Latest zinc coating Tenders | Government zinc coating Tenders

Central Government/Public Sector

CTN :45616511

29 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of "set of prevailing torque type hexagon nuts with non metallic insert to is:7002- 2018 (reaffirmed 2023), property class-10 to is: 1367 (part-8)-2020, a3b, with zinc coating as per clause no. 2 of rcf spec. mdts-057, rev-nil. as per following sizes and numbers: m8=16 nos., m10=6 nos., m12=24 nos., m16=56 nos., m20=8 nos., m24=24 nos., m30=8 nos." [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45617172

01 Jul, 2026 NA

Haridwar - Uttarakhand

Tender For tender for supply of fastnrs as per - hexagon socket head cap screw m6x12 - is 2269 , materialsteel property class 8.8 as per is 1367(part 3) , finish-zinco nickel size- pn-210004591 , hexagon socket head cap screw m5x20 - is 2269 , materialsteel property class 8.8 as per is 1367(part 3) , finish-zinco nickel size- pn-210004565 , hexagon head bolt , m14x1.5x60 as per is 1364(1) , material - 8.8 as per is 1367(3) , finish - zinco nickel n.std-is-1364 size- pn-210004793 , hexagon head screw full threaded m14x45 as peris-1364 (part-2)/iso- 4017/din-933 / uni 5739 , material property class-8.8 , finish- zinco-nickel , dimension , tolerance and other technical details as per governing standard size- pn-210003987 , stud m14x35 as per is- 1862 type -b/ uni-5911 (tap/metal end -1.5d) , material- steel property class 8.8 as per is-1367 (part-3) , coating- zinco-nickel , dimensions , tolerances and general requirements as per governing standard n.std-is-1862 size- p/n 212864183 , stud , m6x16 , type-c as per is-1862 , material- steel property class 8.8 as per is 1367(part-3) , finish- zinco- nickel n.std-is-1862 size- p/n 212865681 , hexagon head bolt m10x65 as per is 1364(part-1) , material- steel property class 8.8 as per is 1367(part-3) , finish- zinco- nickel n.std-is-1364 size- p/n 212803406 , flat washer for round slotted screw with outer dia 14 , inner dia 8.4 , thickness 1.6 as per uni 6592 material -teflon n.std-uni 6592 size- pn-210078356 , serrated washer , 8.7x13.5x2.5 (for bolt size- m8) mat-steelen 1.7182 or eqvlnt. hardness greater than 465 hv1 , zincflake coating , tolerance and gen. terms as per spec-gt04004 (as applicable for material- st-zn) , model no- nl8 of nord lock or eqvlnt. size- p/n-210007776 , serrated washer , 8.7x16.6x2(for bolt size-m8) , mat-stainless steel-en 1.4404 (aisi 316l)or eqvlnt.hardness greater than 520 hv0.05 , surface hardened , model no- nl8spss of nord lock or eqvlnt. size- pn-210007763 , serrated washer , 10.7x16.6x2 (for bolt size m10) material- steel-en 1.4404 or eqvlnt. hardness greater than 520 hv0.05 , model no-nl10ss of nord lock or eqvlnt. size- pn-210007790

corporations/Associations/Others

CTN :45619983

04 Jul, 2026 9.88 Lacs

Meerut - Uttar Pradesh

Tender For supply of brasso liquid , araldite 1 , araldite 2 , m. seal , teflon tape , rustoline , red lead , white lead , holtite sealing compound , shellac compound , graphite powder flake , birkosit sealing compound , wd-40 spray , crc 226 , co2 cleaner , anabond 666 , jointing paste , g rapid plus , d321r thread sealent paste , l0500 cold galvanising spray , grease 10000 c , anti rust coating oks , contact cleaner 2621 oks , d p test kit , marking blue tube , emery grinding paste 1 , emery grinding paste 2 , emery grinding paste 3 , emery belt 1 , emery belt 2 , emery belt 3 , cooper sheet 1 , cooper sheet 2 , brass shim , woolen felt namda , neoprene rubber sheet 1 , neoprene rubber sheet 2 , rolgard grease , coloured cotton waste , old cotton dhoti , jute twin sutly

Central Government/Public Sector

CTN :45607221

20 Jul, 2026 40.00 Crore

Lucknow - Uttar Pradesh

Tender For supply of surgical consumables - ll, absorbable hemostat (oxidized regenerated cellulose) 4 in.x 8 in. (10 cm x 20 cm), absorbable hemostat (oxidized regenerated cellulose) 2 in x 4 in (5.1cm x 10.2cm), absorbable hemostat (oxidized regenerated cellulose) 2 in. x 3in. (5.1cm x 7.6cm), absorbable hemostat (oxidized regenerated cellulose) 3 in x 4in. (7.6 cm x10.2 cm), absorbable hemostat powder microporous polysaccharide hemosphere in one single sterile pack, absorbable hemostatic gelatin sponge (7cm x 5cm x 1cm), absorbable hemostatic gelatin sponge (8cm x 3cm) anal, absorbable nasal dressing, absorbent mat, access sheath kink resistant ureteral access sheath with hydrophilic coating. flexible, single tapered tip design to reduce trauma to the scope during insertion and dilation, should have radiopaque marker band for fluoroscopic confirmation. single latch hub for single handed operation without rotational alignment. dual durometer dilator to reducer buckling and facilitate placement in tortuous ureters. length of the access sheath should be 28cm/36cm/46cm. should be available in size 11/13, 12/14, 13/15., accessories (tubings, humidifier chamber, nasal prongs) for resipicare high flow nasal oxygen therapy adult and pediatric, accessories compatible for probes of mindray monitor (i) lncs disposable probes (ii)ecg cable (iii) spo2 extension (iv) masimo probe (v) ibp cable with transducer (v) etco2 sample line (vi) eeg cup electrode (vii) temprature probe (viii) nibp hose (ix)nibp cuff (x) battery., acd solution bag 500 ml, acrylic powder (for cranioplasty), acrylic repair material, active life bag with clip, active life one piece drainable cut to fit pouch with stomahesive skin barrier with one sided comfort panel & tape collar-19mm to 64mm, adhesive felt pad 5x5cm, 10x10cm, adhesive remover spray consists hexamethyldisiloxane and cyclonentasiloxane silicone polymer for easy removal of the base plate. alcohol and sting free. neutralize odour with lemon grass formulation., adhesive silk tape all sizes, adhesive suture less securement device for stabilization of vascular access devices. the devices should have a sliding post retainer and a pigtail clip for holding the catheter lumen and should be sterile latex-free, non-absorbent with breathable pads., adhesive tape (silk based cloth) 3", adhesive tape cloth 3" , 100mm linear cutter blue cartridge/ reload for 1.5mm closed staple height enabled with 3d staple and tissue gripping technology to stabilize the tissue with anti tissue slippage groves, compatible with stapler which has curved anvil and locked halves, 100mm linear cutter green cartridge/ reload for 2mm closed staple height enabled with 3d staple and tissue gripping technology to stabilize the tissue with anti tissue slippage groves, compatible with stapler which has curved anvil and locked halves, 2-octyl cyanoacrylate 0.5 ml quantity for skin closure up to 15 cm incision., 3d acetabular shell, 4mm cutting drill compatible with spine endoscopy drill system, 4mm diamond drill burr compatible with spine endoscopy drill system, 5mm laparoscopic shear with 15mm curved coated blade, 360 degree rotation, capable of cutting, sealing, grasping, and coagulating blood vessel upto and including 7mm in diameter, having advance hemostasis mode and compatible with generator installed in institute through tender process, available in sizes 23cm, 36 cm, 45cm, with the next-generation adaptive tissue technology algorithm, improved pad life, and improved temperature management for enhanced tissue protection., 5mm laparoscopic shear with 18mm curved coated blade, 360 degree rotation, capable of cutting, sealing, grasping and coagulating blood vessels upto and including 7mm in diameter, with integrated transducer, having advance hemostasis mode and compatible with generator installed in institute available in sizes 36 cm, 20 cm compatible with generator installed in the institute., 60mm linear cutter blue cartridge/ reload for 1.5mm cl

Central Government/Public Sector

CTN :45610854

29 Jun, 2026 NA

Chandauli - Uttar Pradesh

Tender For supply of stop' plate on boom 600mm dua 'stop' plate on boom with signal red power coating and reflective tape "stop" sign along with 4 nos red reflective squares as per rdso/spn/208/2012. [ warranty period: 30 months after the date of delivery ] ]

CTN :45601961

29 Jun, 2026 NA

Parganas - West Bengal

Tender For c. g. i. (corrugated galvanised iron) sheet with zinc coating of 120 g. s. m and 0.8 mm thick, as per is

CTN :45605186

02 Jul, 2026 2.75 Crore

Kondagaon - Chhattisgarh

Tender For supply of furniture and internal fitouts for permanent campus of jnv kondagaon (chhattisgarh) - discription of work, school building, (a) classroom, (i) classroom desk large sizesupply & installation big desk (for two persons)-the overall dimensions of desk will be 1066mm * 930mm * height 760mm, complete as per specifications enclosed and direction of engineer-in- charge having the table top shall be made up of 18.0 mm thick plywood is 303 of mr grade osl (one side shall be laminated, and other side shall have balancer finish). table top dimensions shall be w 900 mm x d 380 mm. edge towards bench shall be post formed with round edge. the remaining three edges must be sealed with 2mmthick pvc edge banding tape. edge band must be trimmed on edges and corners. the desk shall be have low chemical emission of vocs (voltage organic compounds) and carcinogens, contributing to a healthier room environment. seat and back rest shall be made of 18mm thick plywood of mr grade osl (one side shall be laminated, and other side shall have balancer finish) except back rest. back rest shall be have both sides colour lamination.technical details of seat and back rest are mentioned below:seating bench dimensions shall l 930 mm x w 300 mm. front side shall be rounded with post forming. remaining three edges shall sealed with 2mm thick pvc edge banding tape.back rest dimensions shall l 930 x h 200 mm upper side shall be rounded with post forming remaining three edges shall be sealed with 2mm thick pvc edge banding tape. desk shelve shall be made of prime quality 0.8mm thick crca sheet of h150mmxd300mm and side stiffeners of crca tube size 19mmx19mmx1mmthick. one vertical support (partition) of square tube size 25mm square x1.2mm thick must be provided at centre of tray . upper modesty made of prime quality 0.8mm thick crca sheet powder coated should be embossed with dimples in round shape, height will be 150mm, there should be perforated lower modesty made of prime quality 0.8 mm thick crca sheet of size h150mmxd21mm with square perforation, crca tube of size 19x19x1mm thick to be inserted for full length at bottom of jali . bag hook should be provide on both side of piller made of minimum 4mm dia rod side frame structure:- made of prime quality crca pressed form section 165mmx25mmx1mm thick welded to 25mmx50mmx1.2mm thick crca tube , seat and back side frame structure made of prime quality crca pressed form section 165mmx25mmx1mm thick welded to 25.4mm diameter x 1.6mm thick erw-1pipe , there will be 8no. horizontal supports are 25mmx25mmx1.2mm thick crca pipes. .bottom rectangular tube 50x25x 1.2mm thick should be closed with ppcp cap bothside sand pipe dia. 25.4x1.6mm thick should be closed with metal (backside) and other side (undertheseat) ppcp cap, complete as per engineer incharge desk should be in semi knock down form with the help 16 connecting pipes ; 8 pipes on each side : connecting pipe size will be 20x20x1.2mm .all metal pieces shall be welded properly strongly and conformity with regulations with co2 welding shall be used , crca metal shall be coated after being treated with at least three stages and cleaned from oil , grease , dust and other dirt using special thermal control coating for metal furniture to form a layer of base coating of (iron phosphating) (0.4 0.8) gm/m , automatic spray coating shall be applied to be followed by a drying process in a thermal furnace with suitable temperature and time for the process , metal pipe & 7 tank treatment with minimum 45-50 micron powder coating., (ii) classroom desk medium sizesupply & installation medium desk (for two persons)-the overall dimensions of desk will be 900mm w 5 x 890mm d 5 x 688/420mm h 5 , complete as per specifications enclosed and direction of engineer-in- charge having the table top shall be made up of 18.0 mm thick plywood is 303 of mr grade osl (one side shall be laminated, and other side shall have balancer finish). table top dimensions shall be w 870 mm

CTN :45586220

27 Jun, 2026 NA

Murshidabad - West Bengal

Tender For supply of measuring instrument for inspection and quality checking of materials of different major rli scheme berhampore-i (a-m) division - tubular vernier inside micrometre extension rod type 50-1000mm range, 8 pc extension rod least count 0.01mm ( mitutoyo brand), s.s pi tape 28 mm to 300mm, least count 0.02mm ( pi tape brand), s.s pi tape 300mm to 600mm least count 0.02mm ( pi tape brand), outside micrometre, range 0-25mm least count 0.01 (mitutoyo brand ), vernial caliper 0-200mm least count least count 0.02mm (mitutoyo brand), coating thickness gauge meter (electrocoat brand), oscilloscope for solar vfd ( hand held type) suitable for 415 volts (sky king brand), auto level with heavy duty aluminium double lock tripod stand and 6m levelling staff (sokia brand), laser type digital techometer (generecbrand), digital power clamp meter (sigma brand), meger digital type 1000 volt insulation tester (sky king brand)

CTN :45420683

22 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For bid to ras supply of galvatume aluminium zinc coating gi based corrugated steel sheet 0.80 mm thick an colour having a tensile strength 550 mpa of size 10 feet x3 feet make uniix jindal mectec or eqv brand , ppgi ridge sheet of 0.80mm thick of 90cm wide of make sail tata jindal incl treating galvanised surface , self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos per pkt , hdpe sand bags og colour of size 0.75x0.375x0.15 , door size 3.0x2.10m double leaf ms sheet for door 2mm thick frame as specified , door size 1.80x2.10m double leaf ms sheet for door 2mm thick frame chowkat made of steel equal angle iron 55x55x6mm isi grade , ventilator with grill of size 600x400 mm ventilator loop hole frame for steel angle of size 35x35x5mm isigrade , gate size 3.0 mx 2.0m double leaf frame made of anlgeiron 75x 75x6mm isi grade with shutters made of reinforemnt tmt bar 12 mm dia flat iron for stiles , anti corrosive red oxide zinc chromate primer conforming to is 5-2004 make berger nerolac asian or equivalent , white lime , waterproofing compound make pidilite dr fixit fevicol or equivalent , cement based paint snowcem of make berger nerolac asian or equivalent , cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112-1989 make birla gold ambuja ultratech acc jk dalmia or equivalent , brick sub class b , three phase 1.2 hp monoblock pump 430 volt complete with and incl 3 mtr length required size flexible suction pipe , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal head screw , aluminium strips 25 x 3.0 mm , galvanized iron strip 32 x 6 mm , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings, drilled with 2 nos holes for 6 mm dia near one side , charcoal , salt normal , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm 3 mm thick with ms frame. , nut bolt 6mm dia 30 mtr dia with check nut and washer , gi pipe 40mm dia mtr 2.5 mtr make jindal tata kalinga , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make presto polycab finolex , wall vertical non woven geotextile 500gsm as separation layer between wall pvc membrane with provision of pvc disk anchor faster , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc p water proofing membrane thickness 2 , non woven geotextile 500gsm as protective layer of pvc waterproofing mebbrance with provision of high quality adhesive , floor horizontal non woven geotextile 500gsm as separation layer between foundation and pvc membrane , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc-p water proofing membrane , non woven geotextile 500gsm as protective layer of pvc for pvc membrane , deck slab horizontal non woven geotextile 500gsm as seperation layer between deck slab and pvc membrance , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc p water proofing membrane thickness 2 , non woven geotextile 500gsm as protective layer of pvc waterproofing mebbrance with provision of high quality adhesive for non woven geotextile 50gsm , high quality adhesive for termination of pvc water proofing membrane at doors ventilators , cement opc 43 grade packed in hdpe bag each 50 kg wt for retaining wall 40.00 mtr x 3.00 mtr height 8 mtr x 3 mtr x 5 nos 40 mtr , coarse sand free from vegetation confirming to is 650 1991 , coarse aggregate 40mm graded confirming to is 383 2016 //bid details 2 / 47 , stone boulder 9 inch to 12 inch , pvc pipe 75mm dia 3 mtr long

State Government

CTN :45595794

08 Jul, 2026 9.94 Lacs

Doda - Jammu And Kashmir

Tender For repair and renovation of hospital at base camp including procurement of lab instruments chanderkote. - demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of engineer-in charge:1:3:6 or richer mix (i/c equivalent design mix), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), providing upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead with cement mortar 1:4 (1 cement : 4 fine sand), providing and laying ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to is: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. in colour such as white, ivory, grey, fume red brown, providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete size of tile 600x600 mm, providing and fixing ply wood 5 ply with commercial ply on both faces 6 mm thick, dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : upto 10 mm thick, providing and fixing wooden moulded corner beading of size 50x50 mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete. second class kail wood., providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :budloo / fir wood., providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws. first class kail wood 30mm, providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 2nd class teak wood beading 62x19 mm, providing and fixing aluminum tower bolts isi marked anodized (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10mm, providing and fixing aluminum handles isi marked anodized (anodic coating not less than grade ac 10 as per is: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 liter low level white p.v.c. flushing cistern,

Zinc Coating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

State Government