Electromechanical Work Tenders

State Government

CTN :45397974

24 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For corrigendum : work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all l

CTN :45602856

27 Jun, 2026 42.95 Lacs

Delhi - Delhi

Tender For repair maintenance of electromechanical service at the residence of hmps lok sabha and rajya sabha at bks marg, dr. b. d. marg and ddu marg, sd-3, ded-201, new delhi.sub head-comprehensive maintenance of epabx system under various location of sub div-3.subwork/packages:comprehensive maintenance of epabx system under various location of sub div-3.

CTN :45592297

24 Jun, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan points (06) in

CTN :45333373

22 Jun, 2026 3.33 Crore

Muzaffarnagar - Uttar Pradesh

Tender For corrigendum : supply of interactive panels with cpu (q2) , professional large format display (v2) (q2) , weighing machine , mill house , fully automatic jaggery production unit , solar panel foundation and all related items , structure of complete plant , bought out for complete plan , erection of mill house and boiling house , hdg set , submersible , fire fighting equipment , hcl kit single , oilfree 15 com , air filter , cylinder c2h2 , regulator c2h2 , hood aas , vacuum hot air oven , digital hot air oven , air circulation fan , microprocessor digital temperature indicator , digital timer , heating mantle , digital muffle furnace , single beam uv , double beam uv , digital photo colorimeter , weighing balance , analytical balance cy , water bath , pid temperature controller , atomic absorption spectrophotometer , gas chromatography , fused silica capillary column , gas purification panel , electromechanical voltage stabilizer , carbon steel cylinder , pressure regulator , glassware , servo candy pillopack wrapping machine , horizontal flow wrapepillopack high speed packaging machine , automatic packing machine , vertical single face paper corrugating machine , corrugated sheet pasting machine , eccentric slotter machine , bar rotary cutting creasing machine , stitching machine , paper reel to sheet cutting machine , flexo graphic printing machine , printing machine , manual jar filling machine , manual pouch sealing machine , manual sticker labelling machine , bag sewing machine , bar coding equipment , bar reader machine , projector , laptop , public address audio system , pantry , desktop with accessorie , tv 45 inch screen , solar panel , bio fertilizer plant , cctv unit for control ) /bid number : gem/2026/b/7564787 * /dated: 26-05-2026 & & / bid document 1 / 42

CTN :45577318

01 Jul, 2026 NA

Raipur - Chhattisgarh

Tender For e –tender for rate contract of consumable items to chhattisgarh medical services corporation ltd rna extraction for covid-19 (manual) vtm kit, salt testing kit alkaline paper electrophoresis, test kit, rapid plasma (rpr) for syphilis testing gluco test strip (2300 ordinary lancet, 2 gluco, meters having 4 pen devices preloaded with depth setting to be supplied free of cost with 2000 strips), rpr kit and syphilis vaccine carrier box rapid plasma regain (rpr) test kit, hepatitis b virus anti hbs elisa quantitative test kit ., mumps virus igm elisa qualitative test kit rubella virus igm elisa qualitative test kit vericella zoster virus-i igm elisa qualitative test kit, cytomegalo virus igm elisa qualitative test kit ., hsv (i and amp; ii) virus igm elisa qualitative test kit japanese encephalitis, virus igm elisa qualitative test kit measles virus igm qualitative, elisa test kit anti hev igm elisa qualitative test kit, rt-pcr kit with h1n1 assay set chikungunya virus igm, elisa qualitative i rota virus antigen elisa test kit, hcv pcr assay kit ready-to-use molecular detection kit for realtime, pcr based detection of hepatitis c virus dna. all necessary reagents optimized for reliable, hcv dna detection and quantitation, including genotypes a– h for in vitro diagnostic use`, hepatitis c virus anti hcv elisa quantitative test kit, hepatities c virustotal ab elisa test kit, anti hav igm elisa qualitative test kit, hbv kit ready-to-use molecular detection kit for real-time pcr based detection of hepatitis b virus dna. all necessary reagents optimized for reliable hbv dna detection and quantitation, including genotypes a–h for in vitro diagnostic use`, dna mini kit the kit should provide silicamembrane- based nucleic acid purification from tissues, swabs, csf, blood, body fluids, or washed cells from urine.the kit should not be based on mechanical homogenization of tissues, rather it should be based on enzymatic lysis of tissues., antibody (igm, igg) based rapid test for diagnosis of covid-19

CTN :45572680

27 Jun, 2026 3.55 Crore

Udhampur - Jammu And Kashmir

Tender For operation, maintenance and repair of electro mechanical components of 1.2 mld sewage treatment plant (stp) along with existing sewerage network and allied works at patnitop, udhampur for 05 (five) years contract no sdj/w/50/2026-27

CTN :45568571

06 Jul, 2026 17.00 Lacs

Srinagar - Jammu And Kashmir

Tender For annual maintenance contract on account of repairs/ replacement to electro- mechanical equipment at five intermediate pumping stations viz konikhan, sadrabal, nigeen, nishat, and shanpora of jklcma

CTN :45578245

09 Jul, 2026 NA

Medak - Telangana

Tender For computerized electro mechanical universal testing machine (utm 200 kn)

State Government

CTN :45571543

20 Jun, 2026 3.02 Lacs

Multi City - Telangana

Tender For operation and maintenance electro mechanical repairs of r 6 lift irrigation scheme located atkm.62.000 on nslbc of settipalem(v), vemulapally(m), nalgonda(d)

State Government

CTN :45574710

23 Jun, 2026 1.16 Lacs

Jummu - Jammu And Kashmir

Tender For electrification or repair to electric system in m and hed complex and allied works day to day maintenance of assets like electrical, electronics gadget, mechanical, plumbing, civil and other related works of m and hed complex bikram chowk jammu

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government