Bearing Tenders

State Government

CTN :41401842

14 Aug, 2025 NA

Kangra - Himachal Pradesh

Tender For construction of 35.00 metre span bridge over banoi khad at km 0/300 on link. road ruhru to narghota km 0/00 to 1/500 (sh:- investigation of soil bearing capacity of bridge) abutment-1

State Government

CTN :41401843

14 Aug, 2025 NA

Kangra - Himachal Pradesh

Tender For construction of 35.00 metre span bridge over banoi khad at km 0/300 on link road ruhru to narghota km 0/00 to 1/500 (sh:- investigation of soil bearing capacity of bridge) abutment-11

State Government

CTN :41333626

29 Aug, 2025 2.18 Crore

Udaipur - Rajasthan

Tender For corrigendum : purchase of various testing major apparatus (lab equipment) in quality control labs under zone ajmer, bikaner,udaipur-i and udaipur-ii - fully automatic servo controlled compression testing machine (ctm)-3000 kn capacity with additional load frame of 500 kn capacity & flexure frame of 100 kn capacity:- supplying, fixing and commissioning of fully automatic servo controlled compression testing machine (ctm) of 3000 kn capacity which should be capable of conducting compression test on concrete & mortar specimens and allied products as per is : 516 & is :4031 (part-6). the machine should be power operated with servo controlled motor capable to apply the load continuous by without shock and there shall be large enough space provided for test specimen to accommodate in a readable position. machine shall have good load control and capable of applying the load at the specified rate, uniformly with automatic control with percentage of error for load shall not exceed + 1.0% of the indicated load. the system shall have an arrangement for automatic placing system, which achieved by the combination of advance hydraulic and electronic system. the systems can be loaded in load, displacement or strain control basis. complete machine unit shall conform to is: 14858-2000 and is: 9399-1979 and as per direction of engineer in charge. the salient features and technical specification of the machine shall be as under :- i) ctm-3000 kn machine loading frame - four column high stiffness welded from with enough stabiility . - heavy duty mechanical platens with spherical seated block (vicker hardness > 550), bottom bearing, blocks, auxiliary plates (vh > 550) shall have flatness tolerance within 0.03 mm and squareness and parallelism tolerance within 0.06 mm wide.- base shall have fine finished servo controlled hydraulic cylinder with hardened and finest abraded piston. - frame with safety guard door and transparent fragment guard (both front & rear) (ii) hydraulic pumping system, it should be compact in design and suitable for the supply of required flow and pressure for the movement of the actuactor. it shall have oil tank of adequate capcity vane type pump powered by three phase motor. anti vibration mounting shall provided as standard along with the hps.iii) micro-processed (plc & hmi) based touch panel display & control system user friendly interface control system with application software shall provide the digital servo control, precise operation, ramp generation for the machine, data acquisition, storage, processing, analyzing and reporting etc for the continuous operation of the system.iv) technical specification of ctm (3000 kn) capacity -3000 kn, platen size 320 mm dia, ram dia 260 mm, ram travel 50 mm, vertical daylight clearance 350 mm, horizontal daylight clearance 370 mm, least count - 0.1 kn, pace rate controlling -1%, rate of loading 1.3 mm/min (when running idle), 0.14 to 032 mpa/sec (with specimen), motor capacity 3 hp (min), power supply (240v, 50-60hg, three phase.), capacity of oil tank 20 litre, max. operating pressure 210- 600 bars, flow of pump 2 & 4 lpm (duel speed) , auto stop & release of pressure when specimen failure, multi operation compression test up to 3000kn, up to 500 kn range and flexure test, accessories spacers- 4nos, controller unit auto pid operation with closed loop update rate of 10 khz to control pace rate automatically as programmed. start, stop & hold test system, load control 01kn/sec to 50 kn/sec., displacement control 0.01 mm/sec to 1mm/sec. load indication & control coloured touch screen display of suitable size, test report facility to print test report, export data to ms excel. auto internal calibration without proving ring, short circling protection overload safety cut off, piston over travel safety cut off- shall be made in addition to 3 kva 3 ph servo control stabilizer, technical specification of ctm (500 kn) load frame- capacity 500 kn, platen

State Government

CTN :41167716

19 Aug, 2025 4.03 Lacs

Birsinghpur - Madhya Pradesh

Tender For corrigendum : procurement of bearings for turbine auxiliaries a2 category for unit no. 1 to 4, at sgtps, mppgcl, birsinghpur.

Central Government/Public Sector

CTN :41396037

21 Aug, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of e9953015-double row self aligning radial ball bearing 2307 formachine no. 05/a/2142. fag, skf, nsk, , e9953015-spindle bearing -7932-ctynsul-p4 for machine no. 05/a/2142. ag, skf, nsk, ina, timken, rhp

Central Government/Public Sector

CTN :40290749

14 Aug, 2025 NA

Haridwar - Uttarakhand

Tender For bid to ras corrigendum : tender for supply of shims bering - set of 10 shims of thickness 0.5mm , material stainless steel , supplier - skf or equivalent , comm. code tmas , 75-050 (or equivalent). size pn-187667430 , radial spherical bearing doubled screened. fag or equivalent - 6006-2rsr. od-55 , id-30 , h-13. drg pn-187667154 rev 00 , ball bearing 62/28 supplier skf or equivalent. pn 187667258 dynamic load 16.8 kn static load 9.5 kn drg pn-187667258 rev 00 , radial needle bearing. dash number -rna 4906 rs. firm ina or equivalent. od-47 , id-35 , h-17. size pn-157667156 , ring for slot od-48.8 , t-1.5 commercial name-br47 supplier-torrington or equivalent. size pn-157667157 , sealing ring , product code dh 42x52x4 , supplier-torrington or equivalent. size pn-187667204 , set of 10 shims of thickness 0.1mm , material stainless steel , supplier - skf or equivalent , comm. code tmas , 75-010 (or equivalent). size pn-187667428 , set of 10 shims of thickness 0.2mm , material stainless steel , supplier - skf or equivalent , comm. code tmas , 75-020 (or equivalent). size pn-187667429

Central Government/Public Sector

CTN :41405153

01 Sep, 2025 NA

Malanjahknd - Madhya Pradesh

Tender For supply of 324300011 box gland material cast iron drg 236 83 , 324300012 shaft sleeve as per drg no 68 82 , 324300013 gland housing as per drg 393 85a , 324300014 lantern ring as per drg 56 82 nabl , 324300015 shaft along with distance ring 2nos lock nut and key as per drg 396 85 ndt , 324300021 deflector ring as per drg 601 87 , 324300064 shaft sleeve moc ss 304 as per drg no 1357 08 nabl , 327500014 bearing holder as per drawing 1524 2022 nabl , 327700018 shaft having moc stainless steel grade 410 as per drg 238 83 ndt , 327700022 shaft sleeve drive side part no 310 as per drg no 239 83 , 327700112 casing ring suction side moc cf8m as per drawing 1525 2024 nabl , 327700113 casing ring moc cf8m as per drawing 1525 2024 nabl , 327700114 impeller ring moc cf8m as per drawing 1525 2024 nabl , 327700115 impeller ring suction side moc cf8m as per drawing 1525 2024 nabl , 328400005 hub stuffing box for morris pump as per drg 512 86 nabl , 328400007 shaft sleeve as per drawing mcp conc 91 83 , 328400009 shaft for morris pump along with bearing lock nut and lock washer as per drg no 312 84 ndt , 328400017 seal cage moc bronze as per is 318 2006 grade 1 as per drg 953 94 nabl , 328400018 thrust bearing housing as per drg 624 88 , 328400022 radial bearing retainer as per drawing 1069 99 , 329800003 upper screen drg no 967 95 , 329800007 shaft 48 r 6 as per drg no 447 85 sl no 1 ndt , 329800008 shaft 60 r 6 as per drg 447 85 sl 2 ndt , 329800014 lower bearing cap as per drg no 853 92 , 329800015 upper bearing cap as per drawing 854 92 , 329800020 spares for wilfley pump model m frame protecting as per drg 189 83 , 329800024 spares for wilfely pump model m short cyl head m21 as per drg 188 83 , 329800025 short cylinder k 21 as per drg 348 84 , 329800028 shaft along with two numbers of bearing locknut lockwasher and key as per drg 98 83 ndt , 329800033 sleeve for check valve assy as per drawing 558 87 , 329800072 sala froth pump shaft 180331 as per drg 1174 02 ndt , 329800080 shaft sleeve as per drawing 1503 19 nabl , 329800083 lantern ring as per drg 1502 20 nabl , 371600008 stand pipe bell for 300 cft cell as per drg hcl mcp 184 83a , 371600013 shaft as per drg 581 87 ndt , 371600014 bottom liner for 300 cft cell as per drg 569 87 , 371600015 bottom liner for cell tank as per drg 570 87 , 371600020 grill frame type a as per drg 727 90 , 371600023 spindle with round nut as per drg 1103 2k nabl , 422400002 trommel screen with flights cw as per drawing 487 85 //bid details 2 / 36

Central Government / Public Sector

CTN :41400706

20 Aug, 2025 NA

Hyderabad-T - Telangana

Tender For supply of direct mounted double row self-aligning spherical roller bearing no. 22328 c/c3 of size 140 dia. x 300 dia. x 102 mm for 20. 32 ton axle load capacity confirming to rdso spec. no c-8527 (rev.1) with amendment nos.1 to 4. with guarantee as per para 3.3. of rdso spec. no. c-8527 (rev.1) with amendment nos.1 to 4. packing condition : packing shall be as per rdso spec. no c-8527 (rev.1) clauses 18.1 to 18.1.5.

Central Government And Public Sector

CTN :41398501

02 Sep, 2025 3.60 Lacs

Trivandrum - Kerala

Tender For supply of rewinding , capacitor , bearing , regulator , shifting , clamp , light , tube , fixing , led , holder , 3x1.5 , 1x25 , casing , 4x16 , hrc fuse , pvc box , repair , exhaust fan , manpower , dismantling , pump , downrod , switch , socket , db , mcb , isolator , 4 pole mcb , frls conductor , pvc conduit , termination , modular , wiring , gi wire , copper wire

corporations/Associations/Others

CTN :41388377

28 Aug, 2025 7.48 Lacs

Ahmedabad - Gujarat

Tender For tender for supply of column pipe and thordon bearing with sleeve for vertical turbine pump of cwph of raska water works of water production department

By Cities

By States

By Agencies

By Ownerships

By Sectors