Get complete information related to latest F R P Materials Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic F R P Materials Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding F R P Materials Tenders.
Tender For providing and fixing of acid alkali resistance tiles ppg and frp lining work in various main plant and other structures at kaps 3 and 4 plant site
Tender For providing and fixing of open / green gym item in palasgaon village under kuchana housing complex of majri area. - earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil., supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete., providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:3:6 (1 cement : 3 coarse sand (zone-iii) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:1 :3 (1 cement:1 coarse sand (zone-iii) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources), providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of m - 30 grade made of c&d waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineer-in-charge., providing and fixing pommel horse size 2200 x 710 x 610 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. round plate of 6 to 8 mm thickness. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing / pole cap made of hdpe/frp material and seat structure made of m.s sheet laminated by frp of 3 to 4 mm thickness and panit by powder coated ( 80 to 90 micron). all complete job as per the instruction of engineer in charge., providing and fixing sky walker size 1700 x 710 x 1700 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. round plate of 6 to 8 mm thickness. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing ball bearing (skf) ,bearing / pole cap made of hdpe/frp material and foot rest structure made of m.s sheet laminated by frp of 3 to 4 mm thickness and panit by powder coated ( 80 to 90 micron). all complete job as per the instruction of engineer in charge., providing and fixing single shoulder press size 1200 x 760 x 1670 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. round plate of 6 to 8 mm thickness. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing ball bearing (skf) ,bearing / pole cap made of hdpe/frp material and seat structure made of m.s sheet laminated by frp of 3 to 4 mm thickness and panit by powder coated ( 80 to 90 micron). all complete job as per the instruction of engineer in charge., providing and fixing seating standing twister size 1820 x 610 x 1520 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. round plate of 6 to 8 mm thickness. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing ball bearing (skf) ,bearing / pole cap made of hdpe/frp material and twister plate structure made of m.s sheet / frp of 3 to 4 mm thickness and panit by powder coated ( 80 to 90 micron). all complete job as per the instruction of engineer in charge., providing and fixing outdoor traidmill size 1200 x 610 x 1220 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. plate. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing ball bearing (skf) ,bea
Tender For supply of supply of fd wss water storage tk 12 kl 03 nos d d - cement bag 43 grade opc in polythene bags weighing 50 kgs , sand coarse , hard core of broken stone aggregate of size 45 to 63 mm , crushed stone aggregate 20 mm graded , pre cast acc blocks type c1 1 ratio 3 ratio 6 using 20 mm aggregate of size 0 point 40 x 0 point 20 x 0 point 20 mtr , 5mm thick ms sheet , angle iron 65 x 65 x 6 mm , frp tanks 2 x 6000 ltrs capacity for each asset rotational moulded frp underground water storage tank , columns square hollow steel shs sections of size 80mm x 80mm x 4mm and 2800 mm long , trusses including gable end trusses shall be provided using rectangular hollow sections rhs of size 50mm x 25mm x 4mm and 2400mm long , purlins rectangular hollow steel rhs section of 50mm x 25mm x 4mm and 6800 mm long purlins provided on the trusses , side bracings 03 nos of side bracing shall be made using rectangular hollow steel section of size 60 x 40 x 3mm and 3400 mm long as a horizontal support , roof sheet 0 point 60 mm thick pre painted galvalume roof sheet in approved colour should be provided for roof and to cover one side of temp shed , ms sheet of 5 mm thick to cover surface of tank and making 1m x 1m opening cover of ug frp water tank , angle iron of size 65 x 65 x 6mm for making a frame for fixing of ms cover on the ug tank and opening of ug frp water tank and horizontal beam support to ms plate , ms handle of size 450 long and 50 mm thick 4 nos per cover welded with the ms sheet for opening of tank cover , ms hinges should be provided and fixed with ms sheet and angle iron frame , self tapping screw 4 inch , self tapping screw 3 inch , pan motor tasala 18 inch dia , showel with wooden handle , wire mess for seving sand 8 x 5 feet , trowels as per isi mark , water level pipe 4mm and 15 mtr long , sprit level , plum bob steel , nylon mason thread 100 mtr long , measuring tape 05 mtr retractable grade ai 16 , safety helmet , gum boot , hand gloves rubber , drilling machine portable , steel cutter circular saw , cutting blade 4 feet steel , cutting blade 14 feet steel , hexa blade 350 mm long isi 1st quality , axes picks 03 kg head with handle , welding rod , welding goggles , welding gloves
Tender For corrigendum : supply of frp window assembly (2'-0" wide). drawing no.: rdso's drg. no. sketch-96070, alt.1. material specification: as per drawing, conforming to rdso's specification no. rdso/2007/cg-02 (rev. 1 / feb. 2008 with amend. no. 3 / feb.19). colour : off white. [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : purchase of multipurpose frp section rod as per ugvcl specification - supply of afiberglass reinforced plastic (frp) sectional rodwith a universal head (toothed) with a thumbscrewand rain hoods, as per technical specifications., supply of aluminum headfor fuse operation as per technical specifications., supply of discharge headwith spring action with earthing clamp /crocodile clipand pvc copper cable as per technicalspecifications., supply of epoxy head forremoving creepers as per technical specifications., supply of stainless-steelknife head with a hook for tree trimming as pertechnical specifications., supply of afiberglass reinforced plastic (frp) sectional rodwith a universal head (toothed) with a thumbscrewand rain hoods, as per technical specifications., supply of aluminum headfor fuse operation as per technical specifications., supply of discharge headwith spring action with earthing clamp /crocodile clipand pvc copper cable as per technicalspecifications., supply of epoxy head forremoving creepers as per technical specifications., supply of stainless-steelknife head with a hook for tree trimming as pertechnical specifications., supply of afiberglass reinforced plastic (frp) sectional rodwith a universal head (toothed) with a thumbscrewand rain hoods, as per technical specifications., supply of aluminum headfor fuse operation as per technical specifications., supply of discharge headwith spring action with earthing clamp /crocodile clipand pvc copper cable as per technicalspecifications., supply of epoxy head forremoving creepers as per technical specifications., supply of stainless-steelknife head with a hook for tree trimming as pertechnical specifications., supply of afiberglass reinforced plastic (frp) sectional rodwith a universal head (toothed) with a thumbscrewand rain hoods, as per technical specifications., supply of aluminum headfor fuse operation as per technical specifications., supply of discharge headwith spring action with earthing clamp /crocodile clipand pvc copper cable as per technicalspecifications., supply of epoxy head forremoving creepers as per technical specifications., supply of stainless-steelknife head with a hook for tree trimming as pertechnical specifications.
Tender For supply of final roof element, as per drawing: lr10161 alt 'nil', packing instruction: return able & re-usable metallic pallet item should be supplied in returnable & re-usable palle t made of steel. the design of the pallet should be : " water and fire proof. " rust free. " having good strength to weight ratio. " suitable for stacking in several layers, comp atible with each other when stacked. " able to withstand the rough handling of comm on logistic systems such as fork lifter, cranes etc. " able to facilitate the storing, handling and unloading with minimum labour and time. " having the interior of the pall et lined with suitable material (like frp ) so as to prevent damage to the item being tra nsported. while stacking the item inside the pallet, there should be minimum use of disp osable packing. " the pallet should have firm's logo for identification. firm should als o indicate pl no., description of item on the pallet. note : 1.for packing the individual it em(s), the use of material which are not environment friendly such as wood/polyethen e/plastic is prohibited, however the environment friendly plastic can be used. 2.the ite m should be packed in such a way that it should not rub during transportation. the in- transit damage, if any, shall be at cost of the supplier. 3.the design to be got approved by the firm from cde/rcf before initiating manufacturing. [ warranty period: 30 months af ter the date of delivery ]