Binding Work Tenders

Central Government/Public Sector

CTN :43648098

17 Feb, 2026 NA

Hazaribag - Jharkhand

Tender For corrigendum : supply of lamination module dual side fargo hdp - 5000 with complete assy , cleaning kit fargo hdp - 5000

Central Government And Public Sector

CTN :43887097

27 Feb, 2026 NA

Jammu - Jammu And Kashmir

Tender For repair of xerox photocopiers

Central Government/Public Sector

CTN :43921179

02 Mar, 2026 2.75 Crore

Cuddapah - Andhra Pradesh

Tender For tender for supply of puc civil allied works : : - earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth , 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m , as directed by engineer-in-charge. all kinds of soil , filling available excavated earth (excluding rock) in trenches , plinth , sides of foundations etc. in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming and watering , lead up to 50 m and lift upto 1.5 m , complete as per directions of engineer-in-charge. , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level 1-3-6 (1 cement - 3 coarse sand (zone-iii) -6 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finishing and reinforcement - all work up to plinth level 1-1.5-3 (1 cement - 1.5 coarse sand (zone-iii)- 3 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , steel reinforcement for r.c.c. work including straightening , cutting , bending , placing in position and binding all complete above plinth level and below plinth level.thermo-mechanically treated bars of grade fe-500d or 550d , complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and lifta) in foundations , footings , bases of columns , etc.complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and liftb) in superstructure columns , lintels , beams , plinth beams , roofs etc. , complete as per directions of engineer-in-charge. , dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete , complete as per directions of engineer-in-charge. , supplying and filling in plinth with sand under floors , including watering , ramming , consolidating and dressing complete , complete as per directions of engineer-in-charge. , demolishing r.c.c. work manually or by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer - in- charge. , neat cement punning , providing and grouting of pockets with cementitious grout non shrink of approved make by suitable means free flowing pump curing etc complete as per directions of engineer in charge the payment shall be made on the basis of actual weight of approved grout used as per directions of engineer in charge , structural steel work riveted , bolted or welded in built up sections , and framed work like purlins , frames , trusses etc. including cutting , hoisting , fixing in position and applying two coats of synthetic enamel paint over a coat of approved steel primer , complete as per directions of engineer-in-charge.. , providing , laying and jointing glazed stoneware pipes of 150mm dia pipe of class sp1with stiff mixture of cement mortar in the proportion of 1ratio1 1 cement 1 fine sand including testing of joints etc complete as per directions of engineer in charge , constructing masonry chamber 120x120x100 cm inside , in brick work in cement mortar 1-4 (1 cement - 4 coarse sand) for sluice valve , with c.i. surface box 100 mm top diameter , 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and rcc top slab 1-2-4 mix (1 cement - 2 coarse sand - 4 graded stone aggregate 20 mm nominal size) , ic necessary excavation , foundation concrete 1-5-10 (1 cement -5 fine sand - 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1-3 (1

State Government

CTN :43842380

23 Feb, 2026 3.09 Lacs

Raipur - Chhattisgarh

Tender For corrigendum : full service maintenance contract of photocopier machine (make: xerox model:-b7125)

Central Government/Public Sector

CTN :43948121

20 Feb, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For supply of procurement of specialised binding covers for air publications and manuals

State Government

CTN :43941030

27 Feb, 2026 NA

Sardar Krishinagar - Gujarat

Tender For tender forms for the sale of invalidated/unusable electrical, electronic, it hardware, ,computer equipment, and deadstock items.-desktop pc hp dx 7400 ,digital multifunction panasonic printer kxmb 2010 sx pritner ,desktop pc dell 755 ,4 ups 600 va w 115 min back up pc ups ,laptop notebook pc hp 2400 ,toshiba e-studio digital xerox machine ,rvm-21 mobile peagtal ,laptop computer ,third printer (samsung ml 1640) ,vt/ph x 3720/2gb/320gb/pc cpu ,v193 hplxo 16 blkle dmon itor pc monitor ,samsung ml 1666 color pc dollar printer ,laptop lenovo ideapad 300 15 isr intel core is-5200u (2.2 gh2 with win8-15l) ,black and white laser printer hp 2014n ,samsung smart phone-4 gb

Central Government/Public Sector

CTN :43921153

02 Mar, 2026 NA

Surguja - Chhattisgarh

Tender For supply of item for schedule no. 01 u pin 28 mm. pack of 100 clips , item for schedule no. 02 stamp pad 110x70 mm small , item for schedule no. 03 cotton tag 18 in. bunch of 100 pice good quality , item for schedule no. 04 conference pad 8. 5 in. x 5. 5 in 40 page . , item for schedule no. 05 conference pad big size 80 pages , item for schedule no. 06 favey stick big size 20 gram , item for schedule no. 07 high lighter pen , item for schedule no. 08 file tag size 8 in. pack in 100 nos. each bundle. , item for schedule no. 09 folder file superior quality big size 15 inch by 10 inch in folded condition with overall cloth lining and cotton tape of appropriate length for binding of folder made of pvc , item for schedule no. 10 dak file -pvc , item for schedule no. 11 box file 10 inch x14 point five width. it should be made of 32 ounce pvc board with superior quality lever clip. , item for schedule no. 12 paper pin nickel plated sharp point. , item for schedule no. 13 kobra file board plastic coated best quality, on the left side of inside of the cover with hard metallic wire to engage with the spring, for flipping papers smoothly. , item for schedule no. 14 pencil hb 10 nos per pkt , item for schedule no. 15 stepler small size 10 no. , item for schedule no. 16 stepler big size , item for schedule no. 17 colour sticker different type hilight colour size 0. 75 inch , item for schedule no. 18 colour sticker different type hilight colour size 1. 5 inch , item for schedule no. 19 permanent marker big size , item for schedule no. 20 white tape 30 mtr. lengh 2 in. , item for schedule no. 21 eraser , item for schedule no. 22 sharpeners , item for schedule no. 23 heavy duty stepler 23524 fl , item for schedule no. 24 stepler pin 10 no. packt. of 1000 staples , item for schedule no. 25 stepler pin 24 no. packt. of 1000 staples , item for schedule no. 26 board file 10in. x 14 by half in. width. it should be made of 32 ounce straw board and cloth pasted on the corner , item for schedule no. 27 punching machine big size. , item for schedule no. 28 executive file , item for schedule no. 29 broun tape 30 mtr. lengh 2 in. , item for schedule no. 30 rotring pen 2 no. original , item for schedule no. 31 small stick gum 8 gram , item for schedule no. 32 rulled register big size 96 pages made of good quality paper of 58 gsm of size 13 by 7 bound strip of binding cloth on the fold. , item for schedule no. 33 rulled register big size 192 pages made of good quality paper of 58 gsm of size 13 by 7 bound strip of binding cloth on the fold. , item for schedule no. 34 rulled register big size 288 pages made of good quality paper of 58 gsm of size 13 by 7 bound strip of binding cloth on the fold. , item for schedule no. 35 rulled register big size 384 pages made of good quality paper of 58 gsm of size 13 by 7 bound strip of binding cloth on the fold. , item for schedule no. 36 envelop cloth line 8 by 3 80 gsm , item for schedule no. 37 envelop cloth line 10 by 4 80 gsm. name and address of secl with logo , item for schedule no. 38 envelop cloth line trade type grade1 quality 18x12 80 gsm, printed name and address of secl with logo. , item for schedule no. 39 envelop cloth line trade type grade 1 quality 8x10 80 gsm. printed name and address of secl with logo , item for schedule no. 40 envelop with lamination 11x5 80 gsm, printed name and address of secl with logo , item for schedule no. 41 envelop with lamination 9x5 80 gsm, printed name and addrcss of secl with logo , item for schedule no. 42 tag file plastic coated thick size 10 by 14 the file should be made of 18 kgs century board and width binding cloth pasted at the lnner side of the fold //bid details2 / 38binding cloth pasted at the lnner side of the fold

Central Government / Public Sector

CTN :43947492

18 Feb, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12231ams26k,98050175, quantity- 68.775 mts. scrap condemned unserviceable ms-gi-ci rusted,corroded,dusted mixed scrap of c and w,loco,p. way,signal interlocking material consisting of all type of sheets,boxes,ms high gauge,pipes,footsteps,rings,strips,filters,trusses,patch cut parts,gutters,drum clocks,distribution boards,u rack,boring rod,ms panel body,ms battery charger covers,hand cuffs,driver seat,hand cart,push trolley,packing strips,ms body of block instrument,ms boiler coil cut pieces,42 u rack ms body,ms collapsible gate,ms termination box,ms bathroom ventilator,ms body of data logger,ms heater coil,screen guard,nuts,bolts,lavatory doors,ms carriage doors,pins,rivets,links,rods,angle cut pieces,structural frames,brackets,drums,cocks,basins,wire meshes,wire ropes,water tank cut up parts,casings,corrugated sheets,filter top and bottom caps,clamps,washer plates,stands,frames,sheet cuts,plate cuts,joists,channels,bases,plates,flats cut pieces,vestibule frames,window,door,shutters,head stocks cut up parts,broken t and p items,racks,compensating rings,bindings,washers,dust bins,chains,berth strips,gate frames,iron furniture,motor bodies,screw rods,levers,flats,rod cut pieces,trolley wheels,gi ducts,glow sign boards,ms electrical scrap,building rods,packing strips,ms body of rru,air cooler empty bodies,cbf filter,corrugated sheets,drums,blower motor frames,ucb packing frames,under frame cut up parts,berth frames,supports,cylinder blower covers,valves,end shield covers,traction motor yokes,shafts,piston rings,gears,brake shoe heads,brake gear items,straps,cotters,springs,equalizing stays,fan hub,end shield,pinions,ms covers,signal arms,lc gate pipes,ladders,angles,signal booms,rounds,signal buckets,pulleys,fabricated posts,signal lamp structures,liners,screws,spikes,air brake cylinders,brake hangers,bss hangers,battery boxes,battery containers,junction and location boxes,sleepers cut pieces,axle counter empty box,dc-dp ips empty rack ,sge block instrument empty box ,reset counter box,gps clock ,42 v rack,transformer bay,ms chain pulley blocks,beam scale parts,idly cooker with steam generator body,wheel barrow,fry pan single burner,ms floor stand,ms sliders,ms body wet grinder,fry pan,jara,ms ips rack rifle safety chain,ms air pump,foot spray,antenna,spiral binding machine,ms man drill,trbc covers,hand cart push trolley,expresser fan guard,ms first aid box,hacksaw frame,tool box,tie bars,ci brake blocks,composite brake blocks,ci pulleys,buckets,ms gear wheels,gym equipment,roti maker,bicycle parts,axle box,bfr cut up parts,grills,mesh,gate wheels,girders cut pieces,collars,trolleys,foot plates,signal point rods and any other ms-gi-ci material present in the lot with or without attachments of nf,ss,rubber,nylon and plastic. ms pan mortars,wire claws,wire baskets,crow bars,jim crow,dip lorry,weld filling body,sleeper hooks,rail dollies,rail cutting frames,augers,pick axe,tongue for rails,spades,beaters,ballast rake,powrahs,rail cum road mono trolley,case tin,h.s.lamps,rail dolly clips,shovels,trolley wheels and similar gang man items of sorts and sizes,with or without attachments.fiber,glass,windows,frp glass windows,window frames of sorts and sizes,broken or unbroken,with or without attachments of nf window shutters. [aluminium - 2 percent] note- 1. nf material,axles,wheel discs,and rails or material not mentioned in the description,if found during the delivery are to be returned to railways. 2. track and track fittings running through this area are excluded. 3. nf and stainless-steel attachments are approximately 0.1 percent of the lot quantity. 4. gas cutting permitted to facilitate loading. location- bin no- 231a, right side of road no- 2. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery, as per motor vehicle act 1988.

Central Government / Public Sector

CTN :43947496

18 Feb, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12203ms26k, 98011625, quantity- 32.310 mts scrap condemned unserviceable ms angles and channels, ismc, ismb cribs, bonds, binding strips, suspension angles, tie bars and flats, inspection ladders, relay racks, ct racks, fob, power racks of sorts and sizes, with or without attachments including pieces of ms rusted thin clips and rounds. location- bin no- 203, right side of road no- 2, note: gas cutting permitted to facilitate loading. note: private crane permitted for loading purpose. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery as per motor vehicle act 1988

Central Government / Public Sector

CTN :43947502

18 Feb, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12269ms26k, 98010037, quantity- 17.915 mts. scrap condemned unserviceable ms flats, ms bonds, ms billets, ms crow bars, tie bars, ms fencing, tammy bar, binding strips, suspension angles, tie bar door and window frames, tie bars fencing, rods, ms guide tube angles, angles and other fabricated structures of sorts and sizes, with or without attachments including pieces of ms rusted thin clips and rounds. location- bin no- 269, left side of road no- 2. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only. special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery

By Cities

By States

By Agencies

By Ownerships

By Sectors