Corrugated Sheet Tenders

State Government

CTN :44900106

25 Apr, 2026 80.00 Lacs

Jalore - Rajasthan

Tender For , pila/kankar/jhajhra , , mortar/mud mixture , , lime from bud kiln for lime masonry work , , cement , , ppc , , white cement , , fine aggregate , , sand/gravel , , gravel local , , rakhi (fly ash) , , surkhi , , stone dust (in masonry) , , ballast stone/brick (for other than road work) , , 40mm measuring stone (hand-ground grit) (cut pieces 1/11) , , 40mm grit stone (crushed) (boyd's cars 1/11) , , 20mm grit stone (broken with a brusher) , , 12/10/6mm stone brittle (crushed) , , brick ballast , , material for road work (including 5 km lead) , , 63-40 mm crusher broken stone crushed (cut boids 1/11) , , 63-40 mm hand-broken stone aggregate (cut bollards 1/11) , , 90-45 mm hand-broken stone aggregate (cut balls 1/11) , , query ranisha (cut boids 1/6) , , gravel (cut into 1/6" pieces) , , conker (cut voids 1/6) , , binding material (pi 4-6) (cut the blanks 1/6") , , brick (22.5 x 11 x 7.50 cm) , , first class , , ii class , , soling / kharanja / masonry stone , , chinnai berada (rr) , , vinai rada (cr) , , kharanja soling (for floor work up to 15cm height) , , kharanja soling (23cm height for road/kharanja work) , , jodhpuri type stone slabs/arches/slabs (length 2-3', width 10-12", thickness 2.5-3.5") , car jeep (flaky material)(3-4" thick & length and width 1-2") , , ऑटोर (dpc, sill, coping, lintel, tand, almirha etc) , , up to 25mm thickness , , up to 25-40mm thickness , , up to 40-50mm thickness , , up to 50-75mm thickness , , up to 75-100mm thickness , , up to 100-150mm thickness , , flooring / patti patan katla stone , , purse bottoms upto 35mm thick, min. 3 sqft or more area , , kavala 60-75mm painting for patti patan, min. 3 sqft or more area , , unpolished rough kota stone , , for more than 900 years , , 901 to 2300 sq cm , , more than 2300 sq cm , , polished kota stone (one side polished) , , up to 1900 sq cm , , 901 to 2300 years seri uk , , more than 2300 years ago , , marwal stone (makrana adanga 20mm thick) , , from 901 to 2300 square meters , , up to 900 sq. , , 5 more than 2300 sq cm , , marble poison , , marble paver , , marvel stone (rajgar ii quality/est. 20mm thick) , , 1 , , 901 to 2300 sq cm , , up to 2,900 sq. , , 3 more than 2300 berg seni , , stone frame , , single passham ghin 100 x 75 mm. , , eval paitam size 125 x 75 mm, , , stone slabs , up to 1.5 m length, minimum 40mm thick , 1.5 m to 2.40 m length, minimum 50mm thick , , 2.4 m to 3.0 m length, minimum 65mm thick , , 4 above 3.0 m length, minimum 75mm thick , , precast tiles/blocks , , 1 glazed size-30x45 cm , , 2 mosaic size-40mm thick , , 3 vitrified size-60x60 cm , interlock tiles/brick/block for road work , cement interlocking block m-30grade, 60mm thick , , 2 cement interlocking block m-30grade, 80mm thick , cement interlocking block m-30grade, 100mm thick , , single insulated copper conductor single core cable isi marked , , 1.50 sq km , , 2.50 sq mm , , 0.50 years mr. , , 1.00 sq mm , , 4.00 class v.shri , , mm at 6.00 , , local wood and fittings (doors, windows and panes) , , fire , , babut , , factory visit (30 mm bore, bore single pall) , , structural steel , , lox (for yer steel fe 415/500 racement) , , biding vapor 18 table , , iron piers , , konia lohachokor dharivapi/angle aart , , cutter iron wire (size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage , , forged , , iron species (24 bases, 14 pegs) , , cement concrete sky and earth 40 inches thick , , 3mm fat mahas , , color paint , , prize belly , , झिपर (water bound) , , for lime-plastering (aaram/kati) , , prima (for iron/skadi) , , petroleum products , , bibat hsd , , cherished emergency , , bitumen shalila bhoi (25 mm thick) , , plain sheet (len chaha) , , g. i. sadar 22 dev (0.80 mm) , , bi four 24 sharp (0.63 mm) , , ms seat 22 table (0.80 mm) , , nl sheet 24 (0.63mm) , , corrugated mountain , , gi sheet r.b. thick , , aui sheet 22 table (0.80 μ.μ.) , , asbestos cement sheet 6mm(2.5/2.75x1m) , , other posts , pv meter sheet 1 mm thick (coloured/paw

Central Government/Public Sector

CTN :44899903

06 May, 2026 NA

Raigarh - Chhattisgarh

Tender For supply of corrugated sheet

CTN :44915479

27 Apr, 2026 NA

Jaipur - Rajasthan

Tender For supply of foam cushion 16x17x75mm with cover , seat and back for chair cb wa , sliding channel 18inch , wash hand basin white 22x18inch , swr pvc tee 75mm , swr pvc tee 110mm , water cooler connection with brass nut 900mm , gi union 15mm , swr pvc bend 75mm , pvc rawal plug 50mm , glass corner 10 inch , cp grating round 100 inch , gi nipple 20x250mm , cpvc reducer adaptor tee 15x25mm , gi nipple 15x250mm , copper cable 3 core 6sqmm 100 mtrs , plywood bwr 2440x1220x12mm , socket 6 amp 6 pin modular , switch pt 6 amp 2 way modular , pvc waste pipe 32x800mm , plywood bwr 2440x1220x6mm , angle holder , almirah lock , plywood teak face 6mm , steel cona l type 50mm , silica cloth , foam cushion 21x22x4inch with cover , sofa cover21x22x4inch , seat and back for chair verandah , veneer plywood 8x4x4mm , magnetic capture , capacitor 2.5mfd , varnish clear , magic eye brass , roller blind curtain , wind blind width 25mm , plywood bwr 2440x1220x18mm , mdf board8x4x18mm , glass pane 4x4x4mm thick , rexin cloth , toilet mirror 622x422mm , pvc casing 20x16mm 6 ft long , lock for drawer with two key , cp tap 15mm brass , tapestry cloth for foam cushion 21x22x4 inch , steel cupboard handle , gi socket 15mm , gi union 20mm , waste pipe 40x750mm , water cooler connection with brass nut , hdhmr board 18mm , gate valve brass 15mm , gate valve brass 20mm , fiber sheet 4mm 2440x1220mm , switch socket combination 6 amp 5 pin , call bell electric music , batten holder , bed switch 5 amp , cp ext nipple 15x60mm , cp ext nipple 15x40mm , pvc urinal waste pipe 50x800mm , gi elbow 20mm , pvc clipping 19mm , float valve 15mm brass , cpvc elbow 20mm , pvc tee swr 75 m m , cp kitchen mixer 15mm , gi elbow 15mm , gi plug 20mm , gi nipple 20x100mm , touch wood 1 ltr pack , led tube light fitting 2x2 ft , regulator pt , lt heat shrink and termination indoor type , aluminium lug 25sqmm , piano type steel hinges 6ft long , swr pcv tee 110mm , gi tank connection 20mm , plywood 8x4x12mm bwr , plywood 8x4x19mm bwr , plywood 8x4x6mm bwr , swr pvc pipe 110mm 10ft long , paint synthetic enamel black , paint synthetic enamel white , cpvc coupler 32mm , door seal 3ft long , pvc connection 450mm with nut , oil putty , water cooler connection 900mm , water cooler connection 600mm , corrugated waste pipe 800mm , urinal pot , side holder wall to wall 25mm , door stopper single aluminium , swr pvc junction 75mm , cp grating 100mm , cp grating round 100mm , fancy type end cap 25mm , m seal 60 gram

CTN :44908978

22 Apr, 2026 1.91 Lacs

Ludhiana - Punjab

Tender For p/l corrugated g-i sheets along city centre in sbs nagar ludhiana.

CTN :44896282

06 May, 2026 NA

Jhansi - Uttar Pradesh

Tender For providing of paper-based printing services - printing with material; sticker(rectangular); digital,paper-based printing services - printing with material; sticker(rectangular); digital,paper-based printing services - printing with material; brochure a3 folded to a4; digital,paper-based printing services - printing with material; register; offset,paper-based printing services - printing with material; book/booklet; digital,paper-based printing services - printing with material; pamphlet; digital,non paper printing services - area based - flex & banners; digital; pvc (as per iso/iec 7810),paper-based printing services - printing with material; corrugated box printing; offset

CTN :44097811

22 Apr, 2026 NA

Multi City - Andhra Pradesh

Tender For corrigendum : supply of fiber reinforced plastic corrugated translucent sheet and acrylic sheets.

State Government

CTN :44882706

05 May, 2026 NA

Chandrapur - Maharashtra

Tender For supply of fins, scallop bar, ms/ss flats, boiler attachments, soot blower sleeve, chicken wire mesh, corrugated sheets and allied spares for boiler during aoh at unit 8 , cstps chandrapur.

Central Government And Public Sector

CTN :44610848

21 Apr, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of galvanized steel sheets (plain and corrugated) (v2) as per is 277 (q2)

CTN :44882279

21 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - lot no.m.mf-10.exmp.j.04.2026-27.02 description- scrap junk/ kuchra (any ferrous scrap disintegrated through rust or corrosion, tin & galvanized sheets strips & cuttings commode chutes, refuse receptacles), heavily corroded & disintegrated sleepers and pieces etc., all kinds of rusted corroded drums scrap expanded metal and wire mesh. (our offer) corrosion tin and galvanised sheets, strips and cutting rusted gi pipes, rusted and corrugated wire rope, packing strips, chair, revolving chair, fire extinguisher, drum, location box, almirah, expanded metal and all types of torque rod etc., chairs along with or without negligible nf, plastic, rubber & nylon attachment as in the lot . materials are laying from west end of canteen to end of line no. 4 at "j" sector. loading will be commence from south end to north end of "j" sector. before bidding, bidders are requested to inspect the lot. cutting & pressing allowed only the odd shape materials for loading purpose. loading will be done by purchaser's own arrangements.

CTN :44882283

21 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - lot no.m.mf-10.exmp.h.04.2026-27.01 description- scrap junk/ kuchra (any ferrous scrap disintegrated through rust or corrosion, tin & galvanized sheets strips & cuttings commode chutes, refuse receptacles), heavily corroded & disintegrated sleepers and pieces etc., all kinds of rusted corroded drums scrap expanded metal and wire mesh. (our offer) corrosion tin and galvanised sheets, strips and cutting rusted gi pipes, rusted and corrugated wire rope, packing strips, chair, revolving chair, fire extinguisher, drum, location box, almirah, expanded metal and all types of torque rod etc., chairs along with or without negligible nf, plastic, rubber & nylon attachment as in the lot . materials are lying in various places in between "h-2 to upto boundary wall & behind gdn-1. before bidding, bidders are requested to inspect the lot. cutting & pressing allowed only the odd shape materials for loading purpose. loading will be done by purchaser's own arrangements.

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

Central Government And Public Sector