Cross Arms Tenders

State Government

CTN :40129226

12 May, 2025 10.12 Lacs

Thiruvananthapuram - Kerala

Tender For disposal of teak wood pole and teak wood cross arm scraps available under electrical circle ,thiruvananthapuram

corporations/Associations/Others

CTN :40128073

12 May, 2025 15.00 Lacs

Dindigul - Tamil Nadu

Tender For dindigul edc - supply of tapping channel cross arm

corporations/Associations/Others

CTN :40146454

10 May, 2025 NA

Chennai - Tamil Nadu

Tender For supply of 1200 nos. of bird guards suitable for fixing in cross arm of eht transmission towers of 400kv 230kv 110kv feeders in sriperumbudur operation circle.

CTN :40141347

17 May, 2025 NA

East Sikkim - Sikkim

Tender For supply of front wheel brg , body assy throttle , brg ball , u bolt , hub rear wheel , assy cross kit , assy slave cylinder , relay starter solenoid , rectifire , armature , bearing tappered roller , injector kit , alternator holder , brush holder

corporations/Associations/Others

CTN :40116482

08 May, 2025 16.00 Lacs

Mettur - Tamil Nadu

Tender For procurement of lt three phase angle cross arm

Central Government And Public Sector

CTN :40119127

26 Apr, 2025 NA

Dehradune - Uttarakhand

Tender For electric cabling service - 3 phase heavy duty electric wiring xlpe insulated working voltage form 415 v to 11 kv as per is 1554 along with associated items and civil work as per schedule of work attached; copper and aluminium coth conductor material as per schedule of work-1 supply, laying and testing cable xlpe insulated ,screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 sq mm 3 1/2 core. rm 280 2 excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations, or for shafts, wells, cesspits, manholes, pier holes, etc. and not exceeding 10 sqm on plan and getting out in soft /loose soil complete all as specified and as directed cum 60.75 3 returning filling including spreading leveling, watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and as directed. cum 60.22 4 removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed. cum 0.53 5 supply and laying ldpe pipes 50 mm dia with all fitting ,laid in ground for crossing the cables across the road by cutting existing road , under floor ,wall by cutting existing floor and making good the road /floor and wall surface after laying of pipe . rm 270 6 cement concrete 1:3:6 type c-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete for making foundation for mounting flood light /bollard light fitting/finishing of roads/floors etc . cum 4.05 7 m &l for cutting of road /floor surface 30cm girth, up 45 cm width for croosing the pipe line /laying of cable acroos the road all as specified and directed. rm 30 8 s & f distribution boards epoxy powder coated tp & n (vtpn mccb db) 8 way ,415 volts ,fabricated from minimum 1.6 mm thick crca sheet and fixed/ flush to wall and suitable for universal mounting with 250 amps fully insulated copper bus bar for each phase and 02 neutral shrouded bar ,2 earth bar and cable tie for cable management with reversible door for ip-43 db,s protection, suitable for fixing fp mccb 100/125 amps as incomer complete all as specified and directed. note: suitable mccb and outgoing mcbs will be measured separately under relevant items of this schedule each 1 9 s & f mccb ,4 pole 100 a , 415 volts with rupturing capacity 16 ka with thermal-magnetic release and adjustable overload setting of following capacity complete all as directed. each 1 10 s & f bus bar chamber with 4 nos copper busbar 150 amps including mccb 100a 16ka 415 volts each 1 11 s & f sub main wiring with 4x16 sqmm +1 x 10 sqmm run pvc insulated unsheathed frlsh cable 1100 volt grade, with multi stranded copper conductor drawing in concealed pvc conduit not less than 25mm dia complete all as specified and directed. rm 50 12 s & f sub main wiring with 2x4 sqmm +1 x 4 sqmm run pvc insulated unsheathed frlsh cable 1100 volt grade, with multi stranded copper conductor drawing in concealed pvc conduit not less than 25mm dia complete all as specified and directed. rm 200 13 s & f modular rectangular block for mounting,modular switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175mm x 175 mm and 50 mm deep each 25 14 supply and fix modular switch 1 way 16a, 1 module with indicator lamp each 25 15 supply and fix modular socket 6a/16a, 2/3 pin combined 2 module each 25 16 material and labour for earthing with galvanised steel earth plate electrode 60cmx60cmx 6mm thick burried directly in ground (earth pit not less than2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 32 x 6 gi strip by means of nuts,bolts,check nuts & washers of galvanized iron or steel,protected by 15mm bore light grade galvanised iron pipe and connected to

corporations/Associations/Others

CTN :40116488

10 May, 2025 8.50 Lacs

Perambalur - Tamil Nadu

Tender For supply of lt single phase angle cross arm and lt single phase channel cross arm

State Government

CTN :38709840

05 May, 2025 NA

Rajkot - Gujarat

Tender For corrigendum : purchase of 11 kv frp v cross arm with accessories

corporations/Associations/Others

CTN :40128313

06 May, 2025 NA

Pudukkottai - Tamil Nadu

Tender For supply of lt single phase angle cross arm 5000nos.

corporations/Associations/Others

CTN :40109880

05 May, 2025 15.00 Lacs

Surat - Gujarat

Tender For providing, supplying & fixing of playing equipments, outdoorphysical fitness equipments (including one year free maintenance) & maintenance &repairing work of existing physical fitness equipments in various garden in sub zone- 2 &5 in south west(athwa) zone , surat. - air walker / swing walker / sky walker/length 800 mm x width 500 mm x height 1200 mm |40 nb galvanized pipe suspended over 80 nb galvanized up to minimum 40 micron tk.,uniformly poeder coated up to minimum 60 micron tkpipe main frame &foot rest| consisting of hdpe sheet fixed over zinc plate for corrosion resistance.the handle consist of 25 nb galvanized pipe fixed over 80 nb main frame for grip conforming to en1176:2008. all open ends of pipe been closed by gi/hdpe caps for user safety against entrapment, aero rider/ rowing rider |length 800 mm x width 500 mm x height 1200 mmhdpe/lldpe roto molded seat hinged over frame made from 100nb galvanized pipe with powder coating of minimum 60 micron tk. handle support pipelinked to |seat via 25 nb galvanized pipe .the handle support pipe is pivoted over 100 nb support pipe with zinc plated squre tube for corrosion resistance .the handle pipe consists of grip conforming to en1176 :2008 .the handle pipe extended to connect foot grip via 4onb galvanized pipe. the seat rest over the 50 nb pipe fixed over the 100nb main fram pipe. all gi pipes are galvanized up to minimum 40 micron tk for corrosion resistance.all open ends of pipe been closed by gi/hdpe caps for user safety against entrapment, hip twister/ waist twister length 600 mm x width 500 mm x height 1200 mm100 nb galvanized powder coated upto minimum 60 micron tk,pipe main frame with handle pipe fixed at the top. handle pipe consist of rubber grip conforming to en1176:2008 .the rotating disc made from hdpe/lldpe plastic is supported over 25 nb pipe bolted to main frame pipe .all gi pipes are galvanized up to minimum 40 micron tk. for corrosion resistance |all open ends of pipe been closed by gi/hdpe caps for user safety against entrapment., elliptical cross trainer /working trainer/ovate stepper length 800 mm x width 500 mm x height 1350 mmpaired square tube with fo0t rest on each linked to 80nb galvanized main frame pipe with powder coated upto minimum 60 micron tk,the handle pipe consist of 25 nb galvanized rubber grip on top end hinged over 80 nb main fram the handle pipe extended to the square tube on both side with 40 nb galvanized up to minimum 40 micron tk. for corrosion resistance all open ends of pipe been closed by gi/hdpe caps for user safety against entrapment., shoulder spinner/ big arm wheel / shoulder twirl ring dia. min. s00 mm x width 350 mm xheight 1200 mm 25 nb galvanized pipe bend to from ring& spokes consist of 20 nb that connects pipe ring & 40 nb connector pipe fixed to 100 nb main support galvanized pipe with powder coat thickness of minimum 60 microns. all gi pipes are galvanized up tominimum 40 micron tk. for corrosion resistance all open ends of pipe been closed by gi/hdpe caps for user safety against entrapment.handle for rotating thering fixed over the pipe ring, fore arm spinner /small arm wheelring dia. min. 300 mm x width 500 mm x height 1200 mm25 nb galvanized pipe bend to from paired ring & spokes consistof 20 nb that connects pipe ring & 40 nb connector bend pipe fixed to 100 nb main support galvanized pipe with powder coat thickness of |minimum 60 microns. all gi pipes are galvanized up to minimum 40 micron tk. for corrosion resistance .all open ends of pipe been closed by gi/hdpe caps for user safety against entrapment.handle for rotatingthe ring fixed over the pipe ring, leg extensionlength 800 mm x width 700 mm x height 1100 mm hdpe/lldpe seat with backrest fixed over 5onb galvanized pipe fixed over 10onb main supporting pipe the paired 25 nb pipe handle with rubber grip at the end is fixed over 40 nb pipe frame.the paired roller with rubber grip hinged and supported over 100 nb main frame wit

By Cities

By States

By Agencies

By Ownerships

By Sectors