Lock Tenders

Central Government/Public Sector

CTN :45605298

18 Jul, 2026 NA

Chittaranjan - West Bengal

Tender For corrigendum : supply of high tensile transition cb coupler(top operated) with top lifting hook, top lifting assembly & link for top operation in fitted condition but without high capacity draft gear, striker block & suspension hook (for tr screw coupling)as per rdso drg no. sk.dl-4809 alt. 1 or latest item no. 1 to 8, 12 to 14, 35 to 40, 42 & 46 to 53. except item no.- 9 to 11, 15 to 34, 41, 43 to 45 for wag-9hc locomotive. as per drg.no. skdl-4809 alt.1 as per specn. rdso specn. no. 56-bd-07 m.a no.2 or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45733184

08 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - 98050126]scrap cond./released/unserviceable ms scrap such as cbc coupler bodies, angels channels, signal rods, dash pot, yokes, draft gears sets, ms sheets, winch for lc gate, lever lock, lever rods, pull rods, suspension tube, bracket cl, housing axle bearing, chequered plates, cbc operating handle, rail cutter, rel hook, anti roll bracket, dredger drum, chain, centering disc, ms liners, center pivot washer, center pivot ring, side frame key, adopter narrow jaw, anti roll bar, wear plate, adopter wide jaw, suspension rods ,equalizing stay, erc clips, rail flange, chain hook, rotary shield with bearings, sab parts, ls beam, hangers, brake levers, brake hangers, adapter broken, center pivot top, anvil, workout sab, plate screws, transformer body and its ms parts, knuckle, fabricated test rig, gear wheel, anchor link, brake beam cut parts, axle box housing, bearing plates, rivette, chair plate, ms bed plate, ms gauge tie plate, structure bar, ms tie plates, slide chaires, center pivot, tamping tools, jim crow, cribs, track machine parts, locking plate, operating handle, cbc lock, cbc yoke, lower spring sheet beam, rail tong, center beams, screw couplings, lower spring sheet beam, cut pieces of pipes, buffers, buffer plungers, buffer casings, draw gear hooks, iron rods, wire, bolt & nut and other items coming under ms scrap on as is where is condition is available under the custody of cdms 08 ward ap. note: 1.pick and choose of the material are not allowed. loading to be started from one end and to be ended on other end only.(loc:bin no. 121 at scrap yard)

Central Government/Public Sector

CTN :45735808

16 Jul, 2026 NA

Bengaluru - Karnataka

Tender For supply of kit for locking arrangement for center pivot pin to drg. no. wd-85079/s-2, alt-28 consisting of (1) shackle lock- item no 7, (2) pin- item no 8, (3) split pin to size 3.5mm dia and 50mm length. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45741799

14 Jul, 2026 NA

Pune - Maharashtra

Tender For supply of shackle lock and lock pin for centre pivot pin to rdsos drg no. wd-85079-s/2, item no. 7 & 8, alt.no. 26 (twenty six) or latest. [ warranty period: 30 months after the date of delivery ]]

Central Government/Public Sector

CTN :45730943

02 Jul, 2026 NA

Pune - Maharashtra

Tender For supply of locker cabinet of ms , colour -silver or any other colour like silver gray, grey, bottle green etc...... specification:- steel cloths 12 cage locker. type of locker:- 12 locker. material of locker:- mild steel. material of door handle:- electroplated ms handle. locking system:- 5 lever lock. colour of locker:- ilver or any other colour like silver gray, grey, bottle green etc...... [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45742484

14 Jul, 2026 NA

Palakkad - Kerala

Tender For supply of padlocks (????) conforming to is 15275 (q3)

Central Government/Public Sector

CTN :45713850

11 Jul, 2026 27.00 Lacs

Delhi - Delhi

Tender For repair/replacement to doors, window, ventilators, cupboards, flooring/ plastering, tilling and other miscellaneous joinery /sanitary items at af stn aastha complex, 5 aflu under aor of ge (af) faridabad - demolition/dismantling of brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc, complete all as specified and directed., m&l for brickwork with subclass b bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cm 1:6 complete all as specified and directed., all as per item no 02.00 above but except bricks., m&l for brick work with sub class b bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in cm 1:4 complete all as specified and directed., taking down cement plaster of any description on concrete surfaces such as soffit of rcc slab, chajjas and brick walls, ceiing etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed., m&l for rendering 15 mm thick cement plaster in cm 1:6 on brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed., m&l for rendering 15mm thick in cm 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl wpc as per user manual complete all as specified and directed., m&l for rendering 10mm thick in cm 1:3 over concrete surface as on ceiling, chajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed., m & l for preparation of new plastered surface and applying two coats of oil emulsion distemper on wall over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., m&l for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., m & l for preparation of new plastered surface and applying two coats of oil emulsion distemper on ceiling over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., taking down chowkhats or frames with shutters not exc. 1.5 sqm each (without taking off shutters from the frames) complete all as specified and directed., taking down chowkhats or frames with shutters exc 1.5 sqm but not exc. 4 sqm each (without taking off shutters from the frames) complete all as specified and directed., taking down shutters of any description n exc 1 sqm each complete all as specified and directed., taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed., s&f for 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed., s & f solid pvc door frame of size 50 x 47 mm made out of 5 mm plain colour pvc sheet reinforced with ms square tube incl taking down old frame any type complete all as specified and directed., s&f factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of ms tubes for top & bottom rails ms frame shall be convered with heat moulded plain colour pvc `c channel having a pvc sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour pvc sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain c

Central Government/Public Sector

CTN :45713438

09 Jul, 2026 NA

Haridwar - Uttarakhand

Tender For complete machining, grinding, nitriding, carburizing and coating (as applicable) of dabg items. - gear sector, gear, sector (rh), gear, sector (lh), upper sprocket, rack gear, pinion, lever, link,clevis, t-lock, splined

Central Government / Public Sector

CTN :45737589

27 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of lock lift lever assembly,to drawing/ specification rdso spec. no.wd-70-bd-10(rev.-4),rdso drg. no. sk-62724, alt. no.-32, item no.-5,6,7,16 & 17 in assembled condition. [ warranty period: 72 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45619878

06 Jul, 2026 NA

Raigad - Maharashtra

Tender For corrigendum : tender for supply of block friction 527767-81 , conveyor pulley centrifug , pin 323 , pin 222119-14 , pkg. 223436-19 , ring rubber 64101 , ring rubber 70942 , ring seal 223521-17 , ring o 66555 , ring o 223406-26 , spinde bowl 522988-01 , spring 226214-43 , worm wheel 515799-02 , coupling shar , pin for gear pump couplg , coupling hub on motor , spring casing centrifuge

By Cities

By States

By Agencies

By Ownerships

By Sectors