Tender For custom bid for services - defect rectification of acsr 2 (south tower)-defect., in has reported that tracks are not available on display of acsr #2., defect identification., di for the same was undertaken on 13 jun 2025. it was found that the pedestal unit, was required to be replaced to rectify the defect., scope of work to undertake defect rectification., 1. spare part., the required pedestal unit for replacement will be provisioned by in on site. all other, components/ units of acsr #2 should be in place to operationalize the system., 2. manpower., three skilled technicians will be required to undertake the pedestal replacement work., one tower climber also needs to be available on site. the tower climber and two, technicians will be provisioned by hela., 3. material/ machinery., one overhead crane with a loading capacity of one ton lifting to a height of 35 mtrs is, required to undertake the work. the same will be provisioned by in., 4. tools and accessory., the following are required and will be provisioned by hela:-, (a) torque wrench, (b) level indicator, (c) eye hook -02, (d) two 50 mtrs rope, (e) silicon, (f) drill machine, (g) lubricant, (h) slings for lifting, 5. activity to be undertaken., the sequence of events for replacement of pedestal unit will be as tollows:-, (a) disconnect and remove all cables, wave guide ard units from the antennae assembly., (b) fitment of lifting eye hook on antenna and pass lifting slings to the eye hook. dismantle antenna from pedestal unit and keep it on even surface on, the ground with the help of overhead crane. special care is o be undertaken while handling waveguide., (c) hook on the pedestal unit on overhead crane and op an securing bolts, of pedestal unit. lift the pedestal and move to the ground with cap closed of all connectors., (d) hook up new pedestal and lift it to the tower top and w hen aligned with, the position of pedestal plate lower the pedestal on the plate and tight the nut, bolt with level indicator on top of the pedestal to confirm tht the same is at, zero level., (e) lift the antenna to the top of tower and fix it to the pede stal unit., (f) install all units of acsr on top of tower and fix connectors and waveguide to the antenna., (g) switch on power and carry out power checks and fo (hecks., (h) switch on the acsr server and carry out alignment of system to get the tracks appeared on the display., 6. safety., all man working on tower should wear safety belt, safety helmet and safety belt to be, tied on two rigid point at tower top. the man below tower for handlin activity should, wear helmet. the antennae assembly and pedestal unit should be se cured with twopoint safety rope while lifting and lowering the same to avoid any dan age to the man, and material view heavy wind, lifting jerk or swing of the crane sling., .
Tender For purchase of desktop pcs along with accessories viz. printers & ups for office works for newly created o/o addl. ce , gare pelma sector-iii coal block gharghoda
Tender For corrigendum : construction of 03 nos 120 jawan barrack i/c 01 nos generator room for 37bn itbp campus at thiksey leh, ladakh ut including internal electrical installation, central heating system, solar water heating system, automatic fire alarm system, solar power system water supply and sanitary installation sh providing services of skilled data entry operator and semi skilled office staff at leh electrical sub division office 5th bn campus under contingencies head
Tender For corrigendum : dental equipments / instruments - 3 point articulator/plane articulator (mean value articulator), acryliser programmable preheating time & temperature programmable curing time & temperature analog control unit capacity-6-8 flask digital programming, adson tooth forceps 5 , adsons tooth forceps 8 , advance digital microscope with imaging software (with desktop + printer + ups + mouse) optical system- infinity color corrected optical system observation tube: seidentopf digital viewing head, 3.2 million pixels high resolution camera system resolution ratio 2048*1536 pixels, line by line scan eyepiece: high eye point wide field plan eyepiece pl10x/20mm, with 5 degrees diopter control, ipd: 50-75mm objective: plan achromatic objective 4x plan achromatic objective 10x plan achromatic objective 40x spring plan achromatic objective 100x s, oil nosepiece: backward quadruple nosepiece illumination- main supply 100v-240v, 3 watt led lamp or 6v/20w halogen with intensity control (fixed center focusing adjustment: coaxial coarse and fine focusing adjustment, with limited and tension adjustment coarse adjustment range: 25mm fine adjustment precision 0.002mm. condenser: n.a.1.25 condenser (with socket for phase contrast and dark field sliders) stage: coaxial mechanical stage 140x132mm size and 76 50mm travel range. inbuilt microscopic scientific digital camera with imaging software consisting of: high resolution digital camera with 1/2 cmos chip usb 2.0 pc connection real time live image resolution: 3 mega pixels electronic shutter exposure time: 1ms-0.3s working temperature: -20 c ~ 70 c image analysis software: sportily calibration line measurements for distance, length, width, perimeter, angle, three point radius. area by enclosed line controlled by four arrow keys available on the keyboard arrow with zoomed preview the line measurement is not affected on zoomed images. identification of objects in an image, count them, obtain several features measurements. objects identification by user or automatically. user defined classification on basis of size or intensity. manual, auto bright and auto dark methods to identify intensity range defined object to be measured. various calculation & measurements available for selected particle are; dimensions, area, perimeter, ferrite length, min/ max radius, thread length, thread width, fiber length, fiber width. roundness, shape, orientation, elongation, equal circular diameter, equal sphere volume, data export report generating and print out interactive file format., agate spatula, air conditioner, air purifier, airotor cartridge suitable for nsk airotor hand piece, airotor control box with inbuilt micromotor , 3 way syringe & 02 nos. airotor control with trolly, airotor hand piece (chuck), airotor hand piece noiseless ultra push type with ceramaic bearing super torque head, airotor oiling machine, alcohol torch with adjustable flame, alginate mixing spatula, allis forcep 5 , allis forcep 6 , alloy cutter compact alloy cutter with high speed grinding and dependable trouble free operation with vaccum suction safety glass for glare elimination and visual protection 20000 rpm, amalgam carrier, amalgamator, anesthesia machine (boyle apparatus) 1. ms & aluminum combined structure with polyurethane coated finish for long life. 2. forged body regulators for medical oxygen & nitrous oxide for maintenance free operation. 3. two numbers each forged yokes with ss fittings for medical oxygen & nitrous oxide at the sides. 4. colour coded yoke mounted high pressure gauges. 5. two tube rotameter with oxygen ratio controller with unitized rotameter. 6. magill s breathing system one number in addition. 7. bain s breathing system one number in addition 8. safety features : oxygen failure warning device (ofwd) nitrous oxide cut off in the absence of oxygen oxygen ratio controller 9. large diameter castor wheels with individual brakes at front castors 10. one year standard warran
Tender For supply of miscellaneous consumables for unit coh and routine maintenance work at emd-2-tg wtps,gsecl. - ht pvc insulation tape size 0.18 mm x25 mm x 65 mtr length, pvc insulated copper unshethed flexible wire 1.5 sqmm,1100 v, godrej make 7 lever door lock, pvc insulated, unsheathed flexible copper cable size 1 core x 2.5 sq. mm, 1100 v grade, polyester webbing sling, swl 5000 kg x 3 mtr, impact wrench power/battery operated, cordless screw driver power/battery operated, flat cable 3 corex4 sqmm with copper conductor for submersible motor, painting brush size 3" (75 mm), painting brush size-38 mm, allen key set of size : 1/16" (inch) to 3/8" (inch), allen key set of size 1.5 to 10 mm, rusting clean brush, wire brush round 1.1/2", plastic dori (sutari) for binding of plastic ,0.5 thick &2mm width., hand drill machine size 13mm, britelite 1200 meters long rang torch rechargeable led flashlight with charger., drill bit set it/addision,size;2 mm to 10 mm., pvc hand gloves acid/alkali proof size 16" (yelow colour), esab earthing clamp, washing powder ( 1 kg pack ), transparant tumbler 1 ltr, pvc buckets-15ltr, painting brush size 2" (50 mm), self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of red colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of yellow colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of blue colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of black colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of green colour, dr. back make backtol red in 1 lit. tin varnish, light gray paint size 4 liters light gray paint size >> 1 liter., rotary selector switch capacity-12amp ,3 way no-off 3 position 60 degree,kaycee make cat no-2t16c, test leads (probes) for digital multimeter, auxiliary relay re-300 coil voltage 250v dc, jyoti make re-300 plug in type relay , coil voltage 240 v,50hz ac with led indication & 4 change over contact having 10 amp rating., plastic tool box with organizer product no.:- ptb 16 (195 x 240 x 435), integral led type solid state indicating lamp module for supply voltage of 230 v ac/dc +/- 10 percent , suitable to panel cut out 30.5 mm dia., lens colour - red., integral led type solid state indicating lamp module for supply voltage of 230 v ac/dc +/- 10 percent , suitable to panel cut out 30.5 mm dia., lens colour - green., integral led type solid state indicating lamp module for supply voltage of 230 v ac/dc +/- 10 percent , suitable to panel cut out 30.5 mm dia., lens colour - amber., integral led type solid state indicating lamp module for supply voltage of 230 v ac/dc +/- 10 percent , suitable to panel cut out 30.5 mm dia., lens colour - white., integral led type solid state indicating lamp with lamp holder & lens for 230 v dc +/- 10 percent panel cutout, 30.4 mm dia colour blue, start push button c & s make type- rb2-ba3+rb2-bz10 (rcb2-ba3)., mushroom head stop pushbutton turn to release c& s make,type- rb2-bs54+rb2-bz10 (rcb2-bs54)., contact element -1no. code rb2be101 make c&s, contact element, 1 nc contact, c and s cat. no. rb2-be-102, 250 v ac/dc control supply switch, capacity-16amp,type-base mount., multifunction multirange timer type:-micon225 0.1 sec -10 hrs., 24/240 vac/dc, cat no: 2a5dt5, 2c/o make:-l&t, manila rope, size: 16 mm dia, manila jute rope size 12 mm, auxiliary relay of jyoti make re-300 with led indication, 4 c/o contacts for 110v ac., jyoti make re-300 plug in type relay , coil voltage 24 v,dc with led indication & 4 change over contact having 10 amp rating.
Tender For comprehensive annual maintenance contract for intel core i3 aio desktop computers (hp pro one 400g2 aio includes all parts & accessories/power/ adaptor/internal fan/hard drive /lcdpanel//memory ram/processor /system board etc. for the period of one year installed at various getco office.
Tender For tender for supply of integrated circuits d d - ic , smd , lvcmos , low power programmable oscillator , 100mhz , 3.2 x 2.5 mm , -40 to +85 deg cel , ic , smd , sdram , ddr3l , 512m x 16 bit , 96 pin fbga , -40 to +85 deg. cel , ic , smd , voltage level translator , bi directional , 4 bit , vqfn , 14 pins , -40 to +85 deg. cel , ic , smd , voltage level translator , single channel , 8 bit , vqfn-20 package , -40 to +85 deg cel , i.c , spi nor flash , 256mb , 8 pin , wson package , -40 to 85 deg. cel , ic , smd , inverter , low power , sc70-5 package , -40 to +85 deg cel , ic , smd , single bus , buffer , open drain output , non inverting , sc70-5 pacakge , -40 to +125 deg cel , ic , power management unit for arm processor , nfbga package , 169 pin , -40 to +85 deg cel , ic , smd , low jitter clock generator , four output , vqfn package , 32 pin , -40 to +85 deg cel , ic , smd , ldo voltage regulator , 1.5a , 0.8v to 5.5v , vqfn-20 package , -40 to +125 deg cel , ic , smd , single channel , rs232 line driver/ receiver , 250kbps , tssop-16 package , -40 to +85 deg cel , ic , smd , voltage monitor , single , uv/ ov , sot 23 package , 8 pin , -40 to +125 deg cel , ic , smd , piezo sounder driver , audio amplifier , qfn 2020 package , 10 pin , -40 to +85 deg cel , ic , spdt analog switch , sot-23 pkg. , -40 to 85 deg. c , ic , or gate , 1 channel , 2 input , sot 23-5 package , -55 to +125 d.c , ic , smd , cmos , single , 2 input and gate , sc 70-5 package , -40 to + 125 deg cel-sa3b2012879s1t9 , ic , smd , lvcmos , low power programmable oscillator , 100mhz , 3.2 x 2.5 mm , -40 to +85 deg cel