spun yarn, mild steel plates, mild steel rivets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, through and bond stone size 24 x 24 x 39cm, stone dust, kota stone slab 20 mm to 25 mm thick (semi-polished), kota stone slab 25 mm thick (rough chiseled), stone grit 6 mm and down size or pea sized gravel, g.i limpet washer, bitumen washer, water proofing materials, seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, moorum, dry distemper, distemper primer, enamel paint, water proofing cement paint, ordinary varnish, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, spirit, spun yarn, mild steel plates, mild steel rivets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, through and bond stone size 24 x 24 x 39cm, stone dust, kota stone slab 20 mm to 25 mm thick (semi-polished), kota stone slab 25 mm thick (rough chiseled), stone grit 6 mm and down size or pea sized gravel, g.i limpet washer, bitumen washer, water proofing materials, seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm

State Government

CTN :45583213

07 Jul, 2026 NA

Botad - Gujarat

Tender For supplying and stacking various type of building, road& other construction materials, at various places of taluka gadhada under taluka panchayat, gadhada under mgnrega (annual unit rate) - seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, moorum, dry distemper, distemper primer, enamel paint, water proofing cement paint, ordinary varnish, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, spirit, spun yarn, mild steel plates, mild steel rivets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, through and bond stone size 24 x 24 x 39cm, stone dust, kota stone slab 20 mm to 25 mm thick (semi-polished), kota stone slab 25 mm thick (rough chiseled), stone grit 6 mm and down size or pea sized gravel, g.i limpet washer, bitumen washer, water proofing materials, seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, moorum, dry distemper, distemper primer, enamel paint, water proofing cement paint, ordinary varnish, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, spirit, spun yarn, mild steel plates, mild steel rivets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, through and bond stone size 24 x 24 x 39cm, stone dust, kota stone slab 20 mm to 25 mm thick (semi-polished), kota stone slab 25 mm thick (rough chiseled), stone grit 6 mm and down size or pea sized gravel, g.i limpet washer, bitumen washer, water proofing materials

corporations/Associations/Others

CTN :45561713

27 Jun, 2026 2.48 Lacs

Kolkata - West Bengal

Tender For installation of insulating materials on the street light poles at different places in ward no 102, br-xii. - building works(m) drain, down pipes, chimney etc?.(c). additional rate?(21)supplying, fitting & fixing upvc pipes a- type and fittings conforming to is:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (spun yarn, valamoid/bitumen/m-seal etc) complete.a) upvc pipes: (iii) 160 mm. dia., a n n e x u r e - i basic rate of materials: (all rates of materials from k-1 to k-14 are excluding vat) 158. 40x6mm thick ms clamp on pole upto 100mm dia, a n n e x u r e - i basic rate of materials: (all rates of materials from k-1 to k-14 are excluding vat) 194. 6mm dia rag bolt with nut, estimated amount, 18% gst, 1% cess

CTN :45532300

29 Jun, 2026 15.00 Lacs

Madurai - Tamil Nadu

Tender For schedule - a 1 (boq 1) water supply pipeline material supply - g.i. pipes "b" class 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i. elbow 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i. bend 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i. coupling 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i.union 20mm, 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i.tee 20mm.g.i, 25mm.g.i, 32mm.g.i, 40mm.g.i, 50mm.g.i, 65mm.g.i, 80mm.g.i, 100mm.g.i, g.i. pipe nipple 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i. hex nipple 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i. plug 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i. reducer 20mm x 15mm, 25mm x 20mm, 32mm x 25mm, 40mm x 32mm, 50mm x 40mm, 65mm x 50mm, 80mm x 65mm, 100mm x 80mm, gate valve isi 3/4", 1", 11/4", 11/2", 2", 21/2", 3", 4", gate valve non -isi 3/4", 1", 11/4", 11/2", 2", 21/2", 3", 4", 50mm cid/f sluice valve, 80mm cid/f sluice valve, 100mm cid/f sluice valve, 50mm ms coupler, 65mm ms coupler, 100mm ms coupler, 20mm single air valve, 20mm double air valve, 40mm double air valve, 15mm ferrule, 20mm ferrule, solvent cement, hot treat oil, yarn, lend wool, cement, g.i. tape 20mm, 20mm waste not tap, 20mm brass bib cock, 40mm brass bib cock, 1" gi length coupling, 11/4" gi length coupling, 11/2" gi length coupling, 2" gi length coupling, 21/2" gi length coupling, 3" gi length coupling, 4" gi length coupling, 1" non return valve, 11/4" non return valve, 11/2" non return valve, 2" non return valve, 21/2" non return valve, 3" non return valve, 4" non return valve, pvc pipes of 6kg/cm2 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc pipes of 4kg/cm2 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc coupler 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc bend 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc end cap 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc mta 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc fta 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc tee 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc saddle fees suitablefor 20mm, 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, super thick pvc pipes 20mm, 25mm, 32mm, 40mm, 50mm, pvc reducers 160x140mm, 140x 90mm, 110x75mm, 75x63mm, 63x50mm, 450mm a.c. pipe, 300mm a.c. pipe, 250 mm a.c. pipe, 150 mm a.c. pipe, 450mm c.i.t. joint, 300mm c.i.t. joint, 250mm c.i.t. joint, 150mm c.i.t. joint, 5" g.i.pipe, 6" g.i.pipe, 7" g.i.pipe, 8" g.i.pipe, 9" g.i.pipe, 10" g.i.pipe, 5" pvc pipe, 6" pvc pipe, 7" pvc pipe, 8" pvc pipe, 9" pvc pipe, 10" pvc pipe, 5x5/8 bolt nut with washer, 3x5/8 bolt nut with washer, 31/2x3/4 bolt nut with washer, 1" steal hex nipple, 11/4" steal hex nipple, 11/2" steal hex nipple, 2" steal hex nipple, 21/2" steal hex nipple, 3" steal hex nipple, 4" steal hex nipple, 11/4"x1" steal reduce hex nipple, 2"x11/2" steal reduce hex nipple, 21/2"x2" steal reduce hex nipple, 3"x21/2" steal reduce hex nipple, 31/2"x3" steal reduce hex nipple, 11/2"x1" steal reduce bush, 2"x11/2" steal reduce bush, 21/2"x2" steal reduce bush, 3"x21/2" steal reduce bush, 31/2"x3" steal reduce bush, 1" long size bore clamp, 11/2" long size bore clamp, 11/4" long size bore clamp, 2" long size bore clamp, 21/2" long size bore clamp, 3" long size bore clamp, 4" long size bore clamp, 8" bore cover, 1"x2 feet pipe nipple, 11/4"x2 feet pipe nipple, 11/2"x2 feet pipe nipple, 2"x2 feet pipe nipple, 21/2"x2 feet pipe nipple, pvc water tank litre, cellak 100 ml pottle

State Government

CTN :45535662

14 Jul, 2026 40.00 Lacs

Rewa - Madhya Pradesh

Tender For jail factory raw material supply - plastic cans (thick/thin/narrow-necked), kitchen sink (various sizes), thinner (1-liter pack), super-grade shellac, super-grade sandarac resin, plywood 19mm (48), plywood 12mm (48), plywood 6mm (48), sunmica/laminate (48), fevicol (1/2 kg pack), white/yellow/red earth pigment (bamatti), turpentine oil (1-liter pack), various paints (1-liter pack), iron hinges (various sizes), carpenter's pencil, triangular file 4, triangular file for large saw 8, steel screws (all sizes, pack of 100), foam 4-inch, 32 density (3x6) 100mm, foam 2-inch, 32 density (3x6) 50mm, foam 1-inch, 32 density (3x6) 25mm, rexine (all colors), wood stain - yellow (1-liter pack), babool wood scraps/offcuts, sarai wood scraps/offcuts, revolving chair wheel/caster, solution/adhesive (1-liter pack), sharpening stone (oil stone), cobbler's nails (small/large), emery cloth/sandpaper (all types), white lead/asian putty, insulating oil, basting/welding rod (no. 8, 10), plain iron rod (2, 3 sut/approx. 6mm, 10mm), iron rivets (various sizes), iron strip (1 inch wide, 1 sut/approx. 3mm thick), g.i. sheet 24 gauge, g.i. (galvanized iron) thick/thin wire, carbide, black iron sheet (12 gauge & 14 gauge), yellow wax, abrasive cloth/paper (nos. 60, 80, 120), muslin cloth, panel pins (all sizes), sheet metal box latch/hasp, sheet metal box handle, painting brushes (all sizes), m.s. iron pipes (all sizes), waterproof plywood (6 mm, 84), large metal cutter blade, small metal cutter blade, tacki amber (adhesive), metal/wood primer, iron pipe (1 inch), measuring tape (3 meters), long steel hinge (6 feet), steel pipe inserts/plugs, mosquito mesh/netting, plastic handle, aldrop, runda (hand planer) machine cutter blade, laminated board (18 mm), section (b) weaving industry, fittings, rock salt, dyes/colors (all types, fast/permanent), canvas strap (4 inches), fine belt a-82, power loom wire heald (13 inches), power loom metal reed (no. 36) x 72, fine belt a 102, b-37, b-43, fadi 72 x 20, fine belt a 94 and a 120, grease servo super (in 1 kg pack), mobil oil servo super 15w-40 (in 20-liter pack), section (c) stitching/tailoring industry, white thread terrycot (800 meters), hook/needle plate (throat plate), shuttle (small machine), top rod, feed dog, plate, white transparent buttons (in pack of 1000), bobbin case, tailor's measuring tape, tailor's chalk (pack of 10 pieces), machine oil (in 1-liter pack), hand needle no. 7 (reel), machine needle no. 18, 21, interlock needle, lily (thread/yarn), press buckram, section (d) sizzing/tracing paper industry, white paper (1727) 57 gsm, white paper (1822) 57 gsm, laser paper (1727) 80 gsm brown paper (3646), plastic sheet (110 microns), universal wash (in 5-liter pack), fountain concentrate (in 5-liter pack), offset jobbing black ink (in 1 kg pack), binding cloth, binding thread (6/20), refined wheat flour (maida), arrowroot powder, ivory sheet (2228) 300 gsm (mpr paper), colored card sheet (2228) 210 gsm, copper sulphate (blue vitriol), boda yellow/white (in various weights/ounces), ruled paper (1626) 57 gsm, offset sponge, rin supreme soap (250g pack), twine/sutli, cover paper (2336) 110 gsm, answer booklet ruled paper (1822) 57 gsm, roller cloth (no. 90), roller cloth (no. 160), blanket (2123), colored card sheet (2228) 180 gsm, coated card sheet (2228) 200 gsm, cover paper (2030) 110 gsm, colored paper (1822) 54 gsm, scrap paper (2030), stapler pins (no. 24), one-side coated card sheet (2228) 180 gsm, numbering machine in central jail rewa m.p.

Yarn Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors