Benches Tenders

Corporations/Associations/Others

CTN :45532318

09 Jul, 2026 19.50 Lacs

Kanchipuram - Tamil Nadu

Tender For corrigendum : repair and maintenance work of foot path and light arrangements,eb board,play materials and name board works in tnhb p-iii park at ward no.33 zone -4 in tcmc - eangaging of man power for cleaning weeds and bushes at lawn areas cutting plants and grass including all labour charges etc complete, gardener 5 days 6 nos, mazdoor ist class, engaging of ac electric grass cutter on hire basis including hire charges transport charges and all labour charges etc complete, supply and fixing of childerns play materials including cost and conveyance and fixing and proper alingenement charges etc complete, slider, 2 seater swing, 4 seater see saw, supplying and filling in foundation and basement with river sand in play area in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification., supply and fixing of light pole 4 metre length single bracket pole with base plate (250 x 250 x 6mm)76.10mm od x 3.65mm thick x 4000mm length etc.,completed, supply and fixing of 30w led street light fitting with led on out door fittings including cost and conveyance and fixing charges etc complete, supply and fixing of synthetic moulded compound box for street light with 16 a mcb and connecterincluding cost and conveyance and fixing charges etc complete box-735+16 a mcb sp and neutral -382, supply and fixing of 4 sqmm pvc unsheathed copper cable including cost and conveyance and fixing charges etc complete , supply and laying of 2 x 10 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good sd 194, centering and shuttering charges for all pcc and rcc works using ms steel moulds and soffits strutting with casurina props 10-13 cm dia including cost and conveyance of all materials and including all labour charges etc complete, plain cement concrete 1;2;4 mix using 20 mm hbg iss metal including cost and conveyance of all materials and including all labour charges etc complete, supply and filling of on quarry rubbish 15 cm thick on each layer including cost and conveyance and all labour charges for filling and consolidation charges etc complete, cement concrete 1:5:10 (one cement, five crushed stone sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard speci cation and as directed by the departmental of cers. -mixing by manual means, paving the oor with pre-polished concrete anti-skid tiles (required shape and design) of 20mm thick of approved quality and colour laid in accordance with is 1443 over a cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required cement slurry and mortar plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 kg. / sq.m., curing, etc., complete complying with standard speci cation and as directed by the departmental of cers. (the make and brand of the tiles should be got approved by executive engineer before use on works), supply and fixing of m.s grills with doors and windows with one coat of red oxide with primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification., supply and fixing of stone bench including cost and conveyance and fixing and proper alingenement charges etc complete, supply and delivery of ms kiosk of size 0.75m x 0.45m x 0.75m made up of ms angle of size 50mm x 50mmx 4mm alround covered with 16 gauge ms sheet and kiosk door made up of ms plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,(twad sor 2025-26 unicode wd-m1471 clau

State Government

CTN :45305483

13 Jul, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : supply of various types of tools & tackles and miscellaneous items for day to day maintenance works for tmd-ii gtps. - fevi kwik tube 3 grams, anabond rtv silicone 666, packing : 100 gms. for gasket sealing, metal cutting wheel (for stainless steel) size 105 x 1.2 x 16 mm., grinding disc (wheel) size 100x4x16 mm, mos 13750 high cut (a.36) ., mini angle grinder 100 mm, rust removing spray wd-40 in aersole packing of high pressure valves ., pipe vice no.6 size 12 mm to 150 mm, bench vice apex make -150 mm (6"), bench vice apex make -200 mm (8"), gi nipple 15 mmx4 long for civil work, gi nipple 1/2" x 2" long for civil work, gi nipple 1/2" x 3" long for civil work, washing powder ( 1 kg pack ), instametal (0.5 kg/pack), grinding stone (smooth) for 6"(dia.) bench grinder wolf., grinding stone (rough) for 6" bench grinder wolf, pipe wrench size 18" (450 mm) length, heavy duty pipe wrench size:24", heavy duty pipe wrench, length -200 mm, least max opening-33 mm, taparia product no- hpw 08, heavy duty pipe wrench, length -250 mm, least max opening-48 mm, taparia product no- hpw 10, white welding glass size 3.1/4"x4.1/4", atharmal (gremany) make dark green welding glass size:4 1/4x3 1/4 shed 11a 1 din, two stage two gauge oxygen gas pressure regulator - model no : dura 0-10 - esab make, two stage two gauge acetylene gas pressure regulator model : dura a-1.5 - esab make, welding electrode holder fully insulated 600 amp. current (hc 600) , make-esab., esab earthing clamp, cutogen-5 cutting blow pipe (cutting torch), esab/iol make gas heating torch, oxygen gas hose pipe blue 08 mm, make esab/dura., acetylene gas hose pipe red 08 mm, make esab/dura, cutting nozzle size 1/16", cutting nozzle size 3/64", needle file set jk make, taparia chisel 10" long, taparia flat chiesel 1046 150 mm length, hole punch set having 4 to 32 mm dia size, araldite 180 gram/tube, nylon braided pvc hose pipe suitable air/water handling ;at working pressure of 10kg/cm2 size-20mm, nylon braided pvc hose pipe suitable air/water handling ;at working pressure of 10kg/cm2 ,size; 12mm, nylon braided pvc hose pipe suitable air/water handling ;at working pressure of 15kg/cm2 ,size; 25mm id.

State Government

CTN :45739718

21 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of damper test bench , customised hydraulic press & fixture , damper overhauling special tools set

Central Government/Public Sector

CTN :45737788

21 Jul, 2026 10.16 Lacs

Subansiri - Arunachal Pradesh

Tender For supply of landmine platform sets , olympic barbell 15 kg , olympic barbell 20 kg , height adjustable flat bench , 5 kg weight plate , 3 kg weight plate , 2.5 kg weight plate , 1.5 kg weight plate , 2 kg weight plate , dumbell 5 kg , digital timer , boxing ring

State Government

CTN :45720713

15 Jul, 2026 2.50 Lacs

Satna - Madhya Pradesh

Tender For supply of materials for carpentry industry (volume 01) - paper tape (branded/high quality) (as per sample), welding rod (branded/high quality) (gauge 8, gauge 10), nails – gauge 14, 17, 20 (branded/high quality) (1 to 4 inches), yellow clay, chalk clay (branded/high quality) (1 kg pack), plastic cane (for chair making) (branded/high quality) (as per sample), chandras (good variety/high quality), nc thinner (branded/high quality) (5-liter can), sandpaper, 4-inch (branded/high quality) (grade 80/100), turpentine oil (branded/high quality) (1 kg packet), paint (all colors) (branded/high quality) (1-liter pack), water-based paint (all colors) (branded/high quality), oil-based paint (all colors) (branded/high quality), brush (sizes 0 to 12) (branded/high quality), brush (branded/high quality) (4-inch), handsaw (16-inch) (branded/high quality), triangular file (4-inch) (branded/high quality), plywood 12 mm (branded/high quality) 4x8, plywood 18 mm (branded/high quality) 4x8, plywood 8 mm (branded/high quality) 4x8, plywood 6 mm (branded/high quality) 4x8, sunmica (1 mm) (branded/high quality) 4x8, sunmica (0.8 mm) (branded/high quality) 4x8, iron angle/iron strip (branded/high quality) – as per size, metal cutting blade (branded/high quality) 14-inch, metal cutting blade (branded/high quality) 4-inch, nuts, bolts, and washers – all sizes (branded/high quality) (as per sample), foam 3", 32 density (3x6) (branded/high quality), foam 2", 32 density (3x6) (branded/high quality), foam 1", 32 density (3x6) (branded/high quality), sofa fabric/rexine (branded/high quality), grinder disc/stone (no. 120, 140) (branded/high quality), putty (1 kg pack), wood cutter circular blade (branded/high quality) 10-inch, gi wire (branded/high quality), broom sticks (30-inch) (good/high quality) solution (sr 505) (branded/high quality) (1 kg packet), welding goggles (black/clear) (branded/high quality), measuring tape (branded/high quality), drill bit (good quality/high quality), wooden block (good quality/high quality), teak wood (good quality/high quality), acacia (babool) wood (good quality/high quality), sheesham wood (good quality/high quality), firewood (good quality/high quality), sealer (1 kg packing), wood touch-up/filler (1 kg packing), sandpaper (grit 120, 100) (good quality/high quality), electric planer (size-specific) (branded/high quality), straight edge/siknja (3 feet) (branded/high quality), bench vice (large size) (branded/high quality), hand drill machine (600 watt) (branded/high quality), compressor gun (500g, 200g) (branded/high quality), compressor hose/pipe (branded/high quality), planer machine moulding die (all sizes) (branded company / best quality)

State Government

CTN :45720726

15 Jul, 2026 3.50 Lacs

Satna - Madhya Pradesh

Tender For materials for the sewing industry (section 02) - paper tape , welding rod , nails (nos. 14, 17, 20) , yellow clay, chalk clay , plastic cane (for chair weaving) , chandras (shellac resin) , nc thinner , sandpaper (4-inch) , turpentine oil , paint (all colors) , water-based paint (all colors) , oil-based paint (all colors) , brush , brush , saw , triangular file , plywood (12 mm) , plywood (18 mm) , plywood (8 mm) , plywood (6 mm) , sunmica (1 mm) , sunmica (0.8 mm) , iron angle, iron strip , metal cutting blade , metal cutting blades , nuts, bolts, and washers (all sizes) , foam (3-inch, 32-density) , foam (2-inch, 32-density) , foam (1-inch, 32-density) , sofa fabric/rexine , grinding wheel , putty , brush cutter (circular blade) , gi wire , broom sticks , adhesive (sr 505) , welding goggles (black/clear) , measuring tape , drill bit , wooden block/batten , teak wood , acacia wood , sheesham wood , firewood , sealer , wood touch-up/finish , sandpaper , electric planer , c-clamp , bench vise , hand drill machine , compressor gun , compressor hose , planer machine molding die , sewing machine oil , nylon shirt buttons , hand sewing needles , sewing machine needles (10 pieces per packet) , sewing machine treadle/pedal , tailor's chalk , thread reels , amela machine bobbin case , sewing machine needle plate , scissors (size 08, 10) , sharpening stone , sewing machine , overlock machine , embroidery threads , embroidery frame , macramé cord (cotton, polyester, nylon, jute) , poly master , tree rope , stapler pins , white paper (80 gsm) , laser paper (green, 80 gsm) , white paper (68 gsm) , white paper (68 gsm) , ruled paper (68 gsm; ream of 1000 sheets) , ruled paper (68 gsm) , white paper (57 gsm) , brown paper (80 gsm) , card sheet (165 gsm) , cardboard sheet (no. 32) , rin/surf excel laundry soap , coating , fevicol , winding thread , winding cloth , fount solution , brown tape , screen printing ink , decoter , german sponge , reducer , winding paper , synthesizer , yellow envelope paper , stapler gun , winding paper , colored paper (70 gsm) , annual contract section , picking wall fiber , pickers , ratchet catch (leaf set) , pressing cam lever lr-101 , wooden steel (no. 29) , wheel gear 14t (no. 62) , bevel gear , worm wheel stud , ratchet catch lever , buffer soldering bracket , buffer strap (leather) , stick cap , bearing , ratchet wheel , warp weaver , worm , parachute rope , fine belt , picking stick , tariff wheel , handloom pickers , fast dyes (for fabric) , powerloom steel reed , yarn 2/40s on cone (coloured/white) , yarn 6s on coloured cone , coloured wool , yarn 2/60s on cone (coloured/white) , jute fabric , yarn 6s on cone , handloom reed (no. 12) , warping machine brake belt (leather) , dari beater/comb (wooden) , emery strip , warp frame hook set , pick/bobbin filling rod (handloom) , cast iron welding rod , temple rod/cover , weft filling needle/hook

State Government

CTN :45733080

10 Jul, 2026 NA

Pune - Maharashtra

Tender For construction of math's lab room of size 30'x20 with 9'wide covered verandah, construction of art & craft room of size 30'x20 with 9'wide covered verandah, construction of pcc and paver block in car parking near main gate (16650sqft), renovation of science labs (phy, chemistry & bio labs) (02 jobs), construction of visitor's room in sec wing 20'x 17'with 9'verandah in front (01 job), constr of 02 nos classrooms at secondary wing of size 30'x20'with 9'wide covered verandah, purchase of benches and desk for class rooms (200 nos), renovation of class rooms (02 nos)f block, renovation of class rooms 02 nos) near f block and 01 music room (01 job), renovation of adm office sec wg with wall mounted cabinets, storage optimizers and civil works (01 job), 75"interactive panelwith ops (14nos), 5kva sinwave inverter for primary & secondary wing for cctv backup and new comp lab (02 nos), new cctv camera with 32 channelnvr (for pre primary)25 cam for outsides of washrooms corridors and new classrooms (31nos), standee digital display panels 55"portrait 4k(7'height) (03nos), painting of school buildings class room with distemper alongwith wooden and steel surface (job 01).

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

Central Government/Public Sector

CTN :45726566

20 Jul, 2026 43.45 Lacs

Nicobar Island - Andaman And Nicobar Islands

Tender For special repairs to joinery cupboards of building no p 91 provn of sittting benches in common areas at vijay baugh and provn of oem support complex behind electrical workshop at nsry svp under ge haddo sri vijaya puram

Central Government And Public Sector

CTN :45737736

21 Jul, 2026 NA

Kudankulam - Tamil Nadu

Tender For supply of commercial treadmill , commercial elliptical cross trainer , commercial upright bike , commercial spin bike , pin loaded seated leg curl or extension dual machine , 3 stack multi station commercial gym with optional leg press station , pin loaded multi presschest or incline or shoulder press , functional trainer or dual adjustable pulley , pin loaded pec fly or rear delt machine , pin loaded lat pull down or row dual machine , chin or dip or vertical knee raise or leg raise machine , pin loaded biceps curl machine , pin loaded seated leg press or calf extension machine , pin loaded inner or outer thighhip abductor or adductor machineadjustable cable cross over , adjustable cable cross over , olympic flat bench , olympic incline bench , olympic decline bench , multi adjustment bench , utility bench , back extension bench , preacher curl bench , dumb bell rack twin tier , olympic bar holder or barbell rack , olympic weight plate tree , fighting rope or battle rope , foam rollers , kettle bells set , medicinal balls , gym ball , resistance bands , solid rubberized dumb bell set , rubberized weight plates set , olympic bars set , olympic ez curl bars set , interlock floor mat * /bid number : gem/2026/b/7689839 + /dated: 30-06-2026 ' ' / bid document 1 / 43

By Cities

By States

By Agencies

By Ownerships

By Sectors