Cast Iron Tenders

Central Government/Public Sector

CTN :45346090

27 Jun, 2026 NA

East Singhbhum - Jharkhand

Tender For corrigendum : supply of design and fabrication of continuous vacuum distillation and casting facility of magnesium

State Government

CTN :45533108

23 Jun, 2026 1.87 Lacs

Jhajjar - Haryana

Tender For job no.1212/2026 (hew) work of providing and fixing and installation open gym equipments and supply and installation cast iron bench in prithviraj chauhan park in sector-6, at u/e jhajjar and all other works contingent thereto. (re-invited) - 26.58.3 supply and installation of garden bench3 cast iron bench of 1800 mm length, 900 mm width, 450 mm seating height, sides made of cast iron. seat and back shall be made of 10 stripsof m.s. pipes 63 mm x 25 mm of 14 gauge with one m.s. flat 25 x 10 mm welded at the centre, below and back of the seat and back rest. spray painted with approved brand paint. fixed by grouting with 1:2:4 cement concrete (minimum weight of each bench 105 kg). all materials required to be as per bis specifications., app. item double cross trainer main pipe 114 mm od & 3.75 mm thickness m/s round pipe handles made of 38mm x31 mm m/s round pipe with best quality rubber handle for hand grip working with rubber seal bearing system and foot rest main pipe for 60 x 40 mm m/s flat pipe size of foot rest 5.5"x12" with base plastic cover all alloy cover with ss cover all m/s pipe best quality powder coating., app. item double leg press main round pipe 114 mm od & 3.75 mm thickness m/s round pipe seat made of m/s sheet 16gauge size of seat is 12"x12" fixed on 48 od round pipe smoothly working with rubber bearing system all alloy covered with s.s cover plastic base cover and best quality powder coating., app. item shoulder bilder main pipe 114 mm od & 3. 75mm thickness 17" round wheel made of 31 mm round pipe 25 mm round pipe with bearing system and s.s nut cover with plastic handle and u bend join with main 114 mm pipe for steering wheel is 48 mm od round pipe all alloy cover withs s cover best quality plastic handle on wheels &base fixed with nut bolt 8 mm m/s plate with plastic cover with best quality powder coating, app. item double chest press made of 114 mm od & 3.75mm thickness 38 mm round pipe 48 mm round pipe soxs0 mm sq pipe complete operating with bearing system with rubber seal bearing all alloy are covered the s.s covers & best quality rubber handles for grip and smoothly working. plastic base cover and best quality powder coating

State Government

CTN :45533116

23 Jun, 2026 1.87 Lacs

Jhajjar - Haryana

Tender For job no.1213/2026 (hew) work of providing and fixing and installation open gym equipments and supply and installation cast iron bench in swami omanand smriti van park in sector-6 at u/e jhajjar and all other works contingent thereto. (re-invited) - 26.58.3 supply and installation of garden bench3 cast iron bench of 1800 mm length, 900 mm width, 450 mm seating height, sides made of cast iron. seat and back shall be made of 10 stripsof m.s. pipes 63 mm x 25 mm of 14 gauge with one m.s. flat 25 x 10 mm welded at the centre, below and back of the seat and back rest. spray painted with approved brand paint. fixed by grouting with 1:2:4 cement concrete (minimum weight of each bench 105 kg). all materials required to be as per bis specifications., app. item double cross trainer main pipe 114 mm od & 3.75 mm thickness m/s round pipe handles made of 38mm x31 mm m/s round pipe with best quality rubber handle for hand grip working with rubber seal bearing system and foot rest main pipe for 60 x 40 mm m/s flat pipe size of foot rest 5.5"x12" with base plastic cover all alloy cover with ss cover all m/s pipe best quality powder coating., app. item double leg press main round pipe 114 mm od & 3.75 mm thickness m/s round pipe seat made of m/s sheet 16gauge size of seat is 12"x12" fixed on 48 od round pipe smoothly working with rubber bearing system all alloy covered with s.s cover plastic base cover and best quality powder coating., app. item shoulder bilder main pipe 114 mm od & 3. 75mm thickness 17" round wheel made of 31 mm round pipe 25 mm round pipe with bearing system and s.s nut cover with plastic handle and u bend join with main 114 mm pipe for steering wheel is 48 mm od round pipe all alloy cover withs s cover best quality plastic handle on wheels &base fixed with nut bolt 8 mm m/s plate with plastic cover with best quality powder coating, app. item double chest press made of 114 mm od & 3.75mm thickness 38 mm round pipe 48 mm round pipe soxs0 mm sq pipe complete operating with bearing system with rubber seal bearing all alloy are covered the s.s covers & best quality rubber handles for grip and smoothly working. plastic base cover and best quality powder coating

State Government

CTN :45558226

22 Jun, 2026 34.31 Lacs

Chamba - Himachal Pradesh

Tender For tender for prov. and fixing of equipment / material , design, erection, testing , commissioning for sop to jsv for inspection hut at cheel bangla chowari by prov. 11/0.4 kv 100 kva dtr along ht, lt line in es chowari-ii (u) esd chowari ed dalhousie - (a) supply part-11/.4 kv 100 kva distribution sub station, 11/.4 kv 100kva dtr (rec sep. ord 11/1976, prov. st pole pole 9 mtr. long w/l 220kgs, muff for steel tubular pole with concrete filling, x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for incomer line, ms a.i.(50x50x6 mm), length: 2800 mm x(2 nos for las ), x-arm: [channel iron (75x40x5 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer], ms a.i.(50x50x6 mm), length: (2800 mm) x 1 no., ms a.i.(50x50x6 mm), length: (950 mm) x 2 nos. of bed knee bracing, ms angle iron (50x50x6 mm), length : (2800 mm) x2 nos for transformer lt distribution box and g.o switch fixing assembly, g.i. wire for earthing, ms angle iron (50x50x6 mm), length : (450 mm)x1 nos for transformer lt distribution box and g.o switch fixing assembly, g.o. switch handle supporting: [c.i. (75x40x6mm), length: 460mm for transformer lt distribution box and g.o switch fixing assembly, g.o ab switch unit (11kv,400,663ka) tripple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class, discs insulator sets (comp. 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) i/c dead end clamps etc.), stay set complete, stay wire (7/3.15mm)( 10 kg per stay set), pipe earthing with gi,charcoal & salt, prov. lt distribution panel with mccb (160 a, 10 ka, 4p,1 no.) & sfu (32 a 5 no. rewireble) for 100kva trf. as per specification, half clamp (m.s. flat 50x6), full clamps (m.s. flat 50x6), m. s. nuts & bolts off sizes (galvanised coated) [prefarably 16mm or more (with flat and spring washer), aluminium thimbles 300 mm sq., copper thimble 200 mm sq., danger plate, barbed wire (rec sp f 3/1981), lt cable 3-1/2 core-185mm sq., alluminium paint, prov.acsr, 6/1/3.35 mm, chain link fencing , angle iron, gate etc. for transfromer fencing, prov. transformer bed plinth for 1x400kva s/stn structure complete with cc 1:6:12 r.r. massonery & plastering etc. a/w chain link fencing, angle iron gate etc. for dtr fencing., lt switched caapcitors 36-kvar for 100 kva dtr, trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure)., supplying and stacking of good earth at site including royalty and carriage upto 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment)., fine dressing of the ground., spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately)., supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : screened through sieve of i.s. designation 20 mm, filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded)., providing and fixing korean grass turf superior qualitywith earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days

State Government

CTN :45524210

18 Jun, 2026 2.93 Lacs

Jaipur - Rajasthan

Tender For supply of cleaning material in cmr b. no.-8 civil lines-i, jaipur - colin glass cleaner (500 ml), odonil room spray (220 ml), surf excel powder 500 gm., surf excel powder 5 kg., dettol liquid soap dispenser 200 ml., dettol liquid soap can 5ltr., hit(red) 400 ml., hit(black) 400 ml., harpic(red)1ltr., harpic(blue)1ltr., godrej ezee liquid1kg., surf excel liquid detergent 1ltr., ariel liquid detergent 1ltr., glade touch with machine1pkt., glade touch refill (pack of 3 refill) 1 pkt., godrej air pocket (pack of 5) 1 box, phool jhadu1pc., seekh jhadu1pc., lizole lemon/rose 1 ltr., lizole lemon/rose can 5 ltr., lifebuoy soap small49gm., surf excel soap bar250gm., vim bar dish wash soap300gm., vim bar tub500gm, duster 1 bundle(1x12pc)1bundle, pocha 1 bundle(1x12pc)1bundle, allout machine 1 pkt., allout refill (pack of 6 refill, 6x45 ml) 1 box, scotch brite scrub spray, toilet paper roll1roll, tissue paper box (claret brand), wet wipes (single pc) (himalaya) (1x100 pc) 1 pkt., gainda white phenyl disinfectant1ltr., gainda black phenyl 5ltr., vim liquid750ml., odonil black(pack of 4)(4x48gm)., cello kleeno wiper(long)1nos, cello kleeno wiper(medium)1nos, urinal cubes(1x8 balls)1pkt., kapoor goli (gainda brand) (naphthalence balls)20gm.

Central Government/Public Sector

CTN :45502421

17 Jun, 2026 NA

Palakkad - Kerala

Tender For corrigendum : supply of castings

Central Government/Public Sector

CTN :45502426

17 Jun, 2026 NA

Palakkad - Kerala

Tender For corrigendum : supply of castings

Central Government/Public Sector

CTN :45502429

17 Jun, 2026 NA

Palakkad - Kerala

Tender For corrigendum : supply of castings

Central Government And Public Sector

CTN :45554940

06 Jul, 2026 NA

Bongaigaon - Assam

Tender For replacement (dropping & fitment) of defective striker casting of wagon during poh as per requirement at c&w workshop, n.f. railway, new bongaigaon.

State Government

CTN :45535662

14 Jul, 2026 40.00 Lacs

Rewa - Madhya Pradesh

Tender For jail factory raw material supply - plastic cans (thick/thin/narrow-necked), kitchen sink (various sizes), thinner (1-liter pack), super-grade shellac, super-grade sandarac resin, plywood 19mm (48), plywood 12mm (48), plywood 6mm (48), sunmica/laminate (48), fevicol (1/2 kg pack), white/yellow/red earth pigment (bamatti), turpentine oil (1-liter pack), various paints (1-liter pack), iron hinges (various sizes), carpenter's pencil, triangular file 4, triangular file for large saw 8, steel screws (all sizes, pack of 100), foam 4-inch, 32 density (3x6) 100mm, foam 2-inch, 32 density (3x6) 50mm, foam 1-inch, 32 density (3x6) 25mm, rexine (all colors), wood stain - yellow (1-liter pack), babool wood scraps/offcuts, sarai wood scraps/offcuts, revolving chair wheel/caster, solution/adhesive (1-liter pack), sharpening stone (oil stone), cobbler's nails (small/large), emery cloth/sandpaper (all types), white lead/asian putty, insulating oil, basting/welding rod (no. 8, 10), plain iron rod (2, 3 sut/approx. 6mm, 10mm), iron rivets (various sizes), iron strip (1 inch wide, 1 sut/approx. 3mm thick), g.i. sheet 24 gauge, g.i. (galvanized iron) thick/thin wire, carbide, black iron sheet (12 gauge & 14 gauge), yellow wax, abrasive cloth/paper (nos. 60, 80, 120), muslin cloth, panel pins (all sizes), sheet metal box latch/hasp, sheet metal box handle, painting brushes (all sizes), m.s. iron pipes (all sizes), waterproof plywood (6 mm, 84), large metal cutter blade, small metal cutter blade, tacki amber (adhesive), metal/wood primer, iron pipe (1 inch), measuring tape (3 meters), long steel hinge (6 feet), steel pipe inserts/plugs, mosquito mesh/netting, plastic handle, aldrop, runda (hand planer) machine cutter blade, laminated board (18 mm), section (b) weaving industry, fittings, rock salt, dyes/colors (all types, fast/permanent), canvas strap (4 inches), fine belt a-82, power loom wire heald (13 inches), power loom metal reed (no. 36) x 72, fine belt a 102, b-37, b-43, fadi 72 x 20, fine belt a 94 and a 120, grease servo super (in 1 kg pack), mobil oil servo super 15w-40 (in 20-liter pack), section (c) stitching/tailoring industry, white thread terrycot (800 meters), hook/needle plate (throat plate), shuttle (small machine), top rod, feed dog, plate, white transparent buttons (in pack of 1000), bobbin case, tailor's measuring tape, tailor's chalk (pack of 10 pieces), machine oil (in 1-liter pack), hand needle no. 7 (reel), machine needle no. 18, 21, interlock needle, lily (thread/yarn), press buckram, section (d) sizzing/tracing paper industry, white paper (1727) 57 gsm, white paper (1822) 57 gsm, laser paper (1727) 80 gsm brown paper (3646), plastic sheet (110 microns), universal wash (in 5-liter pack), fountain concentrate (in 5-liter pack), offset jobbing black ink (in 1 kg pack), binding cloth, binding thread (6/20), refined wheat flour (maida), arrowroot powder, ivory sheet (2228) 300 gsm (mpr paper), colored card sheet (2228) 210 gsm, copper sulphate (blue vitriol), boda yellow/white (in various weights/ounces), ruled paper (1626) 57 gsm, offset sponge, rin supreme soap (250g pack), twine/sutli, cover paper (2336) 110 gsm, answer booklet ruled paper (1822) 57 gsm, roller cloth (no. 90), roller cloth (no. 160), blanket (2123), colored card sheet (2228) 180 gsm, coated card sheet (2228) 200 gsm, cover paper (2030) 110 gsm, colored paper (1822) 54 gsm, scrap paper (2030), stapler pins (no. 24), one-side coated card sheet (2228) 180 gsm, numbering machine in central jail rewa m.p.

By Cities

By States

By Agencies

By Ownerships

By Sectors