Building Material Tenders

Central Government/Public Sector

CTN :45384656

20 Jun, 2026 31.96 Lacs

Pune - Maharashtra

Tender For corrigendum : provision of additional transformer alongwith associated items at af stn pune under ge (af)lohegaon - s & f steel tubular swaged poles complete with cast iron plate, finial taper plug, bolt, nuts & screws as specified type 410 sp-55 (11 mtr long) including one coat of red oxide primer and two coats of aluminium paint and making 30 cm wide strips (total -05 nos) with yellow and black paint alternately on external surface above column/pcc benching including numbering with black paint and painting with bitumenous paint internally and externally for portion embedded complete all as specified and directed., s & f air break gang operated switch with 12 nos insulators outdoor type, triple pole, mechanically operated, suitable for vertical installation, single break, provided with locking arrangement consisting of ms chanel ht post type insulator copper alloy, high pressure assembly drop out fuses operating rod of 20 mm dia gi pipe (medium grade) for operating from 1.2 m above gl complete including drop out fuses conforming to is-9921 part-i to v (1982 to 1985) of 1972 rated voltage 11 kv and for current rating 200 amp all as specified, material and labour for lightning arresters nominal discharge current peak 65 ka rating, suitable for operation on ht 11000 volts system, comprising of zinc oxide disks, electrodes, fibre re-in forced composite structure, non tracking weather resistant shedded heat shrinked polymeric housing for withstanding from the effects of pollution, rain, heat and with moisture seal , stainless steel bolts and nuts, stainless steel end fitting cups and fixing arrangements complete all as specified and as directed., m&l for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections i.e m.s. channel or angle sections etc. including new nuts, bolts, washers as reqd dia/length in size, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive one primer coat of red oxide, one under coat and one finishing coat of aluminium paint (1st quality ) as reqd complete as specified., m & l for cement concrete 1:3:6 type c1 (using 20 mm graded aggregate) as lean concrete for coping of pole, stay foundation etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified, material and labour for cement concrete 1:2:4, type b-2 (using 40 mm graded stone aggregate) as lean concrete for road finishing even and fair without using extra cement complete all as specified and as directed., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable outdoor type, incl carrying out 5kv megger test after jointing complete all as specified and directed by engr-in-charge., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable indoor type, incl carrying out 5kv megger test after jointing ,complete all as specified and directed by engr-in-charge., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 400 sq mm including aluminium lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply, laying & testing industral pvc frls insulated single core flexible cable, electric power cables (heavy duty) with stranded copper conductor, 1100 volts grade, of size single core 185 sq mm, including copper cable lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply and install, testing and commisioning of outdoor transformer as per is : 1180 part-i, level-ii step down, c

Central Government/Public Sector

CTN :45366634

22 Jun, 2026 25.00 Lacs

Ferozepur - Punjab

Tender For corrigendum : repair to sunken flooring, plumbing with connected items to otm accn in aor of age b/r-ii of ge (east) ferozepur cantt - demolition of un-reinforced cement concrete in any position, complete all as specified and directed., m&l for cement concrete (1:5:10) type e-2 using 40 mm graded stone aggregate as in filling in sunkan slab or as in sub base, mass concrete, complete all as specified and directed., m&l for 15 mm thick rendering over concrete surface of sunken floor in cm 1:3 on wall as well as sunken floor finished even and smooth without using extra cement using wpc complete all as specified and directed.(wpc measured and paid separetely), m&l for water proofing treatment to rcc sunken floor including wall comprising with the following course of treatment/ specifications form bottom to top:-(a) applying evenly a tack coat of industrial bitumen 85/25 @ 1.6 kg per sqm over a coat of bitumen primer @ 0.40 ltr per sqm including preparation of roof surfaces complete all as specified and as directed.(b) app based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.note: (i) laying of app based membranes shall be done by torch on method or as per manufacturers instructions.(ii) a minimum overlap shall be not to be less than 150mm of polymeric membranes and sealed all overlaps and joints as manufacturers instructions.(iii) all ci/pvc traps in sunken slabs to be enclosed with pcc 1:1.5:3(min 15 cm) all round., supply only integral water proofing compound, complete all as specified and directed., taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair and even including wpc,preparation of new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of chalk white primer on walls complete all as specified and directed. (wpc measured and paid separately), m&l for preparing old surfaces plastered or unplastered of walls, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coats of cement based paint complete all as specified and directed., m&l for rendering 15 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished fair and smooth without using extra cement complete all as specified including preparation of new surfaces of wall and applying two coats of oil bound distemper on walls including corneces, pillars etc complete all as specified & directed., m&l for preparation of old decorated surface of wall and applying one coat of oil emulsion distemper, complete all as specified and directed., m&l for rendering 5 mm thick on ceiling surfaces in cement mortar (1:3) finished even & smooth without using extra cement including preparation of new plastered or unplastered surfaces and applying two coats of white wash on ceilings, complete all as specified and directed., m&l for preparing old surfaces plastered or unplastered of ceiling, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime wash (white washing), complete all as specified and directed., resecuring or eashing & adjusting, without taking down of shutters of any description of exc. 1 sqm but n.exc. 2 sqm each complete all as specified & directed., taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 square metre each including cut

Central Government/Public Sector

CTN :45512816

23 Jun, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 45 )items as given below ,[1] scrapping,moorum over wbm surface 100.000 m2,[2] earth wrk,box cutg,175m 1400.000 m3,[3] dressing and chilchalling road flanks 100.000 m2,[4] disposal,debris 1000.000 m3,[5] lay bitumin macadam,hotmix plnt,15-20tph 1250.000 m3,[6] layg thk20mm premix carpet,hotmix palnt 84000.000 m2,[7] layg 6mm nominal thick premix carpet 84000.000 m2,[8] layg tack coat,wbm surface,4kg/10m2,m/c 20100.000 m2,[9] providing & laying tack coat over wbm 5000.000 m2,[10] layg tack coat,wbm surface,3kg/10m2,m/c 84000.000 m2,[11] providing & laying tack coat bituminous 168000.000 m2,[12] supply,sand including spreading 250.000 m3,[13] supply of moorum including stacking 20.000 m3,[14] labour f/spreading moorum to proper lvl 20.000 m3,[15] supply approve quality stone metal&stack 600.000 m3,[16] applg,thermoplastic paint 3600.000 m2,[17] instln 3m microprismatic lens cats eye 3000.000 ea,[18] scrapping, cleaning etc. 50000.000 m2,[19] supply approved quality slag metal&stack 180.000 m3,[20] extra over premix carpet for plastic use 21000.000 m2,[21] extra over seal coat for plastic use 21000.000 m2,[22] supply and installation of bumps 70.000 m,[23] dismantling of brick work 5.000 m3,[24] disman of pcc 5.000 m3,[25] disman,rcc 5.000 m3,[26] prvdg&placing,steel reinf 2.000 to,[27] rcc,w/down stone chips,1:1.5:3 10.000 m3,[28] flyash br wrk,230mm,m7.5,super sturcture 5.000 m3,[29] plaster,cement mortar,thk12mm 50.000 m2,[30] nmnl mix,m-15 cc w/grd stone,f/basement 5.000 m3,[31] ctrld cc grd m30 mix,gnd flr 20.000 m3,[32] supply,hume pipe,dia300mm 5.000 m,[33] prvdg,layg,jtng,r.c.hume pipe,450nb 5.000 m,[34] supply,hume pipe,dia500mm 5.000 m,[35] microsurfacing type-ii 7000.000 m2,[36] microsurfacing type-iii 3500.000 m2,[37] providing and laying 25mm thick mastic 10500.000 m2,[38] providing and laying dense graded bm 1260.000 m3,[39] providing and laying bituminous concrete 940.000 m3,[40] providg bituminous concrete with plastic 300.000 m3,[41] wet mix macadam base course 630.000 m3,[42] labour for spreading stone 630.000 m3,[43] labour for spreading slag metal 189.000 m3,[44] sweeping,road mechanically 10500.000 m2,[45] prvdg,shuttering 200.000 m2

State Government

CTN :45519504

22 Jun, 2026 NA

Jabalpur - Madhya Pradesh

Tender For procurement of waterproofing material for treatment at shakti bhawan mppmcl jabalpur - providing of acrylic polymer waterproofing material of pidilite/ cico/ mymix/ arda/ approved equivalent make (20 kg each bucket), providing of black liquid waterproofing compound of pidilite/ cico/ mymix/arda/ approved equivalent make (20 kg each bucket), providing of roof coat wh 700 white liquid waterproofing compound of pidilite/ cico/ mymix/ arda/ approved equivalent make (20 kg each bucket), providing of fiber net 45 gsm (each roll of 1m*50m), providing of pu sealant of pidilite/ cico/ mymix/ arda/ approved equivalent make (600ml each pack), providing of silicone based water repellent for exterior coating of pidilite/ cico/ mymix/ approved equivalent make (10 lt each bucket), providing of silicone sealant of pidilite/ sika/ loctite/ approved equivalent make (280 ml each pack)

Private Sector

CTN :45536652

30 Jun, 2026 15.86 Lacs

Chennai - Tamil Nadu

Tender For auction sale of land - item.no.1 - prakasam district - markapur rd - addanki sro -addanki mandal - rongapadu village panchayath area - h/o.south addanki kongapadu village, sy.no.1538/1 - subdivided sy.no. 1538/1b - property bounded byeast : site of koili anjaiahsouth : 20 feet width bazarwest : 10 feet width bazaarnorth : site of cheedara venkata raowithin the above boundaries an extent of 37.33 sq yardsitem no.2 - h/o.south addanki - kongapadu village sy.no.1538/1 - subdivided sy.no.1538/ib - property bounded by:east : 10 feet width bazarsouth : 20 feet width bazarwest : site of addanki siva parvathinorth : site of cheedara venkata raowithin the above boundaries an extent of 199.11 sq yards.both items making a total of 236.44 sq yards

CTN :45225360

15 Jun, 2026 8.94 Lacs

Sonitpur - Assam

Tender For bid to ras supply of sachet , lactic acid bacillus 1g sachet sprolac sach , inj neurobion fort , tab neurobion fort , steri strips , foleys cathetr size 16 fr three way , foleys cathetr size 18 fr three way , sodium cloride 3 percent 30ml inj , corn cap , letex brown ortho surgical gloves size 7 , letex brown ortho surgical gloves size 7.5 , suction catheter size 16 , suction catheter size 18 , silk braided size 1 comma 70 to 75cm 3 by 8 circle needle 45mm silk , black silk brainded 3by0 70 to 76cm cutting 1by2 circule needle 20 to 25mm , black silk brai size 2by0 comma 70 76cm cutti 1 2 circule needle 20 to 25mm , polypro blue monofil 70 to 75cm size 3 to 0 3by8 circle reve cutting , polypro blue monofi 70 to 75cm size 1 to 0 3 by 8 circle rever cutti , polypro blue monofi 70 to 75cm 2 to 0 comma 3 by 8 circle reverse cutt 12mm , polypro blue monofi 70 to 75cm 4 to 0 3 by 8 circle reve cutt 12mm , polypro mesh for hernia medium by polypro mesh size 30cm polygycolic acid , polypro blue monofi 70 to 75cm size 2 to 0 comma 3 by 8 circle round body 12mm , polygli size 1 to 0 comma 70 to 75cm comma 3 by 8 circle cutt 20 to 25mm , polygli size 3 to 0 70 to 75cm 3 by 8 circle circle 20 to 25mm , polygli size 4 to 0 comma 70 to 75cm comma 3 by 8 reverse cutting 15 to 20 mm , polypro blue monofi 70 75cm size 3 to 0 3 by 8 circle cut 25mm double needle , polypro blue monofi 70 to 75cm rb 12 to 18 mm double needle , polyamide monofi size 1 circle reverse cutting 40 to 45mm , polyamide monofi size 2 reverse cutting 40 to 45mm , polyamide monofi size 3 to 0 70 to 80cm 3 by 8 circle rev cutting 25 to 30mm , polyamide monofilament size 4 circle cutting 15 to 20mm , monofi polyglyco synthetic suture size 3 taper cutting 20 to 30mm , synthetic polygala 910 by polyglycolic acid coated 2 to circle rb 30 to 40mm , synthetic abso polygal 910 size 3 to 70 to 90cm 1 by 2 circle rb 20 to 25mm , acticoat burns dressing silver coated 10cm multiply 10cm , acticoat burns dressing silver coated 40cm multiply 10cm , dressing wound care 10 multiply 10cm box of 5 , dressing wound care 4 multiply 4cm box of 5 , tab trypsin and chymotrypsin 100000 au , tab cetrizine 5mg and phenylephine 10mg and pcm 325mg n cold , ketoconazole shampoo 2 percent bott of 100ml , paradichlorobenzene and benzocaine and chlorbutol ear drop clear wax , luliconazole 1 percent w by v 30gm oint , syp dextromethorphan 5mg and chlorpheniramine 2mg 60ml bott tixylix , bacillus clausii spores suspension 2 billion by 5ml , benzocaine 6 percent and salisylic acid 3 percent mouth ulser gel tube of 30 gm , tab olmisartan 20mg , disposable silicon cutery plate , skin grafting blade , under water sealed bag , giggles saw wire with handle , thoracic drainage catheter size 30f , disposable surgical patient drape , disposable surgical drape sheet with hole , collagen granuels 10ml powder pack , micro surgery latex powder free gloves size 7 point 5 pack of 50 pair , betadine surgical scrub 7 point 5 percent solution bott of 500ml , alfuzosin 10mg tab , nifedipine 0 point 3 percent plus lignocaine 1 point 5 percent tube of 30gm , diltiazem hydrochloride gel 2 percent tube of 30gm , diclofenac patch 100gm , eltrombopag 50g mtab , tenofovir 300mg and lamivudine 300mg and dolutagravir 50mg tab , pentoxifylline prolong release 400mg tab , urine collection bag with measured chamber 1000ml , tofacitinib 5mg tab , quetiapine 25mg tab , oseltamavir 75mg tab , bisoprolol fumarate 5mg tab , eplerenone 25mg tab , propylthiouradcil 50mg tab , rivaroxaban 20mg tab , rivaroxaban 15mg tab , lidocaine 2 percent inj , doxyfylline 400mg tab , imatinib mesylate //bid details 2 / 93 400mg tab , swab stick , phytomenadione vit k 10mg per 0 point 5ml inj , inj doxycyline 100mg , inj azithromycin 500mg , inj methylprednisolone acetate 80mg , purified vero cell rabies vaccine 2 point 5 iu 0 point 5ml , human diploid cell rabies vaccine 100 iu per 2 point 5ml , condom pack of 3 , melatonin 3mg tab

CTN :45252242

15 Jun, 2026 10.21 Lacs

Jabalpur - Madhya Pradesh

Tender For corrigendum : supply of braided comma size 3to0comma 70to76 cm comma rb 1oblique2 circle needle 20to25 mm , nitrile non sterile gloves large l , sodium chloride solution isotonic in nontoxic disposable plastic bottle of 500ml ffs , desensitising tooth paste tube of 50 gm , lignocaine hcl jelly 2percent tube of 30 gm with sterile tube and short nozzle suitable for intra urethral use comma should be packed within a sterile blister pack , cavity liner calcium hydroxide based self cure radiopaque two paste system tube of not less than 10 gms , antiseptic mouth wash containing sodium fluoride and triclosan bott of 100to150ml , anticaries mouth rinse containing sodium fluoride bott of 100 ml , post extraction alveolar dressing material jar 10 gms , periodontal pack non eugenol two paste system of base and catalyst comma 90 gm each , abrasive mounted diamond fg round 1point8mm , abrasive mounted diamond fg inverted cone 1point8mm , abrasive mounted diamond fg cylindrical 1point2mm , hand piece lubricant spray bott of 500 ml to 600ml , articulating paper , patient bib comma plastic , calcium hydroxide with iodoform root canal dressing and filling paste in syringe of 2 to 4 gms , wax modelling base plate wax , inter dental brush pack of 05 , dental floss pack of 05 , suction cleaning solution bott of 1 ltr , cold mould seal , self cure acrylic powder pink shade bottle of 110 gm with rapid repair liquid 110 ml , self cure acrylic powder clear shade comma bottle of 110 gm with self cure acrylic liquid 110 ml , paste impression pkt of two tubes containing zno base125to165 gm and catalyst , crown and bridge plaster die stone super hard for pkt of 01 kg , flowable lighttocure composite kit complete of four syringes of 2 to 4 gm each with etchant and bonding , medicament root canal formocresol to bott of 10 to 15 ml , sol sodtohypochlorite 2percent for endodontic irrigation bott of 500ml , matrix retainer ss ivory pattern band for comma pkt of 12 for molars and premolars , outfit matrix ss siqveland bands narrow for , k files stainless steel size no 8 length 25 mm set of 6 , k files stainless steel size nopoint10 length 25 mm set of 6 , k files stainless steel length 25 mm size no 15to40 set of 6 , barbed broach set of 10to12 , rotary niti endodontic files with controlled memory size of 21 mm and 25 mm , dental mouth mirror top autoclavable scratch resistant rhodium coated size 4 , chlorhexidine gluconate 0point2percent wobliquev mouth wash , plastic wedges , diamond bur 1point0 , diamond bur 0point4 , gauze absorbent comma folded comma 2point5 cm x 100 metres , pad abdominal swab comma 40 x 25 cm with tape comma 30 cm , pad comma cotton wool comma dental comma box of 100 , rolls comma absorbent cotton dental comma assorted sizes in box of 500 , surgeons caps disposable , silk braided comma size 4to0comma 70to76 cm comma rb 1oblique2 circle needle 20to25 mm , silk braided comma size 4to0comma 70to76 cm comma rb 3oblique8 circle needle 12to16 mm , n 95 mask without expirator valve , nitrile non sterile gloves small s , nitrile non sterile gloves medium m , protective goggles reusable , hydrogen peroxide solution with stabilizer ip 20 volume 500 ml bott , diethyl ether solvent bott of 500 ml , lignocaine 100 mg and ethanol 28 percent vobliquev spray container of 500 ml , triamcinolone acetonide 0point1percent for oral usecomma tube of 5 gm , dextrose monohydrate for oral use , syringe disposable 50 ml , antiseptic oral pain relieving topical gel containing antiseptic and topical anaesthetic in gm or ml , bur tungsten carbide for straight hand piece 7mm , denture cleaner tablets pack of 30to40 //bid details 2 / 99 tablets , rubber base impression material kit with accessories , broach comma nerve canal barbed assorted size pkt of 12 , lining cavity composite cal hyd based photocure to prefilled syringe of 2to5 gm with applicator tips , h file stainless steel size no 15to40 comma length 21 mm set of 06 , regular oblique medium body elastomeric m

CTN :45384476

17 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For corrigendum : purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45511690

18 Jun, 2026 3.47 Lacs

Multi City - Karnataka

Tender For supply of teaching and learning material, bala facility and nutrition kit to the schools of ghps bhatri, ghps havambhavi, ghps guggarahatti west 3 schools, ghps mundrigi, gmhps kambli bazar, ghps 13th ward bellari, ghps andral east 4 schools. total 7 ecce schools in ballari taluk and district.

CTN :45531373

19 Jun, 2026 83.91 Lacs

Kolkata - West Bengal

Tender For maintenance of electrical installation & fans i/c repair maintenance of pump sets, compound light with day to day replacement of electrical spare material with electrical wiring, plug point etc. and operation of lifts, fire fighting system & diesel generator set in 80 nos. type-iii & 22 nos. type-iv qtrs. in (g plus 10) storied building for income tax department at muchi bazar, ultadanga, kolkata dg. 2026-27. (sh: providing services for maintenance of iei & running operation of pump sets, diesel generator sets, lifts, wet riser system etc.)

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Private Sector