Get complete information related to latest Epoxy Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Epoxy Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Epoxy Tenders.
Tender For empanelment of agencies for supply of different laboratory instruments for various water testing laboratories under jal jeevan mission, assam - ion meter with electrode and accessories for fluoride & nitratemeter: ph/ion/ mv-redox-orp/ temperature benchtop meter with electrode for testing both fluoride & nitrate separately in water samples. technical specification: ph range: -2.000 to 20.000 resolution 0.1, 0.01, 0.001 accuracy 0.002 ph + 1 lsd calibration points up to 5 buffer sets: usa/ nist/ din/ custom orp range 2000.0 mv rel. mv range 2000.0 mv accuracy 0.2 mv resolution 0.1 mv ion concentration 0.001 to 19999 ppm resolution up to 3 digits relative accuracy 0.5 % full scale (monovalent) and 1 % full scale (divalent) calibration points up to 8 temperature range 0 to 100 c, 32 to 212 f resolution 0.1 accuracy 0.3 c/ 0.5 f compensation: auromatic temperature correction other requirement: auto buffer recognition, memory 500 with time and date stamp rs 232 alarm for calibration due & out of range alurm auto logging function., fluoride electrode of ion metersame make that of the ion meter, nitrate electrode of ion metersame make that of the ion meter, manifold filtration assembly (to be used for micobiological test)* sturdy and easy to clean ss filtration assembly with funnel, manifold unit, air vent filter and vaccum pump ready to be used for mictobiological testing * specification: # funnel with inbuilt clamp: made of ss 316, capacity: 300 ml, ss filter support base, ss support screan: 47 mm, made of ss 316l; filtration area 9.6 cm2; silicon stopper: size 8, with silicon lid and silicon o ring. # filtration manifold: 3 place manifold, made of ss 316, valves made of ptee, connection 12 mm; suitable for both pp and ss funnel with rubber stopper fittings. # vacuum pump: oil free, piston powered, suitable to be used with 3 possition manifold; max flow rate: 34 l/ min; vaccum stage: double. max vaccum: 100 mbar. the vaccum pump should also have a vacuum suction bottle to protect the pumps componennt by preventing liquid or solid material from entering the pump during filtration process., voltage stabilizer (3 phase)# capacity- 3 kva # input voltage range: 295 v - 465 v normal range # output voltage range 380 v / 400 v / 415 v # output regulation: 1 %; # output settability: 380 v - 420 v; # frequency: 47 hz - 53 hz; correction rate: 70 v/ sec; # aircooled servo stabilizer, three phase., heating mantle (single station) should have safety cut off with precise heating for boiling, evaporation, distillation or extraction process technial specification: flask capacity 250 ml, working temp range: ambiant + 5 to 350 degree celcius. accuracy: 1.0 degree celcius, display: led display with temperature, time; construction material: ms; power consumption : 150 w, semi automatic digestor for cod analysis with all assssories material of construction epoxy painted with chemical resistant coating; temperature range ambient to 450 deg c # stability of temperature 0.5 deg c # temperature calibration - automatic; selectable ramp: upto 4 per program; digestion time range: 1 to 999 minutes; time selection: 1 minutes steps; countdown: digital readout; heating places - 6 possition; size of tubes: 250 ml test tubes (42 mm); power 1000 w; number of programmable methods 20 numbers. # the thermal digestion unit should have high thermal homogeneity # the setup should have small footprint., digital thermometer with probe# mini lcd thermometer # type: digital, # sensor cable length: 1 meter water proof probe # batteries: 2 x batteries should be included, # temperature range: - 50 - 110 oc, # temperature measurement accuracy: 1 0c, micropippete stand#self-standing holder accommodates most major brands of pipettes. #material: pmma, # capacity: 5 pipptes/stand, conical flask draining rack#material: acrylonitrile-butadiene-styrene/polycarbonate, # no. of pegs: 20
Tender For gc section:- repair work like desilting, epoxy grouting, flooring , inspection steps, chequered plate etc of various major bridges(i.e. bridge no.34a, 39, 42a, 71, 116, 150, 151, 160, 167, 187, 202, 332 & 416) in the jurisdiction of sr.den/2/dhn.
Tender For supply of epoxy compound for general purpose.ts as undertype =two component consisting resin & hardner.mixing ratio =resin & hardner 1:1 vol.viscosity of resin =putty consistency.viscosity of hardner =putty consistency.mixing time =2-3 minutes.physical state of mixed mass =fine smooth putty consistency.curing time =30/40 minutes at 30 degree c.hardness =70-80 shores
Tender For supply of thinner for epoxy paints (bhel),thinner for epoxy paints (bhel),epoxy based zinc phosphate primer (two-pack) as per is 13238,epoxy based zinc phosphate primer (two-pack) as per is 13238,epoxy based zinc phosphate primer (two-pack) as per is 13238,epoxy based zinc phosphate primer (two-pack) as per is 13238
Tender For open tender document for e-procurement of laboratory equipment (ndt, epoxy, thermoplastic, sign board and sheeting, metal beam crash barriers) for material testing laboratory of iahe - ndt, pull-off testpull-off tester unit; battery pack; battery charger with usb-cable; test disc aluminum 50mm/m10 100 nos.; draw bolt m10; torx screwdriver; software, operating instructions, certificate of conformity and carrying case., reinforcement corrosion (half-cell potential measurements apparatus), homogeneity & quality test (ultrasonic pulse velocity apparatus), cover meter test(full set of equipments), epoxy, viscosity testfull set of equipment, pot lifefull set of equipment, bond strength test (epoxy)full set of equipment, shear strengthfull set of equipment, thermoplastic, luminance test night visibility (rl) and day visibility (qd), retro reflectivity of road markingsretroreflectometer for road markings, thickness test for thermo plastic road markings ( 2 in nos.), sign board and sheeting, co-efficient of retro-reflection test of retro reflective sheeting, retro-reflective sign & boards sheetingretro reflectometer for signages, metal beam crash barriers, thickness gauge test ( 2 in nos.)
Tender For supply of procurement of spares of ece make ocbs c c - cartridge fuse 2a part no.bd5412 , hv fuse part no.bd4104 , epoxy resin cast current transformer rat part no.ba1132 , fixed contact assembly 400a part no.bd4510 , arc control pot separator part no.ek6050876 , insulated bolt small part no.pd8296 , carriage assly part no.bd5550 , epoxy ocb bushing 3by4 inches 400 630a part no.pd8195 , moving contact assembly part no.bd5551 , auxiliary plug assly. part no.bd4851 , guide pin big part no.pd4043 , rotatry switch complete with link and fixi part no.bd9191 , operating mechanism complete set part no.bd4911 , cam lever no.1 assy. part no.bd4915 , push trip assy. part no.bd4920 , rod holder assembly part no.bd4921 , trip lever part no.pd7069 , shunt trip coil assembly part no.1650ts , isolator spout assly. part no.bc9976 , auxiliary socket assembly 12 nos socket part no.bd5250 , earth leakage relay with digital leakage part no.ea6610c , earth leakage relay with current setting part no.ea6620 , master trip relay part no.ea6573 , idmt relay complete with 2 over current part no.ea6561 , complete wiring set for ocb ece part no.bd5988 , power pack unit 110v dc part no.bd5999 , amper meter selector switch part no.srp136ma , voltmeter 3.3 kv 110 v digital part no.dgv3300 , amper meter part no.dgm400 , potential transformer 3.3kv 110v part no.bd4102 , earthing jaw contract part no.pd4049 , copper connection r phase part no.bd8889r , copper connection y phase. part no.bd8889y , copper connection b phase. part no.bd8889b , trolley complete with all accessories part no.bd8268 , testing kit complete earth tester part no.bd8596 , indicating lamp fitting red green part no.bd5410 , epoxy resin cast current transfornmer ra part no.ba1133 , epoxy resin cast current transformer r part no.ba1134 , auxiliaryplug and socket assembly complete s part no.bd4850
Tender For (1) improvement of rub-297,306 and 322 under the jurisdiction of aden/cwa by providing cover shed, construction of sump,drain,epoxy grouting, cement grouting etc. (2) improvement of ci rub-182 and 206 under the jurisdiction of aden/cwa by providing cover shed, construction of sump,drain,epoxy grouting, cement grouting etc.
Tender For (1) improvement of rub 226,266 and 270 under the jurisdiction of aden/cwa by providing cover shed, construction of sump,drain,epoxy grouting,cement grouting etc. (2) improvement of rub 332,315 and 346 under the jurisdiction of aden/cwa by providing cover shed, construction of sump,drain,epoxy grouting,cement grouting etc.