Hook Tenders

Central Government/Public Sector

CTN :43655605

19 Feb, 2026 NA

Katni - Madhya Pradesh

Tender For 25 kv earthing/discharge rod assembly for high rise ohe with working voltage 25 kv ac traction with top clamp (suitable for 36 to 50 mm bus bar and also suitable for 10 to 20 mm dia. conductor) . pole made of cast resin or resin-bonded glass fibre, coated with three coats of poly- urethane, the discharge /earthing pole assembly shall have an overall length of not less than 7.5 meters in five equal sections. single core flexible multi strand annealed copper cable should have double insulation, a cross section of 40 sq mm of size 248/0.45 mm and 14 meter long cable (specification is: 1554 (pt. i)- 1988 and is 2071 (pt. 1 and iii). with earthing double clamp drg. no. eti/ohe/sk/482 or latest (each discharge rod is to be supplied with 02 nos. earting clamps), insulated tee junction- insulated tee junction drg no. eti/ohe/sk/481 and re/33/p/530 or latest (the cable should have an insulated tee junction and the tee clamp should be of brass covered in clamp casing of ebonite material). and whole assembly to be supplied in rugged canvas bag and all shall be as per rdso specification no. eti/ohe/51 (9/87) with latest a and c slip no. 1 (10/92) or latest , and additional part required with each discharge rod to be supply. (1) 01 nos. insulated tee junction. (2) 01 nos. top clamp made of copper suitable for 36 to 50 mm bus bar and also suitable 10 -20 mm dia conductor, (3) 01 nos. spare earthing clamp and. (4) special instruction- 1. discharge rod cable lugs should be made of copper. 2. the cable should have double insulation, a cross- section of 40 sq mm, and 248/0.45 mm strands. 3. the discharge rod should be strong enough to prevent swaying or breaking during maximum extension. every nut and bolt used in the discharge rod must include a washer and spring washer to ensure secure fastening. 5. after the award of the p.o., the firm must ensure approval of one sample of the discharge rod from the consignee before rites inspection. 6. the length of cable from the earthing clamp to top clamp shall not be less than 12.5 mtr. in the cable an insulated tee junction shall be provided at a distance of about 3.5 mtr from the earthing clamp. from this insulated tee junction another piece of cable not less than 1.50 m long shall be provided at the end of which other earthing clamp shall be provided. 7. the galvanized steel tube (threaded) used for coupling of pieces of discharge rod should be at least 20 cm or more as required to prevent swaying of pole assembly during erection at site. also at every 5 cm apart two nos steel rivet is required to be provide on galvanized steel tube ( for preventing the galvanized steel tube from coming out from each discharge rod pole end). i.e. about 08 nos. or more steel rivet as required per galvanized steel tube is to be provided for proper fastening of galvanized steel tube inside the each pole of discharge rod. (warranty period- 30 months after the date of delivery). [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43636860

03 Feb, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply of stopper clamp for breather of gear case

Central Government/Public Sector

CTN :43660825

16 Feb, 2026 NA

Jaipur - Rajasthan

Tender For supply of four pole rcbo 16 amps, 4 pole with type 'd' tripping curve 415 v, 50 hz ac with sensitivity 30 ma residual current, breaking capacity 10 ka, suitable to fi ith din'rail clamps confirming to is 12640, part 2:2008/iec61009-1:1996, pulse current withstand at 8/20 us pulses=3 ka as per part no. aon4p16d + a9v61440 of m/s schneider or equivalent of m/s abb, m/s legrand, m/s lk, m/s siemens (as per rdso letter no. el/7.1.108/sbc/355/non ac coaches dt 14.10.2025)

corporations/Associations/Others

CTN :43663136

28 Jan, 2026 12.00 Lacs

Metturdam - Tamil Nadu

Tender For procurement of stay clamps for 8mtr 200kgs psc pole stay clamps for 9mtr 300kgs psc pole

corporations/Associations/Others

CTN :43663225

28 Jan, 2026 12.00 Lacs

Metturdam - Tamil Nadu

Tender For procurement of back clamps for 8mtr 200kg and 9mtr 300kg psc poles

Central Government/Public Sector

CTN :43647068

02 Feb, 2026 NA

Kokrajhar - Assam

Tender For supply of schedule no. 1 - 100264913 - 10 - m1667862370 - pipe qc,hdpe, pe 80,is 17425,4ksc,75mm , schedule no. 2 100264913 - 20 - m1778864050 - cplr,qc,hdpe,pe80,is 17425,4 ksc,75mm , schedule no. 3 - 100264913 - 30 m1778873070 - saddle,qc,hdpe,pe80,is 17425,4ksc,75mm , schedule no. 4 - 100264913 - 40 m1778866050 - cap qc,hdpe,pe80,is 17425,4ksc,75mm , schedule no. 5 - 100264913 - 50 - m1778869050 - rbr ring,hdpe,pe80,is 17425,4ksc,75mm , schedule no. 6 100264913 - 70 - m1780010809 - clamp dual latch,gi,75mm,hdpe pipe , schedule no. 7 - 100264913 80 - m1778991227 - bend qc,hdpe,is17425,pe80,4ksc,75mm , schedule no. 8 100264913 - 90 - m1778991235 - tee eq,is17425,qc,hdpe,pe80,4ksc,75mm

Central Government/Public Sector

CTN :43647120

10 Feb, 2026 33.17 Lacs

Vijayawada - Andhra Pradesh

Tender For supply of glf spares at vijayawada international airport for year 2025-26 - supply of faa complied and meeting icao annexure-14 requirement medium intensity elevated type omni directional ama make led taxiway edge light fitting with 1w led complete with all accessories including blue lens, lens clamping mechanism, breakable coupling, two pin secondary lead for led and cl base plate with 06 nos of m-10 stainless steel bolts and other accessories etc. complete as required. (make: ama aled)., supply of 1w led blue lamp along with led driver suitable for vardhman make medium intensity elevated type omnidirectional taxiway edge light fitting as required. (make: vardhman), supply of 1w led blue lamp along with led driver suitable for ama make medium intensity elevated type omnidirectional taxiway edge light fitting as required. (make: ama), supply of 35v, operational area led sign board driver, suitable to operate on runway current on series circuit current varying from 2.8 to 6.6 amp. (supply from list of aai preferred makes), supply of 35v, led strip with high luminous long life typically 50,000 hrs., 0.5w, led's assembled on aluminum pcb of size 700mm x 20mm and having 11 led's per pcb for boards. (make: osram), supply of 0.75 sq.mm, 40cm length, copper conductor, frlsh, flexible cable with both side connecters (male/female) suitable to connect to led strips (i.e. item no. 5) (as per aal approved make list), supply of 200 watt, 6.6amp, bi-pin halogen lamp with base g6.35 for runway edge light fitting (similar to model:-osram-64386 or its equivalent from list of aai preferred makes), supply of 150 watt, 6.6amp, halogen lamp with in-built holder base pk30d for runway edge light fitting/approach light fittings / papi units (similar to model: -osram-64361 or its equivalent from list of aai preferred makes), supply of 105 watt, 6.6amp, dichroic reflector lamp with in-built holder with male connector for insert type light fitting (similar to model osram-64339 a or its equivalent from list of aai preferred makes), supply of 200w, 20a/6.6a rating 5000v, 50 hz series isolating transformers encapsulated in black crosslinked polychloroprene compound like tpe /tpr/tpv with primary and secondary connections suitable to be operated via alcms system confirming to specification as required suitable for above mentioned fittings for following applications and compatible to use on alcms (supply from list of aai preferred makes), supply of 200w, 6.6a/6.6a rating 5000v, 50 hz series isolating transformers encapsulated in black crosslinked polychloroprene compound like tpe/tpr/tpv with primary and secondary connections suitable to be operated via alcms system confirming to specification as required suitable for above mentioned fittings for following applications and compatible to use on alcms. (supply from list of aai preferred makes), supply of 100w, 6.6a/6.6a rating 5000v, 50 hz series isolating transformers encapsulated in black crosslinked polychloroprene compound like tpe/tpr/tpv with primary and secondary connections suitable to be operated via alcms system confirming to specification as required. (supply from list of aai preferred makes), supply of 15w, 20a/6.6a rating 5000v, 50 hz series isolating transformers encapsulated in black crosslinked polychloroprene compound like tpe /tpr tpv with primary and secondary connections suitable to be operated via ilcms system confirming to specification as required suitable for above mentioned fittings for following applications and compatible to use on alcms, (supply from list of aai preferred makes), supply of 15w, 6.6/6.6a rating capsulated in polyster resin finally moulded in neoprene rubber for use of 6.6 amps series airfield lighting circuits having nominal voltage rating of 5kv and all rated for operation on 50 hz. the transformer shall be water tight and shall be designed for direct burial in the earth or installation in a base confirming to specification as required. suitable for above mentioned

corporations/Associations/Others

CTN :43306622

27 Jan, 2026 1.94 Crore

Hyderabad-T - Telangana

Tender For corrigendum : supply of neurosurgery implants d d - cv junction and cervical surgery acdfadjustable occipital plate , cv junction and cervical surgery acdfoccipital plate , cv junction and cervical acdf occipital bone cancellous screws all sizes , cv junction and cervical surgery acdf c1 and c2 joint spacer , odontoid screws lag screws all sizes , odontoid screws cortical screws all sizes , polyaxial lateral mass with inner screws of all sizes dual thread screws , rods for lateral mass 40 mm to 300 mm length three and half mm diameter , adjustable occipital rods all sizes , trans-articular screws partial or full threaded all sizes , occipitocervical prebended rods , occipitocervical prebended rod with plates , sublaminar wires upto ninety cms titanium transfacetal screws , cervical transverse connectors , laminar hooks , dominos connectors , tapering rods for cervico dorsal , cervical artificial disc , anterior cervical cages peek , cervical explandable cage titanium , expandable cage , cervical coalition cage and all sizes with self drilling screw lock screw , pyramesh cages mesh of all sizes , cervical disc spacer with locking plate and self drillng screwsof all sizes , cervical expandable cage with plate , anterior cervical plates one level or two level or multi level of all sizes , cervical self tapping or self drilling screws all sizes , adjustable locking screws all sizes , atlas cables , cervical dorsal lumbar sacral polyaxial pedicle inner screws all sizes , cervical dorsal lumbar sacral reduction screws monoaxial inner screws , cervical dorsal lumbar sacral dual thread inner screws , cervical dorsal lumbar sacral hydroxyapatite screws with inner screws , cervical dorsal lumbar sacral fenestrated screws with inner screws , cervical dorsal lumbar sacral bone cement , cervical and dorsal and lumbar and sacral rods for pedicle screws , cervical and dorsal and lumbar and sacral transitional rods , dorsal transverse connectors all sizes , lumbar transverse connectors all sizes , cross connectors , laminar hooks wide blade narrow angled reduced distance open on top sides , lumbar and dorsal vertebral body cylindrical expandable cages , domino connectors dorsal to lumbar , offset connectors , iliac fixation iliac screws all sizes and degrees , iliac connectors , plf and tlif system peek or titanium kidney shaped cages all sizes , plfand tlif system peek or titanium anana shaped cages all sizes , plf and tlif system peek or titanium bullet-shaped cages all sizes //bid details2 / 47

Central Government / Public Sector

CTN :43655020

03 Feb, 2026 NA

Sambalpur - Odisha

Tender For supply and installation of sim based 4g solar ptz camera with 256 gb memory card along with 15 feet or above gi pole with pole mount bracket along with clamps etc (detailed specification attached) to provide a strong concrete foundation in multiple locations (as per proposed location chart attached) in between rair-jsgr station.note: material to be installed as per scope of installation at proposed location chart included in the tender document.

Central Government And Public Sector

CTN :43368518

27 Jan, 2026 22.09 Lacs

Darjeeling - West Bengal

Tender For corrigendum : supply of purchase of 245kv 1250a tp isolator spare of tld 4 ps switchyard : : - q main switch isolator fixed contact assembly 01 pole equal to 1 nos consists of 02 pcs of fc assembly , main switch isolator moving contact assembly , rotating stool base with liver arm or clamp , main switch phase coupling 32nb gi pipe for normal isolator , isolator operating mechanism box with motor , main switch phase coupling 32nb gi pipe for tandem type isolator

By Cities

By States

By Agencies

By Ownerships

By Sectors