Lab Equipment Tenders

Central Government/Public Sector

CTN :45708601

31 Jul, 2026 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : supply of buffer projection gauge accuracy of gauge should be +/- 1.0mm, measuring range of 570mmto 665mm. note:- material to be supplied along with calibration certificate by nabl approved lab and elegantly finished well padded wooden storing and transportation box with working manual. make/brand- pie or prasad engineering or ganapathy, model bpg-1 or similar. [ warranty period: 30 months after the date ofdelivery ] ]

Central Government/Public Sector

CTN :45419739

04 Jul, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - laboratory; substation, electrical system or installation; service provider

State Government

CTN :45735186

14 Jul, 2026 55.00 Lacs

Nanded - Maharashtra

Tender For re-e-tender no.06-2026 for supply of electrical materials for engineering department, srtmun

Central Government/Public Sector

CTN :45737814

15 Jul, 2026 NA

Mumbai - Maharashtra

Tender For providing of goods transportation service - monthly based service - outside city within state; hiring of truck of loading capacity 4 point 5 mt and running upto 2000 km per month with 24 hours availability for leading of engineering machines materials & men a..

Central Government/Public Sector

CTN :45731118

06 Jul, 2026 NA

Multi City - Multi State

Tender For 5hp non clog submersible sewage pump set, pumping capacity 72 cubic meter per hour at 8 mtrs head with speed 1450 rpm, complete with water protected seal for continuous operating 415v, 50 hz, supply with 10 mtrs, resin filled control cable and 10mtrs s.s chain with shackle and suitable fully automatic three phase starter control panel( dol/star delta starter which is suitable for that pump) along with single phase preventer with phase reversal sensing and dry run relay protection (current sensing type), thermistor relay and moisture control relay, analog /digital voltmeter , analog /digital ammeter , power on/trip and indication lamps, on/off switch and auto/manual mode switch (authorized dealership certificate to be enclosed while submitting offer, test certificate and warranty certificate to be submitted along with supply). make: ksb, kirloskar, mbh. karvel or similar [ warranty period: 30 months after the date of delivery] ]

Central Government/Public Sector

CTN :45551224

03 Jul, 2026 NA

Villupuram - Tamil Nadu

Tender For corrigendum : dn/mas acting for and on behalf of the president of india invites e-tenders against tender no m-sg-2026-515-ms_vm-2 closing date/time 03/07/2026 15:00 hrs. bidders will be able to submit their original/revised bidsupto closing date and time only. manual o ers are not allowed against this tender, and any such manual o er receivedshall be ignored.1. nit headername of worksignalling and telecom portion of work in connection withengineering works in chennai beach(msb)-villupuram(vm)section overchennai division.(msb-vm-2026-2)bidding typenormal tendertender typeopenbidding systemsingle packet systemtender closing datetime03/07/2026 15:00date time of uploadingtender09/06/2026 16:19pre-bid conferencerequirednopre-bid conference datetimenot applicableadvertised value 14550242.18tendering section signalbidding style[ decision at schedulelevel ]bidding unitearnest money (rs.) 291000.00validity of offer ( days) 60tender doc. cost (rs.)0.00period of completion 12 monthscontract type works - general contract category expenditurebidding start date 19/06/2026are jv allowed to bid nonumber of jv memberallowed0are consortium allowedto bidnonumber of consortiummember allowed0ranking order for bidslowest to highest expenditure typecapital (works)2. schedules.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () a-sor 2022 items9145422.44above/below/par1please see item breakup for details. 9145422.44 at par9145422.44description:- sor 2022 itemss.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () b-non sor items5404819.7411 3900.00numbers 100.00 390000.00 at par 390000.00 rs.description:- provision of 7.2 mm holes in old/new rails to provide continuity bonding /polaritybonding etc (all other material required for the work shall be supplied by contractor) (this scheduleincludes the xing of bond wire in the 7.2 mm hole). the bond wire and channel bond pins will besupplied by railways)22606.00numbers 670.00 406020.00 at par 406020.00 rs.description:- releasing and re xing of tld boxes in dc track circuits. (this work includes releasingthe existing track connections and reconnecting the track connections after the completion of workalong with provision of necessary holes for connecting lead wires and painting of track particulars.all the materials required for the above work shall be supplied by the contractor as per the directionof the rly engineer at site.3360.00numbers7400.00 444000.00 at par 444000.00 rs.description:- re xing of released point m/c (all types) and its gound connections (existing pointmachine) including wiring and termination in point m/c and interconnections between point m/c andct box through pvc hose pipe and painting (all types of insulations connected to point work , alltypes of bolts and nuts, washer springs/ at , pvc hose pipe, 3/0.75 sq.mm copper wire,7/1.4 sq.mmcopper wire, paints and other miscellaneous items shall be supplied by the contractor). the workshall be carried out as per the instruction of engineer at site.4110.00numbers3600.00 396000.00 at par 396000.00 rs.page 1 of 16run date/time: 09/06/2026 16:19:30chennai division-s and t/southern rlytender documenttender no: m-sg-2026-515-ms_vm-2closing date/time: 03/07/2026 15:004description:- releasing and re xing of cable termination box for point machine (existing pt ctbox)- this work involves breaking of concrete andreleasing the existing cabletermination box andkeep it a side casting of foundation and erection of the released ctbox and carrying out the interconnection between point machine and ct box. the work shall be carried out as per the instrution ofengineer at site.55141.00numbers3771.78 531820.98 at par 531820.98 rs.description:- all type point machine ground connections to be released carefully withoutdamaging, kept aside and re- x the same after completion of engineering work. the work shall becarried out as per the instruction of engineer at site.66 8000.00numbers 5.70 4560

State Government

CTN :45729889

24 Jul, 2026 94.38 Crore

Rajkot - Gujarat

Tender For site survey, designing, engineering, procurement, supply, loading, transportation, unloading, insurance, delivery at site, handling, storage, installation, testing, commissioning including documentation of all items/material required to complete works for turnkey based contract for supply, installation, testing & commissioning of 11 kv ring main unit with fencing under area of rajkot city circle - pgvcl with gis mapping / geo urja mapping (developed by guvnl) and asset tagging under si scheme

State Government

CTN :45654859

06 Jul, 2026 3.00 Lacs

Bhavnagar - Gujarat

Tender For corrigendum : tender for comprehensive annual maintenance contract (camc) of cctv surveillance system including supply, repairing, replacement, installation, configuration and maintenance of cctv equipments installed at division office, lab, store and all sub-division offices under rural division, pgvcl bhavnagar.

State Government

CTN :44231929

13 Jul, 2026 NA

Jamnagar - Gujarat

Tender For corrigendum : supply of various consumable material at emd -1 lighting dept. stps. - flat cable 3 corex4 sqmm with copper conductor for submersible motor, flexible copper wire 1 corex2.5 sqmm (36/0.3 mm)1100v(1 coil is equal to 90 meter), flexible copper wire 1 corex1.5 sqmm (22 / 0.03) voltage grade up tp 1100 volt conf to is- 694, copper cable 2 cx1.5 sqmm, pvc twin wire 2.5mm sqr., self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of red colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of yellow colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of blue colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of black colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of green colour, porcelin kit kat fuse 16 amp, porcelain kit kat fuse 63 amp, 415 v , ac, porcelain kit kat fuse 100 amp, 415 v , ac, porcelain kit kat fuse 200 amp, 415 v , ac, din rail mounting channels, ring spanner set model 1812 taparia make, double ended spanner set dep 12, adjustable screw spanner size 8" (200 mm) p.no.1171-8 p, screw driver (tester) taparia product no: 818.special with neon bulb, generally confirming to is 5579-1985 grade - ii, yellow handle,, taparia combination plier, product no.1621-8,210 mm, digital insulation tester, range-0-2000 m-ohm, selectable test voltage-250/500/1000 v dc with rechargeable battery, digital clamp on meter lcd display with backlight, 3-3/4 digit., alluminium ladder self supported a type having 05 feet length, long nose plier insulated with thick c.a. sleeve,165 mm length, taparia make tool, allen key set, product no aki 10, allen key set mm size (09 piece) 1.5,2,2.5,3,4,5,6,8,10 mm, hand drill machine size 13mm, hand grinder machine., aluminium tube terminals10.0 mm2, m.6, aluminium tube terminals16.0 mm2, m6, aluminium tube terminal 35 sqmm,m 8, aluminium tube terminals50.0 mm2, m10, aluminium tube terminals70.0 mm2, m8, aluminium tube terminals95 .0 mm2, m10, pin terminal 1.5 mm2, pin terminal 2.5 mm2, aluminium in line connector25.0 mm2,, 35mm alluminium in line connector als-2"dowell", aluminium in line connector 70 mm2, 95 sqmm crimping alluminium type in-line connectors cat no: hai-15 hex make, crimping tools capacity: 10 mm2 to 185 mm2., crimping tools, capacity: 6 mm2 to 50 mm2., alluminum ring type lug 25 sq. mm, pvc saddle 10 mm, pvc saddle 15 mm, pvc saddle 20 mm, pvc saddle 32 mm, multistrend copper flexible wire 1 core x 4.0 mm2, (7 strendes) pvc (double) insulated, without armourr, 1.1kv grade (100m/coil)

Central Government/Public Sector

CTN :45713835

18 Jul, 2026 30.00 Lacs

Mumbai - Maharashtra

Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

By Cities

By States

By Agencies

By Ownerships

By Sectors