Ferrule Tenders

Central Government / Public Sector

CTN :41618243

11 Sep, 2025 NA

Bongaigaon - Assam

Tender For supply of n1jb25023 c c - tube, ss316, 0.25in od x 0.035 in, thickness , ss tube, 0.5inodx0.065inwt , nut and ferrule,0.5in od,pn ss 810 nfset , ss ferrule set 0.25in od pn ss 400 set , male connector, 0.5in,od x 0.5in,npt m , male connector, 0.5in,od x 0.375in,npt m , male connector, 0.5in,od x 0.25in,npt m , male connector, 0.375in,od x 0.5in,npt m , male connector 0.375in od x 0.375in npt m , male connector, 0.375in,od x 0.25in,npt m , swagelok,male connector,0.25inx0.5inmnpt , male connector ss316 0.25in odx0.375in npt m , male conn 0.25 in odx0.25 in npt pn ss 400 1 4 , elbow 90 deg,size 0.5in npt m x0.5in od , ss 400 7 4 ss female connector fnpt , female connector,swagelok,ss 400 7 6 , female connector,0.25in odx0.5in npt f ,ss316 , ss 600 7 4 female connectors ss316 , female connector 0.375in od x 0.375in npt f , female connector 0.375x 0.5 in npt , female conntr,ss,aisi 316,0.5x0.5 , union,ss 316,0.5inod,pn ss 810 6 , union tube 0.25 odx0.25od pn ss 400 6 , union, 0.375 in od, pn ss 600 6 , ss316, union elbow, 0.5in,od, ss 810 9 , union elbow, 0.375in tube od, pn ss 600 9 , ss union elbow 0.25in od,pn ss 400 9 , union tee ss 0.5 in od, pn ss 810 3 , ss union tee 0.375 in od, pn ss 600 3 , union tee 0.25in od pn ss 400 3 , needle valve,0.5in od end conn,ss 1rs8 , needle valve, ss 4jb, 0.25od , ss ball valve 0.5 inch, pn ss 62ts8 , swak sealent, ms pts 50 , red union,ss,aisi 316,0.5x0.25in , red union,ss316,0.5x0.375in od,pn ss 810 6 6 , ss reducing union 0.375in od x0.25 in od , ss tube cap 0.375 in od, pn ss 600 c , plug,ss316,0.5in od pn ss 810 p , 0.25 in ss tube cap ss 400 c ) /bid number : gem/2025/b/6617535 * /dated: 28-08-2025 & & / bid document 1 / 29

Central Government/Public Sector

CTN :41373379

08 Sep, 2025 NA

Kapurthala - Punjab

Tender For corrigendum : supply of stainless steel tubes and & double ferru [stainless steel tubes and & double ferrule fittings for lhb parcel van.

Central Government/Public Sector

CTN :41373383

08 Sep, 2025 NA

Kapurthala - Punjab

Tender For corrigendum : supply,installation,commissioning & test supply,installation,commissioning & testing of stainless steel tubes and double ferrule fittings for lhb non-ac hot buffet car coaches.

Central Government/Public Sector

CTN :41511818

29 Sep, 2025 NA

Jalgaon - Maharashtra

Tender For painting work of signal & telecom gears along with fabrication of signal number plate and various markers, provision of ferrules and location details, and other related work in udhna-jalgaon section of mumbai division, western railway.

Central Government/Public Sector

CTN :41693548

06 Oct, 2025 NA

Chennai - Tamil Nadu

Tender For supply of set of heavy duty aluminium alloy ferrules

State Government

CTN :41617812

18 Sep, 2025 NA

Cachar - Assam

Tender For supply of layer 2 gigabit poe switch , non manageable switch , io box , wall mount rack , utp patch panel , 25 mm cable clip , joint closure , 6mm tape for ferule printer , 12mm tape for ferule printer , pvc conduit flexible pipe , rj-45 jack outlet clip , multimedia projector , 8 step foldable ladder , utp cable manager

State Government

CTN :41276704

15 Sep, 2025 5.42 Lacs

Birsinghpur - Madhya Pradesh

Tender For corrigendum : procurement of various spares of hydrogen plant of sgtps, mppgcl, birsinghpur. - particulars as per tender schedule, needle valve for cooling condenser drain line i) one end match from 10 mm ss line ii) other end is size (tag no. 12b1, b2)moc ss 316, fitting of copper tube for filling h2 gas from manifold to h2 cylinder suitable for 150 kg pressure (pegtail), suction hose for h2 compressor as per enclosed drawing, needle valve at gas filling line a&b steam for 10 mm ss tube line before xa, xf, xa filter.make global, mo cbl no. gv54.pnv, 10 m-s6l-p-t-sf, batch no. 404boae heat no. 1163, 6000/psi, moc ss 316, filter body drain valve (airmatic hp filter 350 kg/cm2) size bv bsp-f, water control valve make-aira/asco, dia port bsp-3/4 ,dia orifice -20mm, max working pressure -16 bar,dimensions as per drg ,a=170mm, b=44mm,c=100 mm, function normally closed ,material valve body bronze, pn -16,disk-brass ptfe insert bsp pilot port rod ss 304 ,pilot pneumatic specification-fluid water, temp fluid +5 c to 180 c,ambient +5 c to 60 c (complies with electrical standards nfc 79300), pressure regulator for hydrogen manifold make esab, diaphragms for pneumatic control valve 2 (50 mm) (neoprene rubber) valve make crescent sl no cpl/2 body material cs, diaphragms for pneumatic control valve 3 (75 mm) (neoprene rubber) valve make crescent sl no cpl/2 body material cs, high pressure hose pipe along with connectors at both end size length 1 mtr ( max working pressure -16 bar), ss tube (10 mm od,5 mm id), male connector 10mm od x10mm npt moc ss316, equal union 10mmx10mm od moc ss316, equal tee 10mmx10mmx10mm od moc ss316, nipple 10mmx1 moc ss316, reducer 1/2 x1/4 moc ss316, elbow 90 size 10mmmoc ss316, nut size 10 mmmoc ss316, ferrule in 2 piece10 mm moc ss 316, .

Central Government/Public Sector

CTN :41613074

22 Sep, 2025 NA

Noida - Uttar Pradesh

Tender For procurement of koel da rkit 26 and ard 25 - cgsd (mbi), air starter, da sea water pump / assembly of raw water pump, automatic voltage regulator,, dv electronic governor with over speed protection, set of joints, starting air pressure sensor, hp pipe assembly, speed control unit, temp sensor with inbuild transmitter (type-mbt5560,range 0-150d, outpu, limit switch, turbo oil drain pipe, double gear assembly, 0-2.5 bar danfoss make pressure transmitter for marine, pf33 individual pump, fuel pipe (from tank to feed pump tee) (marine-abs approved), set of o ring, exhaust temprature sensor with 2pin connector, fuel leakage switch, pump to leak off (marine abs approved), leakoff pipe (uniflex), piston assembly, fuel pipe (feed pump tee to filter in marine - abs approved), turning gear engaged limit switch, fuel pipe (from fuel filter to fip) (marine abs approved), centrifugal oil cleaner (band design), assly. rocker lever, oil filter element, k-coolant (26 lit can), small end bush (finished), belt v section (bx 58-pitchl ength 1520), hose reducer elbo, set of copper washers, fuel pipe (tee to pump inlet gear end) (marine abs approved), fuel pipe tee to feed pump gear end (marine abs approved), leak off pipe (from hp pipe to collector)marine _x0013_ abs approved, fuel pipe (tee to feed pump) (marine abs approved), belt for sea water pump drive, water level switch, thermostat element, hose for turbo compressor out, breather pipe, breather hose for marine, elbow connection, cly.head steel gasket 1.2 mm, bend 90 for feed pump out, top piston ring, exhaust valve, leakoff pipe for hp jacketed pipe (lh), drain cock, hose (dia 54) (bet.2 pipes), oil control ring, fuel pipe (tee to pump in), nozzle body (for oil spray nozzle), second ring piston, inlet valve, bolt (bearing cap), make up pipe, fuse terminal block 6a with 2a fuse link, exhaust valve seat insert, connecting rod bolt, rc joint, m.b.cross bolt (short), clamp(for fuel pipe), joint for governor mounting plate, special nut for exhaust manifold, valve seal, counter shunk head screw (for dv injector leakoff), valve guides, exhaust manifold stud, grommet: 22 dia ferrule, rubber bush (bottom), joint (bet.exh.manifold and expa. bellow), s.s.nut, sealing cap (for dia 25), valve collet, sealing cap (40 din 443)8, o ring: drain plug, grommet: 12 dia ferrule, stud-m10x1.5x25-8.8, set screw m8x1.25x25...8.8, washer copper, cup for valve springs, gasket (lub oil header), washer copper (18x22), plain machined washer - m6, service kit for heat exchanger, fuel feed pump, service kit for centrifugal filter, k cool super plus 50-50 premix 26 liter can, k-cool super plus, bearing, bearing, k sealent (80 ml), flat seal for oil seal housing, oil seal for drive end, conical copper washer, spring, cup for pr tube, flexible bellow, sea water outlet pipe from cac, joint for t connection, joint for sea water pump, joint for sea water piping, pipe for he raw water out, roller tappet assly, rubber sleeve, set bolt-m14x2x60-8.8, dowel pin, k cool plus 26 ltrs can, clamp (2 pipe), crank pulley, inlet valve seat semi-finish, exhaust valve seat semi- finish, cup washer (for nozzle clamp), valve guide, oil seal pulley end, timing pointer (for pulley), air shut off valve, set of main bearings, set of thrust washer, set of gasket for heat exchanger ts6m, oil pipe ( crankcase to pump), hose for air starter, sub assembly of bearing housing, joint cooler cover(rh)from fwe, k-coolant (26 ltrs can), copper washer (18x22), k-sealant, wire braided pipe from jacketed leakoff to fuel collector, temperature guage (0-120 deg), rubber bush (top), pressure guage (0-4 bar), pipe(sea water pump outlet to check valve), o-ring for drain plug, npt plug with zinc bar with he, k sealant 80 ml, drain cock, stud, set screw -m8x1.25x25-8.8, hose clip, copper washer, anti vibration mount - cori, anabond 666t max 25g, hose t bolt, hose clamp, rotary drain pump, k sealant (80 ml), automatic voltage regulator, worm drive hose clip (70mm), se

Central Government/Public Sector

CTN :41618707

08 Sep, 2025 NA

Vellore - Tamil Nadu

Tender For supply of impulse fittings c c - a15191wt32008001.ss316 half inch npt-f-x half inch npt-f- ball valve 3000 psi. as per scope of supply sl no 001 , a15191wt32008002.ss316 half inch npt-m- x half inch od tube male connector 1.65 mm thick double compression ferrule type fitting. as per scope of supply sl no 002 , a15191wt32008003. ss316 half inch od x 1.65 mm thick impulse tubing suitable for double compression ferrule type fitting. as per scope of supply sl no 003 , a15191wt32008004. ss316 quarter inch od x 1.65 mm thick impulse tubing suitable for double compression ferrule type fitting. as per scope of supply sl no 004 , a15191wt32008005.ss316 quarter inch npt-m- x quarter inch od tube male connector 1.65 mm thick double compression ferrule type fitting. as per scope of supply sl no 005 , a15191wt32008006. quarter inch tube union -compression type- moc brass. as per scope of supply sl no 006 , a15191wt32008007. half inch npt-m- x quarter inch od male connector, moc ss316. as per scope of supply sl no 007

Central Government/Public Sector

CTN :41617928

18 Sep, 2025 3.17 Lacs

Anuppur - Madhya Pradesh

Tender For supply of spares parts for parr 6200 bomb calorimeter : : 5 =5 = - oring nbr 238id x 18cs 12 pack , oring nbr 316id x 116cs 12 pack , oring nbr 716id x 116cs 12 pack , ferrule set 18t brass , capsule holder 11361138 , latex tubing 516 id x 125w 7 ft , tubing black latex 3 , tubing nylon 14odx035w 10 ft , tube assembly 6510 , lid seal 6200 , lead wire ignition 2 pack , electrode insulator 2 pack , dual stage oxygen regulator with safety valve

By Cities

By States

By Agencies

By Ownerships

By Sectors