Brick Tenders

Central Government/Public Sector

CTN :45733150

07 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - lot consisting of condemned foundry slag cake with rubble including slag dust, waste foundry sand and refractory bricks as available in the lot area except loose ferrous items. however ferrous items embedded with the slag cake, which cannot be removed ordinarily by hand shall be permitted for loading. delivery will be given from road approaching point in one direction only note : purchaser should lift all the material as available in the lot including rubble, ash content, mud etc., while delivery. material from the lot shall be lifted from one end removing both slag and rubble by scooping both simultaneously. no loose ferrous items such as wheel cuts, axle end cuts, runners, raisers, rail cuts, pipes, angles, channels, rods, sheets etc., will not be permitted for delivery. purchaser can inspect the materials thoroughly before e-auction. purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. delivery unit : in mt

State Government

CTN :45724216

01 Jul, 2026 NA

Rewari - Haryana

Tender For scarping of filter media from filter beds cleaning of unwanted material i.e. plastic bottle, plastic theli, bricks bats, kai, dewarting of water for filter beds etc. complete job work. /scarping of filter media from filter beds / scraping of filter media from filter bed and cleaning of vnotch hoddies at w/w sadat nagar

State Government

CTN :45724383

01 Jul, 2026 NA

Rewari - Haryana

Tender For scarping of filter media from filter beds cleaning of unwanted material i.e. plastic bottle, plastic theli, bricks bats, kai, dewarting of water for filter beds etc. complete job work. /scarping of filter media from filter beds / scraping of filter media from filter bed and cleaning of vnotch hoddies at w/w sadat nagar

Central Government/Public Sector

CTN :45716879

20 Jul, 2026 28.00 Lacs

Bangalore - Karnataka

Tender For tender for supply of electronic components - transformer smd , 16 pin 10/100 base-tx , soic-16 , -40 to +85 deg. c , emi shield , smd , 2 piece , size (16.50x16.50x3.60) mm lxwxh , cover for smd emi shield , size (16.50x16.5x3.6) mm , battery holder for cr2 battery , ultra cr2 lithium / manganese dioxide battery , 3v , 0.3 ohm at 1khz , lithium battery , 3 v , 20 mm dia , miscellaneous , pc card ejector , sfp cage connector & assembly , through hole , right angle , standard surface mount emi shield perforated , 2 piece , size(26.21 mm x 26.21 mm x 5.08 mm) lxwxh , emi shield cover 1.032inchx1.032inch , standard surface mount emi shield perforated , 2 piece , size (38.1 mm x 25.4 mm x 6 mm) lxwxh , emi shield cover 1.500 inch x1.000 inch , standard surface mount emi shield perforated , 1 piece , size (13.66 mm x 12.10 mm x 2.54 mm) lxwxh , dc-dc convertor , i/p 35-75vdc , o/p 12v , 25a , quarter- brick size , spring steel clip device , fixing clamp (tophx esip-7c) , lc display module , 16 charactors , 2 line 3.3v dc , temp -20 to + 70 degree c , 5 v , graphic lcd module , -10 to +60 deg. c

State Government

CTN :45430775

14 Jul, 2026 5.00 Lacs

Sheopur - Madhya Pradesh

Tender For corrigendum : supply of construction items and electric items - supply of constrution items and electric items, cement, sand, bricks, gitti, loha sariya 10mm, loha sariya 12mm, loha sariya 16mm, loha pipe 2x2, loha pipe 1.5x1.5, loha pipe 1.x1, loha engel 35x5, teen chadar 3.5x20, teen chadar 3.5x18, loha gate, kota stone, led bulb 09 watt, led bulb 14 watt, led tubelight complte 04 feet, wire 01 mm, cable wire 06mm, bulb holder branded, switch ancher, plug ancher 05pin, led plate 100 watt, sodium bulb 450 watt, chawk 450 watt, igneter 450 watt, condenser 450 watt, peela bulb 250 watt, igneter 250 watt, condenser 250 watt, chowk 250 watt, copper wire 03 phase, copper wire ceiling fan hetu, wall mount fan, distril water battery hetu

State Government

CTN :45720717

13 Jul, 2026 NA

Ratlam - Madhya Pradesh

Tender For supply of sanitation , building material and other for circle jail ratlam - sarso ka tel, nariyal ka tel, tooth brush, finol, cruid oil (jala hua grease), plastic mug, plastic balti , plastic comb, greese, bating soap, shampoo pouch, cloth washing soap, washing powder , blade , ustare, kechi, dustbin 32 liter, dustbin 5 liter, doormate 2 x2 , zero machine, tokri bas ki, zibi plastic, colgate powder, chuna, geru , pili mitti, bas jhadu badi, bas jhadu chhoti , khajur jhadu, matke with dhakkan, kuchi , toilate brush, toilate cleaner, paint all colour with white, plastic paint, distemper, 6 inch brush , 4 inch brush, putti, stainer, tarpin, vesline 50 gm packet , led 3 watt, led 5 watt, led 9 watt, led 12 watt, led 14 watt, led 60 watt, led 75 watt, tube well moter 5 hp, tube well motor 10, tubewell pipe 20 feet, motor wiring 3 hp , motor wiring 5 hp, motor wiring 10 hp, tube well cable 6 mm , aata chakki pat ambristone , wire bundle 1.5 mm , 3/20 copper wire , torch cell , tape roll , brick 4 x 8, balu ret 3.5 meter wali, cement 50 kg bag, moti ret trolly, kali gitti , kali churi, kota stone , sariya 6 mm, sariya 9 mm, sariya 16 mm, tiles chhoti , 2 x2 100 tiles, white cement, paver block, tin prifile 4 x 12, tin profile 4 x 16 , tin profile 4 x 18, ms pipe 2 inch 20 feet, ms pipe 2.5 inch 20 feet, pvc pipe .5 inch, pvc pipe 1 inch , plastic tanki 500 liter, plastic tanki 1000 liter , water tape .5 , garden pipe .5 inch, lohe ke darwaje 3.5 x 6.5 , lohe ke darwaje 2.5 x 3, lohe ki khirki 3 x 4, letrin sheet paydan wali, cutter machine ke patte, lohe ke angle 8 inch, welding rod, paper a4 size, shaskiya cash book, printer toner refilling, alpin packet, stapler, tape roll , leice, calculator

CTN :45738664

14 Jul, 2026 NA

Kupwara - Jammu And Kashmir

Tender For supply of 1.5 sqmm mm copper wire as per relevant is and as approved , 16 amp socket as per isi marked , 16 amp sp mcb conforming to is spec , 16 amp switch as per isi marked , 2.5 sqmm copper wire as per relevant is and as approved , 20 amp switch as per isi marked , 3 way modular as per isi marked , 32 amp double pole mcb as approved , 4 module as per isi marked , 4 sqmm twin core copper wire as per relevant is and approved make , 4 way module as per isi marked , 6 amp single pole mcb as approved , 6 amp socket as per isi marked , 6 amp switch as per isi marked , 6 way modular as per isi marked , 6 way module inner as per approved sample , 8 mm wire as per sample approved , 8 way mcb box as per sample approved , 8 way modular as per isi marked , 8 way module inner as per approved sample , aggregate 20mm as per is spec , balcha spade as per isi marked , base plate 6 ft x 6 ft conforming to is spec , black screw as per sample approved , blender , brick red conforming to relevant isi marked and as per sample , ceiling light 15 w as per isi marked and as per sample , cgi sheet 12 ft long x3.5mm thick as per sample approved , cgi sheet 15 ft long x 3.5mm thick conforming to is spec and as per sample approved , conduct pipe 6 ft long as per is spec , cutter blade 14 inch , dhaga or thread , exhaust fan 300mm sweep black and as per isi marked , folted pvc as per relevant isi marked and as per sample approved , foundation bolt 12mmx40mm as per sample approved , gazz 10 ft , hexa blade , hollow blocks of size 400x400m , hook nail as per approved make , inner frame tuffen as per sample approved , interlocking tiles as per sample approved , marble granite black as per sample approved , nail teen as per approved make , nails 2 inch long as per isi marks , natural sand as per is 383 and as approved , nut bolt as per sample approved , paint brush 4 inch , ply wood 12 mm thick 8 ft long , poly wire 1mm single core copper as per isi marked , poly wire 2.5mm sqmm two core copper wire , poly wire 4mm sqmm two core cas per isi marked , pvc box as per sample approved , pvc ceiling as per relevant isi marked and as per sample approved , red oxide , saphire pvc as per relevant isi marked and as per sample approved , scatling 10 ft lonmg 6.5x6.5 , scatling 3.5 ft x 3.5 ft of 10 ft long , sd screw 1.5 ft long , sd screw 4inch , slide tuffened door of size 7ft x 8ft as sample approved , sliding window as approved , small frame as per sample approved , stainless steel pipe 3 ft x1.5 ft as per is spec , stainless steel pipe 4 ft x4ft , stainless steel pipe 2.5 ft x1.5 ft as per sample approved , stainless steel pipe 4 ft x 2ft , steel acp sheet as per relevant isi marked , strip roll as per sample approved , tape roll , tile 2 ft x 2ft as per sample approved , turpentine oil , wall fan 450mm sweep as per sample approved , welding rod , white cement , wooden blade 4 inch as per sample approved , wooden door as per sample approved , wooden door frame as per isi marked and as per sampe approved

CTN :45282070

02 Jul, 2026 NA

Hamirpur(Hp) - Himachal Pradesh

Tender For bid to ras corrigendum : supply of fighting pd at battal , fighting pd at hamirpur , mor pit at battal , mor pit at pallanwala , rl firing pit at hamirpur , rl firing pit at pallanwala , cement at battal , river sand at battal , aggregate 20mm at battal , aggregate 40 mm at battal , hard core stone agg 40 to 63 mm at battal , stone boulders 63 to 100 mm size at battal , pcc bricks at battal , cement at hamirpur , river sand at hamirpur , aggregate 20mm at hamirpur , aggregate 40 mm at hamirpur , hard core stone agg 40 to 63mm at hamirpur , stone boulders 63 to 100 mm size at hamirpur , pcc bricks at hamirpur , cement at pallanwala , river sand at pallanwala , aggregate 20mm at pallanwala , aggregate 40 mm at pallanwala , stone boulders 63 to 100 mm size at pallanwala , pcc bricks at pallanwala

CTN :45645163

03 Jul, 2026 15.00 Lacs

Bathinda - Punjab

Tender For corrigendum : re-lining and lining of watercourse by brick masonary of outlet rd 37500-tl of mehma mara of village mehma sawai, kothe sandhu distt. bathinda