Drawing Tenders

State Government

CTN :41706168

25 Sep, 2025 NA

Imphal - Manipur

Tender For supply of colour packing paper 67 by 48 cm , pen stand , laser light , silk ribbon red blue 1 inch , silk ribbon red blue and green 1 by 4 inch , spiral binding paper large fs size , fevicol 100gm tube , ivory sheet 70 by 50 cm , drawing sheet white and mukti colour 70 by 50 cm , paper cutter blade , pulling flower gift all size , cello tape red colour half inch lichiband , cello tape green colour half inch , cello tape blue colour half inch , cello black tape half inch , cello tape transparent half inch , sprial binding wire half inch , golden silver paper glitter sheet , both side tape half inch , both side tape 1 inch , kores glue stick , transparent tape 1 inch , transparent tape 2 inch , wooden pencil , target paper fig 11 , blezer cloth green , flex for drone trg 2 x 2pt 2

Central Government/Public Sector

CTN :41711743

15 Sep, 2025 NA

Chakur - Maharashtra

Tender For supply of stamp pads (q4) , paper weights (q4) , stapler pin / staples (v2) (q4) , sketch pen (v2) (q4) , laminating film rolls (q4) , cartridge (drawing) paper as per is 1848 (part 2) (q4) , clips, paper as per is 5650 (q4)

Central Government/Public Sector

CTN :41693789

15 Sep, 2025 NA

Jalandhar - Punjab

Tender For supply of locking arrangement of uncoupling rod as per drawing no.judw/mech/23-808.

Central Government/Public Sector

CTN :41709212

19 Sep, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of axle box housing [ finish machined ] drawing no t-0-2-602

Central Government/Public Sector

CTN :41709525

17 Nov, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of anchor link drawing no.:- t-0-7-603 , alt (b) & (15) item- 1 & 2 (duly welded)

Central Government/Public Sector

CTN :41694937

18 Sep, 2025 NA

Yamunanagar - Haryana

Tender For supply of liner 75 x 17 x 3 mm for bolster column outer gibs . drawing no: 41, para 5.4.3 of g-95 (rev.1) with amendment no. 5 & spec : wd-21-casnub-22nlb-bogie-93, rev. 2 with amend. no. 6 .& is : 3885, part 1, gr.-iv, hardness 380 - 420 bhn . liner shall be marked as per rdso letter no mw/plng/canb/vendor dated 10/11/23. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41709948

22 Sep, 2025 NA

Yamunanagar - Haryana

Tender For supply of body side stanchion . drawing no :-wd-09034-s-22, alt.10, item no. 4. specn. no. wd-01-crf-12, (rev. 1) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41710000

22 Sep, 2025 NA

Yamunanagar - Haryana

Tender For supply of brake beam hanger modified with bush . drawing no :- sk - 69597, alt. 43, item no. 12 & 13 . [ warranty period: 30 months after the date of delivery]

Central Government/Public Sector

CTN :40446752

06 Sep, 2025 NA

Burnpur - West Bengal

Tender For bid to ras corrigendum : supply of fan assembly - fan assembly for cooling tower. assembly includes 4 nos. of fan blades, hub , accessories such as bolts, fasteners, and washers & clamps required for fitting. fan assembly to be dynamically balanced .moc of fan blades: frp, moc of hub: cast aluminium alloy (lm-6).design of frp blades: twisted and tapered aerofoil precisely laminated in permanent moulds. cooling tower air flow: counter cross flow, motor frame: 200l, motor power (kw/hp): 15/2o motor rpm: 575, fan diameter: 2380 mm, blade length (bl): 1120 mm, blade shoulder (bs): 320 mm, blade tip (bt): 310 mm, hub dia (hd): 300 mm, fan drive: driect motor driven, shaft dia 50 mm; key:14 x 4.5 x 83 (w x d x l) . dimension as per attached drawing named dwg_fan_assembly_wrm_ tm-180 wob , fan assembly for cooling tower. assembly includes 6 nos. of fan blades, hub, accessories such as bolts, fasteners, and washers & clamps required for fitting. fan assembly to be dynamically balanced .moc of fan blades: frp, moc of hub: cast aluminium alloy (lm-6).design of frp blades: twisted and tapered aerofoil precisely laminated in permanent moulds. cooling tower air flow: cross flow, motor frame: 132 m, motor power (kw/hp): 7.5/10 motor rpm: 1455, fan diameter: 1520 mm, blade length (bl): 640 mm, blade shoulder (bs):240 mm, blade tip (bt):166 mm, hub dia (hd):460 mm, fan drive: gear reducer, gear box reduction ratio: 2.71: 1.shaft dia: 46 mm (52 mm with key). dimension as per attached drawing named dwg_fan_assembly_pbs-2_6kf6013. , fan assembly for cooling tower. assembly includes 6 nos. of fan blades, hub, accessories such as bolts, fasteners, and washers & clamps required for fitting. fan assembly to be dynamically balanced .moc of fan blades: frp, moc of hub: cast aluminium alloy (lm-6).design of frp blades: twisted and tapered aerofoil precisely laminated in permanent moulds. cooling tower air flow: cross flow, motor frame: d-160l, motor power (kw/hp): 15/2o motor rpm: 1455, fan diameter: 2420 mm, blade length (bl): 1010 mm, blade shoulder (bs): 324 mm, blade tip (bt): 203 mm, hub dia (hd): 610 mm, fan drive: gear reducer, gear box reduction ratio: 3.27:1. shaft dia: 130 mm. dimension as per attached drawing named dwg_fan_assembly_bof_22202 , fan assembly for cooling tower. assembly includes 6 nos. of fan blades, hub, accessories such as bolts, fasteners, and washers & clamps required for fitting. fan assembly to be dynamically balanced .moc of fan blades: frp, moc of hub: cast aluminium alloy (lm-6).design of frp blades: twisted and tapered aerofoil precisely laminated in permanent moulds. cooling tower air flow: cross flow, motor frame: 132 m, motor power (kw/hp): 7.5/10 motor rpm: 1455, fan diameter: 1450 mm, blade length (bl): mm, blade shoulder (bs): mm, blade tip (bt): mm, hub dia (hd):480 mm, fan drive: belt driven. shaft dia: 68 mm. dimension as per attached drawing named dwg_fan_assembly_bf-5_3872. , fan assembly for cooling tower. assembly includes 4 nos. of fan blades, hub, accessories such as bolts, fasteners, and washers & clamps required for fitting. fan assembly to be dynamically balanced .moc of fan blades: frp, moc of hub: cast aluminium alloy (lm-6).design of frp blades: twisted and tapered aerofoil precisely laminated in permanent moulds. cooling tower air flow: counter cross flow, motor frame: 160l, motor power (kw/hp): 5.5/7.5 hp, motor rpm: 720, fan diameter: 1803.4 mm, blade tip (bt): 8 inch, fan drive driect motor driven. dimension as per attached drawing named dwg_fan_assembly_usm.

State Government

CTN :41670258

18 Sep, 2025 1.77 Lacs

Banaskantha - Gujarat

Tender For providing consultancy services for submission of detail estimate, design, drawing, d.t.s. estimate, dtp for the work of connecting tank by pipeline of deodar and lakhni taluka villages from s.s.s. canal.

By Cities

By States

By Agencies

By Ownerships

By Sectors