Aluminium Items Tenders

State Government

CTN :41204633

31 Jul, 2025 17.86 Lacs

Delhi - Delhi

Tender For maintenance of completed scheme under na-ii/south zonesh-providing and installation of digital safety system and safety equipments in community halls of kishangarh and harkesh nagar (specialized work) - supplying and installation of high quality image with 4 mp ip bullet camera, audio recording 1/2.8"cmos sensor, 4 mp (1920*1080)@30/25fps; 720p (1280*720)@30/25fps, ultra 265, h.265, h.264, smart ip, up to 30m (98ft) ip distance, day/night functionality, 2d/3d dnr (digital noise reduction), ip67 protection, support poe power supply, 3- axis, , lens - 2.8 mm- 6 mm@f2.0, adjustment angle, pan: 0 ~ 360 , shutter - auto/manual, 1 ~ 1/100000s, minimum illumination - colour: 0.01lux (f2.0, agc on) 0lux with ir on, , digital noise reduction - 2d/3d dnr, day/night - ir-cut filter with auto switch (icr), s/n - >52db, ir range - up to 30m (98ft) ir range, wave length - 850metre, ir on/off control - auto/manual, defog -digital defog, wdr - dwdr, 10/100m base-tx ethernet, ce: en 60950-1 ul: ul60950-1 fcc: fcc part 15, complete as req. make:- hikvision / advidia / dahua/bosch or equivalent as approved by the engineer-in-charge., supplying of nvr support ultra 265/h.265/h.264 video formats, 16-channel input, third-party ip cameras supported with onvif conformance: profile s, profile g, profile t, support 1-ch hdmi, 1-ch vga, hdmi at up to 4k(3840x2160) resolution, hdmi and vga simultaneous output, up to 4k resolution recording, 4 sata hdd up to 10tb, support cloud upgrade, ip video input - 4-ch, upto 160 mbps incoming and outgoing bandwidth, remote users - 128, protocols - p2p, upnp, ntp, dhcp, pppoe, video/audio output - hdmi/vga output - hdmi: 3840x2160/30hz, audio output - 1-ch, 3.5mm ,decoding format - ultra 265/h.265/h.264, sata - 1 sata interface, capacity - up to 6tb for each disk, network interface - 1 rj45 10m/100m self-adaptive ethernet interface complete make:- hikvision / advidia / dahua/ bosch or equivalent as approved by the engineer-in-charge, supplying of 6 tb hdd for nvr complete as req. make- seagate, wd, toshiba or equivalent as approved by the engineer-in-charge., supplying of 16 port gigabit poe switch easy smart managed 16 poe+ (802.3at/af)10/100/1000 mbps rj45 ports providing up to 30w per port total @ 250 watt, 2 non-poe ports total 18 port 2 combo sfp slots for high speed connection i/c testing etc. complete as req. make: cisco/ tp link/ juniper/ netgear/ or equivalent as approved by the engineer-in-charge., supplying and drawing of utp 4 pair cat 6 lan cable in the existing surface/recessed steel/ pvc conduit as required and approved by the engineer-in-charge. make: d-link/ cp-plus/ finolex / havells or equivalent as approved by the engineer-in-charge., supplying of fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 25 mm as approved by the engineer-in-charge., supply, installation, commissioning of 43 (108 cm) 4k ultra hd smart led tv with usb port for cctv surveillance system i/c testing etc. as required. make: samsung / lg/ sony or equivalent as approved by the engineer-in-charge., supply, installation, commissioning of 6u outdoor weatherproof rack confirms to ip55 outdoor standards. adjustable 19 equipment mounting verticals provide better mounting flexibility and maximize the usable mounting space depth adjustable mounting slots pole/ wall mounting provision on rear side top panel with ventilation cable entry from bottom. pdu of 6 socket and fan, lockable toughened glass door, powder coated sheet metal cabinet factory with accessories i/c wall mounting, fixing, testing etc. complete as req. make: server rack/ netrack/ dynamic/ rittal or equivalent as approved by the engineer-in-charge, supply, installation, commissioning of online ups 1kva 24 volts inbuilt ovcd for 1-2 hrs. backup for nvr and cameras, monitor i/c wall mounting, fixing, testing etc. as required make: microte

Corporations/Associations/Others

CTN :41247322

06 Aug, 2025 4.69 Lacs

Multi City - Karnataka

Tender For purchasing of computers printers and others materials to office of hagaribommanahalli tmc - computer printer with minimum 1 year on site warranty, including cartridge and power cord/adaptor, print technology-laser, type of printing-monochrome (black), paper size-a4 and legal, minimum print speed per minute as per iso/iec 24734 in a4 size-monochrome (black) (in ppm)-36 to 40, auto duplexing printing (2-sided feature)-yes, connectivity-usb port ,ethernet port ,wi-fi, computer printer with minimum 1 year on site warranty, including cartridge and power cord/adaptor, print technology-inkjet, type of printing-colour, paper size-a4 and legal, minimum print speed per minute as per iso/iec 24734 in a4 size-monochrome (black) (in ppm)-41 to 45, minimum print speed per minute as per iso/iec 24734 in a4 size-colour (in ppm)-21 to 25, auto duplexing printing (2-sided feature), connectivity-usb port ,ethernet port ,wi-fi, desktop computer with table mount monitor system with compatible chipset as per processor make with minimum 6 usb port, computer type-entry level, processor number intel core i3 12100, factory pre loaded operating system by desktop oem window 11 professional, ram size (memory card or module) (in gb) type of storage installed with the system nvme ssd, ssd storage capacity (in gb) 512, all in one personal computers consist of a mouse, keyboard, display with web camera, inbuilt/integrated microphone array and speakers, an internal cpu with connection cables and power adapter with 1 year standard warranty, processor number, intel core i5-13500t, operating system (factory preloaded with certification) windows 11 professional, ram size (gb) 16, storage capacity (in gb) 1024, laptop with on site 1 year oem warranty, processor number, intel core i5 - 1245u, operating system (factory pre-loaded) window 11 professional, ram size (gb) 16, capacity of storage drive (in gb) 512)

Central Government / Public Sector

CTN :41203616

08 Aug, 2025 NA

Panipat - Haryana

Tender For supply of fittings pipe caps cs for cdw and pp units

Private Sector

CTN :41218472

19 Aug, 2025 NA

Bhiwandi - Maharashtra

Tender For capex / sitcof pouch packing machine of capacity 10000 pph & other accessories at mother dairy/bhiwandi/ mahrashtra / gk /25-26

corporations/Associations/Others

CTN :41192873

07 Aug, 2025 2.10 Lacs

Haveri - Karnataka

Tender For dma/hvr/2025-26/water supply materials annual maitainance/ts - for 25 mm dia gi collar , for 32 mm dia gi collar , for 50 mm dia gi collar , electro fusion coupler 63 mm, electro fusion coupler 75 mm, electro fusion coupler 90 mm, electro fusion tee 63 mm , electro fusion tee 75 mm , electro fusion tee 90 mm , electro fusion elbow 63 mm , electro fusion elbow 75 mm , electro fusion elbow 90 mm , electro fusion reducer 90x63 mm , electro fusion reducer 75x63 mm , stainer 80 mm, m.s. flange 3 inch, cpv fta 0.5, cpve elbow brass 0.5 , compression mta 63 mm , compression mta 75 mm, compression mta 90 mm , pvc insulated cable of flat 3 core (sheathed) 1x3x1.5 sqm, sqm pvc insulated cable of flat 3 core (sheathed) 1x3x2.5, pvc insulated cable of flat 3 core (sheathed) 1x3x4 sqm, providing submersible pump set of 150mm dia suitable for bore well and confirming to is 8034-2000 3phase, ss bowl and impeller with low volt motor as per specifications,6.50 hp - 135 lpm at 110 m equals to 12 stg outlet dia - 2.00 inch , gi union 20.88.4 32 mm nominal bore , gi union 20.88.6 50 mm nominal bore , for 20 mm dia gi collar , pvc tee 180 mm dia , pvc tee 200 mm dia , pvc bend 25 mm dia , pvc bend 32 mm dia , pvc bend 40 mm dia , pvc bend 63 mm dia , pvc bend 180 mm dia , pvc bend 200 mm dia , pvc service saddles 25 mm dia , pvc service saddles 32 mm dia , pvc service saddles 110 mm dia , pvc service saddles 140 mm dia , pvc service saddles 160 mm dia , pvc service saddles 180 mm dia , pvc service saddles 200 mm dia , pvc reducer 25 mm dia, pvc reducer 32 mm dia , pvc reducer 40 mm dia , pvc reducer 140 mm dia , pvc reducer 160 mm dia , pvc reducer 180 mm dia , pvc reducer 200 mm dia , chlorinated polyvinyl - chloride (cpvc) pipe 32 mm nominal dia. , brass bib-cock 15 mm dia , brass bib-cock 20 mm dia , coconut broom stick , coir brushes , enamel paint , pvc couplers 25mm dia , dry distemper , nuts and bolts , ms flanges of 100mm dia and 8mm thick. , ms flanges of 150mm dia and 12mm thick. , pvc couplers 32mm dia , ms flanges of 200mm dia and 16mm thick. , ms flanges of 250mm dia and 16mm thick. , ms flanges of 300mm dia and 16mm thick. , providing, single phase submersible pump sets of 100mm dia (4 inch) suitable for bore well confirming to is 8034-2000 specifications 2 hp 1.5kw-25 stage, electrical & automation aluminum alloy dol starter, power 4 horsepower 3phase l&t,siemens equvilent, electrical & automation aluminum alloy dol starter, power 4 horsepower single phase l&t,siemens equvilent, pvc couplers 40mm dia , pvc couplers 50mm dia , pvc couplers 90mm dia , pvc couplers 160mm dia , pvc couplers 180mm dia , pvc tee 32 mm dia, pvc tee 140 mm dia , for 20 mm dia gi elbow , for 25 mm dia gi elbow , for 32 mm dia gi elbow , for 50 mm dia gi elbow , for 20 mm dia gi bend , for 25 mm dia gi bend , for 32 mm dia gi bend , for 50 mm dia gi bend , for 20 mm dia gi tee , for 25 mm dia gi tee , for 32 mm dia gi tee , for 50 mm dia gi tee , for 20 mm dia gi socket , for 25 mm dia gi socket , for 32 mm dia gi socket , for 50 mm dia gi socket , for 15 mm dia gm gland cocks , for 20 mm dia gm gland cocks , providing and laying of warning tape / caution tape / detector tape for hdpe pipes of 200 mm wide, 300 micron thick, blue in colour confoming to relevant iss with latest amendments with appurtenances., complete, size 50 mm gate valve, size 50 mm non-return valve, chlorinated polyvinyl - chloride (cpvc) pipe 20 mm nominal dia. , chlorinated polyvinyl - chloride (cpvc) pipe 25 mm nominal dia. , medium duty gi pipe of 32mm dia , medium duty gi pipe of 50mm dia , pvc pipes of 6 kg/cm2 for 110mm(1.894) , pvc pipes of 6 kg/cm2 for 160mm(3.923) , pvc pipes of 6 kg/cm2 for 200mm(6.233) , rcc pipe np3 600 mm dia & 2.5 m long , rubber gasket sbr quality 450mm dia. , upvc pipe is 16098 sn 4 - 110mm dia , hdpe pipe grade pe80-pn6.0, 75mm , hdpe pipe grade pe80-pn6.0, 90mm , hdpe pipe grade pe80-pn6.0, 110mm , providing and fixing ms casing collar

State Government

CTN :41176514

22 Aug, 2025 60.00 Crore

Coimbatore - Tamil Nadu

Tender For implementation of esm by supply installation and commissioning of 137 eep capacitor bank harmonics filter transformer and oandm of 37 p stations across 10 wss in cbe region pkg1 on ssm under ppp mode implementation period 8 months ,oandm period 10yrs

State Government

CTN :41217191

18 Aug, 2025 NA

Kheda - Gujarat

Tender For supply of mechanical measuring instruments & spanners (tools & tackles) at wtps - digital outside micrometer with large digital display. size : 0 - 25mm, resolution: 0.0001 mm., digital outside micrometer with large digital display. size : 25 - 50mm, resolution: 0.0001 mm., digital vernier calipers size - 0-300 mm mitutoyo make, allen key set black finish of mm series having sizes 1.5mm ,2mm,2.5 mm ,3mm ,4mm ,5mm ,6mm , 8mm , & 10mm allen keys, taparia make: allen keys (mm.sizes) black finish ,is 3082-1988 sizes- 12 mm,14mm, 17mm, 19mm, 22mm, 24mm, adjustable spanners , 110 mm length ,least max. opening 13 mm, chrome plated, with soft grip, chain pipe wrench, taparia product no: cpw 06, length:1000 mm, suitable for pipe dia. 150 mm, hss drill bit set 3 mm to 12 mm, weighing scale digital, polyester webbing slings with reinforced eye loop at both ends as per en 1492-1 size 125mm x 5t x 3mtr x red, polyester webbing slings with reinforced eye loop at both ends as per en 1492-1 size 125mm x 5t x 5mtr x red, copper round bar of size 40mm x5oo mm long, polyester flat belt webbing sling with plain eye loops at both ends, conf. to bs: 3481/part-ii capacity: 5 ton, std length: 5 mtrs, bolt cutter length-450 mm, chain pulley block cap-1 ton x3 mtr lift, chain pulley block cap-2 ton light weight, chain pulley block cap 3 ton, lift: 4.5 m, mitutoyo make dial gauge with magnetic stand : 0-10mm, steel wire rope sling with soft eye splice at both ends conf. to is: 5245/part-ii capacity: 10 ton, rope dia: 32 mm, std. length: 2 mtrs, taparia make t handle hex key. product no. tak 5., taparia make t handle hex key. product no. tak 6., torque wrench standard generally confirming to is 6789:2008 mac master product no-tw-2000r (range-1000-2000 lb.ft/135-275 kgf.m/1350-2700 n.m), torque wrench standard generally confirming to is 6789:2008 taparia product no-tw1000 (range-400-1000 lb.ft/55-140 kgf.m/540-1380 n.m), allen key set black finish of inch eries having sizes 1/16" , 5/64" ,3/32" , 1/8",5/32",3/16",7/32",1/4",5/16",3/8" allen keys, grease gun, polyester webbing slings heving specification capacity- 1tons,length-3mtr and width-50mm (max), screw spanner-12", non sparkable fixed spanner set : size: 6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27,25x28,30x32., fix spanner size 12x13 mm ., ring spanner size 12x13 mm, fix spanner size 10x11 mm, jhalani/tapariaring spanner 10x11 mm, fix spanner size 14x15 mm jhalani make, fix spanner 16x17 mm, jhalani/tapariaring spanner 16x17 mm, fix spanner 18x19 mm, jhalani/tapariaring spanner 18x19 mm, fix spanner size 24x26 mm, ring spanner size 24x26 mm, fix spanner 30x32 mm, ring spanner 30x32 mm, steel wire rope sling with soft eye splice at both ends, conf. to is: 5245/part-ii capacity: 1 ton, rope dia: 10 mm, std. length: 3 mtrs, steel wire rope sling with soft eye splice at both ends conf. to is: 5245/part-ii capacity: 2 ton, rope dia: 16 mm, std. length: 3 mtrs, steel wire rope sling with soft eye splice at both ends conf. to is: 5245/part-ii capacity: 5 ton, rope dia: 22 mm, std. length: 5 mtrs, circlip plier external (bent nose),product no: 1444.7,capacity :19.6 mm, length:180 mm, taparia or jhalani or any equivalent make, internal circlip plier size 8" no1440 taparia make, two stage two gauge acetylene gas pressure regulator model : dura a-1.5 - esab make, two stage two gauge oxygen gas pressure regulator - model no : dura 0-10 - esab make, hanna make tds tester (0-2000 ppm), model: hi98301, hanna make ph meter, model: hi98107

Central Government/Public Sector

CTN :41190431

13 Aug, 2025 21.67 Lacs

Mumbai - Maharashtra

Tender For refurbishment of existing aluminum sliding windows with miscellaneous repairs in 21 nos. of flatlets in bhaskara building, tifr housing complex.

State Government

CTN :41256787

01 Aug, 2025 NA

Kolkata - West Bengal

Tender For quotation for tris base 99.0% cell culture tested , parafilm m 4"x125' , dessicator vacuum, pp/pc 300mm , round bottom flask with b34 joint 3000ml , reagent bottle with pp screw cap 100ml , reagent bottle with pp screw cap 250ml , reagent bottle with pp screw cap 500ml , reagent bottle with pp screw cap 1000ml , reagent bottle with pp screw cap 2000ml , conical flask narrow mouth, with graduation 250ml , conical flask narrow mouth, with graduation 500ml , conical flask narrow mouth, with graduation 1000ml , culture tube flat bottom, with pp cap 50ml , petri dish 4"x17mm

State Government

CTN :41192212

18 Aug, 2025 17.01 Lacs

Anuppur - Madhya Pradesh

Tender For procurement of various spares of air pre heater (model 27vitm2000) of 210 mw, atps, mppgcl chachai - hot end air sealing housing assembly alongwith aluminum seal assy and fasteners , hot end tracking spool assembly alongwith adjuster rods , aluminum straight edge for radial seal setting , cold end spool assembly , pin and rack assembly , "water washing pipe assembly with ss nozzledia 114.3mm ,thickness 5.4mm, length 5090mm" , kao-wool packing (1"x 2 ft x 25 ft) , tapper lock bush & adapter (alloy steel) , "pressure relif valve 20mm for los working pressure 5kg/cm2make- corona or equivalent" , 50 mm gun metal valve thread connection for los working pressure 5kg/cm2 , hot end air sealing housing assembly alongwith aluminum seal assy and fasteners , hot end tracking spool assembly alongwith adjuster rods , aluminum straight edge for radial seal setting , cold end spool assembly , pin and rack assembly , 25 mm gun metal valve thread connection for los working pressure 5kg/cm2

By Cities

By States

By Agencies

By Ownerships

By Sectors