Latest yoke support plate Tenders | Government yoke support plate Tenders

Central Government/Public Sector

CTN :45433466

27 Jun, 2026 15.78 Lacs

Porbandar - Gujarat

Tender For corrigendum : tender for supply of lp of frsq sea boat for yearly routine konrad - -o ring , bushing , screw fillister , ring snap , complete u joint , seal oil , cap screw sh ss , carrier 600 series front bearing , washer tab , washer , o ring steering pin , pin haing , gimbal carriear , shaft , gimbal housing assembly , shim set hd upper , o ring , bearing set hd upper , bellow , clamp bellows , nut jam nylock

Central Government/Public Sector

CTN :45360611

24 Jun, 2026 NA

Raipur - Chhattisgarh

Tender For corrigendum : procurement of spares for injection and unloading blowers of dsi systemat ntpc dadri - helical gear,kcs101+&10,kay,blower, bearing puller,kcs1016+&28,kay,1016wc, lock washer,kcs1016+&26,kay,1016wc, grease nipple,kcs1016+&25,kay,1016wc, drain plug,kcs1016+&24,kay,1016wc, oil securing disc,kcs1016+&23,kay,1016wc, spacer,kcs101+&021,kay,1016wc, oil level,kcs101+&20,kay,1016 wc, key,kcs101+&19,kay,blower,1016wc, external circlip,kcs101+&18,kay,blower, check nut,kcs101+&17,kay,blower,1016wc, drain plug,kcs101+&15,kay,blower,1016wc, breather plug,kcs101+&14,kay,blower, thrust plate,kcs101+&11,kay,blower, bearing cover,kcs101+&09,kay,blower, bearing cover,kcs101+&08,kay,blower, gear cover,kcs101+&07,kay,blower,1016wc, bearing housing,kcs101+&06,kay,1016wc, brg hsg(gs),kcs101+&05,kay,1016wc, side plate(1gs+1ps),kcs1016+&02,kay, motor pulley,5,kay,1016wc, blower pulley,6,kay,1016wc, bearing puller disc,29,kay,blower,1016ac, lock washer,27,kay,blower,1016ac, grease nipple,26,kay,blower,1016ac, bearing drain plug,25,kay,blower,1016ac, oil securing disc,24,kay,blower,1016ac, spacer,22,kay,blower,1016ac, oil level indicator,21,kay,1016 ac, key for pulley,20,kay,1016 ac, external circlip,19,kay,1016 ac, check nut,18,kay,1016 ac, drain plug,16,kay,blower,1016ac, breather plug,15,kay,blower,1016ac, thrust plate,12,kay,blower,1016ac, bearing cover driven,10,kay,1016ac, helical gear,11,kay,blower,1016ac, bearing cover,09,kay,blower,1016ac, gear cover,08,kay,blower,1016ac, bearing housing(p.s),07,kay,blower, bearing housing,06,kay,blower,1016ac, gear side plate,03,kay,blower,1016ac, pulley side plate,02,kay,blower,1016ac, motor pulley,5,kay,1016ac, blower pulley,6,kay,1016ac, suction filter,12,kay,1016ac, anti-vibration pad,17,kay,1016ac, ss exp bellow,24,kay,1016ac, ss expansion bellow,26,kay,1016ac

CTN :45619743

25 Jun, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnr, boxnhsm1, bobrnm1, boxnm1 & bcnm1 wagons no as following: [1] ser 25079661921 boxnr [2] ser 12079660030 boxnhsm1 [3] er 72029662262 bobrnm1 [4] ser 25079763045 boxnr [5] ser 25079763397 boxnr [6] ser 10079734539 boxnm1 [7] ser 25079662201 boxnr [8] er 30029021489 bcnm1 [9] cr 30019141180 bcnm1 [10] scr 10099632976 boxnm1 condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (105.450 mt) is the lot quantity (105.450 mt) as mentioned in the catalogue.[2]. the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- (i) for boxnr, boxnhsm1, boxnm1, & bcnm1 wagons : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bobrnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. "

CTN :45619744

25 Jun, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnr, boxnhl, boxnm1, boxnlwm2, boxnrm2, bvzc & bcnm1 wagons no as following: [1] ser 25079460739 boxnr [2] ecr 22100982925 boxnhl [3] scr 10099661570 boxnm1 [4] ecor 14120827393 boxnlwm2 [5] er 10029660857 boxnm1 [6] er 10029660321 boxnm1 [7] ser 10079673425 boxnm1 [8] cr 25019600720 boxnrm2 [9] nr 85039660081 bvzc [10] scr 30098961266 bcnm1 condition:-[1]. the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (103.650 mt) is the lot quantity (103.650 mt) as mentioned in the catalogue.[2]. the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- (i) for boxnr, boxnhl, boxnm1, boxnlwm2, boxnrm2 & bcnm1 wagons : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bvzc wagon : wheel set with rb and axle box, brake cylinder, distributer valve, draft gear, coupler body, yoke & yoke pin as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024

CTN :45619745

25 Jun, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bcnm1, boxnm1, boxnlw & bvzc wagons no as following: [1] ser 30078964522 bcnm1 [2] nr 30039016437 bcnm1 [3] scr 10099664175 boxnm1 [4] wcr 14160651309 boxnlw [5] ser 10079662429 boxnm1 [6] special repair 85069757454 bvzc [7] special repair 85060260045 bvzc condition:-[1]. the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (78.090 mt) is the lot quantity (78.090 mt) as mentioned in the catalogue.[2]. the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- (i) for bcnm1, boxnm1 & boxnlw wagons : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bvzc wagon : wheel set with rb and axle box, brake cylinder, distributer valve, draft gear, coupler body, yoke & yoke pin as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024

Central Government / Public Sector

CTN :45591781

22 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot ferrous scrap - mixed scrap of heavy melting : actual lot no. 03122606 0634 pl no.98050047 (15) (hsn code 72044900-gst18% on fcm basis) scrap of cond. & unserviceable rusted and corroded mixed scrap of heavy melting ms, cs, ci, gi, ss contains pipes end body pcs. horizontal levers hand brake wheels angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins foot steps cut bits side barer housings pipe pcs straps liners sheets pipe pcs pins throwers locks races collars axle box covers, air brake pipes, guard seats, ms end body pcs, ms sheets, ms cut bits, ms rod pcs, sab parts, gi wire, ms ladders, ms channels, door hangers, tool box, ms meshes, bp fp hose pipes, knuckles, crushed paint drums, grease seals, yoke support plates, sliding doors yoke pins, sheet strips, ms pipes and pcs, rubber pads, chairs, roof sheets, grease drum, auxiliary reservoirs, cone bearing, hoop iron. wedges, hyd. hoses fabricating scrap and other miscellaneous items of wagons sorts & sizes full or broken with or without attachments. location: road no.3 (single cut permitted for loading purpose only) (note: 1. if any ss/ corten steel & non-ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )

Central Government/Public Sector

CTN :45576450

01 Jul, 2026 NA

Ludhiana - Punjab

Tender For supply of csk head ss allen bolt, grade-a2-70 as per din 7991/iso 10642 gr. 304 of size : 10x30 mm in using for bellow plate of 6fra6068 type traction motor. [ warranty period: 30 monthsafter the date of delivery ] ]

CTN :45509948

24 Jun, 2026 70.00 Lacs

Gandhinagar - Gujarat

Tender For supply of electro-mechanical & instrumentation items for mass balancing reservoir (mbr- supply of pump starter panel including individual vfd for 125 kw (02w+1s), supply of 1.1 kv grade cable- aluminium conductor supply, laying, testing & commissioning 1.1 kv grade, xlpe insulated, stranded aluminium conductor cables, a) 3.5 c x 185 sq.mm, b) 3.5 c x 300 sq.mm, 1.1 kv grade, xlpe insulated, stranded copper conductor, galvanised steel flat strip / round wire armoured, extruded pvc type st2 sheathed, heavy duty cable, a) 3 c x 2.5 sq.mm, supply of gi perforated type cable trays with returned edge / flange, fabricated from 2.0 mm thick sheet steel in the standard length of 2.5 mtrs, duly hot dipped galvanized after fabrication as per is 2629-1989 / is 4759-1984 including accessories such as coupler plates/ fish plates, bends, tees, reducers, elbows, covers and electro-galvanized hardware etc, erected on existing support as per specification, a) 450(w) x 75(h) x 2.0 mm thick, b) 300(w) x 35(h) x 2.0 mm thick, c) 100(w) x 35(h) x 2.0 mm thick, mechanical items, supply of di pipes k-9, dia 500mm, di fittings 500mm, , , , , , for 300 mm dia butterfly valve, for 500 mm dia butterfly valve, for 600 mm dia butterfly valve, instrumentation items, non-return valve 300 mm dia, , , , supply 10cx 1.5 sq.mm signal cable, supply 1px 1.5 sq.mm signal cable, supply 2cx 1.5 sq.mm signal cable, supply horizontal end suction pump 780m3/hr @40m head, impeller: ss, shaft: ss, casing: ci including pumps with mechanical seal. 120 kw 2w+ 1s, supply of 1/2" pressure gauge 0-10 bar,, supply of butterfly valve, supply of electric actuator, supply of electromagnetic flow meter 500 mm dia, supply of expansion bellow, supply of pressure transmitter, 0-7 kg/cm2,, supply of zero velocity valve 500mm dia

CTN :45369164

20 Jun, 2026 NA

Birbhum - West Bengal

Tender For corrigendum : procurement of fail freeze double acting smart positioner with accessories for unit 1 sadc and other area for bktpp - double acting positioner with hart additional data as per sectiuon iv, item description, smart electro-pneumatic positioner additional data as per sectiuon iv, item description, smart positioner. make: ytc ytc additional data as per sectiuon iv, item description, ss304 fittings & accessories ( 1> straight connector male for 6 mm od tube : 200 nos 2> nipple 4" length, 15 nb, " bsp threaded one side, ss304 qty. 10 nos. (positioner jb air supply through hose connection) 3> fittings, connector, male, " nptm x 6 mm od tube, ss 304qty:200 no 4> fittings, connector, " ferule and nut for ss 1/4" tube qty. 200 nos. 5> fittings, connector, " ss seamless tube union qty. 200 no. ), ball valve size 1/2 ",screwend,ss for air line manually operated ( screwend,ss for air line manually operated. ball valve size 1/2 " ,screwend,ss for air line manually operated (size-1/2 inch ) ball valve size 1/2" ,screwend,ss for air line manually operated,class-150,moc-body:-astm a 351 gr.cf8(ss304),ball & stem:-ss304,seat,body&stem seal:- tfe(teflon),handle & stopper plate-ss, make :ksb/hydair/parker/l&t, 3-piece ball valve as per attached annexure-i ), air filter regulator,1/4in,norgren norgren b73g-2ak-qd1-rmg,0.3-10 bar ( or equivalant model of norgren/smc / plaka/veljan as per attached annexure-i ), hydraulic hose 3m,wire braided 2sn dn10 din20022/en853/sae 100r2at,length: 3 mtr,max pressure: 330 bar,both end fittings 1/2" bsp ( hose, hydraulic hose, wire braided, 2sn dn10 din20022/en853/sae 100r2at, length: 3 mtr, max pressure: 330 bar, both end fittings " bspt. inner tube of oilresistant synthetic rubber, two wire braids reinforcement, oiland weather- resistant synthetic rubber cover, temperature withstanding capacity upto 120 degc as per attached annexure-i ), hose,flexible,ss # 1/4" x 1500 mm - scp13016 ( 1.5 meter flexible bellow hose with 6 mm od tube and fittings with coupler for ss tube connection. as per attached annexure-i )

CTN :45515797

18 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - condemned 11 nos wagon sl no. [1] special repair bcnm1 30069131797, [2] special repair bcnm1 30069160773, [3] er bcnm1 30029160300, [4] er bcnm1 30029160065, [5] ser bcnm1 30079160565, [6] ser bcnm1 30079168493, [7] ser bcnm1 30079161289, [8] wr boxnr 25089600651, [9] cr boxnr 25019660441, [10] er bobrnm1 72029561992, [11] er bcnm1 30029124524. total qty- 11 nos. excluded items of each wagons sl no- 1 to 10 are as follows: 1) wheel set with axle- 04 nos (one no wheel set with axle consists of two wheel disc & one axle), 2) ctrb- 08 nos, 3) bogie - 02 nos, 4) brake cylinder- 01 no, 5) draft gear- 02 nos , 6) coupler body- 02 nos, 7) yoke-02 nos, 8) yoke pin- 02 nos, 9) yoke supporting plate- 02 nos, 10) yoke pin support plate- 02 nos, 11) all sorts of bolster springs, 12) distributor valve (ci)- 01 no, 13) slack adjuster- 01 no, 14) knuckle- 02 nos, 15) anchor plate with safety plate- 02 nos, 16) brake beam complete for casnub bogie- 04 nos, 17) equalising lever with bush- 04 nos, 18) bogie brake push rod- 02 nos. (nb- apm not included as a excluded item as this item is not fitted in the aforesaid wagon and 02 nos hand break wheel deficient of the wagon sl no. 8 & 9). excluded items of wagon sl no- 11 (er-30029124524) are as follows: 1) wheel set with axle- 04 nos (one no wheel set with axle consists of two wheel disc & one axle), 2) ctrb- 08 nos, 3) brake cylinder- 01 no, 4) draft gear- 02 nos , 5) coupler body- 02 nos, 6) yoke-02 nos, 7) yoke pin- 02 nos, 8) yoke supporting plate- 02 nos, 9) yoke pin support plate- 02 nos, 10) all sorts of bolster springs, 11) distributor valve (ci)- 01 no, 12) slack adjuster- 01 no, 13) knuckle- 02 nos, 14) anchor plate with safety plate- 02 nos. (nb- apm- not included as a excluded item as this item is not fitted in the aforesaid wagon). nb: bogie (02 nos) not included in the excluded items of wagon sl no-11 (er-30029124524) as this wagon is fitted with casnub 22w(m)-bogies with wide horn which are no longer in use in any of the current design wagon vide edme/frt/rly bd's l/no-2018/m(n)/60/4, dated-14/11/2019 & this wagon should be sold & disposed with bogies. the wagons will be sold except excluded items mentioned above as per crse/frt/kkk's l/no. mc/300/pt. xx, dt. 10.04.2024. wagons sl no-1 to 10 to be sold without bogies & wagon sl no-11 to be sold with bogies.

Yoke Support Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector