Get complete information related to latest Copper Product Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Copper Product Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Copper Product Tenders.
Tender For supply of hydraulically regulated door closers conforming to is 3564 (q3) , prelaminated mdf board (q3) , tower bolts (non- ferrous metals) v2 as per is 204 (q2) , copper alloy gate valve for waterworks purpose (v2) conforming to is 778 (q3)
Tender For corrigendum : tender for supply of electrical consumable and miscellaneous items for hurl sindri c - cable tie, lock type cut to open, colour-white, thickness-2.5mm, length-100mm, material nylon 66, pack size 100. cable tie, lock type cut to open, colour-white, thickness-2.5mm, length-200mm, material nylon 66, pack size 100. cable tie, lock type cut to open, colour-white, thickness-2.5mm, length 300mm, material nylon 66, pack size 100. electrical contact cleaner spray, quick dry, packing size for liquid(ml)-500ml galvanized zinc spray, finish type-bright silver, zinc-enriched coating to repair surface damage protection against corrosion, special feature-rust resistance, packing size for liquid(ml)-500ml. silica gel, colour of silica gel-blue, particle size -9 to 12 mm, air tight container for packing of silica gel-plastic. silicon sealant, physical state- viscous paste, appearance-translucent/ opaque, color-clear/black/white/gray, surface cure-5-10 min, packing size(ml)-300ml m-seal, shelf life 12 months, hardness 75-80, impact strength - 2.5 * 3kg / c * m setting time at 30 deg c min-60 min, working temp limit 80 deg. c component resin and hardness, packaging size-1 kg gap filling pu foam spray(puf seal), application fill the gap between wall & tray, conduit pipe and wire sealing, packing size for liquid(ml)-750ml. silicon sealant gun, feed type: push-fed gun, type: cordless-corded glue gun pvc tape, material pvc, adhesive-rubber bases adhesive, adhesive side- single side, temperature range (-40 degree c to 125 degree c), colour red, length-6.5 mtr, voltage resistance- upto 600v. pvc tape, material pvc, adhesive- rubber bases adhesive, adhesive side- single side, temperature range (-40 degree c to 125 degree c), colour yellow, length 6.5 mtr, voltage resistance-lipto 600v. pvc tape, material-pvc, adhesive- rubber bases adhesive, adhesive side-single side, temperature range (-40 degree c to 125 degree c), colour blue, length 6.5 mtr, voltage resistance-upto 600v pvc tape, material -pvc, adhesive rubber bases adhesive, adhesive side- single side, temperature range(-40 degree c to 125 degree c), colour-black, length 6.5 mtr, voltage resistance- upto 600v. pvc tape, material pvc, adhesive-rubber bases adhesive, adhesive side- single side, temperature range (-40 degree c to 125 degree c), colour green, length 6.5 mtr, voltage resistance upto goov ht-tape, self bonding electric tape, for high-voltage(upto 69kv), corona and ozone resistant, moisture and corrosion resistant, overload temperature 130 deg. c. roll size 9.15 meters. teflon tape, packing type-piece, elongation % 50-60, length of tape-9 mtr, application of colour tape white al foil tape, color-sever, type-aluminium foil tape 2 inch, cello tape type single sided, tape dispenser type-high bond, self adhesive, cello tape roll size-15 meters waste cotton doth emery paper, grit size grit 40-60, material emery, form-belt, bonding type-resin, coat type-open coat, suitable material mild steel, stainless steel. roll length-40 inch. emery paper, grit size-grit 220-400, material-emery, form-belt, bonding type-resin, coat type-open coat, suitable material mild steel, stainless steel roll length 280 mn trubble gum, strong glue trap, type- glue board, container type-sachet, protection against-rats titanium putty, 1 kg 1.5 sq.mm ring type lug, insulated type, rated voltage-upto 1100v, material copper, minimum pack of 200 2.5 sq.mm ring type lug, insulated type, rated voltage-upto 1100v, material copper, minimum pack of 100 4 sq.mm ring type lug, insulated type, rated voltage-upto 1100v, material-copper, minimum pack of 10 1.5 sq.mm pin type lug, insulated type, rated voltage-upto 1100v, material-copper, minimum pack of 200 2.5 sq.mm pin type lug, insulated type, rated voltage-upto 1100v, material copper, minimum pack of 20
Tender For supplying electrical materials and repair maintenance services for street lights and electrical works at. grampanchayat somatane - electrical material, supplying and erecting modular type switch6a / 10a ., supplying and erecting street light bracket for erection ofsingle fitting made from 40 mm. dia b class g.i. pipe 1.0 m in length along with pole cap of 300 mm length 100 mm dia duly welded ., providing cement concrete foundation including excavationfor the poles 60 cm x 60 cm x 1.5 m deep in 1:3:6 cement concrete (20 x 25 mm stone metal) and 45 cm x 45 cm x 45 cm/45 cm dia. x 45 cm height plinth duly plastered and with necessary curing and finishing in an approved manner.(for 8.5 to 9 m poles), supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5x3.65x3.25 mm thickness (4.5 + 1.75 + 1.75m) length respectively and total 8 m long with pole cap, base plate in provided foundation., supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm. dia with 4.5 x 4.5 x 3.65 mm thickness ( 5 + 2 + 2m ) length respectively and total 9 m long with pole cap, base plate in provided foundation., supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm dia. with 4.5 x4.5 x3.65 mm thickness (5.60 + 2.7 + 2.7 m) length total 11 m long with pole cap, base plate in provided foundation ., supplying and erecting street light bracket made from 25mm. dia b class g.i. pipe, 0.6m. in lengthalong with polecap of 300 mm length and 80 mm dia duly welded with provided leads as per specification, supplying,tpmcb 40a to 63a in provided distribution board, providing pair of duly tested rubber hand gloves as per is:4770 suitable for working upto 22kv supply., supplying and erecting insulated d.p. switch surface type/flush type 32a 240vwith indicator lamp & fuse, supplying h.c. pattern porcelain fuse bridge swith base & hc type fuse links240v 32a, supplying and erecting programmable digital almanactimer microcontroller based with real time clock to operate on derived switching on & switching off street light as per daily sunset and sunrise respectively, 1.25 mm crca sheet metal enclosures with 20a., supplying pvc insulated pvc round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper industrial cable ., supplying and erecting led street light fitting suitable for 60w lamp, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink ., supplying and erectingled street light fitting suitable for 26w to 36w led street light, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink., supplying and erectingled street light fitting suitable for 90 w led street light, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink., supplying and erecting led flood light fitting of 120w, including lamp, with pf > 0.95,class ip 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium ., supplying & laying pvc armoured cable 4core 6sq mm, supplying & laying pvc armoured cable 4core 10 sq mm, supplying & laying pvc armoured cable 2core 10 sq mm, supplying & laying pvc armoured cable 4core 16 sq mm, supplying, erecting & marking spmcb 6a to 32a, b- series (for lighting), supplying, erecting & marking dpmcb 6 a to 32 a bseries (for lighting), supplying, erecting & marking tpmcb 6 a to 32amp ., supplying, erecting & marking fpmcb 40a to 63a ., supplying & erecting crimping type aluminium lugs for cable upto 16 sq mm., supplying & erecting crimping type coper lugs for cable upto 1.5 to 6sq mm., supplying and erecting two pole power contactor 250v 32a for time switch complete erected on wooden block/provided box, with necessary materials., supplying & erecting mains with2x1.5 sq.mm f.r copperpvc insulated wire laid in provided conduit/trunk
Tender For supply of gland pecking for wb , element gasket for wb , warm gear 30 teeth for wb , warm shaft wb , spur gear 12 teeth for wb , rack pinion for wb , warm stl 03 for wb , warm lh stl 02 for wb , spur gear shaft for wb , secondary shaft for wb , primary shaft for wb , primary gear for wb , worm gear for wb , worm gear l.h. for wb , spur gear for wb , key for wb , oil seal for wb - 1e for wb , motor gasket for wb , cover gasket for wb , gasket for wb , oil seal for wb , element gear for wb , chain connector of traveling chain carriage assy , oil gun removal part j for oil gun type , spary plate.90j28 for oil gun type , copper clad asbest gasket , set of gear and pinion assembly for gc feeder inlet gate * /bid number : gem/2026/b/7644559 + /dated: 30-06-2026 ' ' / bid document 1 / 29
Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl
Tender For material supply for the installation of 4 line hanging solar power fence at rajapuram estate - hanging solar power fence, p.p reel insulator , must be of virgin plastic metirial. polypropylene or equivalent with break down voltage of 15 kv(weight 25gm avg, length 4.6 cm avg), strain insulator, must of poly polypropylene plastic rated for 15 kv uv stabillized ,(weight 40 gm avg, length 7 cm avg), gi post 12 feet , 2" gi pipe, 14 guage thickness,total 14.5 ft length modified to 12 feet length and cut and welding to 90 degree bend 2.5 feet length at top end and having diametrically opposite holes of size 6 mm at end of bend pipe, intermediate post (t angle post) , 6ft., painted(25mm*25mm*3mm)having holes of size 6 mm at required interval of fencing installation, supporting post, 10ft.,gi-1,14 guage thickness,painted, stay (t angle), 2ft., painted(25mm*25mm*3mm), 12 swg ht wire, 12 guage,2.5 mm dia high tensile wire with zinc coating for use as conducting wires,binding strain insulator, 14 swg binding wire , high quality zinc coating wire for binding reel insulator, tighing support post with corner post, 1.5 mm stainless steel wire rop 304 grade, aluminium ferruel, aluminium ferruel 3 mm, wire tightner , permanat wire tightner made of special aluminium alloy designed for kv, uv stabillized, earth rod, copper plated earth rod 14 mm -3ft. length, earthing compound, earthing compound 8 kg, gate handle, gate handle and spring assembly, handle made of polyethylene, leadout cable,leadout cable for fence system double insulated gi cable inner core wire 2 sq.mm.hot dipped galvanised steel core, capaie of with standing 15kv should be provided to prevent bimetal salt formation at connections, single core 2.5 mm sq. cable, 2.5 mm2 single core copper cable for connecting the solar panel to the tubular battery through charge control unit with required terminal sockets,nut and bolt,washer, lightning diverter, 15kv -50kv rod gap arrester,must be capable of diverting stray lightning and adjustable for spark gaps adequate earthing to be provided, 100 watt solar panel, 100 watt/12 volt and above poly cristalline with 10 year warranty having iec/mnre certification, charge control unit, 20 a,12/24 pwm charge controller unit of standard make suitable to control the charging of the tubular battery, energizer, energizer with 10 kv output safety standards to be followed are bis 302-2-76 iec60335-2-76. switch-high, medium and low power setting., fence alarm system, fence alarm system covering area of 1.5 km, solar panel sapporting stand with metal box painted (for battery and energiser), 18 guage thickness metal box(lockable). gi-sheet, painted should be capable of housing battery, charge controller and energizer and fixed with reguired clamps and nut and bolt on solar panel suppoert stand made of gi pipe of 50mm diamere and b class type with suitable arreangement for holding the panel, warning sign, polyethylene plastic with satuatory wrning with signs, tubular battery 12v , 100ah, 12 v, 100 ah c10 rating with full 5 year replacement warranty (tower battery) for energising the energiser
Tender For bid to ras corrigendum : supply of capacitors for electric fan motors as per is 1709 (v2) (q3) , pvc insulated unsheathed cable with flexible conductor isi marked to is 694 (q2) , bathroom water shower (v2) (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , copper alloy gate valve for waterworks purpose (v2) conforming to is 778 (q3) , health faucet (q3) , switch socket combined 6 amp , switch socket combined 16 amp , copper fuse wire , glass shelf 18 inches , corner glass shelf , bathroom cabinet mirror , ewc , ewc one piece , table top wash basin , wall hung ewc , cp waste coupling 40 mm , cp jet spray 15mm x 1.5 mtr long , brass float valve 15mm , pvc float valve size 15 mm with alumn rod and pvc ball , pvc float valve size 20 mm with alumn rod and pvc ball , pvc flushing cistern , pvc waste pipe , pvc waste coupling 38 or 40mm , pvc washer for tap15 mm , helical door spring , aluminum sliding door bolt , door stopper , tank cover 500 or 1000 ltrs without thread , tank cover 500 or 1000 ltrs with thread , paint brush 75mm , paint brush 100mm , thinner , black screw 15mm , black screw 25mm , black screw 40mm , black screw 50mm , oil glass putty , window plain glass sheet , stainless steel wire mesh 1200mm , ply wood one side teak face 4mm , gi pipe 15 mm dia , bend gi 15 mm , bend gi 20 mm , nipple gi 15 mm x 50mm long , nipple gi 15 mm x 75mm long , nipple gi 15 mm x 150mm long , nipple gi 20 mm x 75mm long , nipple gi 20 mm x 100mm long , gi union 15 mm , gi union 20 mm , gi union 40 mm , gi union 50 mm , gi socket 15 mm , gi socket 20 mm , gi socket 40 mm , gi socket 50 mm , reducing socket 15 x 20 mm , reducing socket 15 x 25 mm , gi elbow 15 mm , gi tee equal 15 mm , gi tank nipple 15mm , plug gi 15 mm , plug gi 40 mm , plug gi 50 mm
Tender For supply of copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , bathroom or toilet mirror (v3) (q4) , ceramic ( vitreous china ) flushing cisterns for water closets and urinals conforming to is 774 (q3) , bathroom water shower (v2) (q3) , plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763 (q3) , towel rail (q3) , flexible drain hoses for wash basins/ sinks (q3) , plastic seats and covers for water - closets as per is 2548 (q3) , solar rod stud , solar cat eyes , mirror looking , bib cock brass , tubing gi 20 mm , kitchen sink 24 inch , kitchen sink 37 inch , tubing 15 mm , kitchen sink 7 inch , kitchen rack stainles steel , mirror looking 18 inch , cement , curtain rod , hydraulic door closer , glass shelve , plywood 8 ft , nipple gi 15mm , union socket g i 20mm , european toilet seat , bib cock brass 15mm , door stopper brass , kitchen rack 30 inch , gate valve 25 mm , stop cock brass 15 mm , tee equal gi 15 mm , lock for almirah steel , wc s trap , cover for storage tank , float valve 15 mm with ball , glass shelve 600 mm , steel plate rack , toilet paper holder cp , wire mesh , shower rose cp 15 mm , cat eyes , ply wood 8 ft , particle board prelaminated , gate valve 15 mm , bend gi 15 mm , towel rail , gi elbow gi 15 mm , cp whb mixture 15 mm , waste coupling 32 mm , wire netting 16 mesh , wash hand basin , plywood one side teak face , helicol door spring , sliding door bolt , particle board , nipple gi 15 mm by 100mm , butt hinges , socket gi 15 mm , tower bolt ms 75 mm , union socket 15mm , super flash strip , wash hand basin 400 mm , tower bolt ms 100 mm , ewc p trap , bib cock brass 20 mm , plastic speed braker , sheet glass pane , helicol door spring 150mm , connection pipe pvc size 15mm dia , float valve 20 mm , bow handle , tower bolt 100 mm , pvc adhesive tape , wc indian type , gun metal valve15 mm , gi elbow 20mm , m seal , helicol door spring 300mm length , plug gi 15 mm , pvc adhesive tape 25 mm , hasp stapple , bow handle aluminium 150 mm , handle for almirah , p trap wc , butt hinges ms 100mm , urinal pipe pvc , door handle aluminium 100 mm , elephant shield liquid rubber , ms screw wood 65 mm , glass putty , putty black , cp and bracket corner 20 mm , toilet seat indian style , wash hand basin 40 inch , stop cock pvc , helicol door spring 125mm length , sliding door bolt 200 mm , sliding door bolt ms 250mm , bow handle aluminium 75 mm , tower bolt ms 250 mm , cp soap dish , sliding door bolt ms 300mm , cement 50 kgs each , cement white , paint road marking white , tower bolt alu 75 mm , pvc door seal 900 mm , pvc pipe swr 100 mm , water proofing epobyy rebyin , butt hinges ms 125mm , butt hinges ms 50mm , thiner , pvc pipe swr 75 mm , hasp and stapple alu 75 mm , hacksaw blade , pannel pin 20 mm , panel pin 15 mm , tower bolt ms 150 mm , tee gi reducing , cpvc pipe 15mm , door stopper alu , painting brush 100 mm , hasp and stapple alu 125 mm , floor drain traps , nipple ebytension cp , pvc flebyible waste pipe length 900 mm , painting brush 75 mm , switch fuse unit , rubber washer 15 mm , cp grating with hole 125 mm , oil bond distemper , painting brush 50mm , cp grating with hole 100 mm , tee reducing 15 mm , door stopper double , thread tape white , enamel paint brown , pvc multi floor trap 75 mm , pvc bend 75 mm , pvc multi floor trap 50 mm //bid details 2 / 118