Latest zink plated Tenders | Government zink plated Tenders

Corporations / Associations / Others

CTN :45366924

19 Jun, 2026 NA

Bangalore - Karnataka

Tender For supply of wheel 24 , hhcs m20 zinc plated , washer flat hadr , thread locker , indicator loose wheel nut

corporations/Associations/Others

CTN :45225596

04 Jun, 2026 20.68 Lacs

Sonbhadra - Uttar Pradesh

Tender For corrigendum : supply of frame plate liner insert stud plus nuts,part no.6, material- enb zinc plated , set screw mechanical seal, part no.21, material-aisi 316 , adjusting screws and nut and washer, part no.15, material-ms zink plated , clamp bolt, part no.3 material-ms zink plated , clamp washer, part no.2 material ms zink plated , cover plate bolt and nuts, part no.27, material- en 8 , discharge joint ring, part no-10, material- synthetic rubber , frame plate bolt plus nuts, part no.20, material- is 1363 , frame plate liner insert, part no.8, material-hichrome , impeller, part no.9 material- hichrome , intake joint ring, part no.14material-synthetic rubber , keeper plate, part no.29, material-ms zink plated , mechanical seal, material- mod ps 4.625 inch , o ring for impeller, part no.24, material- synthetic rubber , o ring for sleeve, part no.4, material- synthetic rubber , oil breather, part no.30, material- ms , seal adopter, part no.23 material- hichrome , seal ring, part no.7 material-synthetic rubber , shaft sleeve, part no.5, material-astma743 cf8m , tapper roller bearing-6535-6580, part no.1 material-steel , throat bush, part no.11, material-hichrome , volute liner seal, part no.25, material-synthetic rubber , volute liner, part no.26, material- hichrome

CTN :45335050

01 Jun, 2026 NA

Kharagpur - West Bengal

Tender For supply of helical spring washers type b m36, material spring steel, zinc plated ( passivated) conforming to is:3063. [ warranty period: 30 months after the date of delivery ] ]

CTN :45354709

08 Jun, 2026 NA

Kota - Rajasthan

Tender For supply of s cotton theread 210 dtex x2 white 500m , cloth dosuti cotton yellow 91cm wide , oil linseed raw , adhesive padding glue mowicol l , paper wrapping waxed 841 mm x 100 mtr , polythene film 25mm thick x 1m width , electrode welding high alloy steel 3.15mm , wire steel mild annealed 0.56mm , sewing thread speen polyster og , paper wrapping 1189mmx100mtrs , s cotton thread 210 dtex x2 white 500m , s cotton thread 100 dtex x6 khaki 1000m , s cotton thread 100 dtex x6 white 50m , sewing cotton thread 590dtex x3 white 1000 , nails steel wire round 40mm x 2mm , nails steel wire round 25mm x 2mm , nails steel wire round 100mm x 5.00mm , nails steel wire round 15mm x 1.6mm , electrodes welding steel armour 4mm , wire steel mild annealed 5mm , electrodes welding steel armour 3.15mm , wire steel mild bright 1.25mm , electrodes welding steel mild general pu , adhessive well seal , bleaching powder stabilished , cloth bunting india green 145 cm , cloth bunting scarlet , cloth bunting yellow , plywood for general purposes mraa9 ply , polythene film .18mm thick x 1m width , polythene film .04mmm thick x 1m width , washer plain steel zinc plated 6.6mm , washer plain steel zinc plated 11mm , plywood for general purposes mr-ab 3 pl , paper wrapping kraft 1189mm x 100mm , nails steel wire round 30mmx2mm , nails steel wire round 70mm x 2.8mm , wire steel mild annealed 2.00mm , chloroxylenol solution , s cotton thread 100 dtex x6 black 500mm , nails steel wire round 20mm x 1.6mm , electrodes welding steel high tensils 3 , abrasive paper glass is grit 150 size o , washer spring single coil type a stee , water for storage bty , tubing copper round seamlesss od 8mm x wt , pins cotter split steel 2.5mmx 50mm , pins cotter split steel 3.2mm x 25mm , washer plain steel zinc plated 9mm , washers spring sing coil type b steel , flux welding alluminium 110g container , flux welding bronze 450g container , graphite dry flake , inhictor c vapour barrier water soluble , jointing as f comp gr .8m 100x100cm , cork sheet thick 3.2mm , can round with lever lid 0.5kg , paper wrapping water proof plain 841mm //bid details 2 / 50

State Government

CTN :45341930

05 Jun, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate including gst and cess for implementation of different scheme under mgnrega at khoyrasole dev. block and 10 nos of gp under khoyrasole dev. block for the year 2026 27 - mgnrega materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, brick bats, portland cement, white cement, coal (steam), brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever, glue, unslaked lime, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer on wood work(hard and softwood) having voc content less litrethan 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 litre gms/litre, moorum, black japan, synthetic enamel paint in black or chocolate shade, superior copal varnish, green or blue medium shade pigment, rolling shutter made of 80x1.25 mm machine rolled laths, galvanised steel plain sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, stone dust, g.i limpet washer, bitumen washer, g.i. plain washer for seam bolts, wire mesh (rabbit), diesel oil, mirror of superior make glass 60x45 cm, vitreous china pedestal for wash basin, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia, g.i pipes 50 mm dia, g.i. pipes 65 mm dia, g.i. pipes 80 mm dia, r.c.c. pipes np2 class 250 mm dia, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 600 mm dia, r.c.c. pipes np2 class 900 mm dia metre, r.c.c. pipes np2 class 1000 mm dia, white plastic seat (solid) with lid c.p. brass hinges and rubber buffers, shower rose c.p brass for 15 to 20 mm intel 100 mm dia, vitreous china squatting plate urinal, h.p. or l.p. ball valve with polythene floats: 15 mm dia, h.p. or l.p. ball valve with polythene floats: 20 mm dia, h.p. or l.p. ball valve with polythene floats: 25 mm dia, brass full way valve with c.i. wheel (screwed end) 25 mm dia, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china foot rests 250x125x25 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), anodised aluminium hanging type door stopper, galvanised steel corrugated sheets, vitreous china flat back wash basin 550x400 mm, stainless steel bolts /square bar and plates, mild steel tubes hot finished seamless type, red oxide zinc chromate primer, vitreous china flat back wash basin 450x300 mm, hydraulic door closer tubular type aluminium section body each, oxidised m.s. casement stay (straight peg type) 300 mm not less than 0.33 kg, coloured orissa pattern w.c. pan 580x440 mm, coloured pedestal type w.c. pan 580x440 mm (european type), circular shape 450 mm dia precast r.c.c. manhole cover with frame l.d. -25, upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal tee

State Government

CTN :45325008

02 Jun, 2026 NA

Nadia - West Bengal

Tender For material supply works of mgnrega under santipur development block - coarse sand(grading zone ii as per is 383-1970) stacked at site , medium sand(grading zone ii as per is 383-1970) stacked at site, , fine sand(grading zone ii as per is 383-1970) stacked at site, , silver sand- stacked at site, , cement(ppc/psc/opc) 33 grade, , cement(ppc/psc/opc) 43 grade, , cement(ppc/psc/opc) 53 grade, , steel material- tor steel rods/hysd bars/tmt, , bars(sail/tata/rinl) (fe415/fe500/fe500d, conforms to is 1786), , steel material- tor steel rods/hysd bars/tmt, , bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro, , steel) (fe415/fe500/fe500d, conforms to is 1786), , stone graded aggregates 10mm nominal size, , stone graded aggregates 20mm nominal size, , stone graded aggregates 40mm nominal size, , (a) first class bricks(kiln burnt) sorted and stacked at site, , (a) second class bricks (kiln burnt) sorted and stacked at site, , (c)first class picked jhama bricks sorted and stacked at site, , (e) jhama metal (kiln burnt) sorted and stacked at site, , (f) brick bats sorted and stacked at site, , (g) brick aggregates (40mm down) sorted and stacked at site, , hire charges of concrete mixer 0.25 to 0.40 cum with hopper, , vibrator(needle type 40mm), , plate vibrator, , hire charges of 5 kva genarator, , hire charges of 3 kva genarator, , hire charges of monkey set, , hire charges of diesel road roller- 8-10 tonne, , empty gunny bag, , nail, , salt bullah (7.5-10cm dia), , eucalyptus bullah (7.5-10cmdia), , thermocol 12.5mm thick., , polythene sheet(150gm per sqm), , gi wire, , coconut rope, , lime dust, , farm yard manure/cowdung(@max 20% moisture content), , vermi compost, , neem khol or other oil seed cake, , carbofuran-3g, , g-9/banana sapling tissue culture, , nylon net, , poly rope, , bamboo, , 2:1:1 npk based organic manure, , 5:1:1 npk based organic manure, , jharii/rose can, , bio fungicides, , imida-chlorpide 17.8% sl, , chloropyriphos 50% ec, , zinc phosphide, , carbendazim 50 wp fungicides i.e bavistin, , spraying machine (hire) per day, , curing compound, , good earth, , polithin tube(25 cm*10cm), , insecticide, , hire charge of 25 mm thk. shuttering timber wood, , n.r.k. (10:26:26), , n.r.k. (19:19:19), , n.r.k. (20:20:20), , unslaked lime, , glue, , wire mesh, , hire charge of electric welding machine, , galvanised steel corrugated sheet, , galvanised steel boits & nuts 6mm dia & 250 mm long round, , head with slots, , galvanised steel j or l hook 8 mm dia, , g.i. limpet washer, , bitumen washer, , galvanised steel plain sheet, , paddy straw, , mild steel tubes hot finished seamless type, , poly rope, , mango seedling, , nursary water cane, , insecticide, , akash moni seed, , neem seed, , segun seed, , mehoguni seed, , gamar seed, , garden seed, , krishnachura seed, , radhachura seed, , babla seed, , areca saplings, , coconut saplings, , mango bid, , coconut rope, , hire charge of bamboo for shuttering, , water proofing compound, , m.s. integrated steel for steel window and ventilator, , m.s.or w.i. ornamental grill for door and window, , chromium plated brass handles 100 mm with plate 175x32 mm, , bright finished or black enamelled mild steel butt hinges 75x47x1.70 mm., , bright finished or black enamelled mild steel butt hinges 50x37x1.50 mm., , bright finished or black enamelled mild steel scrwes 50 mm., , bright finished or black enamelled mild steel scrwes 40 mm., , bright finished or black enamelled mild steel scrwes 30 mm., , bright finished or black enamelled mild steel scrwes 25 mm., , bright finished or black enamelled mild steel scrwes 20 mm., , bright finished or black enamelled mild steel bolts and nuts 50x6 mm., , oxidised mild steel sliding door bolt 300x16 mm., , oxidised mild steel sliding door bolt 250x16 mm., , oxidised mild steel door latch 300x20x6 mm., , oxidised mild steel door latch 250x20x6 mm., , oxidised mild steel tower bolt (barrel type) 250 x10 mm., , oxidised mild steel tower bolt (barrel type) 200 x

CTN :45337714

15 Jun, 2026 NA

Howrah - West Bengal

Tender For supply of compressor delivery hose coupling for wag-9/wap-7/wap4 locos. as per els drg. trs/hwh/el-607/13,alt-1 (ae100r2at hose id: 1.1/4 inch, od and tolerance as per sae j517-2017. fitting will be made from is-2062-e250a steel duly zinc plated (drg copy enclosed). [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45339140

05 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of washer, round, flat for 3/8" bolt size, id:11mm, od:20mm, thickness:2mm, material en2 (cr) zinc plated or phosporated. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max8 lacs ] ]

CTN :45339147

02 Jun, 2026 NA

Multi City - Multi State

Tender For supply of lock bolt ( 22.2 mm ) dia with coller and zink plated grip range min 38.10 mm to max 44.45 mm , grip no.24. confirming to rdso spec. no. is/rdso-wd/0001:2022 [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45339293

16 Jun, 2026 NA

Tirupati - Andhra Pradesh

Tender For supply of heavy duty earthing clamp 600 amp crocodile type for welding work as per is 2641-1989. earth clamp made of zinc coated steel and copper plated jaws provide very good contact with the work piece. jaws can be opened up to 60mm with length 200 mm which is suitable for cable dia of 50 mm2 and most suitable for heavy duty applications. make: ador welding/esab/messer/prima/hmp/weldstar/jainco or similar. [ warranty period: 30 months after the date of delivery ] ]

Zink Plated Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations / Associations / Others

corporations/Associations/Others

State Government

State Government

Central Government/Public Sector

Central Government / Public Sector