Hydraulic Press Tenders

State Government

CTN :45732731

02 Jul, 2026 NA

Rewari - Haryana

Tender For repair and rectification of w/s pipeline leakages found in pvc pipe including excavation, bailing out of water providing and fixing of pvc detachable joint suitable for 6kg cm2 pressure pipe marked with is: 8794 for use with pvc pipe complete with 2 no. rubber ring marked with is and appropriate no. of nuts and bolts marked with is 1363 including carriage in all respect and including of pvc pipe isi marked complete in all respect to the satisfaction of the engineer-in-charge/ac 200 mm i/d class-25/ at gugodh ,repair of 150mm sluice valve including making m.s spendle, g.m. chuck nut, new chimta, nut bolt, rubber jain, glain dori, grease sluice valve opening and fitting at site, carriage charges from site to work shop and work shop to site including labour charge complete as per specification of engineer- in-charge complete in all respect, /150 mm sluice valves repair / at gugodh ,repair of 200mm sluice valve including making m.s spendle, g.m. chuck nut, new chimta, nut bolt, rubber jain, glain dori, grease sluice valve opening and fitting at site labour charge completes as per specification of engineer-in-charge complete in all respect, /200mm / at gugodh

State Government

CTN :45724223

01 Jul, 2026 NA

Rewari - Haryana

Tender For repair and rectification of w/s leakages found in ac pipe c-15 including excavation, bailing out of water providing and fixing of ci detachable joints c-15 suitable for ac pressure pipe marked with is: 8794 for use with ac pipes complete with 2 no. rubber ring marked with is:5382 & is:10292 and appropriate no. of nuts and bolts marked with is 1363 including carriage in all respect and including cost of ac pressure pipe c-15 as per is: 1592 & 2003 complete in all respect to the satisfaction of the engineer-in-charge/ac 100 mm pipe class-15/ at bawwa ,repair and rectification of wis pipeline leakages found in pvc pipe including excavation, bailing out detachable joint suitable for 6kg cm2 pressure pipe marked of nuts and bolts marked with is 1363 the satisfaction of water providing and fixing of pvc with is: 8794 for use with pvc pipe complete with 2 no. rubber ring marked with is and appropriate no. including carriage in all respect and including of pvc pipe isi marked complete in all respect to of the engineer-in-charge/ac 200 mm i/d class-25/at bawwa ,repair of 150mm sluice valve including making m.s spendle, g.m. chuck nut, new chimta, nut bolt, rubber jain, glain dori, grease sluice valve opening and fitting at site, carriage charges from site to work shop and work shop to site including labour charge complete as per specification of engineer-in-charge complete in all respect, /150 mm sluice valves repair / at bawwa

Central Government/Public Sector

CTN :45728946

20 Jul, 2026 1.74 Lacs

Balaghat - Madhya Pradesh

Tender For hydraulic pressing of solid tyres-10.00x20 for lhd machines of balaghat mine.

CTN :45324763

07 Jul, 2026 8.72 Lacs

Jhalrapatan - Rajasthan

Tender For corrigendum : supply of spares for parker and hugland make hydraulic power pack of stacker cum reclaimer of chp at katpp rvun, jhalawar - parker gear pump -27cc/ rec., 275 bar , shaft coupling for motor and pump hub (l- 190) , oil level indicator , oil filter cartridge , pressure gauge (0-280 bar) glycerin filled bcpm , poppet valve for rail clamp power pack , oil filter cartridge , shaft coupling of hugland power pack , bladder for accumulator 2.5 i ltr type (pre charged 9 bar) , bladder for accumulator 1 i ltr type (pre charged 15 bar) , level gauge type- sna-254-b-n , pressure gauge (0-60 bar) type- 2750-63-0-060-21 , pressure gauge (0-400 bar) type- 2750-63-0-0400-21 , butterfly valve ab16s-50-he

CTN :45716528

20 Jul, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of hydraulic automatic hot mounting press equipmentrequired forpreparing metallographic specimen mould

CTN :45321470

07 Jul, 2026 8.72 Lacs

Jhalawar - Rajasthan

Tender For corrigendum : supply of spares for parker and hugland make hydraulic power pack of stacker cum reclaimer of chp at katpp rvun, jhalawar. - spares for parker/hugland make hydraulic power pack , parker's gear pump -27cc/ rec., 275 bar , shaft coupling for motor & pump hub (l-190) , oil level indicator , oil filter cartridge , pressure gauge (0-280 bar) glycerin filled bcpm , poppet valve for rail clamp power pack , oil filter cartridge , shaft coupling of hugland power pack , bladder for accumulator 2.5 i ltr type (pre charged 9 bar) , bladder for accumulator 1 i ltr type (pre charged 15 bar) , level gauge type- sna-254-b-n , pressure gauge (0-60 bar) type- 2750-63-0-060-21 , pressure gauge (0-400 bar) type- 2750-63-0-0400-21 , butterfly valve ab16s-50-he

CTN :45726004

13 Jul, 2026 NA

Tirunelveli - Tamil Nadu

Tender For purchase of mechanical lab equipments - hydraulic cylinder - bore diameter : 50 mm , stroke length : 250 mm, working pressure : 160 bar , cylinder tube : honded steel , piston rod : hard chrome plated , seals : standard industrial seals, end caps : steel, hydraulic operated directional control valve (dcv) - type: manual spool type dc valve, configuration : 4/2 way, size : ng06(cetop 3) , rated pressure : 210 bar, flow capacity: 20 - 40 lpm, body: hardened steel / cast steel, spool: ground and hardened, ports : clearly marked ( p, a, b, t ) , supply : mounted on training plate , suitable for dismantling and study, a) sliding mesh gear box for dismantling and assembing - max transmitted power 1 to 1.5 hp , torque capacity - 40 to 200 nm,number of speed 3 to 6 , gear module 1.5 to 2 , . gearbox type : sliding mesh forward gears - 3, reverse - yes, gear material - alloy steel, lubrication - splash/ oil, gear teeth : spur, typical gear ratio - 3:2:1 / 2:0:1 /1:3:1, input speed : 0-1800 rpm , housing material : cast iron (b) constant mesh gear box cut section - constant mech gearbox (cut section), gearbox type : constant mech, forward gears : 4 , gear teeth- helical/spur ,dog clutch type - sliding ,lubrication - oil sae 80w90 ,housing - cut section,material -hardened alloy steel, educational features - labelled parts, 3d printer - build volume : 256x256x256 cu.mm ,shell enclosed (plastic & glass ),nozzle 0.4 mm stainless steel included ,max hot end temperature 300 c ,nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm, build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate. max build plate temperature 100 c ,max speed of tool head 500 mm/s ,max acceleration of tool head 20 m/s2 ,supported filament pla, petg,tpu, pva, pet,abs, asa chamber monitoring camera low ,rate camera 1280 x 720/0.5 fps ,timelapse supported ,filament run out sensor : yes, control board fan closed loop control ,auxiliary part cooling fan closed loop control ,air filter activated carbon filter

CTN :45738001

11 Jul, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of inch l , micro meter changeable anvil 0 to150 mm , measuring tape steel 3000 mm , precision file square with handle 8 inch comma 2nd cut , precision file half round with handle 8 inch comma 2nd cut , set of hand tap , chest comma tool feet j feet , gauntlets prospective welder leather , brushes steel wire 32 mm , portable welding machine , launch into 431 pr03 with hdiii car or truck , mahindra garuda ii i smart diagnostic tool , jaltest by cajoli ottw off highway equipment diagnostic tool 12v plus 24v , jaltest by cajoli cv truck comma bus comma light commercial vehicle 12v plus 24v , garuda 2vc1 professional grade comma j2534 compliant diagnostic tool for tata cv bs3 comma bs4 comma bs6 , cummins diagnostic tool inline 7 , jcb e into cavator construction diagnostic scanner electronic service tool with diagnostic , banjo washer aluminium , cotton waste , anabond red , o clamp 10 mm , emery paper rough or fine , banjo belt , banjo union , hose pipe 10 mm fle into ible , m seal , araldite big 90 gm , wd 40 rust remover , o ring set o size , valve grinding stick , valve grinding past rough or smooth , battery lead positive and negative , battery terminal h by d positive , battery terminal h by d negative , battery led pb for pole , battery thimble h by d , welding rod , flu into for gas welding , gas welding brazing rod 2 point 5 mm into 450 brass , gas welding brazing rod 2 point 5 mm into 450 aluminum , hand gloves leather , shoes for welding , welding appron leather , electeric holder heavy duty 100 ampere , welding cable copper 28 point 59 mm , stainless steel welding tong , aceteylene regulator , o into ygen regulator , torch with nozzle , supreme high pressure gas welding blow pipe , hose aceteylene gas cly , hose o into ygen gas cly , welding cutter blade size 107 into 1 point 3 into 16 mm , injector stage 3 tool kit , torque wrench , torque wrench digital small , bearing puller , mech jack chassis 10 ton , hydraulic jack chassis 10 to 15 ton , bailey plate jack 3 to 4 ton , magnet stick , ultrasonic cleaner , e-star socket and bit socket set , oil drip tray pan , pneumatic transmission oil filling tool with adaptor , heavy duty socket , vice bench heavy duty , dc test lamp digital automatic circuit tester , stanley 94 to 181 comma 150 piece high quality multi tool kit comma containing spanner comma driver sockets bits comma wrenches , vice bench small size , gauge chisel 38 mm , firmer chisel 26 mm , mortise chiesel 12 mm , combination ston , claw hammer , jack planer , pincer , planer machine , portable rotter machine , side cutting paier , circular saw blade 6 inch three square engineer scrapper with handle 100mm, chisel cold flat 25 mm x 200 mm, chisel 6", 9", hammer engineer's ballpin 400 gm, gauge thickness feeler type 0.03 to 0.5 mm, plier circlip external straight nose, plier circlip internal straight nose, spark plug socket 16 mm, spark plug socket 21 mm, hexagon socket head 0.5 inch square drive 10 mm to 32 mm, master tool kit 150 pcs , recersible rachet 0.5 inch square drive 250 mm, torque wrench 0.5 inch square drive 200 mm, allen key long ball point 10 mm, pad lock, pop spanner 6 x 22 mm, pop spanner 15 x 41 mm, nose plier 8", cutting plier 12", adjustable 12', file flat 6", 12", half round file 6", 12", round file 6", 9", 12", star screw driver 6", 9", 12", oil filter remover, torx key t30, injector remover socket 19 mmfor tata 697 bs iii & 497 bs ii, needle file set r, t & p, hammer electrician 200 gm, clamp on multi meter, digital multi meter, continuity tester, hexagon socket head size 6 mm to 42 mm, spinner handle 0.5 inch square drive, //bid details 2 / 91

CTN :45642888

03 Jul, 2026 50.47 Lacs

Purnia - Bihar

Tender For corrigendum : supply of , frl 1 or 4 inch with pressure guage , quick exhaust valve 1 or 4 festo or norgen , quick exhaust valve 1 or 8 festo or norgen , spray,wd-40 cap- 400ml btl , cassette ss as per kosan carousel , guide rod for kosan introduction unit , 5 or 2 spring return valve , 1 or 2inch -f, ss ball valve , magnetic sensor , tepar strip for 90 deg bend , lock pin,chain conveyor duplex chain , switch,139a714,carousel kosncris - pressure switch , ejection puller arm , ejection pusher arm , needle valve , pneumatic cylinder 12mm or 16mm with fittings , shaft size- 40mm x 280 mm en-8 , shaft size- 40mm x 4000 mm en-8 , nut bolt 1.5inch x 10mm , nut bolt 1inch x10mm , f-mounting , ejection flexible coupling , pneumatic cylinder- 50 or 160- norgen or smc , toggle joint rod- lt-200 mm , pin of non-pneumatic filling gun , bearing no.6206 , bearing no.6304 , gas stop valve lpg 1 or 2inch , steel plate thick 10mm size 0.5mx0.5m , key pad for cuc card steel mk1v , key pad for cuc card mkii , anchor fastener length150mm dia 10mm gi , anchor fastener length150mm dia 12mm gi , anchor fastener length150mm dia 16mm gi , nut bolt length 1inch dia 6 mm , counter bolt 8mm, allenkey type, with lock nut , eye bolt for centering arm , spring,159a533,kosncris pt head , ss rod of gd or pt base , ss block of gd or pt base , linear bearing , optical cable for bar code sensor , automatic hot air sealing head , pneumatic cylinder size 500mmx50 norgan , 50 dia sealkit norgren , 50 dia sealkit janatics , solenoid coil for kosan filling scale- smc make , lpg hose of length 1 m , lpg hose of length 1.5 m , lpg hose of length 0.5 m , pencil sensor , rivet type conveyor chain , rod of kosan filling gun pneumatic type , kosan filling gun cup , dampner or kosan filling gun bush , kosan filling scale leg , lower bell for gd , vibration absorber for gd head , kosan fintec load cell for filling scale 200kg , load cell for jisl adjustment scale 650 kg , manual cvt head,kpot0122 carousel,kosncr , lifter plate for check scale , c channel of conveyor , telescopic boom pipe length 6m dia 1.5inch , drag chain , boom e plate with taflon ss thickness-10mm 1mx1m with taflon 12mm , mark iv display , reflector for kosan carousel , lpg filling gun pneumatic type , pneumatic counter , vacuum or suction indicator

CTN :45728074

22 Jul, 2026 NA

Kolkata - West Bengal

Tender For supply of hydraulic installation tools with nose assembly for 7/8" lock bolt, cylinder diameter 115 mm, length of cylinder 242 mm, usable stroke 65 mm, maximum pull pressure 585 kg/sq cm, maximum return pressure 220 kg/sq cm, tool weight 17 kg approx, compatible with hydraulic power rig model no cs-lb pp1of make crimpwell services-kolkata. [ warranty period: 30 months after the date of delivery ] ]

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector