Diversified Electrical Spares And Stores Tenders

Central Government/Public Sector

CTN :45603969

25 Aug, 2026 NA

Chittaranjan - West Bengal

Tender For supply of steel socket for wag-9hc as per specn. clw/ms/3/068 alt-15. [set details attached] [ warranty period: 72 months after the date of delivery ] ]

State Government

CTN :45596388

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply, installation, testing and commissioning of electrical and mechanical equipments for shallow bore tube wells phatak bans,sawar khan, chatta mom gran, lal darwaza in matia mahal constituency ac-21. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for operation of up to 15 hp submersible set, made out of not less than 2 mm thick crca for load bearing members and 1.6 mm for doors of panel, totally enclosed, dust and vermin proof, floor mounted type. the panel size 760 mmx 1360 mm x300 mm and having (1) 63 amp change over- 1 no (2) 63 a tpn mccb -1 no (3) amp meter 0-50 a- 1 no (4) voltmeter 1 no (5) amp & volt meter selector switches-1 set (6) auto-manual + light + control mcb tp 32 amp- 1nos each (7) ct -3nos (8) push button + on/off light 2 nos each (9) 5 kvar shunt capacitor- 1 no (10) aluminium bus bar size 25 mm x 6 mm - 1set (11) 15 hp star delta starter (a) 32 amp power contactor-3 nos (b) overload relay 14-23 a -1 no (c) star delta timer- 1 no ( d) qt timer -24 hours -1 no (e) motor protection relay 200 short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection make:-subtec/protech/ l&t/all djb approved make, s/o pvc insulated flat submersible cable with copper conductor having three core size 2.5 sq mm 1100 volts(100mtr per roll). make- gloster/universal/havells/grandlay/djb approved, s/o g.i pipe 40mm dia medium class with threaded externally on both end socketed 6mtr long. make- jindal/tata., s/o g.i tail piece 40mm dia 600mm long medium class with threaded externally on both end. make- tata/jindal, s/o gi socket 40 mm dia with threaded internally. make: jindal/tata/djb approved, s/o gi elbow with both end having thread, size- 40mm. make: jindal/tata/djb approved, s/o gi reducer having thread on boyh end, size: 50mm to 40mm. make: jindal/tata/djb approved, s/o gi union having thread on both end, size: 40mm. make: jindal/tata/djb approved, s/o ms clamp of 600mm long 12mm thick complete with nut & bolts and washers for holding 40 mm dia pipe i/c bending & shaping etc., supply of ms bore cover 6 mm thick suitable for 100 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 40 mm dia hole in the center., supply of pvc suction hose pipe 50 mm dia 30 mtr long.make-jyoti/isi, installation of submersible pump set with pipe and other accessories, connection of cable, installation of electric panel, grouting of electric panel digging and fixing the same with the help of cc and laying of gi pipe from bore to panel executing minor civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. testing and commissioning of all e&m equipment on no load and full load conditions as per standard and full satisfaction of engineer-in- charge. this is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for opera

Central Government/Public Sector

CTN :45610422

15 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of switch board cabinet for lhb eog/hog lslrd coaches (without da set) to specification rdso/pe/spec/tl/0195 - 2019 rev.0. note: 1. 150 sq.mm crimping sockets 12 nos to spec edts-200 with suitable stud size matching with contactors (hog-a, hog-b, k01 & k03) shall be supplied along with the sbc for connecting feeder cables. 2. location of aerosol based fire suppression system shall be as per rdso ltr no. el/7.1.108/mssbc/main dtd 18-6-2025. 3. packing instruction: pi-115 ver3.0 [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45611419

20 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of crimping socket 'l shaped size 95 sq. mm with hole of 16.5mm dia. suitable for internal fitting of iv coupling socket/plug assembly as per rcf spec edts-105 rev e amdt. 1,2 & 3. note-material should be procured from approved vendors only. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45611420

20 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of crimping socket 'l shaped size 70 sq. mm with hole of 16.5mm dia. suitable for internal fitting of iv coupling socket/plug assembly as per rcf spec edts-105 rev e amdt. 1,2 & 3. note-material should be procured from approved vendors only. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45551057

20 Jun, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of crimping socket 'l shaped size 70 sq. mm with hole of 16.5mm dia. suitable for internal fitting of iv coupling socket/plug assembly as per rcf spec edts-105 rev e amdt. 1,2 & 3. note-material should be procured from approved vendors only. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45551068

20 Jun, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of crimping socket 'l shaped size 95 sq. mm with hole of 16.5mm dia. suitable for internal fitting of iv coupling socket/plug assembly as per rcf spec edts-105 rev e amdt. 1,2 & 3. note-material should be procured from approved vendors only. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45550244

04 Jul, 2026 NA

Vadodara - Gujarat

Tender For corrigendum : supply of set of pipes 15 nb with socket & flanges(complete) drg. no :-wd-96021-s-12 alt-5 or latest ,item no-8 & 9 , spec. no. :- 04 - abr - 02 (rev. 02 of 2019) material of pipes :- stainless steel to astm - a312 schedule 40 s gr. tp 304 (erw) [ warranty period: 36 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45605300

18 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of switch plate assembly complete with polycarbonate cover frame and powder coated steel plate with 1 no. on-off switches and 1 no. 3 pin socket 6a, 250v ac with 2 nos. 1.0 amp. glass fuses with fuse holders. as per item-4. rcf drg no. -cc74247 alt.-g, edml-086, rev-8, table -3. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45397974

24 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For corrigendum : work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all l

By Cities

By States

By Agencies

By Ownerships

By Sectors