Elevator Tenders

Central Government / Public Sector

CTN :41655912

15 Sep, 2025 NA

Haldia - West Bengal

Tender For custom bid for services - 9040c25d03 annual rate contract for in situ machining of various equipments at haldia refinery-00010 cme10051xx in-situ flange machining of flanges (all types) charges to carry out in situ machining of gasket face flanges (all types of flanges) of heat exchanger/ pipe/ pipe fittings/ column manhole/ reactor manhole/ vessel manhole/ or any other equivalent equipment with skilled manpower & suitable equiment/ machinery. job includes supplying of all types of tools and tackles, jigs and fixtures, lifting arrangements, electrodes, welding equipment, pmi machine, machineries, all consumables, labour etc. and supervision to complete the work in all respects as per drawings and direction of the engineer-in-charge, including area preparation, taking clearance for hot jobs, area cleaning after completion of work, flushing wherever required. the scope includes all necessary jobs (including weld buid up) required to restore the flange face finish as per asme b16.5/ b16.47 as per drawing specifications. the machined surface flatness and/ aarh, as applicable, is to be maintained as per prevailing codes and standards. contractor to identify the flange metallurgy for electrode selection required for weld build up. contractor has to execute weld build up jobs under the inspection of inspection department iocl refinery. after completion of work, the flange has to pass through pressure testing. unit of measurement "inch-dia" denotes inch-dia of the circular / oval flanges. in case of oval flanges, the measurement highest flange dia of a particular flange will be considered., 00020 cme1005101 in-situ flange machining of flanges (all types), 00030 cme1005102 mobilisation and demobilization charges, 00040 1,856,238.- round the clock/ shutdown factor: for shutdown/ breakdown/ emergency jobs, where the jobs are required to be continued round the clock, a multiplication factor of 25% shall be adopted on rfq item 10 comprising of m&i common mechanical, instrumentaion & electrical sor items (item nos. starting with cme, cin & cel)., .

State Government

CTN :41702662

12 Sep, 2025 1.70 Lacs

Agartala - Tripura

Tender For comprehensive annual maintenance contract camc for 01 one no elevator thyssenkrupp make 10 passenger lift machine no 4005 installed at block 1 of new secretariat building capital complex agartala for a period of 06six months

State Government

CTN :41703321

11 Sep, 2025 38.39 Lacs

Mandi - Himachal Pradesh

Tender For supply, installation, testing and commissioning of 1 no. 26 passenger cum stretcher lift with machine room elevator in mch building at sunder nagar distt. mandi hp

State Government

CTN :41365007

08 Sep, 2025 NA

Phaltan - Maharashtra

Tender For supply of installation, commissioning and testing of canning line 0.5 tph - supply of installation, commissioning & testing of canning line 0.5 tph., exhaust box it consists off ss 304-the tunnel type steam exhauster suitable for exhausting of cans-pursed inside the trough to heat the can up to required temperature ss 304 wire mesh type belt-conveyor belt width 500mm-conveyor frame is made in ss304 square pipe 40mm x 40mm-top and bottom cover is provided and length of exhauster 5500mm-one steam header with inlet and drain connection is provided-temperature indicators with control and temperature sensor is provided-variable frequency drive (vfd) is provided for control the speed of belt-geared motor is provided 2 hp-body in 2mm thickness-gear box and motor mounting plate 5mm-belt guides -30mm x 5mm, vertical tank retorts -vessel size -600mm diameter x 900mmh-door manually top opening-capacity 200 bottles-basket loading and unloading manually-size of bottle 46mmx46mmx210mm-automatic digital temperature controller system and pressure control-provide safety valve, air vent valve, pressure gauge and digital temperate gauge-connections water inlet, drain, round retort baskets-ms round crates-diameter -500mm x 400mm, tilting kettle steam jacketed kettle (tilting type)-500 lit equipment consists of:-ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-steam inlet, outlet with steam trap, safety valve, air vent& drain connections-water holding capacity 500 lits-steam requirement 100 kg per batch at 3 kg/cm2-manually tilting arrangement by hand wheel, media preparation kettle- 500 lit -ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-stirrer arrangement with ptfe scrapers, shaft & supporting tripod-fixed speed drive for stirrer shaft-steam inlet, outlet & drain connections-holding capacity 500 lits-electric power requirement = 02 hp for stirrer shaft-steam requirement 100 kg per batch at 3 kg/cm2-body in 5mm thickness, ss tables -ss 304 table top and size 2500mmx600mm x 800mm height-four legs are provided in square tubes and 30x30mm-can size cut out body in 1.5mm, ds 24 seamer -capacity 30-40 high speed cans per minute.-can still type seamer suitable for seaming cans between 100 - 700 dia range.-sturdily built & very robust construction.-complete body of graded cast iron.-seaming operation is fully automatic after the can is placed & pedal is pushed.-the can is stationary while the seaming head with roller rotates, thus seaming the can hermetically.-change parts comprising of seaming rollers, can slide can -guide and seaming chucks for to suit your 401 changeparts [ 850 gm]-electicals:2 hp 930 rpm motor, switchgear, starter, (suitable for operation of 400 v 5% 3 phase 50 cycles supply) pulley, v-belt, cables, conduits and fittings toolkit, gantry from retort to cooling tank - ms structure, hoist lifting crane -500kg double wire rope typecap- 500kgpower-1hp, hoist trolly -trolley cap-500kg-trolley with track for movement, hydraulic trolly-pallet material movement hydraulic trolley, steam line with all valves with aluminum cladding -steam pipeline 40mm and 25mm-valves, bend, flange etc-aluminum cladding, can sterilizer -the tunnel type steam sterilizer suitable for sterilizing of cans-all the bottom of trough one steam connection is provided the steam is directly-pursed inside the trough to heat the can up to required temperature-ss wire type belt is provided for carrying can and width-300 mm-conveyor frame is made in ss square pipe-top and bottom cover is provided and length- 10 feet-one steam header with inlet and drain connection is provided wire mesh opening 5 mm and diameter- 1.6mm, temperature indicates and temperature sensor is provided, geared motor-01 hp, hand can tester -can test

State Government

CTN :41601473

09 Sep, 2025 NA

Kannur - Kerala

Tender For sealed competitive quotations superscribed as "solid block masonry work on machine room of lift at library building, thavakkara campus" are invited from registered competent contractors/firms.

Central Government/Public Sector

CTN :41666743

29 Sep, 2025 NA

Noida - Uttar Pradesh

Tender For procurement of acv auxiliary ard-25 spares - equipment: ac system, make / model:- sutrak carrier / tm 31 hd, primary filter- metal bowl, control cable series 40 (port) 28.0mtr, 4280 mm propeller pitch hose assembly 6. fittings @, 6800 mm propeller pitch hose assembly 5, fuel shut-off cable 24 mtrs, control cable series 40 (stbd) 24.5 mtr, hydraulic fluid low with plug and socket (electrotec), level sensor nmea 2000 3281-0321mm, out board strip 1, flexible exhaust link, standard closed segment, fwd landing skid rubber mount, filter drier, equipment: cpp system, make / model:- ghl uk, st/st rod end rh male m16 gar hw16rr, balanced steering cylinder kit 7065, 3010 mm propeller pitch hose assembly 4, 3220 mm propeller pitch hose assembly 1, long arm riveting plier, line mounted relief valve-rv10 26c3b n 15, taperlock bush aft lift fan (55mm dia) 3525-55, propeller layshaft bearing sleeve nut and tab washer, plumber block lip seal, key 18x10, key 20x12, key 18x11, transmission pulley, 6850 mm propeller pitch hose assembly 9, 4550 mm propeller pitch hose assembly 3, 1570 mm hose assembly 1. fittings @ 90 degree, 1520 mm hose assembly 3. fittings @ 110 degree, 2270 mm propeller pitch hose assembly 2, 1170 mm steering hose assembly 6, 1570 mm steering hose assembly 7, sleeve (h2313 ), eriks tpe r seal (85x120x12) 316 st/st, lock washer(mb13), 22313ek skf bearing, dowty seal 1/2" st/st, equipment:- deck / hull / skirt, sikaflex gun skeleton m301-075, rivet alum 4.8 x 19 mm, pop rivet alum 3.2 x 9.7mm, pop rivet 4.8 x 10mm/ 5 mm big head rivet/ rivets pop 4.8mm (ad66sb ), screw csk posi a2, nut/ nylock nut m6 a2/ m6 nut nylone, washer m6 penny a2/ m6 penny washer, standard craft tool kit, hull emergency repair kit contains: 1xalum sheet 2mm, standard open segments, skirt emergency repair kit, 4130 mm skirt shift assembly 4. bulkhead ram.stbd (h0021807), inboard 4mm cheveron strap, hose assly 3/8"(360 mm skirt shift hose), hose assly 3/8"(370 mm skirt shift hose), metal oval hatch, rapid link 14mm large mouth, hose assly 3/8" (240 mm skirt shift hose assly 7 valve-valve (h0021810), hydraulic cyclinder seal kit skirt system, d shackle 20mm ed621120, strop matrix inboard 5+f68mm (red), strop matrix inboard 4mm (red), round inspection hatch/ plastic round hatch, strop matrix outboard 4mm (black), rope strop 7/8 870mm, cold skirt bonding agent, strip shackle 8mm, d shackle 8mm, nut cap nylon 1/2" 05500 13cn, bridge plate, strop matrix outboard 5mm (black), vetus ufo stainless deck ventilator, skirt shift matrix assembaly, outer loop, inner loop, rivet alum pop, washer m8, m10 washer form b, rudder, elevator blade, 2830 mm skirt hose assembly 1. bulkhead - ram. port(h0021804), starboard inboard rudder, tie rod long, tie rod feedback, tie rod short, temperature switch, rod end m 12 (sme 45.12), rod end m8, inboard 5mm chevron strop, hose clamp, 8mm key pin shackle, 8mm bow shackle, equipment: lift fan, make / model :- ghl uk, shaft lift fan, fwd lift fan bearing, taper lock bush3020x50, washer spring m12, screw m12x30, taper lock bush 75 mm bore, bolt m8 x 25 hex hd a4, drive belt 14mgt-1610, aft lift fan bearing, lift fan shaft seals - aft, equipment:- steering, make / model:- accu steer hm-260, emergency steering hydropack, equipment:- electrical, make / model:- accu steer hm-260, strip led, orange beacon, light stern with assy/3541002 24v, light starboard side 24v 3541002(green), spare bulb, bulb (flap switch)en507026, spare bulb 02-90400006, essential supply isolator 24 v dc coil albright sw80-1907, canbus cable can-201

State Government

CTN :41657023

16 Sep, 2025 6.99 Lacs

Dahod - Gujarat

Tender For item no. 1: deepening tank in all type of soil with yellow, sandy, gravelly soil including wet and slushy condition of soil including soft murrum and hard murrum by machinery including conveying and spreading excavetaed stuff as & where directed with lead up to 1.00 km and all lift etc. complete. (sorp no. 11) item.no. e-28.item no. 2: quaring tranporting and spreding selected materials from boro area for rising of inbakment work in homoginius layers of uniform layers of specified thickness as dirested including dressing, breking, clods and rolling ect. requisite moisture contant to required dry density with rolar of shotable type and watering at omc for lead up to 1.0. km and all lift etc complete. (s.o.r. page no.1)item no. 3: excavation for foundation in all sortsof soil including yellow snandy gravelly soil, soft & hard murrum etc. in dry condition including deposiling the excavated stuff iniform layer in banks or and whrere directed etc. complete for lead up to 500 m and all lift. (by machinery) (sorp no.26) item.no- s-1 (a) (b)a.item no. 4: providing and laying in position nominal mix" cement concrete using cement, sand and crushed aggregate by mass and machine mix for c.c./r.c.c. work incl. necessary formworks centering, scaffolding, compaction by vibrator, curing as directed with all lead & etc. complete without dewatering and excluding cost steel reinforcement.(c) c.c. nominal mix m-15 and msa-20 mm. (sorp no.27) item.no- s-3 (a) (c).1item no. 5: providing and laying dray rubble pitching of varios thickness required grade including triming of earth work and hand packing the interstices with spauls, filling earth in interstices paneling complete for all leads and lifts.item no- s-21a.(sorp. no. 32)230mm thick.item no. 6: providing and fixing marble plate of 2.54 cm thick including engraving and fillinf ead fo letters as (sorp no. 34) item no- s-35. directed.

State Government

CTN :41657025

16 Sep, 2025 7.47 Lacs

Dahod - Gujarat

Tender For item no. 1: deepening tank in all type of soil with yellow, sandy, gravelly soil including wet and slushy condition of soil including soft murrum and hard murrum by machinery including conveying and spreading excavetaed stuff as & where directed with lead up to 1.00 km and all lift etc. complete. (sorp no. 11) item.no. e-28.item no. 2: quaring tranporting and spreding selected materials from boro area for rising of inbakment work in homoginius layers of uniform layers of specified thickness as dirested including dressing, breking, clods and rolling ect. requisite moisture contant to required dry density with rolar of shotable type and watering at omc for lead up to 1.0. km and all lift etc complete. (s.o.r. page no.1)item no. 3: excavation for foundation in all sorts of soil including yellow snandy gravelly soil, soft & hard murrum etc. in dry condition including deposiling the excavated stuff iniform layer in banks or and whrere directed etc. complete for lead up to 500 m and all lift. (by machinery) (sorp no.26) item.no- s-1 (a) (b)a.item no. 4: providing and laying in position nominal mix" cement concrete using cement, sand and crushed aggregate by mass and machine mix for c.c./r.c.c. work incl. necessary formworks centering, scaffolding, compaction by vibrator, curing as directed with all lead & etc. complete without dewatering and excluding cost steel reinforcement.(c) c.c. nominal mix m-15 and msa-20 mm. (sorp no.27) item.no-s-3 (a) (c).1item no. 5: providing and laying dray rubblepitching of varios thickness required grade including triming of earth work and hand packing the interstices with spauls, filling earth in interstices paneling complete for all leads and lifts.(sorp. no. 32)item no- s-21a. 230mm thick.item no. 6: providing and fixing marble plate of 2.54 cm thick including engraving and fillinf ead fo letters as (sorp no. 34) item no- s-35. directed.

State Government

CTN :41657026

16 Sep, 2025 8.30 Lacs

Dahod - Gujarat

Tender For item no. 1: deepening tank in all type of soil with yellow, sandy, gravelly soil including wet and slushy condition of soil including soft murrum and hard murrum by machinery including conveying and spreading excavetaed stuff as & where directed with lead up to 1.00 km and all lift etc. complete. (sorp no. 11) item.no. e-28.item no. 2: quaring tranporting and spredingselected materials from boro area for rising of inbakment work in homoginius layers of uniform layers of specified thickness as dirested including dressing, breking, clods and rolling ect. requisite moisture contant to required dry density with rolar of shotable type and watering at omc for lead up to 1.0. km and all lift etc complete. (s.o.r. page no.1)item no. 3: excavation for foundation in all sorts of soil including yellow snandy gravelly soil, soft & hard murrum etc. in dry condition including deposiling the excavated stuff iniform layer in banks or and whrere directed etc. complete for lead up to 500 m and all lift. (by machinery) (sorp no.26) item.no- s-1 (a) (b)a.item no. 4: providing and laying in positionnominal mix" cement concrete using cement, sand and crushed aggregate by mass and machine mix for c.c./r.c.c. work incl. necessary formworks centering, scaffolding, compaction by vibrator, curing as directed with all lead & etc. complete without dewatering and excluding cost steel reinforcement.(c) c.c. nominal mix m-15 and msa-20 mm. (sorp no.27) item.no- s-3 (a) (c).1item no. 5: providing and laying dray rubblepitching of varios thickness required grade including triming of earth work and hand packing the interstices with spauls, filling earth in interstices paneling complete for all leads and lifts. (sorp no. 32)item no- s-21a.230mm thick.item no. 6: providing and fixing marble plate of 2.54 cm thick including engraving and fillinf ead fo letters as (sorp no. 34) item no- s-35. directed.

State Government

CTN :41657029

16 Sep, 2025 11.28 Lacs

Dahod - Gujarat

Tender For item no. 1: excavation in all sort of strata andformation incl. depositing the unuseful excavated stuff as and where directed incl sorting and stacking useful materials as dirested upto 200 mt lead and all lift etc. complete incl. dewatering. item no. 2 prov. & laying in position" nominal mix" cement concrete using cement, sand, & h.b. metal by mass and machine mix for pcc including necessary formworks, compaction, rming, curing as directed with all lead and lift ect complete.for foundation concrete / other generalpurposeconcrete (1:3:6) metal size -63 mm (cement level 220 kg/cum)item no. 3: providing, cutting, bending,binding and fixing in position as per drawing tmt bar, reinforsment for r.c.c. work and anchor bars incl cost of black annealed 16 to 18 bwg m.s. wireetc. complete with all lead and lift. (b) fe-500.item no. 4: prov. & laying in position cementconcrete using cement, sand and crushed metal coase aggregate by mass and machine mix for pcc/rcc including necessary formworks compaction by vibrater, curing as directed with all lead & lift etc complete. (excluding cost of steel) for, body wall, apron, training wall, side wall, splay wall, ket wall, cut of wall etc.4e) "nominal mix" concrete grade 1:2: and msa-40 mm1item no. 5: prov. & laying uncoursed rubblemasonry in cement and sand mortar by mass and machine mixing incl use of header and bond stones etc and incl scaffolding and finishing to required shape and batter end steps etc as per drawing and racking out the joints, curing etc complete in all respect. for lead lift.a) in c.m. 1:5 for foundation and super structure.b) in c.m. 1:3 for super structure.item no. 6: cement plaster 10 mm thick in single coat to cc/rcc work and brick work on fair side in c.m. 1:3 including finishing, curing, scaffolding, etc. complete.item no. 7: providing and fixing marble plate of 2.54 cm thick including engraving and fillinf ead fo letters as directed.(sorp no. 34) item no- s-35.

By Cities

By States

By Agencies

By Ownerships

By Sectors