Ladder Tenders

Central Government/Public Sector

CTN :45141813

21 May, 2026 NA

Kolkata - West Bengal

Tender For design, engineering, supply, installation, testing and commissioning of outdoor type p4-led video wall display with technical and software support with 2 years comprehensive warranty and 3 years comprehensive maintenance at the indian bank champadali more branch barasat

Central Government/Public Sector

CTN :45160910

21 May, 2026 12.79 Lacs

Shimla - Himachal Pradesh

Tender For construction of retaining wall in front of sos barrack temp. at atc ssb kumarsain, h.p.

State Government

CTN :45054608

01 May, 2026 302.33 Crore

Katihar - Bihar

Tender For corrigendum : comprehensive maintenance of ward level water supply schemes (quality affected), i/c the cost of chemicals, overhauling of filter media and related appurtenances, cleaning of esr and campus, maintenance viz. cleaning painting of pump house, boundary wall, repair of leakages in distribution line, repair and provision of new fhtcs, repair and maintenance of pumps and other electromechanical components operation of ward level piped water supply schemes (quality affected) by deploying pump operators and payment of electricity charges etc. all complete as per the directions of engineer-in-charge. in , applicable for the "hgnj" project of p.h. division, katihar in 11 nos pws and 2774 nos wls in different wards of different panchayat under block- katihar,pranpur,barari,manihari,amdabad,mansahi,sonaili,dandkhora, hasanganj, barsoi, azamnagar, balrampur, kusela, korha, falka, sameli under p.h. division, katihar.

State Government

CTN :45163815

28 May, 2026 31.24 Crore

Raipur - Chhattisgarh

Tender For design, drawing, construction, testing, commissioning of intake well 6m dia 22m height approach bridge 45m length, approach road, electric sub station 250 kva/11/.415 kv with all required work,raw water v.t. pumps and motors 03 no each of 15hp which can discharge 88076 lph against totalhead of29 m at near village katkona, 3.0 mld conventional type water treatment plant, 02-nos of clear water centrifugal pumps and motors each of 12.5 h.p. which can discharge ,25963 lph against head of 65m head and 3 nos of centrifugal pump of 95 h.p. which can discharge 71572 lph against 223m head ,along with the construction of 3 no of mbr,mbr-1 at village near salka 110 kl capacity 30 m staging mbr-2, 60 kl capacity 30 m staging at village katkona, mbr-3 215 kl capacity 30 m staging at village koda, providing, laying, jointing and testing & commissioning of raw water pumping main di k-9 250 mm dia length 250 m and clear water pumping main 150 mm dia di k-9 length 2810 m,200mm dia length 19109m,250 mm dia 4905m total 26824 m&clear water gravity mains pipe o-pvc pn-25 250mm dia – 6343m, ,250mm diao-pvc pn-16 -2063 mtr,160 mm diao-pvcpn-16– 31051m,110 mm diao-pvc pn -16-47136 m . total length- 86593 m with all required valves & specials as per attached key plan map, providing and fixing bulk flow meters, ,nala crossing and work include taking permission to department. likepwd, wrd etc. allied all civil works including boundary wall around wtp campus. work completion is 12monthsincluding rainy season integrationof all component,testing& trial run comprises of 03 month testing & 09 month trial run (with defect liability period of one year),balance work under bardar- multi-village water supply scheme of block khadgawan, district m.c.b (c.g.) (on risk and cost basis).

State Government

CTN :45164690

01 Jun, 2026 58.77 Lacs

Indore - Madhya Pradesh

Tender For construction of protection wall of ratankhedi barrage.

Central Government/Public Sector

CTN :45167053

08 Jun, 2026 NA

Merta - Rajasthan

Tender For supply of aluminium wall supporting-sliding ladders, height 50 foot as per attached spec. [ warrantyperiod: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :45151622

18 May, 2026 9.74 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of children play equipments, open air gym, in various parks in dhanas, chandigarh, under wdf - providing and fixing of swing ( 2 seater) 10 long 8 -6 high & 5 -0 wide made out of 2 m.s. pipe completed as per drg no. 02 job no. m-06 and to the entire satisfaction of engineer-in-charge, providing & fixing of wide slide ssarea : 3.9 m x 1.3 msafe play area : 4.9 m x 2.3 mplatform height : 1.2 mthe wide slide on of the attractive slides of its kind. the chute is made up of 14 swg ss/gi sheet. the stainless steel used is of 304 grades. the chute is supported by 40x5 ms angle. this chute is attached to the platform made from ss/g sheet. the platform is supported by 40 nb gi pipe. the ladder is made using 20 nb and 25 nb gi pipes. the steps for the ladder is made are of 20 nb gi pipes. the sliding height is 2.4m. the landing support used is made up of 25 nb pipe. the handrail of the chute is made up of 20nb power coated gi pipe. the slide is innovative wide slide on which at a time 3 kids can slide., providing & fixing of multi activity play system (ii) (maps ii):deck 3 ht. 1 deck 2.5 ht. 1 frp staircase 3 ht. 1 frp curve slide 3 ht. 1rainbow ladder 1 double swing 1 bubble pannel 1 steering 1area: 7mx5m safe area: 8mx6m 1. deck 3 height & 2.5 height - the deck of maps is made up of 4mm thickness fiberglass reinforced plastic. the top of the platform shall be made up of anti skid surface with multicolored pigment resign. all the attachments is through nylon clamps only. the size of platform is 1.6mx1.6m. 2. frp stairs case - the ladder shall be made up of the fiber reinforced plastic with a thickness of 4mm. it should have reinforcement to maintain strength and avoid bending. 3. frp curve slide- it is made up of 4mm thickness fiber reinforced plastic. 4. rainbow ladder- it is 5 long in height, the main frame of ladder is made up 20 nb g.i. pipe and risers are made up of 40 nb g.i. pipes. 5. double swing.-leg support in 40 nb g.i. pipe and top pipe is made up of 50 nb g.i. pipe seat is made up of 10 mm reinforced rubbers and g.i. pipe should be rubber coated and movement with nylon clamps at top. 6. bubble panel.-the railing is providing to all decks for safety and it is made up of lldpe. 7. steering wheel-it is made up of lldpe., providing and fixing of chest press double complete in all respects having following specifications. size / dimensions- length -1200 milimeter, width- 700 milimeter, height 1800 milimeter maximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions. colour:- green, paint finish- power coated, uv resistant, paint coating thickness (min) 100 micrometer, warranty - 3 years. co

Central Government And Public Sector

CTN :45166108

19 May, 2026 NA

Lumding - Assam

Tender For supply of aluminium platform step ladder, double-side step type, 12 ft height, fabricated from anodized aluminium, with platform size approx. 300 ? 250 mm, anti-skid steps (-2.5 inch width), foldabledesign, anti-skid rubber feet, and minimum load capacity -150?160 kg, suitable for maintenance use. make:agaro/bathla/alco [ warranty period: 30 months after the date of delivery ]

State Government

CTN :44943248

20 May, 2026 46.85 Lacs

Anuppur - Madhya Pradesh

Tender For corrigendum : tender for construction providing and fixing ofwind breaking barrier curtain wall with 0.5mm thick pre coated profile sheet at ash dyke (phase-iii) pond no.01 at atps chachai.

State Government

CTN :44829010

21 May, 2026 NA

Kullu - Himachal Pradesh

Tender For corrigendum : providing protection structures from existing damaged crate wall at the dumping site near 132-33kv gis substation, barsaini, distt. kullu, (h.p).

By Cities

By States

By Agencies

By Ownerships

By Sectors