Latest zinc item Tenders | Government zinc item Tenders

Central Government/Public Sector

CTN :40060873

15 May, 2025 NA

Multi City - Multi State

Tender For supply of set consisting of 1) frame for stacking ramp as per drg. no. rdso/cg/drg/21013, qty.: rh-01 no. & lh - 01 no.2) ramp assembly for side entry door as per drg. no. rdso/cg/drg/21052, qty.: - 02 nos.item to be supplied with red oxide zinc chromate primer coating.

Central Government/Public Sector

CTN :40040729

05 May, 2025 NA

Bhusawal - Maharashtra

Tender For supply of syp zinc 20 mg/ml [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ]

CTN :40041508

12 May, 2025 NA

Gorakhpur - Uttar Pradesh

Tender For supply of angle as per drg no mi006813 alt a or latest upto the date of tender opening. item to be su pplied with red oxide zinc chromate primer coating. [ warranty period: 30 months after the date of deli very ]

Central Government/Public Sector

CTN :40028078

25 Apr, 2025 NA

Kalka - Haryana

Tender For supply of hex head screw m20x65- 10.9 as per iso 4017/is:1364 part-2, zinc electroplated to grade a3l of annexure-e of is:1367(part-11).packing instruction: as per standard packing. it sho uld be ensured that item should not rub during transportation. the item should be packed with adequate strength.transit damage , if any , shall be at the cost of supplier [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39920497

21 Apr, 2025 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : supply of miscellaneous fabricated items - bend pipe sub assly to drg no 37184905033 rev-03,var00. , silincer flap cover (spp loco) to drg no.27184905005 rev-05.v-oo. , pipe support channel to drg. no. 47184905009, rev-03, item- 1. , silencer clamp sub assy.to drg no. 27184905009,r-02,v-00. , pipe support channel as drg no. 37184905024, r-02. , silencer clamp as drg no. 37184905027,r-02. , fuel tank adopter to drg. no. 37185001000,rev 03. , bracket plumber block mtg(sn510). to drg no. 27183205106,v-00,r-02. , stool for ag to drg no. 27188714014, v-00, rev-03. , special bolt ( 5/8") for radiator to drg no. 47188801041,rev-00. , brake adjusting screw to drg no 37181901012,r-04,v-00. cadimium plated (cpp) or zinc plated (zpp). , distance piece (for brake pull rod) drg.no 37181901008r-07,it-01. , steel plate for pull rod to drg no. 37181901038.rev 00. , hanger cross tie sub assy. drg: 27181901006,rev-02,var-00. , brake adjuster block sub assly to 27181901014 rev 06 var 00. , chain assly (for dee shackle)to drg no 37193804000.v-00,r-02. , hook st. bar dia 6 mm to drg. no. 47181904002, item-01. rev-02. , pulley arrangement. each set consists : 1. pulley as per drg 27183205107 rev 03 - 1 nos 2. retaining plate as per drg 47183205000 rev 03-2 nos. , pulley mtg arrangement as per drg 27183205010 rev 00 it 1,3 and 9 (qty of eac h item shall be as mentioned in the drg against the sl no 1,3 and 9) , check plate, mtg bkt and bolt . each set consists of following: 1. radiator holding arrangement as per drg 37188705024 rev 03-2 nos 2.mtg pad for radiator holding as per drg 47188705016 rev 01-2 nos 3.shear chk pt for ag as per drg 47 188705025 rev 01- 2nos 4.shear chk plt for alt as per drg 47188705024 rev 01 - 8 nos 5. jacking pad as per drg 47183205009 rev 01 -16 nos 6. shear chk bolt as per drg 47183201101 rev 02-4 nos" , safety guard for compressor as per drg 17185605006 rev 00. , safety guard as per drg 27185605010, rev 02. , "air cleaner assy. each set consists of following: 1. angle sub assy for air cl eaner a s per drg 37188705028 rev 01-2 nos 2. bkt for air cleaner as per drg 37188705026 rev 01-4 nos 3. air cleaner support bkt aub assy as per drg 37184905083 rev 00 var 00 -1nos" , "locking plate and washer. each set consists of following: 1. locking plate a s per drg 47188805006 rev 00 it 01-4 nos 2. locking plate as per drg 47188805006 rev 00 it 03-3 n os 3. plate washer as per drg 37188805016 rev 01 it 03-8 nos 4. plate washer as per drg 371888050 16 rev 01 it 02-8 nos" , "engine mtg bkt. each set consists of following: 1. engine mtg bkt front end rh a s per drg 17183219014 rev 04 var 00 -1 no 2. engine mtg bkt front end lh as per drg 17183219013 rev 03 var00 - 1 no 3.engine mtg bkt rear end rh as per drg 17183219012 rev 03 var 00 - 1 no 4. engine mtg bkt rear end lh as per drg 17183219012rev 03 var 01 - 1 no , "blower mtg duct. each set consists of following: 1.blower mtg duct front end as per drg 17183205006 rev 03 var 01-1 no 2.blower mtg duct rear end asper drg 17183205010 rev 1 0 var 00-1 no" , mtg pad for alternator as per drg 2 7188705007 rev 01 var 00. , radiator support and mtg arrangement. each set consists of following: 1.ra diator duct support assy as per drg 27188705020 rev 03 var 00- 3 no 2.radiator mtg bkt assy as per drg 27188705012 rev 02 var 00-4 no. , "set of special bolt for brake rigging. each set consists of follo wing: 1. spe cial bolt as per drg 47181901046 rev 00 it 01-8 nos 2.special bolt as per drg 47181901046 rev 00 it 02-8 nos 3. special bolt as per drg 47181901004 rev 03 it 01-8 nos" , outer hanger sub assy rh as per drg 27181901019 rev 01. , outer hanger sub assy lh as per drg 27181901018 rev 01. , inner hanger sub assy lh as per drg 27181905012 rev 00. , inner hanger sub assy rh as per drg 27181901021 rev 02. , frame assy of air brake console-2 scope of supplybhel drg- 27184101003 rev 00, (item no-001 to 007) , jockey pulley arrangement as per drg no. 27188801040, rev-02. ( all har dwar

Central Government And Public Sector

CTN :39978436

01 May, 2025 34.81 Lacs

Kaiga - Karnataka

Tender For supply, fabrication, welding/joining, erection and testing of hdpe piping from kgs 3 and 4 to kaiga 5 and 6 area. - supply items (schedule-a), 100 nb equal tee sch 40 astm a 234 gr. wpb sml bw ansi b 16.9, 1oo nb sorf flange 150 # astm a 105 ansi b 16.5, 100 nb blind flange 150 # astm a 105 ansi b .16.5, 100 nb gate valve manual op. flange end 125/150 # sa 216 gr. wcb ansi b 16.34, 100 nb ball valve manual op. flange end 125 /150# hdpe, suit to 100 nb,sa 105, 150 # ansi b 16..5 back ring flange, flange end mechanical type flow totalizer 150# (range 150000 to 200000 cu. mtr.capacity) to suit to 100 nb sa 105 flange 150 #, ansi b 16.5. flow meter totaliser specification, dn-110 hdpe pipe is 4984 gr. pe 80 pn 6, dn-110 hdpe 90 degree elbow, is 4984 gr. pe 80 pn 6 as per is 8008, dn-110 pipe /stub end, 1s 4984 gr pe 80 pn 6 as per is 8008., 100 nb cs back ring flange astm a 105 as per ansi b 16.5 150#, dn-110 hdpe equal tee, is 4984 gr.pe 80 pn 6, as per is 8008, dn-50 hdpe cap, is 4984 gr. pe 80 pn 6, as per is 8008., hexagonal headed bolt, nut with washer 85 mm long is 1363 gr. 6.3 /is 3757 gr. 8.8, ismc 100 is 2062 , e 250 gr. a, 12 mm thick plate is 2062 , e 250 gr. br, 110 nb ms u clamp 25 mm wide x 3.5 mm thick, 100 nb m 12 u bolt is 2062 e 250 gr. a, m 10 x 100 hst/faz, 1.6 mm thk caf gasket 100 nb is 2712 gr. w/3, erection item (schedule-b), butt fusion welding / joining and laying of dn- 110 hdpe pipe, is 4984, grade pe 80, pn 6 both under ground and above ground., butt fusion welding / joining and erection of dn-110 90 degree elbow, hdpe, is 4984, grade pe 80. pn 6 ( inclusive of welding/fusion of both end), butt fusion welding / joining and erection of dn-110 hdpe equal tee, is 4984, grade pe 80. pn 6 ( inclusive of welding/fusion of three end), butt fusion welding / joining and erection of dn-110 hdpe pipe end /stub end is 4984, grade pe 80. pn 6, butt fusion welding/joining and erection of dn-50 hdpe cap is 4984 grade pe-80 pn-6, installation of 100 nb hdpe ball valve without welding., fabrication , erection , welding, inspection,surface cleaning & supply and application of hb chlorinated rubber zinc phospate primer paint in two coats to minimum 100 micron dft and supply and application of hb chlorinated rubber finish paint in two coats to 60 micron dft for cs structural steel support and components., installation of anchores m10 x 100 mm hst/faz including handling,scafolding,labour & tools., removing & reinstallation of precast concrete slab 0.3 m (l) x 1.350 m (w) x 0.1 m (t), excavation and backfilling of excavated trenches with the soil after completion of installation of pipe lines and testing including levelling/grading, compaction to the required level 1.5 m (d)x 0.8 m (w), sand bedding 50 mm depth x 400 mm width for underground hdpe piping including supply of sand., dismantling of existing dn-50 hdpe piping including breaking of existing cement concrete ( 0.7 cub.mtr) & pcc to be done after breaking and removing of existing cement concrete, including tools, labour & disposing of unservicable material as directed by eic, carefully removing the korean grass along with soil of 100 mm to 250 mm depth and 1500 mm width including replacing the same removed korean grass along with soil after laying hdpe line along with tools & tackles,watering of grass,dressing of area etc.in all complete as per direction of eic

Central Government/Public Sector

CTN :39986113

21 Apr, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of washer to drg no. - am54128, item no. 05, rev. 10 (zinc plated & passivated min. 13 microns to aa0673603 , washer to drg no. - am54073, item no. 01, rev. 12 (zinc plated& passivated min. 13 microns to aa0673603 & , washer to drg no. - 44020542073, item no. 06, rev. 00 (zinc plated & passivated min. 10 to 12 microns to , washer to drg no. - 44020542073, item no. 07, rev. 00 (zinc plated & passivated min. 10 to 12 microns t , washer to drg no. - 44020542073, item no. 08, rev. 00 (zinc plated & passivated min. 10 to 12 microns t , washer to drg no. - 44020542073, item no. 09, rev. 00 (zinc plated & passivated min. 10 to 12 microns to

CTN :39925996

16 Apr, 2025 21.75 Lacs

Jaisalmer - Rajasthan

Tender For supply of various item for water supply system at rgtpp ramgarh.-, hdpe pipe end preparation syitable to victaulic style 905 coupling, dn 110 sdr 13.6 pe 100 wall thickness 8.1 mm to 9.1 mm as per is 4984:2016 amendment 2, fr grade (fire resistant) made with pre compounded black virgin resin., , victaulic style 905 hdpe to hdpe coupling od=110mm. housing: ductile iron conforming to astm a536, grade 65-45-12.both end with retaining ring: type 316 stainless steel. nitrile (standard or flush-seal) gasket: epdm vicplus gasket. temperature range -30f to +230f/-34c to +110c. may be specified for cold and hot water service within the specified temperature range. metric fluoropolymer coated bolt and nut., , victaulic style 907 hdpe to metal coupling od=110mm. housing: ductile iron conforming to astm a536, grade 65-45-12.one end retaining ring: type 316 stainless steel, other end as per ogs (original grooved system) compatible. gasket: epdm vic plus gasket. temperature range -30f to +230f/-34c to +110c. may be specified for cold and hot water service within the specified temperature range. metric fluoropolymer coated bolt and nut., , victaulic grooved end fittings (bend, tee & reducer) moc: ductile iron conforming to astm a536, grade 65-45-12., , 90 degree elbow od : 114.3 mm, , 45 degree elbow od : 114.3 mm, , equal tee od: 114.3 mm, , concentric reducer: 114.3 mm x 88.9mm, , victaulic flange adapter moc: ductile iron conforming to astm a536, grade 65-45-12. gasket 10/4/2024 epdm (green stripe color code). temperature range -30f to +230f/-34c to +110c., , dn 100 (od= 114.3mm), , dn 80 (od: 88.9mm), , os &y gate valve:, , body: grooved end ductile iron conforming to astm a536 grade 65-45-12., , body coating: fusion bonded epoxy, ral 3000 color - red. body gasket: epdm body bolts: zinc plated steel. hand wheel: ductile iron conforming to astm a536 grade 65-45-12.handwheel nut: ductile iron conforming to astm a536 grade 65-45-12.os&y yoke: ductile iron conforming to astm a536 grade 65-45-12.yoke nut: bronze, conforming to astm b62.bonnet: ductile iron conforming to a536 grade 65-45-12.bonnet bolts: carbon steel conforming to grade 8.8, zinc plated. bonnet/body coating: fusion bonded epoxy. stem: type 304 stainless steel., , o-ring seals: nitrile, , gate: ductile iron conforming to astm a536 grade 65-45-12, epdm coated gate nut: type 304 stainless steel. packing: graphite gland: ductile iron conforming to astm a536 grade 65-45-12.body: ductile iron conforming to astm a536 grade 65-45-12.body coating: fusion bonded epoxy, ral 3000 color - red, , body gasket: epdm. body bolts: zinc plated steel. hand wheel: ductile iron conforming to astm a536 grade 65-45-12, , hydro test pressure body:- 31 kg/cm2, , hydro test pressure seat:- 21 kg/cm2, , note: - valves should be supplied with both ends grooved & flanges compatible with grooving., , dn 100 (od= 114.3mm),

Central Government And Public Sector

CTN :39964531

29 Apr, 2025 94.65 Lacs

Chittorgarh - Rajasthan

Tender For providing of facility management services - lumpsum based - rr site 3 and 4; supply and application of one coat of red oxide zinc chromate primer and two coats of synthetic enamel paint on newly erected pipe lines for details refer boq item no 1 in scope of work..,facility management services - lumpsum based - rr site 3 and 4; supply and application of one coat of red oxide zinc chromate primer on metal surface or inside 1800 nb pipe for details refer boq item no 2 in scope of work and 01 bid quantity is equ..,facility management services - lumpsum based - rr site 3 and 4; supply and application of one coat of synthetic enamel paint over previously painted surface for details refer boq item no 3 in scope of work and 01 bid quantity is equal to 60000 sqm;..,facility management services - lumpsum based - rr site 3 and 4; supply and application of one coat of epoxy primer and two coats of epoxy (anticorrosive) paint over new erected pipe line for details refer boq item no 4 in scope of work and 01 bid qu..,facility man

Central Government/Public Sector

CTN :39933960

05 May, 2025 NA

Mumbai - Maharashtra

Tender For supply of console to drg.no. aaa11829 item-1 alt ' a ' = 2 nos. aaa11831 item-1 alt ' a ' = 2 n os. special condition : item to be packed in polythen bags and in suitable size wooden pallet. 1) all polythene bags shall be of min. 200 microns thick , sealed water tight in all sides. 2)eac h polythene cover must have identification label with list of items inside. 3)each wooden bo x shall be stenciled or rigidly nailed with identification label. 4)finished components shall be t horoughly cleaned and applied with epoxy zinc phosphate primer as per rdso/spec no.m&c/pcn/100 latest to a dft of minimum 60 microns and mdts-094 latest shall be followed. for procedure and colour sh ade excluding the areas as specified in detail drawings. 5) suitable packing to be done to prevent d amage during transit, unloading and rusting during storage. [ warranty period: 30 months af ter the date of delivery ]

Zinc Item Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors