Latest zinc primer Tenders | Government zinc primer Tenders

CTN :45627779

29 Jun, 2026 NA

Palakkad - Kerala

Tender For material procurement - material work, stone aggregate(single size): 40+b14:b93 mm nominal size, stone aggregate(single size):20 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), sundries, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, twisted steel/deformed bars, stone aggregate(single size): 10 mm nominal size, stone for masonry work, solid blocks of size 30x20x20cm, wall form panel 1250x450xmm, corner angle 45x45x5 mm 2.50 long, column clamp 450x1070 mm, prop 2 m (2-3.5m), structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, adjustable span eso+si (2.35-3.40), solid blocks of size 30x20x15cm, mild steel tubes electric resistant or induction butt welded, mild steel round bar 12 mm dia and below, flats up to 10 mm in thickness, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, factory made glass reinforced plastic door frame 90x45 mm i/c carriage, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), pvc pipe 110 mm outer dia 6kgf/cm2, pvc pipe 15 mm outer dia 10kgf/cm2, pvc pipe 32 mm outer dia. 10kgf/cm2, pvc pipe 40 mm outer dia. 10kgf/cm2, pvc pipe 63 mm outer dia . 6kgf/cm2, pvc vent cowl 63 mm dia, pvc vent cowl 110 mm dia, brass bib-cock-15 mm dia, pvc elbow 63 mm dia, pvc 45 degree elbow 63 mm dia, pvc door elbow 63 mm dia, pvc bend 63 mm dia, pvc tee 63x63x63 mm dia, pvc socket/coupling 63 mm dia, pvc elbow 110 mm dia, pvc 45 degree elbow 110 mm dia, pvc door elbow 110 mm dia, pvc bend 110 mm dia, pvc tee 110x110x110mm dia, pvc socket/coupling 110 mm dia, pvc pipe 25 mm outer dia . 12 kgf/cm2, vitreous china orrisa type w.c. pan size 580 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, black plastic seat (soild) with lid c.p.brass hinges and rubber buffers, vitreous china pedestal type wate closet, vitreous china flat back wash basin 550x400 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, polyethylene water storage tank with cover and suitable locking arrangemnet, fine sand (zone iv), vitrified floor tile 60x60 cm, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., multi surface paint, special primer (c.w), black japan, synthetic enamel paint in black or chocolate shade, mild steel plates, g.i. pipes 40 mm dia, mild steel round bar above 12 mm dia, welding by electric plant, stainless steel (grade - 304) hollow section round/square tubes, stainless steel bolts /square bar and plates

CTN :45628844

27 Jun, 2026 30.56 Lacs

Mussoorie - Uttarakhand

Tender For annual repair and maintenance of non-residential building of lbsnaa, mussoorie. during 2026-27. (sh:- supplying materials required for day to day maintenance). (2nd call).subwork/packages:supplying materials- ordinary portland cement/ppc white cement reinforcement steel tmt bars , structural steel, , water proofing compounds, admixtures, plasticizer, super plasticizer, curing compounds, , proofing integral water compound with cement (for plaster & mortar), , water proofing for bathroom/file/balcony & other et areas, , crystalline water proofing compound, , polycarbonate sheet, , profile steel sheet, , partice board, , laminates, , flush door shutters, , fire rated doors, , hardware/fixtures/fittings for induding fire rated doors glazed fire nated doors, , fire rated class, , false ceiling system, , plywood/veneer, , melamine polish, , floor spring & door closure, , aluminium section, , aluminium door/window partitions fabricators, , anodised aluminium hardware heavy duty), , clear float/frosted/toughened glass/refractive class, , stainless steel falling accessories etc., , door window & fittings, , silicon based repellantweathersealant, , poly-sulphide sealant, , mosaic tiles/chequered tiles, , ceramic tiles, , vitrified (antiskid/matt/glazed qvt vitrified tile permitted), , tiles (only, , grouts, tile adhesive, , paver block & kerbstone, , desh/anchoring fasteners, , cement based wall putty, , oil bound washable distemper dry distemper, , 1st quality acrylic distemper/dry distemper, , acrylic emulsion paints, , plastic emulsion paints, , premium acrylic paints (interior), , emulsion, , textured exterior paint, , acrylic smooth exterior paint, , premium smooth acrylic exterior paint with silicon additive., , cement primer, , steel primer (red oxide zinc chromate primer), , wood primer, , epoxy paint, , fire paint, , g.l/ms. pipe, , g.l. fittings, , hdpe pipes, , di pipes, , di pipes, , cpvc pipe and fittings, , centrifugally cast spur) rom pipes & fittings, , c.i. manhole covers, frames, & of gratings, , sfrc manhole covers & gratings, , cp brass fittings (superior range), , cp brass fittings (normal range), , minor class, , sanitary ware, fittings & accessories (superior range), , sanitary ware, fittings accessories (normal range), , &, , stainless steel sink, , rcc pipes (np-2), , upvc doors & windows & theis (profile makers authorized fabricators only), , extruded polystyrene insulation board, , heat resistant tiles, , gypsum plaster, , floor hardener, , modular expansion joint, , glass wool, , upvc doors and window hardware, , ready mixed plaster, , aluminium composite panel, , designer coloured concrete floor tiles for outdoor use., , fibre glass shelf, , float class, , frp shutters, , hydraulic door closer/spring, , metal false selling, , mineral fibre celling, , acoustic panels and celling, , clay tiles on roof, , orissa pan, , ppr pipes, , plastic connection pipe, , pvc rain water pipe & fitting, , 18:13502 type a&b, , pvc shutter, , pvc tank, , 88 ralling, , towel ring towel rod/towe fack, , rmc (ready mix concrete), , mangalore tiles, , rcc door frame, , galvalume sheet, , ptmt, , anti carbonation paint, , fly ash bricks, , aac block, , aac block adhesive, , puf sandwich panel, , polymer based contentious water proof coatings/polyure beatment, , expension joint filler joint wires, , expension fillerboard, , roller/froman/vertical blinds, , wpc, , peb buildings, , frp manhole covers & ratings, , frp sheets & cutters, , solar module structures mounting, , upvc door window reinforcement channels, , moduler containerized shelters, , light gauge steel framing systems, , grid suspension ceiling system (t-grids), , polyurethane binder, , , , flooring, , , , wooden, , fibreglass reinforced asphalt roof shingle, , cement fibre boards

CTN :45628605

10 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply and installation of vehicle shed - column 150mm nominal bore , truss for span 6987mm , purlins , ppgi sheet 14ft long , pre-painted galvanized steel sheet , sd screw with epdm washer , 12mm dia tmt bar , 8mm dia tmt bar , ms binding wire 0.9mm dia annealed , 12mm th shuttering plywood size 8ftx4ft , nails 1 inch and 2inch mixed , form oil , cement base paint applying as per manufacturing instruction , cement primer , supply of 4x450mm mild steel welding rod each pkt 90 rods , thinner , red oxide , synthetic enamel paint , painting brush 3 inch , lightening conductor , cement of 43 grade opc in sealed bags each weighting 50 kgs , river sand coarse , stone agg graded 10 to 20mm , stone agg graded 40mm , hardcore 40mm to 63mm broken boulder stone , pcc solid bricks of size 230 mm x115mm x75mm of minimum strength of m 15 grade a quality , material for stone sett flooring with granite stone with stone setts of size 200 to 250 mm long 150 to 200 mm wide and 150 mm deep and sides dressed

CTN :45223461

22 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For bid to ras supply of provn of prefabricated store shelter , pvc insulated cable copper conductor 1 point 5 sqmm , pvc insulated cable copper conductor 2 point 5 sqmm , pvc insulated cable aluminium conductor 6 sqmm , flexible wire 23 oblique 76 copper conductor , pvc casing capping 25 mm , ms screws 6mm x 19 mm , ms screws 4mm x 19 mm , ms screws 6mm x 40 mm , switch piano type 6 amp , switch and socket combination 5 pin 5 amp , switch and socket combination 15 amp 5 pin , main switch 32 amps , mcb 6 amp sp , mcb 10 amp sp , mcb 32 amp dp , angle holder , led bulb 14 w , led tube light fittings of 20w , ceiling fan complete with accessories , bulk head fitting of 18 watt , fr electrical insulation tape , ceiling rose, 6 amp pilot 02 plate , change over switch , mcb box 6 way spn , rectangular wooden switch board , pvc round block , exhaust fan 450 mm sweep , pvc switch board 6 points , earthing set , lightening arrestor system , integral water proofing compound , synthetic enamel paint white colour , synthetic enamel paint og colour , synthetic enamel paint brown colour , red oxide zinc chromate primer , wooden primer white colour , taurpentine oil , oil bound distemper in off white colour , weather coat exterior emulsion , panting brush 50 mm , mild steel chromium plated , fan hook , ms binding wire , texture finished gypsum board , office chair with cushion , office table steel , steel racks , pvc chair with arms , mild steel dunnage , erection tools one set , portable concrete mixture machine diesel engine

corporations/Associations/Others

CTN :45623970

13 Jul, 2026 1.23 Crore

Multi City - Karnataka

Tender For supply of enamel paints and allied materials - metal paste, rubbing compound, epoxy primer thinner, thinner 102 (reducer), pu polyester putty, nc putty, red oxide primer , tyre rim hood paint , chassis black paint, epoxy primer grey / epoxy hardener for paints, nc thinner , enamel paint thinner, enamel silver paint, enamel light paint / other standard shades, enamel paint - white / half white / deep orange / golden yellow / dark green / pale cream / raw silk / ivory grey / opaline green, enamel paint - black / p o red / passion red / oxford blue /navy blue / sky blue / dark grey / light grey / smoke grey / nilgiri blue

State Government

CTN :45625466

02 Jul, 2026 16.05 Lacs

Gautam Budnagar - Uttar Pradesh

Tender For providing and fixing of open gym equipment and g.i chain link fencing open gym in village chanchali yea wc-6 - sit up station: providing, designing and fixing of double sit-up station of size 1500 x 1150 x 650mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe of 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80 - 120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. seat and base plate cover to be made up from virgin lldpe manufactured by rotational molding with minimum thickness of plastic as 8mm, colorful and uv resistant and environmental friendly. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately). (ar/yeida/uppwd/sor-2020), leg press: providing, designing and fixing of leg press of size 2000 x 550 x 1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80 - 120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. handle bars to be provided with high quality grip rubber on top end. pedals shall be made up of nylon alloy with rounded edges to prevent any impact of injury. seat and base plate cover to be made up from virgin lldpe manufactured by rotational molding with minimum thickness of plastic as 8mm, colorful and uv resistant and environmental friendly. bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer in charge. equipment to be fitted with inbuilt limiters to prevent unwanted movements. all open ends of pipe to be closed by gi/ lldpe caps for user safety. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc (the cement concrete and excavation work shall be paid separately). (ar/yeida/uppwd/sor-2020), seated chest press: providing, designing and fixing of seated chest press in a pair of size 1800 x 700 x 2000 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80 - 120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. handle bars are to be provided with high quality grip rubber. pedals shall be made up of nylon alloy with rounded edges to prevent any impact or injury. seats and base plate cover to be made up from virgin lldpe manufactured by rotational mounding with minimum thickness of plastic as 8mm, colorful and uv resistant and environmental friendly. bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer in charge. equipme

CTN :45615494

06 Jul, 2026 85.9 Thousand

Azamgarh - Uttar Pradesh

Tender For supply of paints - white paint berger , golden yellow paint berger , smoke grey paint berger , bus green paint berger , azure blue paint berger , tractor orange paint berger , sky blue paint berger , black enamel paint berger , aluminium paint with paste , general purpose thinner , red oxide zinc chromate primer berger

CTN :45631441

02 Jul, 2026 NA

Patiala - Punjab

Tender For supply of material for providing of different parking of ucoe staff and students at pup - m.s. channel ismc, m.s. sangal , cutter blade , grinder wheel, red oxide primer , s/e black paint, t.t. oil pack, painting brush, cement (bag) , coarse sand.

State Government

CTN :45606470

29 Jun, 2026 25.28 Lacs

Barnala - Punjab

Tender For annual rate of contract supply of hardware material for annual repair and maintenance for f/y 2026-27 supply of oxidised mild steel hasp and staples (safety type) 115 mm of approved quality., supply of oxidised mild steel screws (pkt. of 200 nos.) (netle f&d make or equivalent), a. 20 mm, b. 25 mm, c. 30 mm, d. 35 mm, e. 50 mm, f. 60 mm, g. 75 mm, supply of ss screws (pkt. of 200 nos.) (netle f&d make or equivalent), a. 20 mm, b. 25 mm, c. 32 mm, supply of black screws (pkt. of 200 nos.) (netle f&d make or equivalent), a. 20 mm, b. 25 mm, supply of chipboard screws (pkt. of 200 nos.) (patta, omni make or equivalent), a. 3.5 x 20 mm , b. 3.5 x 25 mm, c. 3.5 x 32 mm, d. 3.5 x 38 mm, e. 3.5 x 50 mm, f. 3.5 x 60 mm, g. 3.5 x 75 mm, supply of oxidised mild steel sliding door bolt of approved quality. , a. 250 x16 mm, b. 300 x16 mm , supply of oxidised mild steel handles of approved quality., a. 100 mm, b. 125 mm, supply of anodised aluminium tower bolt (barrel type) of approved quality., a. 100x10 mm, b. 150x10 mm, c. 200x10 mm, d. 250x10 mm, e. 300x10 mm, supply of aluminum sliding door bolt of approved quality., a. 250 x16 mm, b. 300 x16 mm, supply of oxidised mild steel tower bolt (barrel type), a. 100x10 mm, b. 150x10 mm, c. 200x10 mm, supply of anodised aluminum handles of approved quality., a. 75 mm, b. 100 mm, c. 125 mm , d. 150 mm, supply of plywood water proof (make green, duro, century, archidply, modiply & evergreen), a. 06 mm, b. 09 mm, c. 12 mm , d. 18 mm/19 mm, supply of marandi/red champ cut to size including grooving & finishing all respect (well seasoned), supply of second class teak wood cut to size including grooving & finishing all respect (well seasoned), supply of teak plywood (make internet maxima & sanik, green, national or equivalent), a. 04 mm, b. 06 mm, c. 12 mm , supply of marandi wood beading finishing all respect (well seasoned), a. 1/2" x 3/4" , b. 1.1/2" x 1/2", supply of sunmica sheet (8' x 4') as per sample or approved quality. (make green, duro, century, archidply, modiply & evergreen), a. 0.8 mm, b. 01 mm, supply of masking tape , supplying of panelled shutter for doors including isi marked black enamelled m.s. butt hinges with necessary screw, including panelling of 12 mm thick water proof ply. kiln seasoned and chemically treated hollock wood. 30 mm thick shutter. , supply of block board construction flush door with teak wood ply on both faces 30 mm thick of approved quality., supply of wire gauge shutters using galvanized m.s. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws 35mm thick shutters kilin seasoned and chemically treated hollock wood , supply of pvc door shutter as per is , specification of sintax, rajshiri or make or equivalent, supply of wood primer (nerolac, asian, burger, dulux or equivalent) of approved quality., supply of water based exterior primer (nerolac, asian, burger, dulux or equivalent ), supply of red oxide primer (nerolac, asian, burger, dulux or equivalent), supply of synthetic enamel paint (nerolac, asian, burger, dulux or equivalent ) of approved quality., supply of terracotta paint (nerolac, asian, burger, dulux or equivalent) of approved quality., supply of acrylic smooth exterior paint (nerolac, asian, burger, dulux or equivalent) of approved quality., supply of plastic emulsion paint (nerolac, dulux, asian, burger, dulux or equivalent make), supply of touch wood polish (nerolac, asian, burger, dulux or equivalent ) of approved quality., supply of turpentine oil of approved quality., supply of spirit of approved quality., supply of colure tube (100mm), supply of paint roller (size 10”), supply of thinner, supply of silicone, supply of siller, supply of putting patti of approved quality., supply of malmal/mulmul cloth of approved quality., supply of lime (as per approved sample), supply of indigo (neel) (as per app

State Government

CTN :45585176

29 Jun, 2026 8.18 Lacs

Gautam Budnagar - Uttar Pradesh

Tender For providing and fixing of open gym equipment in village tilpata karanwas, greater noida. - sit up station: providing, designing and fixing of double sit-up station of size 1500x1150x650mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe of 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. seat and base plate cover to be made up from virgin lldpe manufactured by rotational moulding with minimum, thickness of plastic of 8mm, colorful and uv resistant and environmental friendly., the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately)., air walker: providing, designing and fixing of air-walker of size 1100 x 550 x 1480mm fabricated with main post of 114mm dia and 2.5mm thick and other pipes of 10mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using akzo nobel or equivalent in desired shade and colour. all welding joints of pipe shall be robotic weded with joints paint to be applied al all the welding points prior of finising. all open ends of pipe to be closed with gl/lldpe caps. base plate cover shall be made virgin lldpe plastic by roatational molding with minimum 8mm thickness. uv resistant and colour as approved by engineer in charge. ligh quality grip rubber should be used on handles., foothold shall be made of nylon prevent alloy with rounded edges to impact and injury. maintenance free bearings should be used in the equipments manufactured by reputed company duiy oil sealed and self lubricated to be approved by engineer-in charge. the equipment shall be fitted with in-built limiters. the equipent shall be fixed on ground with concrete of minimum strength m-25 and js haped welded bolts and when concrete is sec. fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of engineer-in charge regarding material, shape of equipment. colour (of metal. seat and pedal). and fixing of equipemnt etc (the cement concrete and excavation work shall be paidseparately)., seated chest press: providing, designing and fixing of seated chest press in a pair of size 1800 x 700 x 2000mm abricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off |removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. handle bars are to be provided with high quality grip rubber. pedals shall be made up of nylon alloy with rounded edges to prevent any impact of injury. seats and base plate cover to be made up from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic of 8mm, colourful and uv resistant and environmental friendly., bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer in-charge. equipment to be fitted with inbuilt limiters to prevent unwanted movements. all open ends of pipe to be closed by gi/illdpe caps for user safety. the equipment to be fixed on ground with concrete of minimum

Zinc Primer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

State Government

State Government