Latest zinc coating Tenders | Government zinc coating Tenders

corporations/Associations/Others

CTN :45723719

13 Jul, 2026 21.51 Lacs

Kasaragod - Kerala

Tender For material supply for the installation of 4 line hanging solar power fence at rajapuram estate - hanging solar power fence, p.p reel insulator , must be of virgin plastic metirial. polypropylene or equivalent with break down voltage of 15 kv(weight 25gm avg, length 4.6 cm avg), strain insulator, must of poly polypropylene plastic rated for 15 kv uv stabillized ,(weight 40 gm avg, length 7 cm avg), gi post 12 feet , 2" gi pipe, 14 guage thickness,total 14.5 ft length modified to 12 feet length and cut and welding to 90 degree bend 2.5 feet length at top end and having diametrically opposite holes of size 6 mm at end of bend pipe, intermediate post (t angle post) , 6ft., painted(25mm*25mm*3mm)having holes of size 6 mm at required interval of fencing installation, supporting post, 10ft.,gi-1,14 guage thickness,painted, stay (t angle), 2ft., painted(25mm*25mm*3mm), 12 swg ht wire, 12 guage,2.5 mm dia high tensile wire with zinc coating for use as conducting wires,binding strain insulator, 14 swg binding wire , high quality zinc coating wire for binding reel insulator, tighing support post with corner post, 1.5 mm stainless steel wire rop 304 grade, aluminium ferruel, aluminium ferruel 3 mm, wire tightner , permanat wire tightner made of special aluminium alloy designed for kv, uv stabillized, earth rod, copper plated earth rod 14 mm -3ft. length, earthing compound, earthing compound 8 kg, gate handle, gate handle and spring assembly, handle made of polyethylene, leadout cable,leadout cable for fence system double insulated gi cable inner core wire 2 sq.mm.hot dipped galvanised steel core, capaie of with standing 15kv should be provided to prevent bimetal salt formation at connections, single core 2.5 mm sq. cable, 2.5 mm2 single core copper cable for connecting the solar panel to the tubular battery through charge control unit with required terminal sockets,nut and bolt,washer, lightning diverter, 15kv -50kv rod gap arrester,must be capable of diverting stray lightning and adjustable for spark gaps adequate earthing to be provided, 100 watt solar panel, 100 watt/12 volt and above poly cristalline with 10 year warranty having iec/mnre certification, charge control unit, 20 a,12/24 pwm charge controller unit of standard make suitable to control the charging of the tubular battery, energizer, energizer with 10 kv output safety standards to be followed are bis 302-2-76 iec60335-2-76. switch-high, medium and low power setting., fence alarm system, fence alarm system covering area of 1.5 km, solar panel sapporting stand with metal box painted (for battery and energiser), 18 guage thickness metal box(lockable). gi-sheet, painted should be capable of housing battery, charge controller and energizer and fixed with reguired clamps and nut and bolt on solar panel suppoert stand made of gi pipe of 50mm diamere and b class type with suitable arreangement for holding the panel, warning sign, polyethylene plastic with satuatory wrning with signs, tubular battery 12v , 100ah, 12 v, 100 ah c10 rating with full 5 year replacement warranty (tower battery) for energising the energiser

Central Government And Public Sector

CTN :45709644

06 Jul, 2026 NA

Dibrugarh - Assam

Tender For supply of m16 x 60 high tensile hex head screw, specification as per is:1364(part-2)-2002,ce-with property class-10.9 to is:1367(part-3)-2002 and is:1364(part-1)-1992- with property class-10.9 , zinc coating as per mdts-057. make: unbrako/tvs/dfl/tuff/pooja forge only. [ warrantyperiod: 30 months after the date of delivery ] ]

CTN :45703919

06 Jul, 2026 NA

Kinnaur - Himachal Pradesh

Tender For supply of puf panels 60 mm , puf panel 40mm , pre painted galvalume aluminum zinc coating gi based corrugated steel sheet 0 point 80mm , verandah cover with aluminium partitions with 5 point 5 mm thick plain glass , ismb , hollow iron , angle or flat iron or base plate , ms sheet , tmt bars , nut and bolt , upvc door , upvc window 1200 x 1200mm , upvc ventilators 450 x 300 mm , fire extinguisher ball 1 point 30kg , curtain rod of size 1 point 30 m , steel almirah , smart ortho mattress , foot scraper , iron foot mat , white cement , looking mirror , double bunks ms tubes , floor mounted hot and cold water dispenser , bed side table , puf tank 2000 ltrs , plastic dustbins , stainless steel shoe rack , sealing material , laminated wooden floor , tactical heater diesel based , solar light , septic tank 3000 ltrs , ordinary portland cement , coarse sand , stone aggregate 20mm , stone aggregate 40mm , stone aggregate 10mm , vitrified tiles , non skid tiles , stone aggregate 63mm , mcb distribution board db 12 way , mcb sp 32 amps , mcb sp 16 amps , mcb single pole 100 amps , mcb sp 10 amps make , lt panel feeder box , die casted bulk head 8 watt , 16 amp modular switch and socket combination , 16 by 6 amp modular switch and socket combination , modular piano switch 6 amp modular switch , modular piano switch 16 amp modular switch , 16 amp modular socket , modular gang box 12 way , modular gang box 06 way , modular gang box 04 way , modular gang box 03 way , led tube light fitting 4 feet , led tube light fitting 2feet , electric geyser 25 ltr , wire flexible , 1100 v grade frls , pvc insulated unsheathed copper cable 4 sq mm , 1100 v grade pvc insulated pvc , pvc insulated unsheathed copper cable 6 sq mm , earthing , lightening arrester , gi screw 8 mm x 45 mm full threaded 500 nos , gi screw 8 mm x 25 mm full threaded 500 nos , gi screw 8 mm x 75 mm full threaded 250 nos , pvc insulation tape 19mm , cp bib cock 15 mm , cp pillar cock 15 mm , cp stop cock 15 mm , cp soap dish , cp towel rail 24 mm dia 600 mm , vitreous china ceremic floor mounted anglo indian water closet toilet seat , vitreous china bowl urinal flat back , ss garting 100mm dia , vitreous china wash hand basin , cp health faucet with fixing screw , pvc pipe 110 mm , pvc y by t junction 110mm dia , pvc socket 110 mm , pvc swr bend 110mm , pvc floor trap 75mm , pvc pipe 75mm , pvc elbow 75mm , pvc door bend 75 mm , pvc bend 75 mm , pvc shoe bend 75 mm , pvc t 75mm dia , looking mirror 450 x 600 mm , sealing thread

CTN :45696784

06 Jul, 2026 10.00 Lacs

Kuchaman - Rajasthan

Tender For digital library in shree kuchaman pustakalay. kuchaman city - computer system setup (includes cpu, monitor, keyboard, mouse and accessories) cpuintel core i5- 08th gen processor with activated windows having 8 gb ram, 512 gb ssd, 450w power supplymonitor18" led 45 htz display having hdmi and vga portmouse and keyboardwired optical mouse and wired full numerical pyhysical keyboard(made of dell/lenovo/hp/asus), furniture counter (including table and chair) per personcounter: comfortable size for 20 persons having 32" heightchair: adjustable height wheel movable chair, air conditioners, split acs 1.5 tonwith installation and stabilizer(made of voltas/lg/samsung/lloyd), wi-fi router and internet connectionmulti network wi-fi router having high internet speed minimum 300 mbps, providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from m.s. sheet and galvanised in accordance with zinc coating of grade 350 as per is : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to g.i. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to g.i. channel with connecting clips made out of 2.64mm diax230mm long g.i. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cut-outs made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the engineer in-charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum board conforming to is: 2095-part i,, brick work with modular fly ash lime bricks (falg bricks) conforming to is:12894-2002, class designation 100 average compressive strength in super structure above plinth level upto two stories in : cement mortar 1:6 (1 cement : 6 coarse sand), cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:6 (1 cement : 6 fine/ coarse sand), distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including priming coat with cement primer., providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete, p & f 1st quality heavy duty vitrified polished digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absorption less than or equal 0.08% and conforming to is 15622 of approved make in all colour and shade, laid with 20 mm thick cm 1: 4 including grouting the joints with white cement and matching pigment etc complete. size 600 mm x 1200 mm, providing and fixing fully panelled /partly panelled double leaf shutters frame for windows and ventilators as per approved design and drawings with approved steel fittings as per annexure a and width of styles, bottom and top rails 75mm including intermediate rails 50mm wide

State Government

CTN :45411968

29 Jun, 2026 35.00 Lacs

Doda - Jammu And Kashmir

Tender For corrigendum : construction of engineering workshop and testing lab including procurement of lab instruments at dam site of bhep. - earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed ordinary rock, 1 meter from cutting edge, providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size), steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level thermo-mechanically treated bars of grade fe-500d or more., filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m., centering and shuttering including strutting, propping etc. and removal of form work., lintel, beams, plinth beams, girders, bressumers and cantilevers., columns, pillars, piers, abutments, posts and struts., structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. welded, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing ridges or hips of width 60cm overall width plain g.s. sheets fixed with polymer coated j. or l hooks, bolts and nuts 8mm dia g.i. limpet and bitumen washers complete. 12.4.3 0.50 mm thick with zinc coating not less than 275 gram/m2, painting on g.s sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on new work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution., brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :cement mortar 1:6 ( 1 cement : 6 coarse sand), extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level, 15mm cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand), providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 12 mm mild steel u beading, p/f in existing frames 30mm th

CTN :45484439

26 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For bid to ras supply of supply installation testing and commissioning of 58.5 kva under job no 2561 as per store list att , cement 43 grade opc packed in hdpe bag each 50 kg wt conforming to is 8112 1989 , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , hard core 40 to 63 mm graded , stone for rr masonry less than 6 inch , pre painted galvalume aluminum zinc coating gi based corrugated steel sheet 0.50 mm thick an colour having a tensile strength , ms pipe med grade 50mm dia confirming to is 1611 1998 , painting brush 4 inch , anti corrosive red oxide zinc chromate primer , synthetic paint enamelled og , thinner , self driving screw for ppgi sheet , iron welding rod , mcb spn 240 volts 32 amps , mcb sp 6 to 32 amps , pvc tape 19mm wide 5m long , on load change over switch within sheet steel enclosure , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of , cable xlpe insulated screened pvc bedded galvanised steel strip or wire armored electric power cable heavy duty 1100 volts grade , switch piano 5 amp 230 volts flush type one way , switch socket combination , led tube light fittings 15w 230v box type 4 feets with crca body pre coated white and prewired for led tuble complete , screw full thread 6x19 mm isi marked , pvc switch board snow white of size , ceiling rose three terminal , pvc round squire block , distribution box 4 way double door spn 240 volts copper bus bar and neutral link earthing stud , service cable pvc insulated aluminium conductor 1100 volt grade heavy duty served with inner sheathing of pvc tap and overall pvc sheathed , earthing plate 600x600x6mm galvanised steel suitable for gi strip fittings, drilled with two nos holes for 6 mm dia near one side , ci earthing pit cover of size 300x300x6mm with angle iron isa 20x20x3mm thick ms frame , funnel fitted with 20mm dia gi pipe 1.5m long , galvanized iron strip 32 x 6 mm , charcoal , salt normal , cement 43 grade opc packed in hdpe bag each 50 kg wt //bid details 2 / 32

CTN :45484463

26 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For bid to ras supply of amps make havells l and t standard isi equivalent , pvc tape 19mm wide 5 m long make steelgrip anchor kinjal isi equivalent , cable pvc insulated electric cables heavy duty 1100 volts grade multi standard copper conductor of size 1.5 sqmm single core frls confirming to is 1554 , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 4 sqmm single core frls confirming to is 1554 part 1 1988 , pvc casing capping of size 3 oblique 4 medium grade snow white make anchor ssk cona , switch piano 5 amp 230 volts flush type one way snow white make anchor ssk cona isi equivalent , led tube light fittings 15w 230v box type 4 feets with crca body pre coated white and prewired for led tuble complete make havells bajaj philips cromption isi equivalent , screw full thread 6 x 19 mm isi marked 200 nos pkt , pvc switch board snow white size 7 inch x 4 inch for sockets and switches db make supreme polycab finolex isi equivalent , pvc switch board snow white size 8 inch x 10 inch for main switches db make supreme polycab finolex isi equivalent , pvc l bend and t junction joint for pvc casing and capping confirming to is 3419 part 3 make supreme polycab finolex isi equivalent , switch socket combination snow white multipurpose 2 in 1 15 amp 230 volts make anchor ssk cona isi equivalent , service bracket 40mm dia gi tubing medium grade 1.5 mtr long make jindal tata kalinga isi equivalent , cement 43 grade opc packed in hdpe bag each 50 kg wt conforming to is 8112 1989 birla gold ambuja ultratech isi equivalent , coarse sand free from vegatative materials , coarse aggregate 20mm graded , coarse aggregate 40mm graded , hardcore 63 to 90mm , mild steel framed work such as truss rafter purlins and ms plate make tata sail jsw isi equivalent , mild steel bars of size 6 to 8mm dia conforming to is 432 part i 1982 make tata sail jsw isi equivalent , mild steel bars of size 10mm and above dia conforming to is 432 part i 1982 make tata sail jsw isi equivalent , the pre painted galvalume aluminium zinc coating gi based corrugated steel sheet 0.50 mm thick an colour having a tensile strength 550mpa of size 10 feet x 3 feet , the pre painted galvalume aluminium zinc coating gi based plain steel 0.50 mm thick an colour having a tensile strength 550mpa. , mild steel self drilling screw with washer size 3 inch isi marked 100 nos per pkt , anti corrosive red oxide zinc chromate primer confirming to is 5 2004 make berger asian nerolac isi equivalent , synthetic paint enamelled black confirming to is 5 2004 make berger asian nerolac isi equivalent , painting brush 3 inch isi marked , ms nut and bolt of length 100 mm fully thread , ms nut and bolt of length 0.45 m 12 mm dia nuts and washers for fdn bolt , iron welding rod confirming to is 814 2002 isi marked 3.15mm thick 100 nos per pkt , ms binding wire panel radiator: supply of wall mounted steel panel radiators of heat output of 3200 kcal/hr,colour), baked in high gloss finish with and including all necessary fittings as per ne 442 standards , m.s made radiator has both core and tank made of mild steel. the radiator supplied should transfer heat from the fluid inside to the aire outside. the radiator will have thermostat control sensor to control the room temparature, make: eurotherm/maktek/bharat works/isi equivalent., boiler: supply of vertical fire tube boilers (heat output of 50000 kcal/hr) (58.02 kw/hr) with stainless steel dampers. the boiler will run on hsd/kerosene and will be rated as per the heat load calculation. the presure rating should be upto 160 pai. now //bid details 2 / 35

Private Sector

CTN :45180384

24 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For bid to ras supply of 1, 500 nos. of galvanised metal boxes (gmb's) of 0.80 mm thickness steel with 120 gsm zinc coating

corporations/Associations/Others

CTN :45633269

30 Jun, 2026 43.90 Lacs

Modasa - Gujarat

Tender For supplying of pipe line materials for annual year 2026-27 for modasa nagarpalika modasa (arvalli) = manufacture, supply & delivery of electric resistance welded (up to 400mm)/submerged arc welded(above 400mm) m.s.pipe having beveled ends plate or coil conforming to is- 3589-2001 or its latest revision/ ammendment for following thickness outside diameter at gwssb store or site anywhere in gujarat state including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to departmental stores, stacking etc. all complete. (rate for ms pipe based on the ex. works price of hr coil as rs.58500 per mt - withouth gst (above 3.15 mm to 10 mm) & rs. 59000.00 per mt without gst , providing and supplying d.i. k-9 grade pipes for following nominal bore diameter with internal cement mortar lining including all taxes, insurance, transportation,freight charges, octroi, inspection charges, loading, unloading conveyance to departmental stores, stacking etc. all .complete(is 8329-2000) rate for di pipe based on wholesale price index of pig iron as 149.2 for the month of jan-2022 for sewerage project cement mortor lining shall be with sulphate resistance cement , providing and supplying in standard length , isi mark rigid unplasticised pvc pipes suitable for portable water with ring fit joint including cost of rings, asper is specification no. 4985/1988 including all local and central taxes , transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores and including cost of jointing meterial etc. complete , providing and supplying in standard length , isi mark high density polythlene h.d.p.e. pipes suitable for potable water as per is specification no. 4984/1995 incliding all local and central taxes , transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores etc . comp. (1) rate for hdpe (pe-100) pipe based on the rate of hdpe resin as rs. 121185/mt (price without gst)10.0 kg/cm2 , providing and supplying isi mark g.i. pipe with coupling of following class and dia. including all texes, insurance,transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to departmental stores, stacking etc. all .complete (is -1239)( not for well / tube well column pipe) , ms specials 7.1.a. ms specials plain and socket ends up to 300 mm dia, above 300mm dia. 7.1.b. ms specials flanged ends up to 300 mm dia, above 300mm dia. , d.i. specials manufacture, supply and delivary of ductile iron flanged scoket ,spigot bends, tees, reducers or any other specials as per bs- en 545/1995 class-a series k12 suitable for use with d.i. pipes manufactured as per is. 8329/1994 delivery of specials is to be made to gwssb store or site of works any where in gujrat including all taxes, loading, unloading, carting, stacking, insurance, inspection charges , octroi etc complete. with external bitumen and zinc coating and internal cement mortar lining , pvc fittings providing and supplying at store or site of work including all taxes, loading, unloading, carting, stacking, insurance, inspection charges , octroi etc complete. , c.i.d. joints manufacture , supply and delivary of cast iron detachable joints short and long) complete with joint flanges duly drilled synthetic rubber sealing rings manufactured from styene butadine (sbr) and other required accessories such as nut, bolt etc. conforming to is specification 8794-1988 or its lastest revision if any suitable for use with a.c. pressure pipes, pvc pipes and d.i. pipes delivary of joints including its accessories including loading, unloading, carting, stacking, insurance. all taxes, octroi etc. complete. , slice valves providing and supplying isi mark ci d/f sluice valves as per is :14846 ( latest edition) of following class and diameter including all , taxes, insurance, transportation, freight charges, octroi, inspection char

Central Government/Public Sector

CTN :45617172

01 Jul, 2026 NA

Haridwar - Uttarakhand

Tender For tender for supply of fastnrs as per - hexagon socket head cap screw m6x12 - is 2269 , materialsteel property class 8.8 as per is 1367(part 3) , finish-zinco nickel size- pn-210004591 , hexagon socket head cap screw m5x20 - is 2269 , materialsteel property class 8.8 as per is 1367(part 3) , finish-zinco nickel size- pn-210004565 , hexagon head bolt , m14x1.5x60 as per is 1364(1) , material - 8.8 as per is 1367(3) , finish - zinco nickel n.std-is-1364 size- pn-210004793 , hexagon head screw full threaded m14x45 as peris-1364 (part-2)/iso- 4017/din-933 / uni 5739 , material property class-8.8 , finish- zinco-nickel , dimension , tolerance and other technical details as per governing standard size- pn-210003987 , stud m14x35 as per is- 1862 type -b/ uni-5911 (tap/metal end -1.5d) , material- steel property class 8.8 as per is-1367 (part-3) , coating- zinco-nickel , dimensions , tolerances and general requirements as per governing standard n.std-is-1862 size- p/n 212864183 , stud , m6x16 , type-c as per is-1862 , material- steel property class 8.8 as per is 1367(part-3) , finish- zinco- nickel n.std-is-1862 size- p/n 212865681 , hexagon head bolt m10x65 as per is 1364(part-1) , material- steel property class 8.8 as per is 1367(part-3) , finish- zinco- nickel n.std-is-1364 size- p/n 212803406 , flat washer for round slotted screw with outer dia 14 , inner dia 8.4 , thickness 1.6 as per uni 6592 material -teflon n.std-uni 6592 size- pn-210078356 , serrated washer , 8.7x13.5x2.5 (for bolt size- m8) mat-steelen 1.7182 or eqvlnt. hardness greater than 465 hv1 , zincflake coating , tolerance and gen. terms as per spec-gt04004 (as applicable for material- st-zn) , model no- nl8 of nord lock or eqvlnt. size- p/n-210007776 , serrated washer , 8.7x16.6x2(for bolt size-m8) , mat-stainless steel-en 1.4404 (aisi 316l)or eqvlnt.hardness greater than 520 hv0.05 , surface hardened , model no- nl8spss of nord lock or eqvlnt. size- pn-210007763 , serrated washer , 10.7x16.6x2 (for bolt size m10) material- steel-en 1.4404 or eqvlnt. hardness greater than 520 hv0.05 , model no-nl10ss of nord lock or eqvlnt. size- pn-210007790

Zinc Coating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government And Public Sector

State Government

Private Sector

corporations/Associations/Others

Central Government/Public Sector