Aluminium Scrap Tenders

Central Government/Public Sector

CTN :45475154

07 Jul, 2026 30.00 Lacs

Gwalior - Madhya Pradesh

Tender For corrigendum : repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and get

CTN :45738001

11 Jul, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of inch l , micro meter changeable anvil 0 to150 mm , measuring tape steel 3000 mm , precision file square with handle 8 inch comma 2nd cut , precision file half round with handle 8 inch comma 2nd cut , set of hand tap , chest comma tool feet j feet , gauntlets prospective welder leather , brushes steel wire 32 mm , portable welding machine , launch into 431 pr03 with hdiii car or truck , mahindra garuda ii i smart diagnostic tool , jaltest by cajoli ottw off highway equipment diagnostic tool 12v plus 24v , jaltest by cajoli cv truck comma bus comma light commercial vehicle 12v plus 24v , garuda 2vc1 professional grade comma j2534 compliant diagnostic tool for tata cv bs3 comma bs4 comma bs6 , cummins diagnostic tool inline 7 , jcb e into cavator construction diagnostic scanner electronic service tool with diagnostic , banjo washer aluminium , cotton waste , anabond red , o clamp 10 mm , emery paper rough or fine , banjo belt , banjo union , hose pipe 10 mm fle into ible , m seal , araldite big 90 gm , wd 40 rust remover , o ring set o size , valve grinding stick , valve grinding past rough or smooth , battery lead positive and negative , battery terminal h by d positive , battery terminal h by d negative , battery led pb for pole , battery thimble h by d , welding rod , flu into for gas welding , gas welding brazing rod 2 point 5 mm into 450 brass , gas welding brazing rod 2 point 5 mm into 450 aluminum , hand gloves leather , shoes for welding , welding appron leather , electeric holder heavy duty 100 ampere , welding cable copper 28 point 59 mm , stainless steel welding tong , aceteylene regulator , o into ygen regulator , torch with nozzle , supreme high pressure gas welding blow pipe , hose aceteylene gas cly , hose o into ygen gas cly , welding cutter blade size 107 into 1 point 3 into 16 mm , injector stage 3 tool kit , torque wrench , torque wrench digital small , bearing puller , mech jack chassis 10 ton , hydraulic jack chassis 10 to 15 ton , bailey plate jack 3 to 4 ton , magnet stick , ultrasonic cleaner , e-star socket and bit socket set , oil drip tray pan , pneumatic transmission oil filling tool with adaptor , heavy duty socket , vice bench heavy duty , dc test lamp digital automatic circuit tester , stanley 94 to 181 comma 150 piece high quality multi tool kit comma containing spanner comma driver sockets bits comma wrenches , vice bench small size , gauge chisel 38 mm , firmer chisel 26 mm , mortise chiesel 12 mm , combination ston , claw hammer , jack planer , pincer , planer machine , portable rotter machine , side cutting paier , circular saw blade 6 inch three square engineer scrapper with handle 100mm, chisel cold flat 25 mm x 200 mm, chisel 6", 9", hammer engineer's ballpin 400 gm, gauge thickness feeler type 0.03 to 0.5 mm, plier circlip external straight nose, plier circlip internal straight nose, spark plug socket 16 mm, spark plug socket 21 mm, hexagon socket head 0.5 inch square drive 10 mm to 32 mm, master tool kit 150 pcs , recersible rachet 0.5 inch square drive 250 mm, torque wrench 0.5 inch square drive 200 mm, allen key long ball point 10 mm, pad lock, pop spanner 6 x 22 mm, pop spanner 15 x 41 mm, nose plier 8", cutting plier 12", adjustable 12', file flat 6", 12", half round file 6", 12", round file 6", 9", 12", star screw driver 6", 9", 12", oil filter remover, torx key t30, injector remover socket 19 mmfor tata 697 bs iii & 497 bs ii, needle file set r, t & p, hammer electrician 200 gm, clamp on multi meter, digital multi meter, continuity tester, hexagon socket head size 6 mm to 42 mm, spinner handle 0.5 inch square drive, //bid details 2 / 91

Central Government / Public Sector

CTN :45702506

06 Jul, 2026 NA

Multi City - Telangana

Tender For auction sale of rolling stock - coaches -scrap cond. under aged/over aged bg 8 wheeler icf/rcf coaches 15 nos without wheel sets cum trolley and r.c items .coach nos. 1] 021014 accn rcf sc scr, 2] 997328 gs scr, 3] 047404 gs sc scr, 4] 047409 wgs sc scr, 5] 037230 wgscn sc scr, 6] 997241 wgscn scr, 7] 031108 wgaccn sc scr, 8] 997636 wgscz scr, 9] 994133 wgscn scr, 10] 997431 gs scr, 11] 047028 wgfcwc sc scr, 12] 97494 gs rcf, 13] 96271 cn rcf, 14] 047609 wgscz sc scr, 15] 007217 gs scr. ds-8 nos 013328-26-00291, 00302, 00297, 00296, 00294, 00293, 00292, 00298, 00290, 00299, 00295, 00289, 00288, 00300, 00301 dt.16.04.2026. total weight of 15 coaches. 365.13998 mt approx. [fe-312.29458 mt approx, aluminium-6.7312 mt approx., stainless steel -20.5732 mt approx, copper- 0.041 mt approx, decolumns, compreg sheet, wool and limpet, berths seats and rexene -25.5 mt approx]. loc. lying on the ground 13 coaches at kzj yard and 02 coaches on track at sick line kzj. note- [1] free delivery period of 80 days is approved by cmm/t vide note no.6 dt.2/06/2026 in e-file no.559446. 2] the purchaser is instructed to remove all debris arising from cutting of the lot purchased, from the cutting/loading spot and keep the delivery spot neat and clean before the final lorry delivery, failing which, the final lorry will be stopped. 3] the purchaser is strictly instructed to stack all the rc items at one location well away from the cut-up parts of the coaches and the custodian is advised to lift the same on the day of delivery affected. [before affecting/commencing/starting of the delivery itself]. 4] the purchaser is responsible for providing adequate safety firefighting equipment on the spot at the time of cutting and delivery. the purchaser shall be liable to make good any damage/loss caused to railway property during cutting or delivery. 5] railways are not responsible for any shortage. 6] any reclaimable items found in excess to the below, at the time of cutting and delivery of coaches should be returned to railways. 7] berths available in coaches are also part of the lot. 8] it is a advised that all witnessing officials has to sign the noc at the time of closing delivery order. 9] any concealed cables and items found at the time of gas cutting the same should be returned to railways.10] while loading the material cut up parts has to shift crossing two dead line tracks.11] bronze wearing pieces of all the 13 coaches which are grounded were removed and kept in the custody of custodian. in two coaches 047609 wgsz sc and 007217 gs scr they are in intact which can be seen after coach cutting.12] 13 nos coaches rc items are removed as per l no. cb and uf/stores/18ma dt.22.12.2025 and 24.12.2025. 13] sse cnw kzj to take care the rc items while cutting the coaches by the firm not to damage. 14] while loading material cutup parts has to shift crossing two dead line tracks.15] cutting is permitted. delivery by number basis pl no. 98111061. hsn code 72042910. available under sse cnw kzj, state tg.

Central Government/Public Sector

CTN :45702805

01 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no wc-07001fac/icf note : - 1 advance handing over of coaches for cutting may be allowed. 2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 16 mt approx.) s.b.lot no. bpl/crws/26-27/cond. coach/15/0068 restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45702806

01 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decoram, non-ferrous & restricted items will not be delivered) coach no 1-wc-910037 art/beml2-wc -920016 art/beml 3-wc-910036 art/rcf note : - advance handing over of coaches for cutting may be allowed. 2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 48 mt approx.) s.b.lot no. bpl/crws/26-27/ cond. coach/15/0069 restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc. note: delivery will be made on actual nos basis.

Central Government/Public Sector

CTN :45702846

03 Jul, 2026 NA

Jabalpur - Madhya Pradesh

Tender For auction sale of others - scrap non ferros brass items consiste of defective & worn out smgr, pipeline adapter, plunger, coupling vcb gauge, smgr cylinder cap, mg/6/6 valve, mg 4/4 valve, connection rod, control block, gun metal valve, aluminium bus bar )n type, o type, p type) connection link, arching horn, phge middle piece, phgr cylinder, smgr cylinder top cap, defective worn out isolating 3 way cock hom, three way ball valve acb dj part, clamp for terminal base & brush holder for hitachi tm, brush holder insulator for hitachi tm, smgr pipeline, smgr cylinderical cover, smgr piston rod, rps fuse putti, rps fuse link patti, hrc fuse 100 amp link, hrc fuse side link, hrc fuse side plate, strainer, legris cock, wsm tank, smgr push rod, hom isolating cock, rps fuse, mph impeller, cp safty valve, pantograph push rod end & differents brass part of equipment with or without ms attachment released from ac loco. weight= 1.571 mts (brass= 1.4544 mts, copper= 0.0234 mts, ferrous= 0.092 mts, insulation= 0.0017 mts). for custodian information ss-11 no. nkj/trs/scf/26-27/10 dt. 01.06.2026. ds-8 note no. 020725 dt. 01.06.2026. mode of delivery by actual weight only. (remark- 1. sale condition "as is where is basis" & uniform sale condition for e-auction is applicable. 2. the purchaser of the awarded lot are advised not to wait for last date of fdp considering the forthcoming mansoon season. all efforts should be made to lift the lot as early as possible.)

Central Government/Public Sector

CTN :45701696

15 Jul, 2026 NA

Bhusawal - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap condemned (ms low melting) consisting of ms cutting pieces, cut pieces pipes of material air filter,fire extinguisher, ms cattle guard solid and broken condition, various type sort and sizes & pneumatic pipe lines, cock valves, brake shoe, gear ring, pin, truck steering movable part, bush, universal joint, loose starter parts, clamp loose parts, gear, pressure plate, clutch plate, loose parts truck and moblie crane, jombo truck cover, gear box,steering base,and rod, etc. (non loco parts released from mw ii section) ms sheet, msr broken parts,condemned cup board (almirah), matrial rack,loco driver's seat, with miner ss attachments, ms chairs, tables, boards, bucket, gear case , screw coupling, brake liner, msu parts, nut bolts, voasher, ms patti,cp parts, rim, ms jali,ms bearing cover, rods, stopper, ms angle, cock, ms bearing, siling wire rope, mvmt,ocb dom,blore, locuker,air tank, air reservoir, various types and broken ms parts and miscellaneous items with or without loco and non-loco items with minor ss & aluminium or rubber attachments if any, in sort and sizes released from different sections as well as from electric locomotives. location scrap yard elw /bsl qty.30 mts approx

Central Government/Public Sector

CTN :45702769

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s tools scrap such as double end spanner, adjustable spanner, die spanner, monkey spanner, ring spanner, t spanner, box spanner and all types of spanners, allen keys, cutting pliers,handoperated oil pump, screw driver, hacksaw frame & blades,hand cuffs,cash chest,hammer ball,hardness tester,, slege hammer, nose pliers, pipe wrench,ball pen hamer,cutting piler,chisel long/short,torque wrench,electrical tools, instruments, gauges with or without wooden handles,adjustable tie rods,allenkeys.allen bolt bor lhb,double leg chain,flat file,high tensile bolt,hydraulic nut,hallow adopter for dm,hand hoe,shovel,adjustable tie rod,ratchet type torque wrench,single pully block,motor pan iron,fth pipe,carbide tipped tools,steel lettr punch, pulllift,allenkey,allen socket,box spanner tubular and other,foot ruler,measuring tape,open jaw spanner,ring spanner,ratchet box,spirit level,screw driver,screw fixing cgr,vice grip plier,pulley block single sheave, hand operated pulling and lifting machine,grease gun,punches,hand crimping, bi hexagonal socket, water pump pliers, wrench coach double pliers, faring tool, hand barrel pump, hydraulic crippling tools,sledge hammer,pipe wrench, defective damaged iron tools,counter weight, , chisels,manual weighment tripod, pull lift with or without chain, weighing buds, tirfor, come along clamp, scale counter w/o nfs, torque wrench and all types of wrenches, augars, bearing puller,oil can,weight metric, iron plair, beater, crow and claw bars, mamooty,manual tripod weights, manual weighning scale, hydraulic pallet truck,ht vcb panel and lt panel released items, barrel pump, tommy bar,ratchet, tong smith, chiesel,hydraulic jack trolley, jig saw blade, circular saw blade, scissor, hooks, measuring canes, pneumatic riveting gun, drill sleeve, tool holder, inside, outside micrometres, all types of gauges,fire buckets,fire bucket stand, handle tap,platofrm trolley, grease gun adopter, spikes extractor, metric weight with handle, steel letter punch and all types of punches, all types of files, pulley puller , blower, hand driller of sorts and sizes and all other scrap tools received from different departments in ferrous nature with/without attachment of wood/plastic handle. pl.no. 98090616. custodian: cdms-rsf-gsd-per. note: 1) any aluminium/brass items or hss tools(drill bits/saw) found during delivery should be handed over to custodian. 2) empty barrels/boxes/containers, gi/any locks, electronic weighing machine, should be handedover to the custodian. location: (1)entrance of old rsf ward annexe,(2)old rsf ward annexe(rhs)

CTN :45703919

06 Jul, 2026 NA

Kinnaur - Himachal Pradesh

Tender For supply of puf panels 60 mm , puf panel 40mm , pre painted galvalume aluminum zinc coating gi based corrugated steel sheet 0 point 80mm , verandah cover with aluminium partitions with 5 point 5 mm thick plain glass , ismb , hollow iron , angle or flat iron or base plate , ms sheet , tmt bars , nut and bolt , upvc door , upvc window 1200 x 1200mm , upvc ventilators 450 x 300 mm , fire extinguisher ball 1 point 30kg , curtain rod of size 1 point 30 m , steel almirah , smart ortho mattress , foot scraper , iron foot mat , white cement , looking mirror , double bunks ms tubes , floor mounted hot and cold water dispenser , bed side table , puf tank 2000 ltrs , plastic dustbins , stainless steel shoe rack , sealing material , laminated wooden floor , tactical heater diesel based , solar light , septic tank 3000 ltrs , ordinary portland cement , coarse sand , stone aggregate 20mm , stone aggregate 40mm , stone aggregate 10mm , vitrified tiles , non skid tiles , stone aggregate 63mm , mcb distribution board db 12 way , mcb sp 32 amps , mcb sp 16 amps , mcb single pole 100 amps , mcb sp 10 amps make , lt panel feeder box , die casted bulk head 8 watt , 16 amp modular switch and socket combination , 16 by 6 amp modular switch and socket combination , modular piano switch 6 amp modular switch , modular piano switch 16 amp modular switch , 16 amp modular socket , modular gang box 12 way , modular gang box 06 way , modular gang box 04 way , modular gang box 03 way , led tube light fitting 4 feet , led tube light fitting 2feet , electric geyser 25 ltr , wire flexible , 1100 v grade frls , pvc insulated unsheathed copper cable 4 sq mm , 1100 v grade pvc insulated pvc , pvc insulated unsheathed copper cable 6 sq mm , earthing , lightening arrester , gi screw 8 mm x 45 mm full threaded 500 nos , gi screw 8 mm x 25 mm full threaded 500 nos , gi screw 8 mm x 75 mm full threaded 250 nos , pvc insulation tape 19mm , cp bib cock 15 mm , cp pillar cock 15 mm , cp stop cock 15 mm , cp soap dish , cp towel rail 24 mm dia 600 mm , vitreous china ceremic floor mounted anglo indian water closet toilet seat , vitreous china bowl urinal flat back , ss garting 100mm dia , vitreous china wash hand basin , cp health faucet with fixing screw , pvc pipe 110 mm , pvc y by t junction 110mm dia , pvc socket 110 mm , pvc swr bend 110mm , pvc floor trap 75mm , pvc pipe 75mm , pvc elbow 75mm , pvc door bend 75 mm , pvc bend 75 mm , pvc shoe bend 75 mm , pvc t 75mm dia , looking mirror 450 x 600 mm , sealing thread

CTN :45694806

16 Jul, 2026 NA

Kolkata - West Bengal

Tender For tender for supply of tender for the job of modification of admin building at durgapur lpg plant -dismantling brick masonry or reinforced brick masonry , dismantling of existing old deteriorated plaster , dismantling doors , windows partitions including chowkhats architrave holdfasts complete and stacking , providing 15-20 mm cement plaster of specified mix , providing and wiring wire pvc pipe gi box switch socket , providing and fixing modular switch socket , providing and fixing 15w led panel light , providing & fixing 9 6w led spot cob light , providing and fixing made out of 8mm thick float clear glass , providing and fixing 12 mm thick gypsum board with gi channel , supplying and placing in position of location incharge table , providing and fixing of bwp 710 grade ply , providing and fixing of bwp 710 grade ply using 19mm for framework and shelves , providing and fixing of bwp 710 grade ply using 19mm for framework and shelves , providing & fixing 3 inches thick solid partition for made up of 18 gauge 50x25 mm aluminium section , providing and fixing fully glazed door shutters , floor spring installation with glass door. , supplying fitting & fixing of centre table , supply and placing in location fully upholstered sofa , scrapping and removing the existing loose paints scales cleaning the surface thoroughly , decorative wall fluted mdf panelling , supplying fitting & fixing of window blinds as approved make , supplying fitting & fixing of wall fan , supplying fitting and fixing of logo of bpcl , dismantling of existing old deteriorated plaster , dismantling doors , windows partitions including chowkhats architrave holdfasts complete and stacking , providing 15-20 mm cement plaster of specified mix , providing and wiring wire pvc pipe gi box switch socket , providing and fixing modular switch socket , providing and fixing 15w led panel light , providing & fixing 9 6w led spot cob light , providing and fixing made out of 8mm thick float clear glass , providing and fixing 12 mm thick gypsum board with gi channel , supplying and placing in position of workstation table , providing and fixing of bwp 710 gradeply using 19mm for framework and shelves , providing and fixing of bwp 710 gradeply using 19mm for framework and shelves , providing & fixing 3 inches thick solid partition for made up of 18 gauge 50x25 mm aluminium section , providing and fixing fully glazed door shutters made out of 12mm thick toughened clear glass , floor spring installation with glass door , supply and placing in location fully upholstered sofa , scrapping and removing the existing loose paints scales cleaning the surface thoroughly , supplying fitting & fixing of window blinds as approved make , supplying fitting & fixing of wall fan , dismantling brick masonry or reinforced brick masonry , dismantling doors windows partitions , providing 15-20 mm cement plaster of specified mix , providing and wiring wire pvc pipe gi box switch socket , providing and fixing modular switch socket , providing and fixing 15w led panel light , providing and fixing made out of 8mm thick float clear glass , providing and fixing 12 mm thick gypsum board with gi channel screw pvc tape , providing and fixing of bwp 710 gradeply using 19mm for framework and shelves , providing and fixing of bwp 710 gradeply using 19mm for framework and shelves , providing & fixing 3 inches thick solid partition for made up of 18 gauge 50x25 mm aluminium section , providing & fixing 12mm thick toughened glass partition with high quality aluminium profile , providing and fixing fully glazed door shutters made out of 12mm thick toughned clear glass , floor spring installation with glass door , scrapping and removing the existing loose paints scales cleaning the surface thoroughly , supplying fitting & fixing of wall fan

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector