Consultancy Service Tenders

State Government

CTN :40123766

29 Apr, 2025 NA

Hyderabad-T - Telangana

Tender For agencies/consultants for "urban challenge fund for various urban infrastructure and governance projects bankable projects-consultancy services for documentation, preparation of preliminary proposals/updation/ground validation of existing dprs with outcome/impact of the project to comply with urban challenge fund guidelines in securing funds from external funding sources, mohua, and financial institutions etc."

Central Government/Public Sector

CTN :40134933

16 May, 2025 NA

Goa - Goa

Tender For supply of overhead crane , obs , installation and commissioning spares , technical documentation , service engineer charges

corporations/Associations/Others

CTN :40126145

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

corporations/Associations/Others

CTN :40126147

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

CTN :40118881

15 May, 2025 NA

Mumbai - Maharashtra

Tender For supply of 10 signaling projector system. , bulkhead mounted units consisting of the following a. bulkhead mounted ip_56 control unit 1no.b. bulkhead mounted ip_56 power supply unit - 1no. , vibration mounts and installation material such as nuts bolts mounts etc , obs for signalling projector , documentation for signalling projector , stw , sats , hats , training , monthly warranty extension charges for 12 months beyond dec_2027 to be obtained from the vendor

CTN :40124670

08 May, 2025 NA

Mumbai - Maharashtra

Tender For supply, installation, commissioning, training and documentation of circulation bath 5 & 25 deg c laboratory instruments at bpcl mumbai refinery lab.

CTN :38934035

02 May, 2025 NA

Kolkata - West Bengal

Tender For corrigendum : supply of starting and working air compressor - 30 bar md compressor with accessories_575501040001_1000056064_3041 , on board spare for 30 bar md compressor_575501045004_1000056064_3041 , tools for 30 bar md compressor_575501047603_1000056064_3041 , documentation for 30 bar md compressor_575501048114_1000056064_3041 , instl and comm spares_30 bar md compressor_575501048204_1000056064_3041 , 1st submission of bd_30 bar md compresor_575501048115_1000056064_3041 , preservtn_consumbles_30 bar md compresor_ser07510_1000056064 , training for 30 bar md compressor_ser07511_1000056064 , serv engineer for 30 bar md compressor_ser07512_1000056064

CTN :39884702

02 May, 2025 NA

Kolkata - West Bengal

Tender For corrigendum : supply of windows and window wipers and cvs for grse yard 3041 orv - o-p window with spg_wht_w3_10mm thk_371508800101_3041 , fixed window with spg_wht_w2_10mm thk_371507790101_3041 , o-p window with spg_wht_w3_10mm thk_371508800102_3041 , o-p window with spg_wht_w2_10mm thk_371508800103_3041 , fixed window with spg_wht_w4_10mm thk_371507790102_3041 , fixed window with spg_wht_w4_10mm thk_371507790103_3041 , fixed window with spg_wht_w4_14mm thk_371507790104_3041 , fixed window with spg_wht_w1_10mm thk_371507790105_3041 , fixed window with wiper_wht_w1_22mm thk_371507790106_3041 , fixed window with wiper_wht_w3_22mm thk_371507790107_3041 , fixed window with wiper_wht_w2_22mm thk_371507790108_3041 , fixed window with wiper_wht_w1_22mm thk_371507790109_3041 , fixed window with wiper_wht_w2_20mm thk_371507790110_3041 , fixed window with wiper_wht_w3_20mm thk_371507790111_3041 , fixed window with wiper_wht_w2_14mm thk_371507790112_3041 , fixed window with wiper_wht_w3_14mm thk_371507790113_3041 , fixed window with wiper wht_w2_18mm thk_371507790114_3041 , fixed window with wiper_wht_w3_20mm thk_371507790115_3041 , fixed window with wiper_wht_w2_16mm thk_371507790116_3041 , fixed window with wiper wht_w1_18mm thk_371507790117_3041 , fixed window with wiper_wht_w3_16mm thk_371507790118_3041 , fixed window with cvs_wht_w2_20mm thk_371507790119_3041 , fixed window with wiper_wht_w2_22mm thk_371507790120_3041 , fixed window with wiper_wht_w3_20mm thk_371507790121_3041 , fixed window with wiper_wht_w1_22mm thk_371507790122_3041 , fixed window with wiper_wht_w3_20mm thk_371507790123_3041 , fixed window with wiper_wht_w2_20mm thk_371507790124_3041 , fixed window with wiper_wht_w3_14mm thk_371507790125_3041 , fixed window with wiper_wht_w2_14mm thk_371507790126_3041 , fixed window with wiper wht_w3_18mm thk_371507790127_3041 , fixed window with wiper_wht_w2_20mm thk_371507790128_3041 , fixed window with wiper_wht_w3_16mm thk_371507790129_3041 , fixed window with wiper_wht_w2_16mm thk_371507790130_3041 , fixed window with cvs_wht_w3_20mm thk_371507790131_3041 , o-p window with wiper wht_w1_18mm thk_371508800104_3041 , fixed window with wiper_wt_w2_14mm thk_371507790132_3041 , fixed window with wiper_wt_w1_20mm thk_371507790133_3041 , fixed window with wiper_wt_w4_20mm thk_371507790134_3041 , fixed windo with wiper_wt_w4_18mm thk_371507790135_3041 , fixed window with wiper_wtr_w3_14mm thk_371507790136_3041 , fixed window with wiper_wt_w4_12mm thk_371507790137_3041 , fixed window with wiper_wt_w3_12mm thk_371507790138_3041 , fixed window with wiper_wt_w2_14mm thk_371507790139_3041 , fixed window with wiper_wt_w2_10mm thk_371507790140_3041 , fixed window with sd_wht_w1_19mm thk_371507790141_3041 , o-p window with sd_wht_w1_19mm thk_371508800105_3041 , fixed window_wt_w1_19mm thk_371507790142_3041 , on board spares for 2 years exploitation_370351010001_3041 , documentation -hard copy-_379015030106_3041 , documentation -soft copy-pen drive-_379015030107_3041 , installation and comissioning spares_378412010001_3041

CTN :39884747

02 May, 2025 NA

Kolkata - West Bengal

Tender For corrigendum : supply of scuttles for grse yard 3041 orv - scuttle_wht_o-p with deadlight_372103061101_1000057703_3041 , scuttle_wt_o-p with deadlight_372103061102_1000057703_3041 , scuttle_wt_fixed with deadlight_372103061103_1000057703_3041 , on board spares for 2 years exploitation_370352010001_1000057703_3041 , documentation -hard copy_379021030011_1000057703_3041 , documentation - soft copy-pen drive_379021030012_1000057703_3041 , installation and comissioning spares_378413010001_1000057703_3041

CTN :40118719

15 May, 2025 NA

Dehradune - Uttarakhand

Tender For providing of custom bid for services - hiring of technical services for image processing algorithm implementation and documentation

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others