Excavator Tenders

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement

CTN :44866823

01 Jun, 2026 4.61 Crore

Bhopal - Madhya Pradesh

Tender For corrigendum : hiring of excavator, jcb, dumper and other allied machinery on rental basis for various bhopal municipal works at bhopal - selection of bidders for hiring of excavator, jcb, dumper and other allied machinery on rental basis for various bhopal municipal works at bhopal

State Government

CTN :45257806

26 May, 2026 1.67 Lacs

Karnal - Haryana

Tender For amtc of ephs in sector 8 ue karnal repair of water supply and leakage repair cid joints including all type of tools fuel excavation machinery complete in all respect ac rs 1.67 lacs

corporations/Associations/Others

CTN :45034145

27 May, 2026 43.16 Lacs

Jhansi - Uttar Pradesh

Tender For corrigendum : providing of construction of drain for 2x210 mw ash water recirculation system at ptpp, parichha. - engaging jcb on hire bases including hire fuel driver helper etc. complete. , clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. , demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of material within 50 metres lead as per direction of engineer-in-charge in lime mortar , earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. , filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. , providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - all work up to plinth level : 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) , "centering and shuttering including strutting, propping etc. and removal of form for : suspended floors, roofs, landings, balconies and access platform" , steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.thermo-mechanically treated bars , random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : cement mortar 1:6 (1 cement : 6 coarse sand) , brick work with fly ash (non modular) bricks of class designation 7.5 in foundation and plinth incement mortar 1:6 (1 cement : 6 coarse sand) , 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) , supplying and filling in plinth with jamuna sand under floors, including watering, ramming, consolidating and dressing complete. , "hire charges of pump set of capacity 4000 litres/hour for dewatering which include cost of services of operating staff, cost of lubricating oil, diesel / petrol/ kerosene oil , other consumables for running the plant and machinery. the hire charges of plant machinery on per day basis are for single shift of eight working hours." , providing and laying non pressure np-4 class (heavy duty) r.c.c. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 900 mm dia rcc pipes.

CTN :45248374

06 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of metallic - sale of scrap material arising out of hemm

CTN :45248662

09 Jun, 2026 NA

Multi City - Jharkhand

Tender For auction sale of metallic - hemm and iron & steel scrap from rajrappa, piparwar, barka sayal, dhori, kuju & hazaribagh areas of ccl

CTN :44964160

20 May, 2026 18.38 Lacs

Bhadradri Kothagudem - Telangana

Tender For corrigendum : roof bolts, m.s. bolts & nuts , rivets, washers & screws , , dog nails , , fish plates, nuts & bolts for fish plates , , belt jointing pins , , cable hooks and signal hooks , , belt conveyor rollers , , belt sections , , resin capsules , , cement capsules , , gi canisters , , blasting gallery - spacers , , radiator repairs , , repairs and rewinding of motors of ac & dc , , repairs / rewinding of transformers (welding/lighting/power) , , gl wire , , wire mesh for longwall salvage , , manufacturing of supply of electrical coils for , , i) ac motors up to 6.6kv grade , , li) transformer coils up to 33 kv grade , , repairs of rotors for electric motor , , lighting cable , , steel chock manufacturing , , house wiring , , all types of fan repairs , , shovel bucket welding , , repairs of pumps , , couplings manufacturing , , special steel and alloy castings , , (tooth points, track pads, mn steel casting) , , manufacturing of fly ash bricks (not to be manufactured at stores site. it shall be at their own site) , , manufacturing of pump components (spares) , , transformer oil filtration , , reconditioning of drill bits an drill rods. , , vulcanizing the old training cable sof drill machines, sdls, lhds etc (work should be carried out at the respective mine premises. , , manufacturing of earth clamps, g.i.flats, g.i.bolts and nuts. , , crimping of hydraulic hoses. , , repairs to hydraulic pumps, motors, control valves and other related components. , , refurbishing of lt & ht switches with oem spares including testing. , , manufacturing/repairs of slip rings & d-contacts. , , furniture repairs i.e. cane chairs, tables, almirahs etc. , , repairs to wet grinders, water purifiers and water coolers , , manufacturing of coupling bolts of all sizes , , fabrication of oht line components like cross arms, clamps, stay wires, cross brassings, base plates etc. , , manufacturing of haulage rope drum rollers. , , all sizes of ventilation doors. , , safety boards designing/stickering/painting with retro-reflective radium papers/paint on hemm/ radium stickering in underground & surface, radium boards, safety boards & radium jackets. , , fabrication of lighting & cable cross over towers , , maintenance & repairs of air conditioners on hemm , , painting work in underground and on surface , , fabrication and erection of ms structural works like gantry, bunker etc. , , tailoring works at hospitals & area workshops , , manufacturing of hume pipes , , clay pills manufacturing , , maintenance of pmts/lighting transformers/power transformers & sub-stations , , erection /renovation of residential/pmts/sb-station earth pits (conventional type /chemical type). , , testing of all protective relays & mprs , , tub assembling/repairing of coal tubs in mines. , , cl casting works like ci pulley, tub wheels , , outsourcing works in mines, like masonary walls construction, surface material loading, cleaning and dusting in underground etc. , , all types of computer software installation, antivirus, hardware and network installation. , , cc cameras installation and repairs.

Central Government/Public Sector

CTN :45189045

25 May, 2026 16.29 Lacs

Angul - Odisha

Tender For offloading work towards removal, dismantling, assembling ,patch repairing if required and fitment of 35x65-33(42pr), 23.5x25(20pr), 18x25(12pr) and 18x25(32pr) size otr tyre of hemms as and when required basis for a total period of 360 day

CTN :45130900

16 May, 2026 1.41 Lacs

Agra - Uttar Pradesh

Tender For corrigendum : escorts digmax excavator-cum-backhoe loader work pertaining to unit no. up80ag0810, including front wheel bearings (large and small), split pins, hub seals and sleeves, stub axle with nut, boom shims, nuts and bolts, loader teeth, loader bucket

Central Government/Public Sector

CTN :45135747

22 May, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 2 )items as given below ,[1] operation of plant garage traxcavator 10585.000 md,[2] operation of plant garage traxcavator 10585.000 md

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector