Case Tenders

Central Government/Public Sector

CTN :45737277

20 Jul, 2026 NA

Ambala - Haryana

Tender For supply of transmission measuring set (tms kit) complete with tone generator and db meter having 470-, 600-and 1120-ohm output impedance range, less than 2% distortion, more than 60 db degree of balance, transmission level of +10 dbm to -50 dbm in 10 db steps and +1 to -10 db continuous variable, accuracy +- 0.2 db, lcd digital panel meter, 3 & half digits display, rechargeable ni-mh battery. complete set with all connection lead & accessories. (connection cables, test leads, user manual, carrying case). [warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45731979

01 Jul, 2026 NA

Ahmedabad - Gujarat

Tender For supply of set of three woolen felt for hitachi gear case as per is- 1719- 1988- extra hard. size qty/set i) 770mm x 8mm x 22mm - 24 nos/ set ii)520mm x 9mm x 22mm - 12 nos/ set iii)550mm x 12mm x 23mm-12 nos/ set [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45728540

22 Jul, 2026 NA

Rewa - Madhya Pradesh

Tender For supply of digital gloss meter 60 degree with calibration standard tile, calibration certificate, instruction manual, carrying case & usb cable. make:- rhopoint or similar [ warranty period: 30 months afterthe date of delivery ] ]

Central Government/Public Sector

CTN :45731612

06 Jul, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For digital pressure gauge as per the following specification: - 1). range: 0 to 16 bar, 2). pipe connection: 1/4 inch male bsp, 3). resolution: 0.01 bar, 4). accuracy: +/- 0.5% full scale, 5). pressure units should be in bar, psi and kg/cm2, 6). instrument dimensions: 80 mm -105mm, 7). instrument casing: stainless steel/abs, wetted parts: stainless steel. 8) battery powered make : ascorp/equinox/wika/excel/insize/winters. note: - user manual, carrying case & calibration certificate from nabl accredited or govt labs should be produced along with supply. [ warranty period: 12 months after the date of delivery ] ]

State Government

CTN :45720726

15 Jul, 2026 3.50 Lacs

Satna - Madhya Pradesh

Tender For materials for the sewing industry (section 02) - paper tape , welding rod , nails (nos. 14, 17, 20) , yellow clay, chalk clay , plastic cane (for chair weaving) , chandras (shellac resin) , nc thinner , sandpaper (4-inch) , turpentine oil , paint (all colors) , water-based paint (all colors) , oil-based paint (all colors) , brush , brush , saw , triangular file , plywood (12 mm) , plywood (18 mm) , plywood (8 mm) , plywood (6 mm) , sunmica (1 mm) , sunmica (0.8 mm) , iron angle, iron strip , metal cutting blade , metal cutting blades , nuts, bolts, and washers (all sizes) , foam (3-inch, 32-density) , foam (2-inch, 32-density) , foam (1-inch, 32-density) , sofa fabric/rexine , grinding wheel , putty , brush cutter (circular blade) , gi wire , broom sticks , adhesive (sr 505) , welding goggles (black/clear) , measuring tape , drill bit , wooden block/batten , teak wood , acacia wood , sheesham wood , firewood , sealer , wood touch-up/finish , sandpaper , electric planer , c-clamp , bench vise , hand drill machine , compressor gun , compressor hose , planer machine molding die , sewing machine oil , nylon shirt buttons , hand sewing needles , sewing machine needles (10 pieces per packet) , sewing machine treadle/pedal , tailor's chalk , thread reels , amela machine bobbin case , sewing machine needle plate , scissors (size 08, 10) , sharpening stone , sewing machine , overlock machine , embroidery threads , embroidery frame , macramé cord (cotton, polyester, nylon, jute) , poly master , tree rope , stapler pins , white paper (80 gsm) , laser paper (green, 80 gsm) , white paper (68 gsm) , white paper (68 gsm) , ruled paper (68 gsm; ream of 1000 sheets) , ruled paper (68 gsm) , white paper (57 gsm) , brown paper (80 gsm) , card sheet (165 gsm) , cardboard sheet (no. 32) , rin/surf excel laundry soap , coating , fevicol , winding thread , winding cloth , fount solution , brown tape , screen printing ink , decoter , german sponge , reducer , winding paper , synthesizer , yellow envelope paper , stapler gun , winding paper , colored paper (70 gsm) , annual contract section , picking wall fiber , pickers , ratchet catch (leaf set) , pressing cam lever lr-101 , wooden steel (no. 29) , wheel gear 14t (no. 62) , bevel gear , worm wheel stud , ratchet catch lever , buffer soldering bracket , buffer strap (leather) , stick cap , bearing , ratchet wheel , warp weaver , worm , parachute rope , fine belt , picking stick , tariff wheel , handloom pickers , fast dyes (for fabric) , powerloom steel reed , yarn 2/40s on cone (coloured/white) , yarn 6s on coloured cone , coloured wool , yarn 2/60s on cone (coloured/white) , jute fabric , yarn 6s on cone , handloom reed (no. 12) , warping machine brake belt (leather) , dari beater/comb (wooden) , emery strip , warp frame hook set , pick/bobbin filling rod (handloom) , cast iron welding rod , temple rod/cover , weft filling needle/hook

Central Government/Public Sector

CTN :45632187

03 Jul, 2026 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : supply of viscometer u-tube reverse flow bs/ip/rf viscosity 2-10.2,viscometer u-tube reverse flow bs/ip/rf viscosity 2-10.2,viscometer u-tube reverse flow bs/ip/rf viscosity 2-10.2,viscometer u-tube reverse flow bs/ip/rf viscosity 2-10.2,viscometer u-tube reverse flow bs/ip/rf viscosity 2-10.2,viscometer u-tube reverse flow bs/ip/rf viscosity 2-10.2,viscometer u-tube reverse flow bs/ip/rf viscosity 6-30.3,viscometer u-tube reverse flow bs/ip/rf viscosity 6-30.3,viscometer u-tube reverse flow bs/ip/rf viscosity 6-30.3,viscometer u-tube reverse flow bs/ip/rf viscosity 6-30.3,viscometer u-tube reverse flow bs/ip/rf viscosity 6-30.3,viscometer u-tube reverse flow bs/ip/rf viscosity 6-30.3,20 mm aluminium crimp caps (head space) ptfe beige /white silicon septa (case/100) .,20 mm aluminium crimp caps (head space) ptfe beige /white silicon septa (case/100) .,20 mm aluminium crimp caps (head space) ptfe beige /white silicon septa (case/100) .,20 mm aluminium crimp caps (head space) ptfe beige /white silicon septa (case/100) .,

corporations/Associations/Others

CTN :45702242

07 Jul, 2026 17.03 Lacs

Kota - Rajasthan

Tender For regular operation and maintenance of street lights (with material) at all industrial areas under riico ranpur kota(for 2 years) - regular operation and maintenance of high mast light in ranpur , kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register shall be maintained at riico/association office and complaint lodged must be attended by contractor within 24 hours. the person deputed by contractor shall attend the riico/association office daily and comply the instructions and attend complaints regularly. iii contractor will have to employ trained and qualified electricians for the work. iv corporation shall not be responsible for any kind of accident during execution of work. v contractor will be responsible for safety and security of fixtures and all concerned materials. vi contractor will be responsible for arrangement of all t&p required for the work vii cost of all labour and material like lamp / balllast wire etc. will be born by contractor. all material required for the work shall not be below the category-ii of concerned bsr item. contractor has to repair and maintenance of fixture with material in all cases like short circuit, phase to phase of jvvnl line etc. viii no extra payment will be made for fixing/removal of extra/existing fixture in the industrial area. ix contractor will be responsible for timely collection and deposition of electric bills of areas in each month. in case of delay in payment and jvvnl impose surcharge for delay payment the same will be recovered from the running bill fo the contractor. payment of electricity bill will be made by riico. x contractor will be responsible for rebate of timer provided by jvvnl. hence contractor will maintain the on/off system by timer properly. in case no rebate is provided by jvvnl due to failure of timer then rebate will be deducted from contractor payment. xi contractor will be responsible for any theft of electricity through poles and he will make necessary arrangements for this. in case of any theft is found suitable penalty will be imposed on the contractor. xii contractor will maintain cubical panel board and assessories fitted in it. in case of any fault repair/replace of material will be done by the contractor at his own cost. no extra payment will be made on behalf of material. xiii contractor has to keep ready total fixtures. in case of fault of fixture a penalty of rs.100/- per fixture per day will be imposed on the contractor., regular operation and maintenance of street light fixtures hpsv/ hpmv (70w/150w) in ranpur, kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register sh

Central Government And Public Sector

CTN :45730821

07 Jul, 2026 NA

Bangalore - Karnataka

Tender For supply of portable handheld digital gauss meter (tesla meter) to model no. d20b of m/s lab magnet orexactly equivalent, complete with probe, battery, carrying case, calibration certificate, warranty certificate,technical datasheet, and all standard accessories. specifications: 1) type : digital, 2) measurement : ac/dcmagnetic field, 3) range : up to 20,000 gauss, 4) resolution : 0.1 gauss, 5) accuracy : +/- 1.0% or better, 6) display : digital lcd, 7) probe : suitable for magnetic surface measurement, 8) power source : battery operated, 9) battery life : minimum 18 hours. note: the offer shall accompany the catalogue / brochure of theitem. [ warranty period: 12 months after the date of delivery ] ]

CTN :45742665

10 Jul, 2026 NA

Sonitpur - Assam

Tender For supply of copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763 (q3) , bathroom water shower (v2) (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , plastic seats and covers for water - closets as per is 2548 (q3) , soap dish - case (q4) , flexible drain hoses for wash basins/ sinks (q3) , towel ring (q3) , stainless steel sinks for domestic purposes (v3) as per is 13983 (q2) , towel rail (q3) , water storage tank 500 ltrs , water storage tank 1000 ltrs , looking mirror 450 by 600mm with pvc frame , float valve brass 20mm complete with rod and ball , wire mesh ss 1 pt 2 m wide 15m long , cp paper roll , olive green paint , weather coat primer , black paint , flash strip self adhesive 100mm by 1mtr , curtain bracket decorative type , rubber gasket with almn body snake guard for door 1 mtr long , hydraulic door closer , brass peg set of six , cement ppc 50 kgs , ss curtain rod size 24 25mm 10 ft long , door handle aluminium 150 mm , self adhesive app membrane 3 mm thick , oil putty , pvc connection 15 by 450mm , sliding door bolt 300 mm aluminium , pvc swr tee 75mm , pvc float valve 25 mm bore incl balls , grating cp 125mm , tower bolt aluminium 150mm , floor drain tapes grating pvc 100mm , tank cover of 500 ltr , ms hinges 100mm , rubber washer for flushing cistern incl balls , hasp and staple 75mm , cpvc 20 by 15 inch brass socket , pvc connection 15 by 600mm , door stopper 100mm long , cpvc tank connector 25 mm , cpvc 25 by 20 inch fabt , elbow gi 15 mm isi marked , tower bolt almn 100 mm , cpvc fabt 25mm , tee reducer gi 20 mm to 15 mm isi marked , gi elbow 20 mm isi marked , helical door spring 200 mm , cpvc 25 by 20mm brass mabt , ms hinges 50mm , cpvc mabt 25mm , cpvc brass elbow 25mm , m seal , cpvc 20mm mabt , white cement , drill bit 6 mm , but hinges 75mm , oil bound distemper , cement based paint , cpvc fabt 20mm , gi tank nipple 25mm , cpvc 20 by 15mm brass mabt , brass spindle 15 mm for stop cock , taflon tape , brass spindle 15 mm for bib cock , glass shelf 600 mm , cpvc brass socket 20mm , aluminium door handle 100 mm , cpvc brass elbow 20 mm , cpvc elbow 20 mm bore , glass cutter , cpvc tank nipple 20mm , pvc connection pipe 900mm , urinal waste pipe 32mm , aluminium tower bolt 75mm , nails 3 inch , nails 2 inch , cpvc reducer socket 20 by 25 mm , nails 1 inch , hacksaw blade 2 pt 5mm thick , aluminium handle 75mm , cpvc socket 20mm , stop cock brass concealed 20 mm , tower bolt almn 200mm , cpvc brass tee 20 by 15 mm , cpvc gate valve 25 mm , cpvc gate valve 20 mm , pvc swr pipe 40 mm , pvc swr elbow 40 mm , pvc swr tee 40 mm , wash basin anchor fastener size 8 mm , wash basin anchor fastener size 10 mm , cpvc pipe 25 mm , cpvc pipe 20 mm , brass spindle for concealed stop cock length 3 inch , brass spindle for concealed stop cock length 2 pt 5 inch , brass spindle for concealed stop cock length 2 inch , brass spindle for concealed stop cock length 1 pt 5 inch , long bend pipe for flushing cistern //bid details 2 / 93

CTN :45742273

08 Jul, 2026 NA

Dehradun - Uttarakhand

Tender For supply of led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , plasticized pvc tapes with non-thermosetting adhesive for electrical purpose (v2) isi marked to is 7809 (part 3/ sec1) (q2) , rotational moulded polyethylene water storage tanks (v3) conforming to is 12701 (q3) , moulded case circuit breakers (mccb) conforming to is/iec 60947 (part 2) (q2) , xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , cable joint kit suitable for cables up to and including 33 kv (v2) (q3) , pvc insulated copper cable single core and multi core circular sheathed with rigid conductor (v2) isi marked to is 694 (q2) , led batten light (led tube light) (v2) (q2) , led luminaire (recessed luminaire) (ceiling light) conforming to is 10322 (part 5/section 2) (v4) (under bis scheme - ii) (q2) , led luminaire for floodlight conforming to is 10322 (part 5/section 5) (v3) (under bis scheme - ii) (q2) , self ballasted led lamps (led bulb) (v3) conforming to is 16102 (part 2) (under bis scheme - ii) (q2) , bathroom or toilet mirror (v3) (q4)

By Cities

By States

By Agencies

By Ownerships

By Sectors