Latest zebra crossing marking Tenders | Government zebra crossing marking Tenders

Central Government And Public Sector

CTN :45638298

08 Jul, 2026 NA

Sonitpur - Assam

Tender For supply of full gloss polyurethane enamel paint (two pack system), colour shade: light green to ral no. 6037 for painting of air spring top plate of capacity 120 kn. conforming to chapter v of rdso specification no. m&c / pcn / 100 / 2018. note: the paint shall be supplied in one liter packing only. ]

Central Government And Public Sector

CTN :45638299

08 Jul, 2026 NA

Sonitpur - Assam

Tender For supply of full gloss polyurethane enamel paint (two pack system), colour shade: sky blue to ral no. 5012 for painting of air spring top plate of capacity 160 kn. conforming to chapter v of rdso specificationno. m&c / pcn / 100 / 2018. note: the paint shall be supplied in one liter packing only. [ warranty period: 30 months after the date of delivery ] ]

CTN :45635364

06 Jul, 2026 5.00 Lacs

Najibabad - Uttar Pradesh

Tender For supply of hardware items - en 8 round of different size iso/c45e with mt certrificate , m.s round of different size iso 630/1980 , m.s. square of different size iso 1035-1980 , m.s plain washer of different size iso-7089 , spring washer flat saction of different size din-127/7980 , s.s. washer of different size. din-125a/ iso-7089 , spring washer bbbb/ssss of different size din-127/7980 , alluminium rivit of different size iso 15983a , hexa blade (miranda) size 1/2inch x 12inch iso-2336 part 1 & 2 , klipko make hose clamp of different size , spring steel flat 5 x 35 mm , split pin champion make of different size , red lead diwaldi make , white lead shakura make , m.seal (mahindra & mahindra make) , holdite compound in 500 gram , rustoline in 500 gram , shallack compound ellofic/pidilite , araldite (1.8 kg) , graphite powder , thread seal tape champion make size 3/4 inch (taflon tap) , emery tape carborandum make (rough) size 1 inch(roll of 50 mtr) , emery tape carborandum make size 1.5 inch (roll of 50 mtr) , emery tape carborandum make size 2inch (roll of 50 mtr) , emery cloth carborandum make no.50 , emery cloth carborandum make no. 80 , emery cloth carborandum make no. 100 , lead wire size 0.5mm thick , lead , locktite in 50 ml , percian blue enamel paint tube in 20ml , namda (wollen flat) size 30mm x 6 inchx6 inch , namda (wollen flat) size 1/2inchx1 inchx2 inch , brasso ( reckitt & colman make)500 ml , brass shim size 14 inch x 48 inch x 5 thou , brass shim size 14 inch x 48 inch x 8 thou , brass shim size 14 inch x 48 inch x 10 thou , brass rod different sizes , brass brazing rod size 1/8 inch , brass brazing rod size 1/4inch , brass connector with nut size 3/8 inch , brass connector with nut size 1/4 inch , brass ferrul size 3/8 inch , brass ferrul size 1/4 inch , brass connector with nut and brass ferrule size 3/8 inch , brass connector with nut and brass ferrule size 1/4 inch , s.s. plate 316 grade in all size , s.s. rod different sizes in 304 grade , stainless steel piano wire roll , internal circlip size 48 mm , internal circlip size 50 mm , internal circlip size 52 mm , internal circlip size 54 mm , internal circlip size 74 mm , external circlip size 18 mm , external circlip size 20 mm , external circlip size 22 mm , external circlip size 50 mm , external circlip size 54 mm , external circlip size 74 mm , steel wire rope 18mm (construction 6/19) tensile strength 1770n / mm square usha martin make with test certificate with hampcore , good year make flat belt size 6inchx8 ply , advani make super bond s.s. electrode size 2.5mm , annabond tube in 100 gram no. 666 , annabond retainer for bearing no. 412 , painting brush 25 mm , painting brush 50 mm , painting brush 70 mm , painting brush 100 mm , painting brush 125 mm , steel wire brush 3 inch x 6 inch , aligator type belt fastner steel belt locking size no.35 , copper pipe / tube any size , lrb pad (glass wool) size 1640mm x 1220mm x 50mm (with wirenetting) , m.s.connector forged 1/2 inchx 3/8 inch , cs hp glove valve bhel make socket weld class 800 size 1 inch , cs hp glove valve bhel make socket weld class 800 size 1.5 inch , cs hp glove valve bhel make socket weld class 800 size 2 inch , c.s. hp globe valve audco make socket welded class 800 size 1inch , c.s. hp globe valve audco make socket welded class 800 size 1.5inch , c.s. hp globe valve audco make socket welded class 800 size 2inch , hp non return valve , horixontal type socket welded class 800 size-3inch , m.s.flat different sizes , s.s. needle valve hd .5 inch , vacuum hose pipe 2.5 x 18 inch , wire braided steam hose rubber hose pipe id 3/4 inch , m.s. stud full thread 12x125mm , klinger make transparent plain gauge glass b-9 suitable for steam pressure reqd. 50kg/cm sq with gasket size 340 x 34 x 17 , m.s. socket forged steel 1 inch , welding glass plain (white) , welding glass plain (black) , welding hand gloves , cotton waste best quality (colour) , h.p.steam hose connection 1/4inch x 4 mtr

CTN :45626787

10 Jul, 2026 8.78 Lacs

Parganas - West Bengal

Tender For supply of g i street light pole , 2.5 sq. mm 3 core copper single strand armoured ug cable , 4.0 sq. mm 3 core copper single strand armoured ug cable , 1.5 sq. mm copper single core multi single strand cable , supply and fixing of led street light fittings - 30 watt, 230 volt ac cool day white , supply and fixing of pvc junction box, size - 140 mm x 140 mm x 95 mm, make sintex , 6 amp, single pole, mcb , supply and fixing of led post top made in cast aluminium spigot housing with decorative opal acrylic diffuser and ip65 protection , supplying and fixing of 2-pole, 415 v , 32amp main switch fuse unit, handle type , 50 mm, pvc, flexible hose pipe , 25 mm, pvc, flexible hose pipe , insulation tape. 5-mtr roll , supply and fixing of ceramic kit kat fuse unit, handle type, 100 amp, 440 volt , led aviation light with red colour glass. alluminium body, 60 watt, 220 volt a.c with ip 65 , 1 hp, 230v a.c, 1 phase, 50 hz, mono block pump , supply and fixing of 100 amp, 440 volt, 50 hz ac, 3 phase, 4 wire copper busbar chamber complete with connection at power house , supply and fixing of 100 amp, 4 pole, 440 volt, 50 hz ac, 3 phase main switch with connection at power house , supplying and fixing of dp sheet steel enclouser on surface, recess alone with 32 a , 240 volt dp mcb complete with connections, testing and commissioning etc , earthing with gi plate , supplying and laying 25mm x 5mm gi strip , labour charges for excavation of trench for ug cable laying , 50 mm gi pipe, c- class , g.i pipe of 2 inch dia for fixing post top lantern. c class , s.s.nut bolt and washers , g.i channel for mcb fixing , supply and fixing of 10 inch x 12 inch, 4 mm backalite sheet , labour charges including materials for making street light foundation base , labour charges for modification of existing gi street light pole , labour charges for fixing of post top lantern with gi pipe fixing , labour charges for painting of gi street light pole , labour charges for replacement of aviation light fixing on the top of high mast tressel tower of height 100 feet

corporations/Associations/Others

CTN :45263412

04 Jul, 2026 NA

Pudukkottai - Tamil Nadu

Tender For corrigendum : supply of 4500 sets of stay set complete - supply of silicagel blue, 0.6kva ups, stay set complete( quote price for single unit only), silicagel blue 10 to 12mm, pole pit for 9.0m and 9.14 m psc/rcc / all metal poles (each pit) 1.25 x 0.6 x 1.83 mtr, ordinary soil, semi rocky soil, heavy rocky soil where blasting/ cheseling required [specific approval should be obtained from concerned ee], stay pit, in ordinary soil [0.95 x 0.6 x 1.2m], semi rocky soil, stay pit in heavy rocky soil where blasting/ cheseling reqiured [specific approval should be obtained from concerned ee], erection of poles & stays (including refilling of excavated earth), erection of 7.5m / 8.0m poles [rcc / psc], erection of 9.00m / 9.14m rcc / psc/rail pole, tubular pole and all metal poles, stay set, erection stay set complete, stay erection without rod and pit, replacement of stay rod only. (including stay pit excavation & refilling & erection), replacement of guy shackle only in existing stay, erection of line materials, fixing of lt 1 ph "x" arm, fixing of lt/ht ti fitting, fixing of lt 3 ph "x" arm, fixing of 3[1/2] v ` x arm, fixing of 4[1/2] v ` x arm, fixing of 5 v x arm, fixing of tapping channel / guarding "x" arm, providing of line spacers in lt lines 1 phase, providing of line spacers in lt lines 3 phase, erection of ab switch with pt insulator & jumpering complete, erection of centre rotating switch ab switch complete, fixing of ht pin insulator / strain disc, 11 kv pin insulator with pin, 11 kv strain disc / polymer disc with hardware, 22 kv pin insulator with pin, 22 kv strain disc / polymer disc with hardware, 33 kv pin insulator with pin, 33 kv pin strain disc/polymer disc with hardware, fixing of lt pin insulator with pin, lt shakle with hardware, fixing of aluminium knob, paving stringing and sagging of conductor including binding of pin and proper tight [including transport of condutor from road side to work spot] per run, upto 7/2.59 mm acsr, 7/2.50 aaac including pvc cable upto 25 sqmm, acsr 7/3.35mm & 7/ 3.15 aaac including pvc cable above 25 sqmm, acsr 7/4.09 mm, above 7/4.09 mm acsr & dog conductor, earthing wiring and connection including transporting of earth pipe and excavation of pit], transformer structure earthing 10ft depth - 3 nos of pipe through tubes, dp earthing including all works [double side earthing], erection of 4th earth pipe including earthing, earthing of poles, earth pit masonary work 3 nos earth pits or using 3 nos concrete tub., replacement of detoriated earth pipe per location, concreting with mixture 1:3:6 [including all materials]., mass concreting for centre support for 2 feet including all materials, mass concreting for pole0.6x0.6x1.25m.with coping, sleeve concreting for pole 0.6 m x 0.6m x 0.3 m with coping, sleeve concreting for stay set 0.3 m & 0.75 long, erection of distribution transformer structure complete, excavation of structure pole pits 0.9 x 0.9 x 1.83 mtr, transporting of pole to pit location 2 nos., erection of poles 2 nos, excavation of stay pit 4 nos, erection of stay set (4 sets), mass concreting (cement:sand:jelly supplied by the contractor) 2 nos., erection of 22 kv ab switch, ttransformer structure earthing 10ft depth - 3 nos of pipe through earth tubes, erection of top channel, bed channel [2 nos channel] erection, cross with stud for bed channel erection, erection of belting angle / hg fuse angle, erection of hg fuse set, erection of ht las with jumpering and earthing, erection of lt las with jumbering and earthing, erection of jumpering [ht side], transformer wiring in lt side including jumpering bus bar etc., erection lt open type fuse unit arrangement single, erection lt open type fuse unit arrangement double, painting of stru. complete excluding dt [two coat of red oxide] all metal parts(excluding cost of paint)., painting of stru. complete excluding dt [one coat alu paint, excluding cost of paint), colour washing of 2 numbers structure p

State Government

CTN :45621543

29 Jun, 2026 2.73 Lacs

Angamaly - Kerala

Tender For mp-lads-angamaly bp-mp lads 2024-25 honble mp sr. p.p.suneer ( rajyasabha) construction of open gym and installation of equipment at chakkala pongam area of ward -13, thuravoor grama panchayat (infrastructure & purchasc) ernakulam district-general civil work - platform for open gym, 2.32:clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared., 2.8.1:earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil, 4.1.8:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources), 4.3.1:centering and shuttering including strutting, propping etc. and removal of form work for:foundations, footings, bases for columns, 4.1.3:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-iii)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources), od228316/2023-2024:construction of granular sub-base by providing local material, spreading in uniform layers on prepared surface and compacting by ramming to achieve the desired density complete i) using gravel mix/quarry muck, od223449/2023-2024:providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of stone aggregate, compacting and proper embedding/laying of inter locking paver blocks into the stone aggregate bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer-in-charge.60mm thick cement concrete paver block of m-35 grade with approved colour, design & pattern. modified spec. 16.91.1, od134330/2025-2026:providing and fixing gi pipe hand rail of approved size by welding and all labour charges etc., 5.23:smooth finishing of the exposed surface of rcc work with 6mm thick cement mortar 1:3 ( cement : 3 fine sand)., 13.52.2:finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.on concrete work, 13.52.1:finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.on steel work, od133367/2025-2026:supplying and fixing white stone bench with back rest,2 seater, od139386/2025-2026:providing and laying of interlocking concrete block pavements using80 mm m 40 interlocking paver blocks made by strong vibratory compaction of approvedsize,design @ shape ,laid in required pattern over and including a compacted bed of 6 mm stoneaggregate of 50 mm average thickness etc all complete as per the direction of engineer incharge., od234555/2023-2024:supplying and fixing in place granite name board of slab area less than 0.9sqm includingengraving and painting letters etc complete as per direction of engineer in charge at sitedar spec

State Government

CTN :45626266

29 Jun, 2026 11.59 Lacs

Belonia - Tripura

Tender For - r/ mtc. of rws/jjm schemes/ s.h.: providing & fitting fixing of electrical accessories, spare of panel board of different water supply schemes at different locations under hrishyamukh rd block under dws sub-division, belonia during the year 2026-27. - providing and fitting fixing of spare contact kits without coil (l & t make) for auto star delta starter., b) ml-2 type., c) ml-1.5 type., providing and fitting fixing of standard operating coil (l & t make) for auto star delta starter., b) ml-2 type., c) ml-1.5 type., supplying and fitting fixing of 4 pole ac control contactor (nhd series) suitable for bch made starter (standard coil voltages are 24, 110, 220/240 & 380/415 v, ac hz)., supplying and fitting fixing of 3 pole power contractor (type-mnx) suitable for 10 hp to 25 hp motor.mnx-25 (for l&t made starter), supplying and fitting fixing of pneumatic timer pn type delay relay-electro pneumatic) suitable for delay of time upto 30 sec. (bch made)., supplying and fitting fixing electronic timer type st-100 (l & t make) suitable for 240/300/415v, 50 hz having ranges for 3-30 secs/12-120 secs., supplying and fitting fixing of single phase preventer on delay 2 sec off delay 7 sec 65 vac asymmetry., providing & supplying of kit-kat rewireable porcelain fuse (cut-out) carrier & base of havells made (delux quality)., a) 63 amps/415 volt, b) 100 amps/415 volt, supplying and fitting fixing of 3 pole power contractor (type-ml) suitable for 10 hp to 25 hp motor.type ml-2 (for l&t make starter), supplying and fitting fixing of thermal timer type gt-200 (l & t make) suitable for 230/250v, 360v, 400/440v, 50 hz for 5-18 secs., supplying and fitting fixing of thermal overload relays mn2 type (directly operated& direct mounting on mnx 9-40 contactor) of l & t made. (suitable for ml/mnx type)., a) for relay range 9-15 a., b) for relay range 14-23 a., c) for relay range 20-33 a., supplying and fitting fixing of thermal overload relays (directly operated& direct mounting on ml-2/3 contactor) having relay range 9-14a/13-21a of l & t made. (suitable for ml-2/ml-3 type)., supplying and fitting fixing of citation-m overload relays (direct mounting with built in single phase protection) having relay range of bch made., a) for relay range 8.9-13.5 a., b) for relay range 13.2-30.00 a/17.4-24.00 a., c) for relay range 22.00-30.00 a., providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) gamair wood/ plywood pannel board for fitting fixing of electrical items, in/c 2 nos ms angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the engineer-in-charge., providing and fitting fixing 3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder complete as per specification and direction of the engineer-in-charge., providing and fitting fixing heavy duty box type (resin filled) power factor correction capacitor l & t make etc. complete as per specification and direction of the engineer-in-charge.i) 5-15 kvar 440 v, supplying isi marked/ taparia make tools for water supply scheme., i) sly wrench, ii) screw driver, iii. pipe wrench, iv. plier, v. hexo frame with blade, providing and fitting fixing of moving iron type, range 0-500 v, 96 mm x 96 mm size ac volt meter ( l & t / ae make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the engineer-in-charge., providing and fitting fixing of moving iron type, range 0-100/0-200 amp, 96 mm x 96 mm size ac amps meter direct reading type ( l & t / ae make) with selector switch and ct coil as a electrical instrument of the pannel board as per specification and direction of the engineerin-charge., providing and fitting fixing stee

Central Government And Public Sector

CTN :45625668

14 Jul, 2026 NA

Bilaspur - Chhattisgarh

Tender For execution of work of white washing and colour washing, distempering, painting etc.in staff quarters and service building under jurisdiction of sse(works)/east/bilaspur for the period ending 30-06-2027.

Central Government And Public Sector

CTN :45625677

14 Jul, 2026 NA

Bilaspur - Chhattisgarh

Tender For execution of work of white washing and colour washing, distempering, painting etc.in staff quarters and service building under aden/settlement-i/ for the period ending 30-06-2027..

Central Government And Public Sector

CTN :45625681

14 Jul, 2026 NA

Bilaspur - Chhattisgarh

Tender For execution of work of white washing and colour washing, distempering, painting etc.in staff quarters and service building under jurisdiction of sse(works)/south/bilaspur for the period ending 30-06-2027.

Zebra Crossing Marking Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors