Bend Tenders

State Government

CTN :40138346

14 May, 2025 NA

Ranikhet - Uttarakhand

Tender For extension of kuna dhanyari motor road from basera bend to dhulaguth tipola in almora district

State Government

CTN :39497501

06 May, 2025 3.48 Lacs

Korba - Chhattisgarh

Tender For corrigendum : tender for high pressure welding of turbine side steam pipeline & bends of 4x210mw htps, korba west.

State Government

CTN :40125270

05 May, 2025 70.0 Thousand

Meerut - Uttar Pradesh

Tender For supply of polycarbonate seal - 1- seals should be made of high quality of uv stabilized polycarbonate plastic materials (engineering plastic), which shall give complete visualization of its fixing mechanism and shall show clear indication if tampered and it should not be effected by boiling water etc- the seal must be able to withstand harsh environment direct sunlight exposure.the seal will be tamper evident with double locking system with additional third locking system facility, which works when the double anchor system is put in place with the female part of the seal. the seal should be transparent clear. the seal should be of one- piece polycarbonate body consisting of capsule and double locking anchor having stainless steel twisted wire (two stained) of 20 cm long molded itself in the temper proof seal male part. the wire should be non-corrosive and nonmagnetic made of 304 grades. sequential serial nos. of one alpha and six numeric numbers to be provided on the female part. the seal should have high rise molded logo be embossed of purchaser and companys name one each side of the seal. the provision for tamperproof sticker signature in the field of13.5mm x 21.5mm should be given, as and when the purchaser requires the need for the same for its proper utilization. the sealing arrangement should be such that its original position cannot be restored after any effort of tamper or breaking of the seals. the third lock as said should work as deterrent for opening the main male & female part of the seal.packaging: the seal should be supplied in packet of 100 seals. each packet shall be labeled for following information., 1.1- the seal should have following essential features.a. tamper resistanceb. heat resistance c. environmentally safed. should withstand direct sun light & rain water exposuree. tamper evident: material must show clear sign of tampering when material is compromised by penetration, drilling cutting, bending or pulling etc.f. one end of the wire should be loose and other end of wire should be permanently fixed on the upper part of female body passing thru the male part of sealg. ultra violet ray resistant h. must have third lock to secure male & female part from tampering.the sealing mechanism should be such that it can be sealed without using any pliers or tools. the sealing procedure must be fool proof and there should not any scope of pre tampering/malpractice with sealing wire while sealing.above mentioned essential features of seal must be verified by approved laboratory test report including melting point test, boiling water test, temperature with stand test etc.construction: one piece construction comprising of polycarbonate capsule & anchor and integrally connected pin part lock & non corrosive & nonmagnetic 2 strand twisted stainless steel sealing wire, all these features molded into one piece {called seal}capsule: contains and internal locking mechanism which accepts the anchor and permanently secure the sealing wire.anchor: the locking cap shall have double anchors, which secures the loose end of the sealing wire into the capsule locking mechanism.pin lock: lt is molded in the seal at time of manufacturing of the said seal and passes. through female part and locks the male part and secures the seal at the operational level

State Government

CTN :40124038

09 May, 2025 NA

Bhusawal - Maharashtra

Tender For fabrication of high pressure boiler tube bends during shutdown and overhauls , as and when required basis at unit # 4 & 5 boiler in 2 x 500 mw bhusawal tps through open tendermode of procurement.

Central Government/Public Sector

CTN :40141511

16 May, 2025 6.00 Lacs

Bhadravati - Karnataka

Tender For supply of 3 by 4 inch cpvc pipe , 3 by 4 inch cpvc tee , 3 by 4inch cpvc elbow , 3 by 4 inch cpvc brass elbow , 3 by 4 inch cpvc brass tee , 3 by 4 inch cpvc brass ftr , 3 by 4 inch 1 inch cpvc reducer , cpvc 1 inch ball valve , bib cook plastic , angle cook plastic , wash basin 18 20 , wash basin piller cock , wash basin waste coupling steel , wash basin l angle , wash basin bolt nut 14 mm 3 inch , wash basin rock bolt , connecting pipe 24 inch , 2 in 1 angle cock , z gun with pipe , indian style toilet set , indian toilet long bend , flash tank , shower , shower stop cock , 3 by 4 inch clamp , black screw 2inch , steel nails 2inch , cpvc solution solvent cement100 ml , 1inch cpvc pipe , 1 inch cpvc elbow , 1 inchcpvc tee , 1 3 by 4 inch cpvc tee , 1 3 by 4 inchcpvc elbow , westrenstyle toilet , 3inchpvc pipe 1 length 20 feet , 3inchpvc elbow , 3inch pvc tee , 3inch pvc clamp , 3inch pvc collar , 2 and half inch pvc pipe 1 length 20 feet , 2 and half inchpvc elbow , 2 and half inch pvc tee , 2 and half inch pvc non drop with jali , 2 and half inch pvc clamp , 2 and half inch pvc collar , 2 and half 3inch reducer , 2 and half 4inch reducer , 4 inch pvc door elbow , 4 inch pvc tee , 4 inch elbow , 4 inch clamp , 4 inch collar , 4 inch pipe 1 length 20 feet , pvc solvent cement 100ml , sintex 1000 ltr , 1inch union cpvc , 1inch tank nipple , sintex flow top , mirror , soap dish , urinal bowl , urinal waste pipe , 3 by 4 inch clamp , axel blade bid number/ & ( * ) : gem/2025/b/6173069 dated/ + : 25-04-2025 bid document/ 2 2 1 / 52

Central Government/Public Sector

CTN :40031629

05 May, 2025 NA

Bokaro - Jharkhand

Tender For corrigendum : supply of wheel f coil car - wheel f coil car dwn s 7288 , spares of bottom p roll d s dwn hsm 6264 , spares of bottom p roll o s dwn hsm 6264 , transmitter plate f hgc cyl dwn hsm 9439 , fixing tension rod dwn 064 297 652 009 , packing plate f bending block 6442805005 , packing plate f bending block 6442805006

State Government

CTN :40130803

09 May, 2025 7.51 Lacs

Raichur - Karnataka

Tender For procurement of ms & gi bends for ahp-2 of rtps

corporations/Associations/Others

CTN :40135603

16 May, 2025 NA

Barsingsar - Rajasthan

Tender For supply of ms bends and expanders - mild steel bends 90 deg. , mild steel bends 45 deg , mild steel bends 90 deg , mild steel bends 45 deg. , m.s. pipe expander 50mm to 65mm , m.s. pipe expander 80mm to 100mm , m.s. pipe expander 100mm to 150mm , m.s. pipe expander 150mm to 200mm , m.s. pipe expander 200mm to 250mm

State Government

CTN :40132637

19 May, 2025 NA

Bhubaneswar - Odisha

Tender For supply of freeze-drying and its related accessories - freeze-drying (as per technical specification), 300 ml complete fast-freeze flask(as per technical specification), 600 ml complete fast-freeze flask(as per technical specification), 4-port manifold(as per technical specification), bend adaptor(as per technical specification), freeze straight adapter (glass)(as per technical specification), 900 ml complete fast-freeze flask(as per technical specification), complete fast-freeze flask(as per technical specification)

corporations/Associations/Others

CTN :40124766

09 May, 2025 24.00 Lacs

Chhota Udaipur - Gujarat

Tender For providing & supply of water supply materials item related to water supplydepartment at chhota udepur municipality, chhota udepur under the grantof 15th finance comission year-2021-22 tied grant - providingandsupplyinginstandardlengthisimarkrigidunplasticisedpvcpipessuitableforpotablewaterwithringfitjointincludingcostofrins,asperisspecificationno.4985/1988includingalllocalandcentraltaxes,transportation,freightcharges,octroi,inspectioncharges,loading,unloading,conveyancetothedepartmentalstoresandincludingcostofjointing meterial etc. complete., providingandsupplyinginstandardlengthisimarkhighdensitypolyethyleneh.d.p.e.pipessuitableforpotablewaterasperisspecificationno.4984/1995includingalllocalandcentraltaxes,transportation,freightcharges,octroi,inspectioncharges,loading,unloading, conveyance to the dept. stores etc. comp. 6.0 kg/cm2, manufacture,supply&deliveryofelectricresistancewelded(upto400mm)/submergedarcwelded(above400mm)m.s.pipehavingbeveledendsplateorcoilconformingtois-3589-2001oritslatestrevision/ammendmentforfollowingthicknessoutsidediameteratgwssbstoreorsiteanywhereingujaratstateincludingalltaxes,insurance,transportation,freightcharges,octroi,inspectioncharges,loading,unloadingconveyancetodepartmentalstores,stackingetc.allcomplete.i/ssolventfreeliquidepoxy lining (406 micron) + o/s 3 lpe coated m. s. pipe., providingandsupplyingd.i.k-7gradepipesforfollowingnominalborediameterwithinternalcementmortarliningincludingalltaxes,insurance,transportation,freightcharges,octroi,inspectioncharges,loading,unloading,conveyancetodepartmentalstores,stackingetc.complete.(is8329-2000)., providingatstoreorasiteofworkincl.freight,loading,unloading,stackinginsurance, & all taxes etc. complete, providingatstoreorasiteofworkincl.freight,loading,unloading,stackinginsurance, & all taxes etc. complete., m. s. specials plain & socket ends, manufacture,supply&deliveryofductileironflangesocketspigotbends,tees,reducersoranyotherspecialsasperbs-en-545/1995class-aseriesk12suitableforusewithd.i.pipesmanufacturedasperis:8329/1994deliveryofspecialsistobemadetogwssbstoreorsiteofworksanywhereingujaratincludingalltaxes,loading,unloading,carting,stacking,insurance, inspection charges, octroi etc. complete., providingatstoreorasiteofworkincl.freight,loading,unloading,stackinginsurance, & all taxes etc. complete, p. v. c. couplers 6 kg/cm2 (fabricated) 63mm dia., p. v. c. couplers 6 kg/cm2 (fabricated) 75mm dia., p. v. c. couplers 6 kg/cm2 (fabricated) 90mm dia., p. v. c. couplers 6 kg/cm2 (fabricated) 110mm dia., p. v. c. couplers 6 kg/cm2 (fabricated) 160mm dia., pvc tail piece with pvc flange (isi) heavy duty (moulded) 63mm, pvc tail piece with pvc flange (isi) heavy duty (moulded) 75mm, pvc tail piece with pvc flange (isi) heavy duty (moulded) 90mm, pvc tail piece with pvc flange (isi) heavy duty (moulded) 110mm, pvc tail piece with pvc flange (isi) heavy duty (moulded) 160mm, pvc tee (moulded) 63 x 63mm, pvc tee (moulded) 75 x 63mm, pvc tee (moulded) 75 x 75mm, pvc tee (moulded) 90 x 63mm, pvc tee (moulded) 90 x 75mm, pvc tee (moulded) 90 x 90mm, pvc tee (moulded) 110 x 90mm, pvc tee (moulded) 110 x 110mm, pvc tee (moulded) 160 x 110mm, pvc elbow (moulded) 63mm, pvc elbow (moulded) 75mm, pvc elbow (moulded) 90mm, pvc elbow (moulded) 110mm, pvc reducer (moulded) 160 x 110mm, pvc reducer (moulded) 160 x 90mm, pvc reducer (moulded) 140 x 110mm, pvc reducer (moulded) 140 x 90mm, pvc reducer (moulded) 110 x 90mm, pvc bend 90? (fabricated) 6.0 kg. 63mm, pvc bend 90? (fabricated) 6.0 kg. 75mm, pvc bend 90? (fabricated) 6.0 kg. 90mm, pvc bend 90? (fabricated) 6.0 kg. 110mm, pvc bend 90? (fabricated) 6.0 kg. 160mm, pvc r joint 10.0 kg (90 mm to 200 mm) as marcket rate, long collar without isi mark (class 15)

By Cities

By States

By Agencies

By Ownerships

By Sectors