Dust System Tenders

State Government

CTN :44824271

21 May, 2026 23.40 Lacs

East Nimar - Madhya Pradesh

Tender For corrigendum : annual contract of operation and maintenance work to carry out flying ash/dust control in lagoon-i and ii of ash dyke area by means of water sprinkling system at sstpp, stage-i, dongalia distt. khandwa. - annual contract of o&m work to carry out flying ash/dust control in lagoon-i & ii of ash dyke area by means of water sprinkling system at sstpp, stage-i, dongalia distt. khandwa. note:- (1) quoted rates shall be excluding gst. the evaluation of prices shall be done on least of the total landed cost to mppgcl i.e. after considering gst rate quoted in the bid.

Central Government/Public Sector

CTN :45023582

18 May, 2026 NA

Bhilai - Chhattisgarh

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; assessment of efficiency of dust extraction systems at sru bhilai and issuance of certificates as per form 21a prescribed under rule 107 of cg factory rul..

Central Government/Public Sector

CTN :45163134

29 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of removal of existing preheating chamber, blasting chamber with fume system, spray painting chamber along with connected accessories and utilities as per tech spec , supply of pre-heating system along with connected accessories as per tech spec , supply of shot blasting system with dust extraction system along with connected accessories as per tech spec , supply of automatic spray painting system with air filtration and ventilation system along with connected accessories as per tech spec , installation, testing and commissioning of pre heating system and connected accessories as per tech spec , installation, testing and commissioning of shot blasting system and connected accessories as per tech spec , installation, testing and commissioning of automatic spray painting system and connected accessories as per tech spec , civil works as per tech spec , spares and consumables as per tech spec

Central Government/Public Sector

CTN :44300352

14 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For bid to ras supply of arrgt. of carbon dust extraction system (ref. techno comm. sheet for details) , fan complete with motor for carbon dust collection system (spare) .

CTN :45044892

13 May, 2026 NA

Panchkula - Haryana

Tender For bid to ras supply of taking down cement plaster of any description on brick walls or concrete surfaces upto 15 mtr height including raking out joints comma hacking for key comma scrubbing down with water etc , m and l rendering 15mm thick rendering cement plaster in cm 1 by 6 over brick work or concrete surface finished even and smooth without using extra cement complete all as specified and as directed , m and l for rendering 5mm thick rendering in cement mortar 1 by 3 on concrete surfaces as in ceiling surface finished fair and smooth without using extra cement , m and l for rendering 15mm thick on fair face of brick or concrete surfaces upto 15m height and providing necessary scaffolding , complete removal of existing treatment by scrapping of walls comma chajjas comma ceilings comma fins comma facias using mechanical means with internal dust extraction system , material and labour for applying a layer of acrylic crack filler paste or similar material which can fill upto 5 mm cracks after widening cracks , providing and applying a layer of wall care putty in two or more coats over new oblique old decorated plastered surface to achieve smooth comma even finish surface suitable as required , material and labour for applying with 1 coat of interior primer over new oblique old which provides exceptional whiteness and opacity and ensures strong adhesion of the top coat. , material and labour for applying 2 coats of interior acrylic emulsion paint over new oblique old wall surface decorated surface having excellent scrub and peel resistance , material and labour for applying with 1 or 2 coats of acrylic waterproof exterior primer coating over new oblique old , material and labour for applying 2 coats of modified acrylic exterior emulsion over new oblique old decorated surface having excellent scrub and peel , providing and applying waterproof wall putty external surface in two or more coats over new oblique old decorated plastered surface to achieve smooth even finish surface , material and labour for applying 2 coats of interior acrylic emulsion paint over new oblique old ceiling surface decorated surface having excellent scrub and peel

Central Government/Public Sector

CTN :44933606

16 May, 2026 28.01 Lacs

Chandrapur - Maharashtra

Tender For corrigendum : supply of spares for afdss system e e - elbow 1 by 2 in part no. se535021 , nozzle conical part no. se53508 , pipe cross-4 way part no. se535123 , 1 by 2 hose assy -800 mm- part no. se5352212 , 1 by 4 ench hose assy 1800mm part no. se5352234 , hose assembly- l bend on one end- part no. se5352262 , fuse 3a part no. se53557 , 3 by 4 coupler part no. se53570 , 3 by 4 in hose assy, 1000mm part no. se5358412 , 1 by 2 hose assy part no. se535842 , 1 by 2 hose assy part no. se535845 , 1 by 2 hose assy. part no. se535846 , 1 by 2 hose assy part no. se535848 , 1 by 2 hose- 2000 mm part no. se535849 , 3 by 4 elbow with check nut part no. se53630 , sensor cable assy . - 30ft - part no. se53729 , dry chemical powder part no. se53753 , tee 3 by 4 bsp part no. se53757 , end of line resistor unit part no. se53799 , dust cap part no. se53835 , sensor cable assembly part no. se53944 , c02 cartridge -300gm- part no. se53994 , nozzle bracket assy. -a part no. se54323 , over ride unit part no. se54453 , bracket for tee 3 by 4 part no. se54486 , rupture disc assy - dcp cylinder part no. se54686 , control unit assy. part no. se57110 , dcp cyl. assy. part no. se57111 , nitrogen cylinder assembly -0.5 lit- part no. se57112 , cable assy.main part no. se57118 , pilot cylinder assembly - gl- part no. se57146 , horn unit. part no. se57392 , cylinder clamp part no. se57491 , dcp cylinder -20kg- part no. se57510 , dcp cylinder mounting bracket part no. se57519 , splicing connector part no. se57539 , hose assly 1 by 2 2500 mm part no. se611282 , hose assly 1 by 2 1600mm part no. se611283 , hose assly 1 by 4 part no. se611291 , hose assly1 by 4 part no. se611294 ) /bid number : gem/2026/b/7426585 * /dated: 18-04-2026 & & / bid document 1 / 35

CTN :45107307

12 May, 2026 6.17 Lacs

Krishna - Andhra Pradesh

Tender For attending various emergency mechanical maintenance works in maint.-i (crushers) sub-divn. /chp (mm)-i&ii/dr.nttps, like replacement of various bearings, plumber blocks and shafts of crushers/vibrating screens and replacement of pullies( de and nde) , bearings and sleeves for belt feeders and dust extraction system of m-1 crushers as and when required during the period from 01-04-2026 or the date of commencement of work to 30-09-2026

CTN :45042168

14 May, 2026 40

Bengaluru - Karnataka

Tender For procurement of cleaning materials for huskuru gp for the year of 2026-27 - coco broom with 5 feet length only natural product to sweep the outdoor only, garbage cover small size, metal type big web stick16 to 24 feet length, small web stick 8 feet, metal dust pan, plastic dust pan, water jug normal size, plastic bucket, system herbicide glyphosate 41% sl, ammonium salt of glyphosate 71 % sg powder, grass cutter or weed cutter 4 stroke engine honda or other brand made company only 1 year motor warranty only without spares running petrol only, grass cutter or weed cutter 2 stroke engine with weed cutter 250meter wire 2sets of blades 1 year service warranty period without spares only china make only no brand petrol and oil running, with push cart set and 3phase honda motor and pump 100 meter flexible hose cable 2no spray guns 250 ltr capacity tank 1 year warranty for motor out of service is free up to 1year spare are chargeable, battery & manual sprayer to wear the back side 16ltr capacity tank no warrant for battery only service warranty 6months without spares only , giantbigfogging machine 1.9 ltr consumption ltr per hr chemical tank 5ltr capacity hand pump 3 to 4 time then cahrgeble battery running 1 year service warranty only with spares and labour charge are extra. to diesel and petrol running only, mini small fogging machine to spray for mesquites no warranty product to use diesel and mini gas can, the composition of malathion tech 5.0% based on 95% chain clay 10% soapstone, toilet cake or odonil fragrance of wash room purpose only, bamboo ladder, mop small cloth to use office table and chairs cleaning purpose only, clip mop set it use moping purpose to office only, apron, sodium hypo chloride, weed control chemical, mask branded, gum boots branded, pvc hand gloves 16 inches, coco broom, soft broom, toilet cleaning acid, malathion oil 5.0% e.c, pesticide (fogging chemical with water mix), fogging chemical (with fuel mix), black phenyl, white scented phenyl, alum crystal, malathion dust 5.0%e.c, bleaching powder 33% chlorine, safety helmets, sanitizer

CTN :45076423

18 May, 2026 40

Bengaluru - Karnataka

Tender For procurement of cleaning materials for sheegehalli gp for the year 2026-27 - coco broom with 5 feet length only natural product to sweep the outdoor only, garbage cover small size, metal type big web stick16 to 24 feet length, small web stick 8 feet, metal dust pan, plastic dust pan, water jug normal size, plastic bucket, system herbicide glyphosate 41% sl, ammonium salt of glyphosate 71 % sg powder, grass cutter or weed cutter 4 stroke engine honda or other brand made company only 1 year motor warranty only without spares running petrol only, grass cutter or weed cutter 2 stroke engine with weed cutter 250meter wire 2sets of blades 1 year service warranty period without spares only china make only no brand petrol and oil running, with push cart set and 3phase honda motor and pump 100 meter flexible hose cable 2no spray guns 250 ltr capacity tank 1 year warranty for motor out of service is free up to 1year spare are chargeable, battery & manual sprayer to wear the back side 16ltr capacity tank no warrant for battery only service warranty 6months without spares only , giantbigfogging machine 1.9 ltr consumption ltr per hr chemical tank 5ltr capacity hand pump 3 to 4 time then cahrgeble battery running 1 year service warranty only with spares and labour charge are extra. to diesel and petrol running only, mini small fogging machine to spray for mesquites no warranty product to use diesel and mini gas can, the composition of malathion tech 5.0% based on 95% chain clay 10% soapstone, toilet cake or odonil fragrance of wash room purpose only, bamboo ladder, mop small cloth to use office table and chairs cleaning purpose only, clip mop set it use moping purpose to office only, apron, sodium hypo chloride, weed control chemical, mask branded, gum boots branded, pvc hand gloves 16 inches, coco broom, soft broom, toilet cleaning acid, malathion oil 5.0% e.c, pesticide (fogging chemical with water mix), fogging chemical (with fuel mix), black phenyl, white scented phenyl, alum crystal, malathion dust 5.0%e.c, bleaching powder 33% chlorine, safety helmets, sanitizer

Central Government/Public Sector

CTN :45110709

15 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,erclips,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: a row bin 1 & 2

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector